arXiv subjects

Li Niu

Publications and source records attributed to Li Niu.

At least 19 recordsLinked to original sources

arXiv2026

R2M-Bench: Evaluating Revisit Memory via Relative Consistency in Interactive Video World Models

High similarity between first-visit and return frames does not necessarily show that a video world model remembered the scene; the intervening rollout may simply have changed very little. This ambiguity makes absolute revisit scores sensitive to rendering stability, repetitive content, and failed motion. We introduce \emph{R2M-Bench} (\textbf{R}elative \textbf{R}evisit \textbf{M}emory Benchmark), a benchmark of observable revisit-selective consistency. For every detected return, R2M-Bench compares the revisit pair with two controls from the same rollout: a gap-matched non-revisit pair that measures generic temporal stability and a short-range pair that estimates short-horizon consistency. These comparisons produce \emph{MemoryGain} (MG), the revisit advantage over the temporal baseline, and the \emph{Normalized Memory Ratio} (NMR), which normalizes this advantage by the short-to-baseline dynamic range. R2M-Bench combines 100 reference scenes with three leave-and-return trajectories to form 300 instances and evaluates appearance fidelity, scene and object identity, local geometry, and persistent state. Across seven action-conditioned video world models, Overall NMR correlates with human consistency judgments at Spearman's $\rho=0.547$ (95\% CI $[0.45,0.63]$). Its within-model correlation magnitude with generated motion is $0.072$, compared with $0.207$ for raw revisit similarity, indicating that relative calibration substantially reduces the slow-motion shortcut. DreamX-World-Memo achieves the highest Overall NMR among the evaluated video models. Together, these results support same-rollout relative calibration as a practical way to distinguish revisit-specific consistency from generic temporal stability.

cs.CV↗

arXiv2026

Hybrid Generative-Discriminative Object Placement

As an important operation of image composition, object placement aims to predict the plausible placement (location, scale) for the inserted foreground object. Previous object placement methods can be divided into generative methods and discriminative methods, both of which cannot balance efficiency and effectiveness well. In this work, we propose a semi-generative method in the middle ground between them. In particular, we assign uniformly distributed anchors on the background. Then, we fuse foreground and background features to predict the rationality score for each anchor and predict plausible placement sets for positive anchors. Extensive experiments on the OPA dataset show that our method can strike a good balance between efficiency and effectiveness.

cs.CV↗

arXiv2026

Why Struggle with Continuous Latents? Interpretable Discrete Latent Reasoning via Rendered Compression

Large language models achieve high reasoning performance via explicit chain-of-thought and reinforcement learning, but require long output sequences and extended inference time. Latent reasoning reduces this cost by shifting computation into a latent space; however, continuous latent methods are hard to train, suffering from unstable and uninterpretable reasoning trajectories. We argue these issues stem from a misalignment between continuous-space reasoning and discrete symbolic supervision, as continuous states lack explicit anchors for step-by-step alignment. To resolve this, we propose \textbf{Discrete Latent Reasoning~(DLR)}, the first method that converts continuous latent states into explicit discrete tokens. Inspired by render-based compression, we render textual chains of thought into images, extract visual features, and construct a discrete latent vocabulary via clustering-based fine-tuning. Expanding the vocabulary and output head enables standard autoregressive modeling over both natural language and latent tokens, supporting pretraining alignment, SFT, and RL. Experiments on five reasoning benchmarks and two model series~(Qwen3-VL and LLaMA-3) confirm that \textbf{DLR} outperforms prior latent reasoning baselines with up to \textbf{20$\times$ compression}. Furthermore, the learned latent trajectories retain an interpretable semantic structure. Overall, discrete latent tokens provide a controllable and interpretable basis for efficient latent reasoning.

cs.CL↗

arXiv2026

In-context Region-based Drag: Drag Any Region to Any Shape

Diffusion models have shown promise in drag-style editing. Previous works mainly focus on point-based drag, which is inherently ambiguous. This paper focuses on region-based drag and introduces a novel In-Context Region-based Drag (ICRDrag) method. Under the in-context learning framework, ICRDrag consumes a source image, a source region mask, and a target region mask, producing the target dragged image. Built upon the basic in-context learning model, we introduce two novel attention regularization: 1) image-mask attention consistency to ensure that a target region attends to similar source regions for image and mask modalities; 2) source-target attention correspondence to ensure the mutual correspondence between source and target regions. To facilitate region-based drag, we also construct Paired Region Dataset (PRD), a large-scale dataset with paired masks and images. Extensive experiments show that ICRDrag significantly outperforms existing methods in both quantitative metrics and user studies, achieving superior editing accuracy and visual fidelity. The dataset, code, and model are available at https://github.com/bcmi/ICRDrag-Region-Drag-Editing.

