arXiv subjects

Li Du

Publications and source records attributed to Li Du.

At least 37 records · Page 2Linked to original sources

arXiv2026

A Scheduling Framework for Efficient MoE Inference on Edge GPU-NDP Systems

Mixture-of-Experts (MoE) models facilitate edge deployment by decoupling model capacity from active computation, yet their large memory footprint drives the need for GPU systems with near-data processing (NDP) capabilities that offload experts to dedicated processing units. However, deploying MoE models on such edge-based GPU-NDP systems faces three critical challenges: 1) severe load imbalance across NDP units due to non-uniform expert selection and expert parallelism, 2) insufficient GPU utilization during expert computation within NDP units, and 3) extensive data pre-profiling necessitated by unpredictable expert activation patterns for pre-fetching. To address these challenges, this paper proposes an efficient inference framework featuring three key optimizations. First, the underexplored tensor parallelism in MoE inference is exploited to partition and compute large expert parameters across multiple NDP units simultaneously towards edge low-batch scenarios. Second, a load-balancing-aware scheduling algorithm distributes expert computations across NDP units and GPU to maximize resource utilization. Third, a dataset-free pre-fetching strategy proactively loads frequently accessed experts to minimize activation delays. Experimental results show that our framework enables GPU-NDP systems to achieve 2.41x on average and up to 2.56x speedup in end-to-end latency compared to state-of-the-art approaches, significantly enhancing MoE inference efficiency in resource-constrained environments.

cs.DC↗

arXiv2026

Encyclo-K: Evaluating LLMs with Dynamically Composed Knowledge Statements

Benchmarks play a crucial role in tracking the rapid advancement of large language models (LLMs) and identifying their capability boundaries. However, existing benchmarks predominantly curate questions at the question level, suffering from three fundamental limitations: vulnerability to data contamination, restriction to single-knowledge-point assessment, and reliance on costly domain expert annotation. We propose Encyclo-K, a statement-based benchmark that rethinks benchmark construction from the ground up. Our key insight is that knowledge statements, not questions, can serve as the unit of curation, and questions can then be constructed from them. We extract standalone knowledge statements from authoritative textbooks and dynamically compose them into evaluation questions through random sampling at test time. This design directly addresses all three limitations: the combinatorial space is too vast to memorize, and model rankings remain stable across dynamically generated question sets, enabling reliable periodic dataset refresh; each question aggregates 8-10 statements for comprehensive multi-knowledge assessment; annotators only verify formatting compliance without requiring domain expertise, substantially reducing annotation costs. Experiments on over 50 LLMs demonstrate that Encyclo-K poses substantial challenges with strong discriminative power. Even the top-performing OpenAI-GPT-5.1 achieves only 62.07% accuracy, and model performance displays a clear gradient distribution--reasoning models span from 16.04% to 62.07%, while chat models range from 9.71% to 50.40%. These results validate the challenges introduced by dynamic evaluation and multi-statement comprehensive understanding. These findings establish Encyclo-K as a scalable framework for dynamic evaluation of LLMs' comprehensive understanding over multiple fine-grained disciplinary knowledge statements.

cs.CL↗

arXiv2025

Image2Net: Datasets, Benchmark and Hybrid Framework to Convert Analog Circuit Diagrams into Netlists

Large Language Model (LLM) exhibits great potential in designing of analog integrated circuits (IC) because of its excellence in abstraction and generalization for knowledge. However, further development of LLM-based analog ICs heavily relies on textual description of analog ICs, while existing analog ICs are mostly illustrated in image-based circuit diagrams rather than text-based netlists. Converting circuit diagrams to netlists help LLMs to enrich the knowledge of analog IC. Nevertheless, previously proposed conversion frameworks face challenges in further application because of limited support of image styles and circuit elements. Up to now, it still remains a challenging task to effectively convert complex circuit diagrams into netlists. To this end, this paper constructs and opensources a new dataset with rich styles of circuit diagrams as well as balanced distribution of simple and complex analog ICs. And a hybrid framework, named Image2Net, is proposed for practical conversion from circuit diagrams to netlists. The netlist edit distance (NED) is also introduced to precisely assess the difference between the converted netlists and ground truth. Based on our benchmark, Image2Net achieves 80.77% successful rate, which is 34.62%-45.19% higher than previous works. Specifically, the proposed work shows 0.116 averaged NED, which is 62.1%-69.6% lower than state-of-the-arts. Our datasets and benchmark are available at https://github.com/LAD021/ci2n_datasets.

