arXiv subjects

Lerrel Pinto

Publications and source records attributed to Lerrel Pinto.

At least 19 recordsLinked to original sources

arXiv2026

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

cs.RO↗

arXiv2026

Hierarchical World Models with Implicit Dynamics

Planning with world models enables test-time adaptation for embodied agents, offering superior generalization over direct policy learning. However, long-horizon tasks remain hindered by cumulative errors and search complexity. Existing hierarchical methods often use rigid macro-actions or latent skills, leading to brittle representations and limited fine-grained control. We introduce ID-WM (Implicit Dynamics World Models), a hierarchical world model that decouples state-space reachability from local control. Our framework utilizes a high-level model to sample feasible transitions across the state manifold and a low-level world model as an inverse dynamics solver to ground these transitions into precise actions. This allows the planner to identify reachable subgoals without being constrained by low-level execution details. By prioritizing local physical feasibility over global behavioral patterns, ID-WM synthesizes novel long-horizon plans from short segments, transcending the specific behavioral modes seen during training. We demonstrate its effectiveness across three navigation and manipulation suites, achieving a 38.5% improvement over state-of-the-art policy and diffusion-based planners. Crucially, by leveraging this hierarchical structure to mitigate compounding errors, our approach yields a 135% performance gain over single-level world model MPC, particularly in complex, unseen configurations for long-horizon tasks. Videos can be viewed at https://id-wm.github.io

cs.RO↗

arXiv2026

Steertuning Policies from a Few Human Videos

Current recipes for robot learning require massive amounts of robot demonstrations to obtain robust and adaptive policies. In this work, we introduce Steertuning, a system that enables robots to learn new tasks in new environments from 5 human demonstrations in under 5 Steertuning consists of two parts. (1) We pretrain a 400M-parameter diffusion policy on our egocentric human dataset, which consists of 100 hours of densely annotated random interactions. This pretraining makes Steertuning robust to background differences and enables spatial and object generalization when deployed on new tasks. (2) Given 5 demonstrations of a new task, we finetune our model for only 2 minutes (2000 training updates) and steer the policy's actions during reverse sampling using the demonstration whose observation is closest to that of the deployment environment. Together with a carefully designed data processing pipeline for embodiment transfer, this enables Steertuning to achieve a 71% success rate across 12 tasks in 12 new environments, ranging from lab settings to kitchens in new homes. The entire process, from data collection for a new task to robot policy deployment, takes less than 5 minutes. Our full dataset, model weights, codebase, and robot videos will be made available at our website: https://steertuning.github.io.

cs.RO↗

arXiv2026

WetRobo: A Reproducible Robot Kit for Coding Agents in Biological Laboratories

Automating biological research requires general-purpose, reproducible robot systems that allow individual wet-lab researchers to delegate robot tasks without performing teleoperation or neural-network training. Vision-language-action policies have been proposed for general-purpose arms, but can lose performance when their operating environment changes. We therefore built WetRobo, a robot kit that can readily transfer between laboratories. It consists of one robot arm, laboratory equipment (an incubator, a reagent bottle with a cap, and a Petri dish), the existing code that moves the arm, teleoperation demonstrations of each task that we recorded, and a general AGENTS.md skill file. A biological experimentalist provides natural-language tasks without collecting local teleoperation training data or training a neural network. The coding agent observes the local laboratory and writes and executes programs, using external tools as needed for adaptation. We demonstrate use of WetRobo with OpenAI Codex (gpt-5.6-sol) on three successful tasks: lifting a Petri dish lid, removing a bottle cap, and opening the incubator door, all in real-world laboratories. The coding agent achieved the cap task in both laboratories, Lab X and Lab Y, whereas a VLA fine-tuned on Lab X demonstrations succeeded there but failed to transfer to Lab Y. These results point to a practical route for laboratory robotics: instead of training a policy for each laboratory, distribute a kit and let a coding agent adapt it in each laboratory. Code, demonstrations, and the evolved programs are available at https://github.com/tsudalab/WetRobo.