cs.CV↗

arXiv2026

Unlocking the Black Box of Latent Reasoning: An Interpretability-Guided Approach to Intervention

Latent reasoning enables Large Language Models (LLMs) to perform multi-step inference within continuous hidden states, offering efficiency gains over explicit Chain-of-Thought (CoT). However, the opacity of these continuous thought vectors hinders their reliability and controllability. This paper bridges the gap between mechanistic interpretability and actionable control. We first present a systematic analysis using structural, causal, and geometric probes, revealing that latent vectors encode compressed, faithful representations of reasoning steps, with early vectors acting as critical causal hubs. Building on this, we operationalize these interpretability insights into a suite of training-free, decode-time interventions that refine the latent reasoning process by imposing the identified geometric and semantic priors. Extensive experiments across multiple model scales and diverse task domains demonstrate that our approaches consistently improve reasoning accuracy. Our interpretability-guided interventions consistently unlock latent capabilities and improve reasoning accuracy without any parameter updates.

cs.CL↗

arXiv2026

Breaking Dual Bottlenecks: Evolving Unified Multimodal Models into Self-Adaptive Interleaved Visual Reasoners

Recent unified models integrate multimodal understanding and generation within a single framework. However, an "understanding-generation gap" persists, where models can capture user intent but often fail to translate this semantic knowledge into precise pixel-level manipulation. This gap results in two bottlenecks in anything-to-image task (X2I): the attention entanglement bottleneck, where blind planning struggles with complex prompts, and the visual refinement bottleneck, where unstructured feedback fails to correct imperfections efficiently. In this paper, we propose a novel framework that empowers unified models to autonomously switch between generation strategies based on instruction complexity and model capability. To achieve this, we construct a hierarchical data pipeline that constructs execution paths across three adaptive modes: direct generation for simple cases, self-reflection for quality refinement, and multi-step planning for decomposing complex scenarios. Building on this pipeline, we contribute a high-quality dataset with over 50,000 samples and implement a two-stage training strategy comprising SFT and RL. Specifically, we design step-wise reasoning rewards to ensure logical consistency and intra-group complexity penalty to prevent redundant computational overhead. Extensive experiments demonstrate that our method outperforms existing baselines on X2I, achieving superior generation fidelity among simple-to-complex instructions. The code is released at https://github.com/WeChatCV/Interleaved_Visual_Reasoner.

cs.CV↗

arXiv2026

Reflection Generation for Composite Image Using Diffusion Model

Image composition involves inserting a foreground object into the background while synthesizing environment-consistent effects such as shadows and reflections. Although shadow generation has been extensively studied, reflection generation remains largely underexplored. In this work, we focus on reflection generation. We inject the prior information of reflection placement and reflection appearance into foundation diffusion model. We also divide reflections into two types and adopt type-aware model design. To support training, we construct the first large-scale object reflection dataset DEROBA. Experiments demonstrate that our method generates reflections that are physically coherent and visually realistic, establishing a new benchmark for reflection generation.

cs.CV↗

arXiv2026

Uni-Classifier: Leveraging Video Diffusion Priors for Universal Guidance Classifier

In practical AI workflows, complex tasks often involve chaining multiple generative models, such as using a video or 3D generation model after a 2D image generator. However, distributional mismatches between the output of upstream models and the expected input of downstream models frequently degrade overall generation quality. To address this issue, we propose Uni-Classifier (Uni-C), a simple yet effective plug-and-play module that leverages video diffusion priors to guide the denoising process of preceding models, thereby aligning their outputs with downstream requirements. Uni-C can also be applied independently to enhance the output quality of individual generative models. Extensive experiments across video and 3D generation tasks demonstrate that Uni-C consistently improves generation quality in both workflow-based and standalone settings, highlighting its versatility and strong generalization capability.