cs.AR↗

arXiv2025

Tool Zero: Training Tool-Augmented LLMs via Pure RL from Scratch

Training tool-augmented LLMs has emerged as a promising approach to enhancing language models' capabilities for complex tasks. The current supervised fine-tuning paradigm relies on constructing extensive domain-specific datasets to train models. However, this approach often struggles to generalize effectively to unfamiliar or intricate tool-use scenarios. Recently, reinforcement learning (RL) paradigm can endow LLMs with superior reasoning and generalization abilities. In this work, we address a key question: Can the pure RL be used to effectively elicit a model's intrinsic reasoning capabilities and enhance the tool-agnostic generalization? We propose a dynamic generalization-guided reward design for rule-based RL, which progressively shifts rewards from exploratory to exploitative tool-use patterns. Based on this design, we introduce the Tool-Zero series models. These models are trained to enable LLMs to autonomously utilize general tools by directly scaling up RL from Zero models (i.e., base models without post-training). Experimental results demonstrate that our models achieve over 7% performance improvement compared to both SFT and RL-with-SFT models under the same experimental settings. These gains are consistently replicated across cross-dataset and intra-dataset evaluations, validating the effectiveness and robustness of our methods.

cs.LG↗

arXiv2025

Accelerate Scaling of LLM Finetuning via Quantifying the Coverage and Depth of Instruction Set

Scaling the amount of data used for supervied fine-tuning(SFT) does not guarantee the proportional gains in model performance, highlighting a critical need to understand what makes training samples effective. This work identifies two fundamental dataset properties that govern SFT scalability: \textbf{semantic coverage}, or the breadth of task domains, and \textbf{information depth}, or the richness of individual examples. We demonstrate that simple proxies for these properties explain the majority of validation loss variance in our experiments. In this work, we further propose the \textbf{Information Landscape Approximation (ILA)}, a model-agnostic data selection framework that jointly optimizes for these two factors. ILA constructs compact subsets that approximate the informational value of large datasets. Empirical results show that models tuned on ILA-selected data achieve faster and more sustained performance improvements across diverse tasks and model sizes compared to existing methods, a phenomenon we term \textbf{accelerated scaling}.

cs.AI↗

arXiv2025

RepCaM++: Exploring Transparent Visual Prompt With Inference-Time Re-Parameterization for Neural Video Delivery

Recently, content-aware methods have been employed to reduce bandwidth and enhance the quality of Internet video delivery. These methods involve training distinct content-aware super-resolution (SR) models for each video chunk on the server, subsequently streaming the low-resolution (LR) video chunks with the SR models to the client. Prior research has incorporated additional partial parameters to customize the models for individual video chunks. However, this leads to parameter accumulation and can fail to adapt appropriately as video lengths increase, resulting in increased delivery costs and reduced performance. In this paper, we introduce RepCaM++, an innovative framework based on a novel Re-parameterization Content-aware Modulation (RepCaM) module that uniformly modulates video chunks. The RepCaM framework integrates extra parallel-cascade parameters during training to accommodate multiple chunks, subsequently eliminating these additional parameters through re-parameterization during inference. Furthermore, to enhance RepCaM's performance, we propose the Transparent Visual Prompt (TVP), which includes a minimal set of zero-initialized image-level parameters (e.g., less than 0.1%) to capture fine details within video chunks. We conduct extensive experiments on the VSD4K dataset, encompassing six different video scenes, and achieve state-of-the-art results in video restoration quality and delivery bandwidth compression.

