arXiv subjects

Leora Dresselhaus-Marais

Publications and source records attributed to Leora Dresselhaus-Marais.

10 recordsLinked to original sources

arXiv2026

Cumulative X-ray Damage in Bismuth Selenide Examined by Simultaneous TXM and XRD

Bismuth selenide (Bi2Se3) is a topological insulator with potential applications in thermoelectrics, spintronics, and optoelectronics. However, its response to radiation remains poorly understood. We investigate cumulative X-ray damage in Bi2Se3 using simultane- ous transmission X-ray microscopy (TXM) and X-ray diffraction (XRD) at the Pohang Accelerator Laboratory X-Ray Free Electron Laser (PAL-XFEL) over 27,000 successive pulses. We observe distinct damage mechanisms: rapid hole formation via vaporization within 100 pulses, followed by slower grain refinement and material sputtering over thousands of thermal cycles. Williamson-Hall analysis reveals a progressive transformation from single-crystal to nanocrystalline structure, with grain sizes decreasing from mi- cron to nanometer scale. Finite-element modeling confirms that X-rays penetrate 13.47 μm, driving local temperatures above 1600 K with subsequent cooling between pulses. Scanning electron microscopy identifies three characteristic morphologies correspond- ing to different thermal histories: sputter streaks, prismatic crystals, and disordered microcrystals. Our results demonstrate that grain-boundary formation creates a feedback mechanism that accelerates damage in later pulses. This work establishes a method- ology for studying radiation damage across multiple length scales and provides insight into topological insulator stability under extreme conditions

cond-mat.mtrl-sci↗

arXiv2026

Dynamical diffraction formalism for imaging time-dependent diffuse scattering from coherent phonons with Dark-Field X-ray Microscopy

Coherent acoustic phonons, whose damping sets the upper bound of quality factors in acoustic resonators, play a critical role in advanced telecommunication and quantum information technologies. Yet, probing their decay in the GHz regime remains challenging using conventional surface-based techniques. Dark-field X-ray microscopy (DFXM) offers a solution by enabling through-depth, non-destructive and full-field imaging of strain fields and dislocations inside bulk materials with high spatial and angular resolution. We previously used kinematic diffraction theory to describe DFXM signals based on how the Bragg peak shifts due to the strain wave, allowing us to reconstruct the frequency spectrum of coherent phonons as a function of depth through the sample. The approach of tracking the Bragg peak shifts to study phonon dynamics, however, places an upper-bound to the highest phonon frequency that can be studied, determined by the spatial resolution of the measurement. In this work, we discuss how coherent phonon dynamics can be studied with DFXM from time-dependent intensity oscillation sidebands. This approach simultaneously allows studying coherent phonon dynamics in real and reciprocal space, overcoming frequency resolution limits imposed by the real-space resolution of Bragg-peak tracking. Using Takagi-Taupin dynamical diffraction formalism, we establish the spatial and reciprocal space resolution achievable for studying the coherent phonon dynamics and evaluate conditions for observing long-lived intensity oscillations. We close by proposing experimental strategies to optimize excitation bandwidths and reciprocal-space selectivity. The formalism in the paper enables the design of DFXM experiments for quantitative, frequency-resolved measurements of acoustic phonon decay and phonon-defect interactions in bulk crystalline materials.

cond-mat.mes-hall↗

arXiv2025

Phase transitions of eutectic high entropy alloy AlCoCrFeNi2.1 under shock compression

High entropy alloys (HEAs) are a new class of metals that exhibit unique mechanical performance. Among HEAs, additively manufactured eutectic high entropy alloys (AM-EHEAs) have recently emerged as candidate materials for use in extreme conditions due to their simultaneous high strength and ductility. However, the deformation and structural evolution of AM-EHEAs under conditions of high pressure have not been well characterized, limiting their use in extreme applications. We present dynamic compression experiments and molecular dynamics simulations studying the structural evolution of AM-EHEA AlCoCrFeNi2.1 when compressed to pressures up to 400 GPa. Our in-situ X-ray diffraction measurements capture the appearance of fcc and bcc phases at different pressure conditions, with pure- and mixed-phase regions. Understanding the phase stability and structural evolution of the AM EHEA offers new insights to guide the development of high-performance complex materials for extreme conditions.

