arXiv subjects

Levente Vitos

Publications and source records attributed to Levente Vitos.

33 records · Page 2Linked to original sources

arXiv2018

Understanding the mechanical properties of reduced activation steels

Reduced activation ferritic/martensitic (RAFM) steels are structural materials with potential application in Generation-IV fission and fusion reactors. We use density-functional theory to scrutinize the micro-mechanical properties of the main alloy phases of three RAFM steels based on the body-centered cubic FeCrWVMn solid solution. We assess the lattice parameters and elastic properties of ferromagnetic $α$-Fe and Fe$_{91}$Cr$_{9}$, which are the main building blocks of the RAFM steels, and present a detailed analysis of the calculated alloying effects of V, Cr, Mn, and W on the mechanical properties of Fe$_{91}$Cr$_{9}$. The composition dependence of the elastic parameters is decomposed into electronic and volumetric contributions and studied for alloying levels that cover the typical intervals in RAFM steels. A linear superposition of the individual solute effects on the properties of Fe$_{91}$Cr$_{9}$ is shown to provide an excellent approximation for the \emph{ab initio} values obtained for the RAFM steels. The intrinsic ductility is evaluated through Rice's phenomenological theory using the surface and unstable stacking fault energies, and the predictions are contrasted with those obtained by empirical criteria. Alloying with V or W is found to enhance the ductility, whereas additional Cr or Mn turns the RAFM base alloys more brittle.

cond-mat.mtrl-sci↗

arXiv2016

Tensile strain-induced softening of iron at high temperature

In weakly ferromagnetic materials, already small changes in the atomic configuration triggered by temperature or chemistry can alter the magnetic interactions responsible for the non-random atomic-spin orientation. Different magnetic states, in turn, can give rise to substantially different macroscopic properties. A classical example is iron, which exhibits a great variety of properties as one gradually removes the magnetic long-range order by raising the temperature towards and beyond its Curie point of $T_{\text{C}}^{0}=1043$\,K. Using first-principles theory, here we demonstrate that uniaxial tensile strain can also destabilize the magnetic order in iron and eventually lead to a ferromagnetic to paramagnetic transition at temperatures far below $T_{\text{C}}^{0}$. In consequence, the intrinsic strength of the ideal single-crystal body-centered cubic iron dramatically weakens above a critical temperature of $\sim 500$\,K. The discovered strain-induced magneto-mechanical softening provides a plausible atomic-level mechanism behind the observed drop of the measured strength of Fe whiskers around $300-500$\,K. Alloying additions which have the capability to partially restore the magnetic order in the strained Fe lattice, push the critical temperature for the strength-softening scenario towards the magnetic transition temperature of the undeformed lattice. This can result in a surprisingly large alloying-driven strengthening effect at high temperature as illustrated here in the case of Fe-Co alloy.

cond-mat.mtrl-sci↗

arXiv2016

Alloying effect on the ideal tensile strength of ferromagnetic and paramagnetic bcc iron

Using \emph{ab initio} alloy theory formulated within the exact muffin-tin orbitals theory in combination with the coherent potential approximation, we investigate the ideal tensile strength (ITS) in the $[001]$ direction of bcc ferro-/ferrimagnetic (FFM) and paramagnetic (PM) Fe$_{1-x}M_{x}$ ($M=$ Al, V, Cr, Mn, Co, or Ni) random alloys. The ITS of ferromagnetic (FM) Fe is calculated to be $12.6$\,GPa, in agreement with available data, while the PM phase turns out to posses a significantly lower value of $0.7\,$GPa. Alloyed to the FM matrix, we predict that V, Cr, and Co increase the ITS of Fe, while Al and Ni decrease it. Manganese yields a weak non-monotonic alloying behavior. In comparison to FM Fe, the alloying effect of Al and Co to PM Fe is reversed and the relative magnitude of the ITS can be altered more strongly for any of the solutes. All considered binaries are intrinsically brittle and fail by cleavage of the $(001)$ planes under uniaxial tensile loading in both magnetic phases. We show that the previously established ITS model based on structural energy differences proves successful in the PM Fe-alloys but is of limited use in the case of the FFM Fe-based alloys. The different performance is attributed to the specific interplay between magnetism and volume change in response to uniaxial tension. We establish a strong correlation between the compositional effect on the ITS and the one on the shear elastic constant $C'$ for the PM alloys and briefly discuss the relation between hardenability and the ITS.

cond-mat.mtrl-sci↗

arXiv2015

Effect of interstitial-driven lattice expansion on the stacking fault energy in austenitic steels

Interstitials (carbon and nitrogen) are crucial alloying elements for optimizing the mechanical performance of the twinning-induced plasticity (TWIP) steels in terms of the stacking fault energy (SFE). First-principles calculations have been performed to study the effect of interstitial-induced lattice expansion on the SFE. Comparing the predictions with the SFEs measured for alloys containing C and N, our results suggest that the dominant effect of these interstitials on the SFE is due to the lattice expansion effect.