cs.NI↗

arXiv2025

BEVUDA++: Geometric-aware Unsupervised Domain Adaptation for Multi-View 3D Object Detection

Vision-centric Bird's Eye View (BEV) perception holds considerable promise for autonomous driving. Recent studies have prioritized efficiency or accuracy enhancements, yet the issue of domain shift has been overlooked, leading to substantial performance degradation upon transfer. We identify major domain gaps in real-world cross-domain scenarios and initiate the first effort to address the Domain Adaptation (DA) challenge in multi-view 3D object detection for BEV perception. Given the complexity of BEV perception approaches with their multiple components, domain shift accumulation across multi-geometric spaces (e.g., 2D, 3D Voxel, BEV) poses a significant challenge for BEV domain adaptation. In this paper, we introduce an innovative geometric-aware teacher-student framework, BEVUDA++, to diminish this issue, comprising a Reliable Depth Teacher (RDT) and a Geometric Consistent Student (GCS) model. Specifically, RDT effectively blends target LiDAR with dependable depth predictions to generate depth-aware information based on uncertainty estimation, enhancing the extraction of Voxel and BEV features that are essential for understanding the target domain. To collaboratively reduce the domain shift, GCS maps features from multiple spaces into a unified geometric embedding space, thereby narrowing the gap in data distribution between the two domains. Additionally, we introduce a novel Uncertainty-guided Exponential Moving Average (UEMA) to further reduce error accumulation due to domain shifts informed by previously obtained uncertainty guidance. To demonstrate the superiority of our proposed method, we execute comprehensive experiments in four cross-domain scenarios, securing state-of-the-art performance in BEV 3D object detection tasks, e.g., 12.9\% NDS and 9.5\% mAP enhancement on Day-Night adaptation.

cs.CV↗

arXiv2025

SQAP-VLA: A Synergistic Quantization-Aware Pruning Framework for High-Performance Vision-Language-Action Models

Vision-Language-Action (VLA) models exhibit unprecedented capabilities for embodied intelligence. However, their extensive computational and memory costs hinder their practical deployment. Existing VLA compression and acceleration approaches conduct quantization or token pruning in an ad-hoc manner but fail to enable both for a holistic efficiency improvement due to an observed incompatibility. This work introduces SQAP-VLA, the first structured, training-free VLA inference acceleration framework that simultaneously enables state-of-the-art quantization and token pruning. We overcome the incompatibility by co-designing the quantization and token pruning pipeline, where we propose new quantization-aware token pruning criteria that work on an aggressively quantized model while improving the quantizer design to enhance pruning effectiveness. When applied to standard VLA models, SQAP-VLA yields significant gains in computational efficiency and inference speed while successfully preserving core model performance, achieving a $\times$1.93 speedup and up to a 4.5\% average success rate enhancement compared to the original model.

cs.CV↗

arXiv2025

BASE-Q: Bias and Asymmetric Scaling Enhanced Rotational Quantization for Large Language Models

Rotations have become essential to state-of-the-art quantization pipelines for large language models (LLMs) by effectively smoothing outliers in weights and activations. However, further optimizing the rotation parameters offers only limited performance gains and introduces significant training overhead: due to rotation parameter sharing, full-model must be loaded simultaneously to enable backpropagation, resulting in substantial memory consumption and limited practical utility. In this work, we identify two fundamental limitations of current rotational quantization methods: (i) rotation fails to align channel means, resulting in wider quantization bounds and increased rounding errors; and (ii) rotation makes the activation distribution more Gaussian-like, increasing energy loss caused by clipping errors. To address these issues, we introduce \textbf{BASE-Q}, a simple yet powerful approach that combines bias correction and asymmetric scaling to effectively reduce rounding and clipping errors. Furthermore, BASE-Q enables blockwise optimization, eliminating the need for memory-intensive full-model backpropagation. Extensive experiments on various LLMs and benchmarks demonstrate the effectiveness of BASE-Q, narrowing the accuracy gap to full-precision models by 50.5\%, 42.9\%, and 29.2\% compared to QuaRot, SpinQuant, and OSTQuant, respectively. The code will be released soon.