cond-mat.mtrl-sci↗

arXiv2025

Computation and Sensitivity Analysis of the Deformation-Gradient Tensor Reconstruction in Dark-Field X-ray Microscopy

Spatially resolved strain measurements are crucial to understanding the properties of engineering materials. Although strain measurements utilizing techniques such as transmission electron microscopy and electron backscatter diffraction offer high spatial resolution, they are limited to surface or thin samples. X-ray diffraction methods, including Bragg Coherent Diffraction Imaging and X-ray topography, enable strain measurements deep inside bulk materials but face challenges in simultaneously achieving both high spatial resolution and large field-of-view. Dark-field X-ray Microscopy (DFXM) offers a promising solution with its ability to image bulk crystals at the nanoscale while offering a field-of-view approaching a few hundred $μ$m. However, an inverse modeling framework to explicitly relate the angular shifts in DFXM to the strain and lattice rotation tensors is lacking. In this paper, we develop such an inverse modeling formalism. Using the oblique diffraction geometry, enabling access to noncoplanar symmetry-equivalent reflections, we demonstrate that the reconstruction of the full deformation gradient tensor ($\mathbf{F^{(g)}}$) is possible. We also develop the computational framework to both forward calculate the anticipated angular shifts and reconstruct the average $\mathbf{F^{(g)}}$ for an individual pixel from DFXM experiments. Finally, utilizing the established formalism and computational framework, we present methods for sensitivity analysis to relate individual components of the rotation or strain tensor to specific angles of DFXM. The developed sensitivity analysis also enables explicit computation of the errors associated with the reconstruction of each component. The formalism, the computational framework, and the sensitivity analysis established in this paper should assist both the interpretation of past DFXM experiments and the design of future DFXM experiments.

cond-mat.mtrl-sci↗

arXiv2025

Laser, Vacuum, and Gas Reaction Chamber for Operando Measurements at NSLS-II's 28-ID-2

We present a laser reaction chamber that we developed for in-situ/operando X-ray diffraction measurements at the NSLS-II 28-ID-2 XPD (X-Ray Powder Diffraction) beamline. This chamber allows for rapid and dynamic sample heating under specialized gas environments, spanning ambient conditions down to vacuum pressures. We demonstrate the capabilities of this setup through two applications: laser-driven heating in polycrystalline iron oxide and in single crystal WTe2. Our measurements reveal the ability to resolve chemical reaction kinetics over minutes with 1-s time resolution. This setup advances opportunities for in-situ/operando XRD studies in both bulk and single crystal materials.

physics.ins-det↗

arXiv2025

Analytical model for balling defects in laser melting using rivulet theory and solidification

In the laser welding and additive manufacturing (AM) communities, the balling defect is primarily attributed to the action of fluid instabilities with a few authors suggesting other mechanisms. Without commenting on the validity of the fluid instability driven \textit{mechanism} of balling in AM, this work intends to present the most realistic analytical discussion of the balling defect driven purely by fluid instabilities. Synchrotron-based X-ray radiography of thin samples indicate that fluid instability growth rates and solidification can be comparable in magnitude and thus compete. Neglecting the action of fluid flows and heat transport, this work presents an analytical formalism which accounts for fluid instabilities and solidification competition, giving a continuous transition from balling to non-balling which is lacking in current literature. We adapt a Rivulet instability model from the fluid physics community to account for the stabilizing effects of the substrate which the Plateau-Rayleigh instability model does not account for, and estimate the instability growth rate. Our model predicts instability growth at higher wavelengths and shallower melt pool depths relative to width, as well as strong sensitivity to the solidification front curvature. Deviations between model predictions and our experimental results demonstrate the importance of fluid flows and heat transport in the balling process. Our experiments further demonstrate at least one mechanism by which the melt pool length and balling wavelength are not equivalent, as commonly claimed.