cond-mat.mtrl-sci↗

arXiv2015

First-Principles prediction of the deformation modes in austenitic Fe-Cr-Ni alloys

First-principles alloy theory is used to establish the $γ$-surface of Fe-Cr-Ni alloys as function of chemical composition and temperature. The theoretical stacking fault energy (SFE) versus chemistry and temperature trends agree well with experiments. Combining our results with the recent plasticity theory based on the $γ$-surface, the stacking fault formation is predicted to be the leading deformation mechanism for alloys with effective stacking fault energy below about 18 mJ m$^{-2}$. Alloys with SFE above this critical value show both twinning and full slip at room temperature and twinning remains a possible deformation mode even at elevated temperatures, in line with observations.

cond-mat.mtrl-sci↗

arXiv2015

Stacking fault energy of face-centered cubic metals: thermodynamic and ab initio approaches

The formation energy of the interface between face-centered cubic (fcc) and hexagonal close packed (hcp) structures is a key parameter in determining the stacking fault energy (SFE) of fcc metals and alloys using thermodynamic calculations. Often the contribution of the planar fault energy to the SFE has the same order of magnitude as the bulk part, and thus the lack of a precise information about it can become the limiting factor in thermodynamic predictions. Here, we differentiate between the actual interfacial energy for the coherent fcc(111)/hcp(0001) interface and the "pseudo-interfacial energy" that enters the thermodynamic expression for the SFE. Using first-principles calculations, we determine the coherent and pseudo- interfacial energies for six elemental metals (Al, Ni, Cu, Ag, Pt, and Au) and for three paramagnetic Fe-Cr-Ni alloys. Our results show that the two interfacial energies significantly differ from each other. We observe a strong chemistry dependence of both interfacial energies. The calculated pseudo-interfacial energies for the Fe-Cr-Ni steels agree well with the available literature data.

cond-mat.mtrl-sci↗

arXiv2015

Ab initio prediction of the mechanical properties of alloys: The case of Ni/Mn-doped ferromagnetic Fe

First-principles alloy theory, formulated within the exact muffin-tin orbitals method in combination with the coherent-potential approximation, is used to study the mechanical properties of ferromagnetic body-centered cubic (bcc) Fe$_{1-x}$M$_x$ alloys (M=Mn or Ni, $0\le x \le 0.1$). We consider several physical parameters accessible from \emph{ab initio} calculations and their combinations in various phenomenological models to compare the effect of Mn and Ni on the properties of Fe. Alloying is found to slightly alter the lattice parameters and produce noticeable influence on elastic moduli. Both Mn and Ni decrease the surface energy and the unstable stacking fault energy associated with the $\{110\}$ surface facet and the $\{110\}\langle111\rangle$ slip system, respectively. Nickel is found to produce larger effect on the planar fault energies than Mn. The semi-empirical ductility criteria by Rice and Pugh consistently predict that Ni enhances the ductility of Fe but give contradictory results in the case of Mn doping. The origin of the discrepancy between the two criteria is discussed and an alternative measure of the ductile-brittle behavior based on the theoretical cleavage strength and single-crystal shear modulus $G\{110\}\langle111\rangle$ is proposed.

cond-mat.mtrl-sci↗

arXiv2015

Metastable cubic and tetragonal phases of transition metals predicted by density-functional theory

By means of density-functional calculations, we systematically investigated 24 transition metals for possible metastable phases in body-centered tetragonal structure (bct), including face-centered cubic (fcc) and body-centered cubic (bcc) geometries. A total of 36 structures not coinciding with equilibrium phases were found to minimize the total energy for the bct degrees of freedom. Among these, the fcc structures of Sc, Ti, Co, Y, Zr, Tc, Ru, Hf, Re, and Os, and bct Zr with $c/a=0.82$ were found to be metastable according to their computed phonon spectra. Eight of these predicted phases are not known from the respective pressure-temperature phase diagrams. Possible ways to stabilize the predicted metastable phases are illustrated.

cond-mat.mtrl-sci↗

arXiv2014

Anomalous ideal tensile strength of ferromagnetic Fe and Fe-rich alloys

Within the same failure mode, iron has the lowest ideal tensile strength among the transition metals crystallizing in the body-centered cubic structure. Here, we demonstrate that this anomalously low strength of Fe originates partly from magnetism and is reflected in unexpected alloying effects in dilute Fe(\emph{M}) (\emph{M} = Al, V, Cr, Mn, Co, Ni) binaries. We employ the structural energy difference and the magnetic pressure to disentangle the magnetic effect on the ideal tensile strength from the chemical effect. We find that the investigated solutes strongly alter the magnetic response of the Fe host from the weak towards a stronger ferromagnetic behavior, which is explained based on single-particle band energies.