cs.CV↗

arXiv2026

OSInsert: Towards High-authenticity and High-fidelity Image Composition

Generative image composition aims to regenerate the given foreground object in the background image to produce a realistic composite image. Some high-authenticity methods can adjust foreground pose/view to be compatible with background, while some high-fidelity methods can preserve the foreground details accurately. However, existing methods can hardly achieve both goals at the same time. In this work, we propose a two-stage strategy to achieve both goals. In the first stage, we use high-authenticity method to generate reasonable foreground shape, serving as the condition of high-fidelity method in the second stage. The experiments on MureCOM dataset verify the effectiveness of our two-stage strategy. The code and model have been released at https://github.com/bcmi/OSInsert-Image-Composition.

cs.CV↗

arXiv2026

DynaDrag: Dynamic Drag-Style Image Editing by Motion Prediction

To achieve pixel-level image manipulation, drag-style image editing which edits images using points or trajectories as conditions is attracting widespread attention. Most previous methods follow move-and-track framework, in which miss tracking and ambiguous tracking are unavoidable challenging issues. Other methods under different frameworks suffer from various problems like the huge gap between source image and target edited image as well as unreasonable intermediate point which can lead to low editability. To avoid these problems, we propose DynaDrag, the first dragging method under predict-and-move framework. In DynaDrag, Motion Prediction and Motion Supervision are performed iteratively. In each iteration, Motion Prediction first predicts where the handle points should move, and then Motion Supervision drags them accordingly. We also propose to dynamically adjust the valid handle points to further improve the performance. Experiments on face and human datasets showcase the superiority over previous works.

cs.CV↗

arXiv2025

D$^{3}$ToM: Decider-Guided Dynamic Token Merging for Accelerating Diffusion MLLMs

Diffusion-based multimodal large language models (Diffusion MLLMs) have recently demonstrated impressive non-autoregressive generative capabilities across vision-and-language tasks. However, Diffusion MLLMs exhibit substantially slower inference than autoregressive models: Each denoising step employs full bidirectional self-attention over the entire sequence, resulting in cubic decoding complexity that becomes computationally impractical with thousands of visual tokens. To address this challenge, we propose D$^{3}$ToM, a Decider-guided dynamic token merging method that dynamically merges redundant visual tokens at different denoising steps to accelerate inference in Diffusion MLLMs. At each denoising step, D$^{3}$ToM uses decider tokens-the tokens generated in the previous denoising step-to build an importance map over all visual tokens. Then it maintains a proportion of the most salient tokens and merges the remainder through similarity-based aggregation. This plug-and-play module integrates into a single transformer layer, physically shortening the visual token sequence for all subsequent layers without altering model parameters. Moreover, D$^{3}$ToM employs a merge ratio that dynamically varies with each denoising step, aligns with the native decoding process of Diffusion MLLMs, achieving superior performance under equivalent computational budgets. Extensive experiments show that D$^{3}$ToM accelerates inference while preserving competitive performance. The code is released at https://github.com/bcmi/D3ToM-Diffusion-MLLM.

cs.CV↗

arXiv2025

CareCom: Generative Image Composition with Calibrated Reference Features

Image composition aims to seamlessly insert foreground object into background. Despite the huge progress in generative image composition, the existing methods are still struggling with simultaneous detail preservation and foreground pose/view adjustment. To address this issue, we extend the existing generative composition model to multi-reference version, which allows using arbitrary number of foreground reference images. Furthermore, we propose to calibrate the global and local features of foreground reference images to make them compatible with the background information. The calibrated reference features can supplement the original reference features with useful global and local information of proper pose/view. Extensive experiments on MVImgNet and MureCom demonstrate that the generative model can greatly benefit from the calibrated reference features.

cs.CV↗

arXiv2025

RAPO++: Cross-Stage Prompt Optimization for Text-to-Video Generation via Data Alignment and Test-Time Scaling