cs.AI↗

arXiv2026

Patch Policy: Efficient Embodied Control via Dense Visual Representations

Pretrained dense visual features from Vision Transformers (ViTs) are powerful yet have been underutilized in robot learning. Modern robot policies either compress each observation into a single global token, or rely on visual backbones trained from scratch, sacrificing both fine-grained spatial detail and the benefits of large-scale visual pre-training. While there exist policies that do operate on dense patch features like large vision-language-action models (VLAs), they tend to be heavy and slow, inheriting the full cost of a billion-parameter vision-language model (VLM) backbone. We close this gap with Patch Policy, a minimal architectural extension that enables transformer-based policies to consume dense pre-trained patch tokens directly without the computational overhead of a full VLM. At its core is a block-causal attention mask that preserves the temporal causality of standard policies while letting the model attend over many patch tokens per observation, alongside other state information. Patch Policy is lightweight, fast, and highly effective. Across four simulated and three real-world environment suites, our method achieves a 40% relative improvement over policies using state-of-the-art global-pooled representations. Furthermore, it surpasses fine-tuned OpenVLA-OFT by 18% while using roughly 0.7% of the parameters. We believe Patch Policy provides a pipeline for the robotics community to readily leverage continuing progress in visual representation learning, without sacrificing the training efficiency or inference speed required for high-frequency, reactive control. Videos can be viewed at https://patch-policy.github.io

cs.RO↗

arXiv2026

Human Universal Grasping

Humans can grasp objects effortlessly, whereas multi-fingered robots are far from this level of generality. We argue that the most natural source of robot grasping data is from humans, who pick up thousands of objects every day. We present HUG, a flow-matching model that generates diverse human grasps for any user-specified object in a single RGB-D image captured from a stereo camera. Using smart glasses, we first collect 1M-HUGs, an egocentric dataset of human grasps spanning 1M frames (27.8 hrs) and 6,707 object instances across 41 buildings. Next, to model the distribution of natural human grasps, our novel flow-matching model fuses RGB and depth observations to output a grasp parameterized by wrist translation, wrist rotation, and MANO hand pose. Predicted grasps can be retargeted to various robot hands, enabling zero-shot grasping in everyday scenes. To standardize evaluation, we build a new simulated benchmark, HUG-Bench, of 90 unseen objects from five geometric categories and various sizes, with metric-scale 3D meshes. We evaluate HUG in the real world on the 30-object test set of HUG-Bench across multiple stereo cameras, robot embodiments, and household environments. HUG outperforms the state-of-the-art grasping baselines by +23% and +34% on our challenging object set. Code, data, benchmark, checkpoints, and an interactive demo are released on our website: https://grasping.io/

cs.RO↗

arXiv2026

Ruka-v2: Tendon Driven Open-Source Dexterous Hand with Wrist and Abduction for Robot Learning

Lack of accessible and dexterous robot hardware has been a significant bottleneck to achieving human-level dexterity in robots. Last year, we released Ruka, a fully open-sourced, tendon-driven humanoid hand with 11 degrees of freedom - 2 per finger and 3 at the thumb - buildable for under $1,300. It was one of the first fully open-sourced humanoid hands, and introduced a novel data-driven approach to finger control that captures tendon dynamics within the control system. Despite these contributions, Ruka lacked two degrees of freedom essential for closely imitating human behavior: wrist mobility and finger adduction/abduction. In this paper, we introduce Ruka-v2: a fully open-sourced, tendon-driven humanoid hand featuring a decoupled 2-DOF parallel wrist and abduction/adduction at the fingers. The parallel wrist adds smooth, independent flexion/extension and radial/ulnar deviation, enabling manipulation in confined environments such as cabinets. Abduction enables motions such as grasping thin objects, in-hand rotation, and calligraphy. We present the design of Ruka-v2 and evaluate it against Ruka through user studies on teleoperated tasks, finding a 51.3% reduction in completion time and a 21.2% increase in success rate. We further demonstrate its full range of applications for robot learning: bimanual and single-arm teleoperation across 13 dexterous tasks, and autonomous policy learning on 3 tasks. All 3D print files, assembly instructions, controller software, and videos are available at https://ruka-hand-v2.github.io/ .