cond-mat.mtrl-sci↗

arXiv2013

Ideal strength of random alloys from first-principles theory

The all-electron exact muffin-tin orbitals method in combination with the coherent-potential appproximation has been employed to investigate the ideal tensile strengths of elemental V, Mo solids and V- and Mo-based random solid solutions. The present ideal tensile strengths, calculated assuming isotropic Poisson contraction, are 16.1, 26.7 and 37.6 GPa for bcc V in the [001], [111] and [110] directions, respectively, and 26.7 GPa for bcc Mo in the [001] direction, which are all in good agreement with the available theoretical data. When a few percent Tc is introduced in Mo, it is found that the ideal strength decreases in the [001] direction. For the V-based alloys, Cr increases and Ti decreases the ideal tensile strength in all principal directions. Adding the same concentration of Cr and Ti to V leads to ternary alloys with similar ideal strength values as that of pure V. The alloying effects on the ideal strength is explained using the electronic band structure.

cond-mat.dis-nn↗

arXiv2013

Surface parameters of ferritic iron-rich Fe-Cr alloy

Using first-principles density functional theory in the implementation of the exact muffin-tin orbitals method and the coherent potential approximation, we studied the surface energy and the surface stress of the thermodynamically most stable surface facet (100) of the homogeneous disordered body-centred cubic iron-chromium system in the concentration interval up to 20 at.% Cr. For the low-index surface facets of Fe and Cr, the surface energy of Cr is slightly larger than the one of Fe, while the surface stress of Cr is considerably smaller than the one of Fe. We find that Cr addition to Fe generally increases the surface energy of the Fe-Cr alloy, however, an increase of the bulk amount of Cr also increases the surface stress. As a result of this unexpected trend, the (100) surface of Fe-Cr becomes more stable against reconstruction with increasing Cr concentration. We show that the observed trends are of magnetic origin. In addition to the homogeneous alloy case, we also investigated the impact of surface segregation on both surface parameters.

cond-mat.mtrl-sci↗

arXiv2011

Initial oxidation of Fe-Al and Fe-Cr-Al alloys: Cr as an alumina booster

The boosting effect of Cr on the growth of the protective alumina scale on Fe-Al alloys is investigated by x-ray photoelectron spectroscopy. Using low oxygen pressure the surface chemistry of the alloys is monitored starting from the first moments of oxidation. Chromium effect on the Fe-Al surface-bulk exchange is clearly detected by analyzing the measured surface concentrations within the atomic concentration models. Previous ab initio calculations agree well with the present experiments.

cond-mat.mtrl-sci↗

arXiv2011

Strongly enhanced magnetic moments in ferromagnetic FeMnP$_{0.50}$Si$_{0.50}$

The compound FeMnP$_{0.50}$Si$_{0.50}$ has been studied by magnetic measurements, Mössbauer spectroscopy and electronic structure and total energy calculations. An unexpected high magnetic hyperfine field for Fe atoms located at the tetrahedral Me(1) site in the Fe$_2$P structure is found. The saturation moment derived from magnetic measurements corresponds to 4.4 $μ_B$/f.u. at low temperatures, a value substantially higher than previously reported, but in accord with the results from our electron structure calculations. This high saturation moment, a first order nature of the ferromagnetic transition and a tunable transition temperature make the Fe$_{2-x}$Mn$_{x}$P$_{1-y}$Si$y$ system promising for magnetocaloric applications.

cond-mat.mtrl-sci↗

arXiv2009

A new material for hydrogen storage, ScAl0.8Mg0.2

A novel aluminium rich alloy for hydrogen storage has been discovered, ScAl0.8Mg0.2, which has superior properties regarding hydrogen storage capacity, kinetics and stability towards air oxidation in comparison to hydrogen absorption in state-of-the-art intermetallic compounds. Detailed analysis of the hydrogen absorption in ScAl0.8Mg0.2 has been performed using in situ synchrotron radiation powder X-ray diffraction, neutron powder diffraction and quantum mechanical calculations. The results from calculations and experiments are in good agreement with each other.

cond-mat.mtrl-sci↗

arXiv2009

Order--disorder induced magnetic structures of FeMnP$_{0.75}$Si$_{0.25}$

We report on the synthesis and structural characterization of the magnetocaloric FeMnP$_{0.75}$Si$_{0.25}$ compound. Two types of samples (as quenched and annealed) were synthesized and characterized structurally and magnetically. We have found that minute changes in the degree of crystallographic order causes a large change in the magnetic properties. The annealed sample, with higher degree of order is antiferromagnetic with a zero net moment. The as-quenched sample has a net moment of 1.26 $μ_B$/f.u. and ferrimagnetic-like behavior. Theoretical calculations give rather large values for the Fe and Mn magnetic moments, both when occupied on the tetrahedral and pyramidal lattice site. The largest being the Mn moment for the pyramidal site reaches values as high as 2.8 $μ_B$/atom.

cond-mat.mtrl-sci↗