cs.LG↗

arXiv2025

Fast Controlled Generation from Language Models with Adaptive Weighted Rejection Sampling

The dominant approach to generating from language models subject to some constraint is locally constrained decoding (LCD), incrementally sampling tokens at each time step such that the constraint is never violated. Typically, this is achieved through token masking: looping over the vocabulary and excluding non-conforming tokens. There are two important problems with this approach. (i) Evaluating the constraint on every token can be prohibitively expensive -- LM vocabularies often exceed $100,000$ tokens. (ii) LCD can distort the global distribution over strings, sampling tokens based only on local information, even if they lead down dead-end paths. This work introduces a new algorithm that addresses both these problems. First, to avoid evaluating a constraint on the full vocabulary at each step of generation, we propose an adaptive rejection sampling algorithm that typically requires orders of magnitude fewer constraint evaluations. Second, we show how this algorithm can be extended to produce low-variance, unbiased estimates of importance weights at a very small additional cost -- estimates that can be soundly used within previously proposed sequential Monte Carlo algorithms to correct for the myopic behavior of local constraint enforcement. Through extensive empirical evaluation in text-to-SQL, molecular synthesis, goal inference, pattern matching, and JSON domains, we show that our approach is superior to state-of-the-art baselines, supporting a broader class of constraints and improving both runtime and performance. Additional theoretical and empirical analyses show that our method's runtime efficiency is driven by its dynamic use of computation, scaling with the divergence between the unconstrained and constrained LM, and as a consequence, runtime improvements are greater for better models.

cs.CL↗

arXiv2025

AutoTIR: Autonomous Tools Integrated Reasoning via Reinforcement Learning

Large Language Models (LLMs), when enhanced through reasoning-oriented post-training, evolve into powerful Large Reasoning Models (LRMs). Tool-Integrated Reasoning (TIR) further extends their capabilities by incorporating external tools, but existing methods often rely on rigid, predefined tool-use patterns that risk degrading core language competence. Inspired by the human ability to adaptively select tools, we introduce AutoTIR, a reinforcement learning framework that enables LLMs to autonomously decide whether and which tool to invoke during the reasoning process, rather than following static tool-use strategies. AutoTIR leverages a hybrid reward mechanism that jointly optimizes for task-specific answer correctness, structured output adherence, and penalization of incorrect tool usage, thereby encouraging both precise reasoning and efficient tool integration. Extensive evaluations across diverse knowledge-intensive, mathematical, and general language modeling tasks demonstrate that AutoTIR achieves superior overall performance, significantly outperforming baselines and exhibits superior generalization in tool-use behavior. These results highlight the promise of reinforcement learning in building truly generalizable and scalable TIR capabilities in LLMs. The code and data are available at https://github.com/weiyifan1023/AutoTIR.

cs.CL↗

arXiv2025

DiffCkt: A Diffusion Model-Based Hybrid Neural Network Framework for Automatic Transistor-Level Generation of Analog Circuits

Analog circuit design consists of the pre-layout and layout phases. Among them, the pre-layout phase directly decides the final circuit performance, but heavily depends on experienced engineers to do manual design according to specific application scenarios. To overcome these challenges and automate the analog circuit pre-layout design phase, we introduce DiffCkt: a diffusion model-based hybrid neural network framework for the automatic transistor-level generation of analog circuits, which can directly generate corresponding circuit structures and device parameters tailored to specific performance requirements. To more accurately quantify the efficiency of circuits generated by DiffCkt, we introduce the Circuit Generation Efficiency Index (CGEI), which is determined by both the figure of merit (FOM) of a single generated circuit and the time consumed. Compared with relative research, DiffCkt has improved CGEI by a factor of $2.21 \sim 8365\times$, reaching a state-of-the-art (SOTA) level. In conclusion, this work shows that the diffusion model has the remarkable ability to learn and generate analog circuit structures and device parameters, providing a revolutionary method for automating the pre-layout design of analog circuits. The circuit dataset will be open source, its preview version is available at https://github.com/CjLiu-NJU/DiffCkt.