physics.flu-dyn↗

arXiv2024

Measuring the Burgers Vector of Dislocations with Dark-Field X-ray Microscopy

The behavior of dislocations is essential to understand material properties, but their subsurface dynamics that are representative of bulk phenomena cannot be resolved by conventional transmission electron microscopy (TEM). Dark field X-ray microscope (DFXM) was recently demonstrated to image hierarchical structures of bulk dislocations by imaging lattice distortions along the transmitted X-ray diffracted beam using an objective lens. While today's DFXM can effectively map the line vector of dislocations, it still cannot quantify the Burgers vector required to understand dislocation interactions, structures, and energies. Our study formulates a theoretical model of how DFXM images collected along specific scans can be used to directly measure the Burgers vector of a dislocation. By revisiting the "invisibility criteria" from TEM theory, we re-solve this formalism for DFXM and extend it to the geometric-optics model developed for DFXM to evaluate how the images acquired from different scans about a single {hkl} diffraction peak encode the Burgers vector within them. We demonstrate this for edge, screw, and mixed dislocations and discuss the observed symmetries. This work advances our understanding of DFXM to establish its capabilities to connect bulk experiments to dislocation theory and mechanics.

cond-mat.mtrl-sci↗

arXiv2024

Automating Dislocation Characterization in 3D Dark Field X-ray Microscopy

Mechanical properties in crystals are strongly correlated to the arrangement of 1D line defects, termed dislocations. Recently, Dark field X-ray Microscopy (DFXM) has emerged as a new tool to image and interpret dislocations within crystals using multidimensional scans. However, the methods required to reconstruct meaningful dislocation information from high-dimensional DFXM scans are still nascent and require significant manual oversight (i.e. \textit{supervision}). In this work, we present a new relatively unsupervised method that extracts dislocation-specific information (features) from a 3D dataset ($x$, $y$, $ϕ$) using Gram-Schmidt orthogonalization to represent the large dataset as an array of 3-component feature vectors for each position, corresponding to the weak-beam conditions and the strong-beam condition. This method offers key opportunities to significantly reduce dataset size while preserving only the crystallographic information that is important for data reconstruction.

cond-mat.mtrl-sci↗

arXiv2023

Correlating Chemical Reaction and Mass Transport in Hydrogen-based Direct Reduction of Iron Oxide

Steelmaking contributes 8% to the total CO2 emissions globally, primarily due to coal-based iron ore reduction. Clean hydrogen-based ironmaking has variable performance because the dominant gas-solid reduction mechanism is set by the defects and pores inside the mm-nm sized oxide particles that change significantly as the reaction progresses. While these governing dynamics are essential to establish continuous flow of iron and its ores through reactors, the direct link between agglomeration and chemistry is still contested due to missing measurements. In this work, we directly measure the connection between chemistry and agglomeration in the smallest iron oxides relevant to magnetite ores. Using synthesized spherical 10-nm magnetite particles reacting in H2, we resolve the formation and consumption of wüstite (FeO) - the step most commonly attributed to agglomeration. Using X-ray scattering and microscopy, we resolve crystallographic anisotropy in the rate of the initial reaction, which becomes isotropic as the material sinters. Complementing with imaging, we demonstrate how the particles self-assemble, subsequently react and sinter into ~100x oblong grains. Our insights into how morphologically uniform iron oxide particles react and agglomerate H2 reduction enable future size-dependent models to effectively describe the multiscale iron ore reduction.

cond-mat.mtrl-sci↗

arXiv2021

X-ray Free Electron Laser based Dark-Field X-ray Microscopy

Dark-field X-ray microscopy (DFXM) is a nondestructive full-field imaging technique providing three dimensional mapping of microstructure and local strain fields in deeply embedded crystalline elements. This is achieved by placing an objective lens in the diffracted beam, giving a magnified projection image. So far, the method has been applied with a time resolution of milliseconds to hours. In this work, we consider the feasibility of DFXM at the picosecond time scale using an X-ray free electron laser source and a pump-probe scheme. We combine thermomechanical strain wave simulations with geometrical optics and wavefront propagation optics to simulate DFXM images of phonon dynamics in a diamond single crystal. Using the specifications of the XCS instrument at the Linac Coherent Light Source (LCLS) as an example results in simulated DFXM images clearly showing the propagation of a strain wave.

cond-mat.mtrl-sci↗