cs.RO↗

arXiv2026

Point Bridge: 3D Representations for Cross Domain Policy Learning

Robot foundation models are beginning to deliver on the promise of generalist robotic agents, yet progress remains constrained by the scarcity of large-scale real-world manipulation datasets. Simulation and synthetic data generation offer a scalable alternative, but their usefulness is limited by the visual domain gap between simulation and reality. In this work, we present Point Bridge, a framework that leverages unified, domain-agnostic point-based representations to unlock synthetic datasets for zero-shot sim-to-real policy transfer, without explicit visual or object-level alignment. Point Bridge combines automated point-based representation extraction via Vision-Language Models (VLMs), transformer-based policy learning, and efficient inference-time pipelines to train capable real-world manipulation agents using only synthetic data. With additional co-training on small sets of real demonstrations, Point Bridge further improves performance, substantially outperforming prior vision-based sim-and-real co-training methods. It achieves up to 44% gains in zero-shot sim-to-real transfer and up to 66% with limited real data across both single-task and multitask settings. Videos of the robot are best viewed at: https://pointbridge3d.github.io/

cs.RO↗

arXiv2026

Quality over Quantity: Demonstration Curation via Influence Functions for Data-Centric Robot Learning

Learning from demonstrations has emerged as a promising paradigm for end-to-end robot control, particularly when scaled to diverse and large datasets. However, the quality of demonstration data, often collected through human teleoperation, remains a critical bottleneck for effective data-driven robot learning. Human errors, operational constraints, and teleoperator variability introduce noise and suboptimal behaviors, making data curation essential yet largely manual and heuristic-driven. In this work, we propose Quality over Quantity (QoQ), a grounded and systematic approach to identifying high-quality data by defining data quality as the contribution of each training sample to reducing loss on validation demonstrations. To efficiently estimate this contribution, we leverage influence functions, which quantify the impact of individual training samples on model performance. We further introduce two key techniques to adapt influence functions for robot demonstrations: (i) using maximum influence across validation samples to capture the most relevant state-action pairs, and (ii) aggregating influence scores of state-action pairs within the same trajectory to reduce noise and improve data coverage. Experiments in both simulated and real-world settings show that QoQ consistently improves policy performances over prior data selection methods.

cs.RO↗

arXiv2026

Hierarchical Latent Action Model

Latent Action Models (LAMs) enable learning from actionless data for applications ranging from robotic control to interactive world models. However, existing LAMs typically focus on short-horizon frame transitions and capture low-level motion while overlooking longer-term temporal structure. In contrast, actionless videos often contain temporally extended and high-level skills. We present HiLAM, a hierarchical latent action model that discovers latent skills by modeling long-term temporal information. To capture these dependencies across long horizons, we utilize a pretrained LAM as a low-level extractor. This architecture aggregates latent action sequences, which contain the underlying dynamic patterns of the video, into high-level latent skills. Our experiments demonstrate that HiLAM improves over the baseline and exhibits robust dynamic skill discovery.

cs.RO↗

arXiv2026

YOR: Your Own Mobile Manipulator for Generalizable Robotics

Recent advances in robot learning have generated significant interest in capable platforms that may eventually approach human-level competence. This interest, combined with the commoditization of actuators, has propelled growth in low-cost robotic platforms. However, the optimal form factor for mobile manipulation, especially on a budget, remains an open question. We introduce YOR, an open-source, low-cost mobile manipulator that integrates an omnidirectional base, a telescopic vertical lift, and two arms with grippers to achieve whole-body mobility and manipulation. Our design emphasizes modularity, ease of assembly using off-the-shelf components, and affordability, with a bill-of-materials cost under 10,000 USD. We demonstrate YOR's capability by completing tasks that require coordinated whole-body control, bimanual manipulation, and autonomous navigation. Overall, YOR offers competitive functionality for mobile manipulation research at a fraction of the cost of existing platforms. Project website: https://www.yourownrobot.ai/

cs.RO↗

arXiv2026

Contact-Anchored Policies: Contact Conditioning Creates Strong Robot Utility Models