cs.ET↗

arXiv2025

AnalogTester: A Large Language Model-Based Framework for Automatic Testbench Generation in Analog Circuit Design

Recent advancements have demonstrated the significant potential of large language models (LLMs) in analog circuit design. Nevertheless, testbench construction for analog circuits remains manual, creating a critical bottleneck in achieving fully automated design processes. Particularly when replicating circuit designs from academic papers, manual Testbench construction demands time-intensive implementation and frequent adjustments, which fails to address the dynamic diversity and flexibility requirements for automation. AnalogTester tackles automated analog design challenges through an LLM-powered pipeline: a) domain-knowledge integration, b) paper information extraction, c) simulation scheme synthesis, and d) testbench code generation with Tsinghua Electronic Design (TED). AnalogTester has demonstrated automated Testbench generation capabilities for three fundamental analog circuit types: operational amplifiers (op-amps), bandgap references (BGRs), and low-dropout regulators (LDOs), while maintaining a scalable framework for adaptation to broader circuit topologies. Furthermore, AnalogTester can generate circuit knowledge data and TED code corpus, establishing fundamental training datasets for LLM specialization in analog circuit design automation.

cs.MA↗

arXiv2025

CI-VID: A Coherent Interleaved Text-Video Dataset

Text-to-video (T2V) generation has recently attracted considerable attention, resulting in the development of numerous high-quality datasets that have propelled progress in this area. However, existing public datasets are primarily composed of isolated text-video (T-V) pairs and thus fail to support the modeling of coherent multi-clip video sequences. To address this limitation, we introduce CI-VID, a dataset that moves beyond isolated text-to-video (T2V) generation toward text-and-video-to-video (TV2V) generation, enabling models to produce coherent, multi-scene video sequences. CI-VID contains over 340,000 samples, each featuring a coherent sequence of video clips with text captions that capture both the individual content of each clip and the transitions between them, enabling visually and textually grounded generation. To further validate the effectiveness of CI-VID, we design a comprehensive, multi-dimensional benchmark incorporating human evaluation, VLM-based assessment, and similarity-based metrics. Experimental results demonstrate that models trained on CI-VID exhibit significant improvements in both accuracy and content consistency when generating video sequences. This facilitates the creation of story-driven content with smooth visual transitions and strong temporal coherence, underscoring the quality and practical utility of the CI-VID dataset We release the CI-VID dataset and the accompanying code for data construction and evaluation at: https://github.com/ymju-BAAI/CI-VID

cs.CV↗

arXiv2025

A Large Language Model-based Multi-Agent Framework for Analog Circuits' Sizing Relationships Extraction

In the design process of the analog circuit pre-layout phase, device sizing is an important step in determining whether an analog circuit can meet the required performance metrics. Many existing techniques extract the circuit sizing task as a mathematical optimization problem to solve and continuously improve the optimization efficiency from a mathematical perspective. But they ignore the automatic introduction of prior knowledge, fail to achieve effective pruning of the search space, which thereby leads to a considerable compression margin remaining in the search space. To alleviate this problem, we propose a large language model (LLM)-based multi-agent framework for analog circuits' sizing relationships extraction from academic papers. The search space in the sizing process can be effectively pruned based on the sizing relationship extracted by this framework. Eventually, we conducted tests on 3 types of circuits, and the optimization efficiency was improved by $2.32 \sim 26.6 \times$. This work demonstrates that the LLM can effectively prune the search space for analog circuit sizing, providing a new solution for the combination of LLMs and conventional analog circuit design automation methods.

cs.AI↗

arXiv2025

Infinity Instruct: Scaling Instruction Selection and Synthesis to Enhance Language Models