The prevalent paradigm in robot learning attempts to generalize across environments, embodiments, and tasks with language prompts at runtime. A fundamental tension limits this approach: language is often too abstract to guide the concrete physical understanding required for robust manipulation. In this work, we introduce Contact-Anchored Policies (CAP), which replace language conditioning with points of physical contact in space. Simultaneously, we structure CAP as a library of modular utility models rather than a monolithic generalist policy. This factorization allows us to implement a real-to-sim iteration cycle: we build EgoGym, a lightweight simulation benchmark, to rapidly identify failure modes and refine our models and datasets prior to real-world deployment. We show that by conditioning on contact and iterating via simulation, CAP generalizes to novel environments and embodiments out of the box on three fundamental manipulation skills while using only 23 hours of demonstration data, and outperforms large, state-of-the-art VLAs in zero-shot evaluations by 56%. All model checkpoints, codebase, hardware, simulation, and datasets will be open-sourced. Project page: https://cap-policy.github.io/

cs.RO↗

arXiv2025

Dexterity from Smart Lenses: Multi-Fingered Robot Manipulation with In-the-Wild Human Demonstrations

Learning multi-fingered robot policies from humans performing daily tasks in natural environments has long been a grand goal in the robotics community. Achieving this would mark significant progress toward generalizable robot manipulation in human environments, as it would reduce the reliance on labor-intensive robot data collection. Despite substantial efforts, progress toward this goal has been bottle-necked by the embodiment gap between humans and robots, as well as by difficulties in extracting relevant contextual and motion cues that enable learning of autonomous policies from in-the-wild human videos. We claim that with simple yet sufficiently powerful hardware for obtaining human data and our proposed framework AINA, we are now one significant step closer to achieving this dream. AINA enables learning multi-fingered policies from data collected by anyone, anywhere, and in any environment using Aria Gen 2 glasses. These glasses are lightweight and portable, feature a high-resolution RGB camera, provide accurate on-board 3D head and hand poses, and offer a wide stereo view that can be leveraged for depth estimation of the scene. This setup enables the learning of 3D point-based policies for multi-fingered hands that are robust to background changes and can be deployed directly without requiring any robot data (including online corrections, reinforcement learning, or simulation). We compare our framework against prior human-to-robot policy learning approaches, ablate our design choices, and demonstrate results across nine everyday manipulation tasks. Robot rollouts are best viewed on our website: https://aina-robot.github.io.

cs.RO↗

arXiv2025

Touch begins where vision ends: Generalizable policies for contact-rich manipulation

Data-driven approaches struggle with precise manipulation; imitation learning requires many hard-to-obtain demonstrations, while reinforcement learning yields brittle, non-generalizable policies. We introduce VisuoTactile Local (ViTaL) policy learning, a framework that solves fine-grained manipulation tasks by decomposing them into two phases: a reaching phase, where a vision-language model (VLM) enables scene-level reasoning to localize the object of interest, and a local interaction phase, where a reusable, scene-agnostic ViTaL policy performs contact-rich manipulation using egocentric vision and tactile sensing. This approach is motivated by the observation that while scene context varies, the low-level interaction remains consistent across task instances. By training local policies once in a canonical setting, they can generalize via a localize-then-execute strategy. ViTaL achieves around 90% success on contact-rich tasks in unseen environments and is robust to distractors. ViTaL's effectiveness stems from three key insights: (1) foundation models for segmentation enable training robust visual encoders via behavior cloning; (2) these encoders improve the generalizability of policies learned using residual RL; and (3) tactile sensing significantly boosts performance in contact-rich tasks. Ablation studies validate each of these insights, and we demonstrate that ViTaL integrates well with high-level VLMs, enabling robust, reusable low-level skills. Results and videos are available at https://vitalprecise.github.io.

cs.RO↗

arXiv2025

eFlesh: Highly customizable Magnetic Touch Sensing using Cut-Cell Microstructures