Large Language Models (LLMs) demonstrate strong performance in real-world applications, yet existing open-source instruction datasets often concentrate on narrow domains, such as mathematics or coding, limiting generalization and widening the gap with proprietary models. To bridge this gap, we introduce Infinity-Instruct, a high-quality instruction dataset designed to enhance both foundational and chat capabilities of LLMs through a two-phase pipeline. In Phase 1, we curate 7.4M high-quality foundational instructions (InfInstruct-F-7.4M) from over 100M samples using hybrid data selection techniques. In Phase 2, we synthesize 1.5M high-quality chat instructions (InfInstruct-G-1.5M) through a two-stage process involving instruction selection, evolution, and diagnostic filtering. We empirically evaluate Infinity-Instruct by fine-tuning several open-source models, including Mistral, LLaMA, Qwen, and Yi, and observe substantial performance gains across both foundational and instruction following benchmarks, consistently surpassing official instruction-tuned counterparts. Notably, InfInstruct-LLaMA3.1-70B outperforms GPT-4-0314 by 8.6\% on instruction following tasks while achieving comparable foundational performance. These results underscore the synergy between foundational and chat training and offer new insights into holistic LLM development. Our dataset\footnote{https://huggingface.co/datasets/BAAI/Infinity-Instruct} and codes\footnote{https://gitee.com/li-touch/infinity-instruct} have been publicly released.

cs.CL↗

arXiv2025

Com$^2$: A Causal-Guided Benchmark for Exploring Complex Commonsense Reasoning in Large Language Models

Large language models (LLMs) have mastered abundant simple and explicit commonsense knowledge through pre-training, enabling them to achieve human-like performance in simple commonsense reasoning. Nevertheless, LLMs struggle to reason with complex and implicit commonsense knowledge that is derived from simple ones (such as understanding the long-term effects of certain events), an aspect humans tend to focus on more. Existing works focus on complex tasks like math and code, while complex commonsense reasoning remains underexplored due to its uncertainty and lack of structure. To fill this gap and align with real-world concerns, we propose a benchmark Com$^2$ focusing on complex commonsense reasoning. We first incorporate causal event graphs to serve as structured complex commonsense. Then we adopt causal theory~(e.g., intervention) to modify the causal event graphs and obtain different scenarios that meet human concerns. Finally, an LLM is employed to synthesize examples with slow thinking, which is guided by the logical relationships in the modified causal graphs. Furthermore, we use detective stories to construct a more challenging subset. Experiments show that LLMs struggle in reasoning depth and breadth, while post-training and slow thinking can alleviate this. The code and data are available at https://github.com/Waste-Wood/Com2.

cs.CL↗

arXiv2025

T-REX: Mixture-of-Rank-One-Experts with Semantic-aware Intuition for Multi-task Large Language Model Finetuning

Large language models (LLMs) encounter significant adaptation challenges in diverse multitask finetuning. Mixture-of-experts (MoE) provides a promising solution with a dynamic architecture, enabling effective task decoupling. However, scaling up the number of MoE experts incurs substantial parameter and computational overheads and suffers from limited performance gain due to naive routing mechanisms. In this paper, we design a novel framework, mix\underline{\textbf{T}}ure\underline{\textbf{-}}of-\underline{\textbf{R}}ank-on\underline{\textbf{E}}-e\underline{\textbf{X}}perts (\texttt{T-REX}), which leverages the combination of ultra-low rank experts to construct LoRA weights on pretrained LLMs. The rank-1 experts enable a mix-and-match mechanism to quadratically expand the vector subspace of experts with linear parameter overheads, achieving approximate error reduction with optimal efficiency. In addition, T-REX offers implicit guidance to the router, leveraging the inherent semantic clustering of training embeddings as prior knowledge, enabling optimized feature allocation across experts for a smoother convergence. Extensive theoretical and empirical results demonstrate that T-REX achieves superior efficiency and generalizability across diverse tasks. Compared with other LoRA-based methods, T-REX achieves up to 1.78\% mean accuracy improvement with around 30\%-40\% less trainable parameters across 14 public datasets. \href{https://github.com/RoyZry98/T-REX-Pytorch}{Code} is available.

cs.LG↗