If human experience is any guide, operating effectively in unstructured environments -- like homes and offices -- requires robots to sense the forces during physical interaction. Yet, the lack of a versatile, accessible, and easily customizable tactile sensor has led to fragmented, sensor-specific solutions in robotic manipulation -- and in many cases, to force-unaware, sensorless approaches. With eFlesh, we bridge this gap by introducing a magnetic tactile sensor that is low-cost, easy to fabricate, and highly customizable. Building an eFlesh sensor requires only four components: a hobbyist 3D printer, off-the-shelf magnets (<$5), a CAD model of the desired shape, and a magnetometer circuit board. The sensor is constructed from tiled, parameterized microstructures, which allow for tuning the sensor's geometry and its mechanical response. We provide an open-source design tool that converts convex OBJ/STL files into 3D-printable STLs for fabrication. This modular design framework enables users to create application-specific sensors, and to adjust sensitivity depending on the task. Our sensor characterization experiments demonstrate the capabilities of eFlesh: contact localization RMSE of 0.5 mm, and force prediction RMSE of 0.27 N for normal force and 0.12 N for shear force. We also present a learned slip detection model that generalizes to unseen objects with 95% accuracy, and visuotactile control policies that improve manipulation performance by 40% over vision-only baselines -- achieving 91% average success rate for four precise tasks that require sub-mm accuracy for successful completion. All design files, code and the CAD-to-eFlesh STL conversion tool are open-sourced and available on https://e-flesh.com.

cs.RO↗

arXiv2025

EgoZero: Robot Learning from Smart Glasses

Despite recent progress in general purpose robotics, robot policies still lag far behind basic human capabilities in the real world. Humans interact constantly with the physical world, yet this rich data resource remains largely untapped in robot learning. We propose EgoZero, a minimal system that learns robust manipulation policies from human demonstrations captured with Project Aria smart glasses, $\textbf{and zero robot data}$. EgoZero enables: (1) extraction of complete, robot-executable actions from in-the-wild, egocentric, human demonstrations, (2) compression of human visual observations into morphology-agnostic state representations, and (3) closed-loop policy learning that generalizes morphologically, spatially, and semantically. We deploy EgoZero policies on a gripper Franka Panda robot and demonstrate zero-shot transfer with 70% success rate over 7 manipulation tasks and only 20 minutes of data collection per task. Our results suggest that in-the-wild human data can serve as a scalable foundation for real-world robot learning - paving the way toward a future of abundant, diverse, and naturalistic training data for robots. Code and videos are available at https://egozero-robot.github.io.

cs.RO↗

arXiv2025

Feel the Force: Contact-Driven Learning from Humans

Controlling fine-grained forces during manipulation remains a core challenge in robotics. While robot policies learned from robot-collected data or simulation show promise, they struggle to generalize across the diverse range of real-world interactions. Learning directly from humans offers a scalable solution, enabling demonstrators to perform skills in their natural embodiment and in everyday environments. However, visual demonstrations alone lack the information needed to infer precise contact forces. We present FeelTheForce (FTF): a robot learning system that models human tactile behavior to learn force-sensitive manipulation. Using a tactile glove to measure contact forces and a vision-based model to estimate hand pose, we train a closed-loop policy that continuously predicts the forces needed for manipulation. This policy is re-targeted to a Franka Panda robot with tactile gripper sensors using shared visual and action representations. At execution, a PD controller modulates gripper closure to track predicted forces-enabling precise, force-aware control. Our approach grounds robust low-level force control in scalable human supervision, achieving a 77% success rate across 5 force-sensitive manipulation tasks. Code and videos are available at https://feel-the-force-ftf.github.io.

cs.RO↗

arXiv2025

DynaMem: Online Dynamic Spatio-Semantic Memory for Open World Mobile Manipulation

Significant progress has been made in open-vocabulary mobile manipulation, where the goal is for a robot to perform tasks in any environment given a natural language description. However, most current systems assume a static environment, which limits the system's applicability in real-world scenarios where environments frequently change due to human intervention or the robot's own actions. In this work, we present DynaMem, a new approach to open-world mobile manipulation that uses a dynamic spatio-semantic memory to represent a robot's environment. DynaMem constructs a 3D data structure to maintain a dynamic memory of point clouds, and answers open-vocabulary object localization queries using multimodal LLMs or open-vocabulary features generated by state-of-the-art vision-language models. Powered by DynaMem, our robots can explore novel environments, search for objects not found in memory, and continuously update the memory as objects move, appear, or disappear in the scene. We run extensive experiments on the Stretch SE3 robots in three real and nine offline scenes, and achieve an average pick-and-drop success rate of 70% on non-stationary objects, which is more than a 2x improvement over state-of-the-art static systems. Our code as well as our experiment and deployment videos are open sourced and can be found on our project website: https://dynamem.github.io/

cs.RO↗