Prompt design plays a crucial role in text-to-video (T2V) generation, yet user-provided prompts are often short, unstructured, and misaligned with training data, limiting the generative potential of diffusion-based T2V models. We present \textbf{RAPO++}, a cross-stage prompt optimization framework that unifies training-data--aligned refinement, test-time iterative scaling, and large language model (LLM) fine-tuning to substantially improve T2V generation without modifying the underlying generative backbone. In \textbf{Stage 1}, Retrieval-Augmented Prompt Optimization (RAPO) enriches user prompts with semantically relevant modifiers retrieved from a relation graph and refactors them to match training distributions, enhancing compositionality and multi-object fidelity. \textbf{Stage 2} introduces Sample-Specific Prompt Optimization (SSPO), a closed-loop mechanism that iteratively refines prompts using multi-source feedback -- including semantic alignment, spatial fidelity, temporal coherence, and task-specific signals such as optical flow -- yielding progressively improved video generation quality. \textbf{Stage 3} leverages optimized prompt pairs from SSPO to fine-tune the rewriter LLM, internalizing task-specific optimization patterns and enabling efficient, high-quality prompt generation even before inference. Extensive experiments across five state-of-the-art T2V models and five benchmarks demonstrate that RAPO++ achieves significant gains in semantic alignment, compositional reasoning, temporal stability, and physical plausibility, outperforming existing methods by large margins. Our results highlight RAPO++ as a model-agnostic, cost-efficient, and scalable solution that sets a new standard for prompt optimization in T2V generation. The code is available at https://github.com/Vchitect/RAPO.

cs.CV↗

arXiv2025

Fine-Grained GRPO for Precise Preference Alignment in Flow Models

The incorporation of online reinforcement learning (RL) into diffusion and flow-based generative models has recently gained attention as a powerful paradigm for aligning model behavior with human preferences. By leveraging stochastic sampling via Stochastic Differential Equations (SDEs) during the denoising phase, these models can explore a variety of denoising trajectories, enhancing the exploratory capacity of RL. However, despite their ability to discover potentially high-reward samples, current approaches often struggle to effectively align with preferences due to the sparsity and narrowness of reward feedback. To overcome this limitation, we introduce a novel framework called Granular-GRPO (G$^2$RPO), which enables fine-grained and comprehensive evaluation of sampling directions in the RL training of flow models. Specifically, we propose a Singular Stochastic Sampling mechanism that supports step-wise stochastic exploration while ensuring strong correlation between injected noise and reward signals, enabling more accurate credit assignment to each SDE perturbation. Additionally, to mitigate the bias introduced by fixed-granularity denoising, we design a Multi-Granularity Advantage Integration module that aggregates advantages computed across multiple diffusion scales, resulting in a more robust and holistic assessment of sampling trajectories. Extensive experiments on various reward models, including both in-domain and out-of-domain settings, demonstrate that our G$^2$RPO outperforms existing flow-based GRPO baselines, highlighting its effectiveness and generalization capability.

cs.LG↗

arXiv2025

Electric-Magnetic-Switchable Free-Space Skyrmions in Toroidal Light Pulses via a Nonlinear Metasurface

Recent advances reveal that light propagation in free space supports many exotic topological textures, such as skyrmions. Their unique space-time topologies make them promising candidates as next-generation robust information carriers. Hence, the ability of switching different texture modes is highly demanded to serve as a manner of data transfer. However, previous studies focus on generation of one specific mode, lacking integrated devices with externally variable and stable mode generation capability. Here, we experimentally demonstrate the first realization of switchable skyrmions between electric and magnetic modes in toroidal light pulses using a nonlinear metasurface platform in terms of broadband terahertz generation driven by vectorial pulse. The spatial and temporal evolutions of them are also clearly observed. Our work establishes a new paradigm for manipulating and switching topologically structured light.

physics.optics↗

arXiv2025

AnimateScene: Camera-controllable Animation in Any Scene

Recent advances in 3D scene reconstruction and 4D human animation have broadened adoption, but integrating the two remains difficult. Key challenges include placing humans at plausible locations and scales without interpenetration, aligning lighting and style between humans and background, and handling dynamic camera trajectories. We introduce AnimateScene, a unified framework addressing these issues. First, an accurate placement module automatically determines realistic 3D positions and prevents collisions during motion. Second, we propose a training-free style alignment method that adapts the 4D human to match background illumination and appearance, achieving coherent composites. Finally, we design a joint post-reconstruction approach that incorporates camera trajectories for smooth, visually engaging motion videos. Experiments across diverse scenes and actions demonstrate that AnimateScene generates dynamic results with high geometric detail and strong spatiotemporal coherence. The project page is available at https://whynothaha.github.io/AnimateScene/AnimateScene.html.

cs.CV↗

arXiv2025

Unsupervised Exposure Correction

Current exposure correction methods have three challenges, labor-intensive paired data annotation, limited generalizability, and performance degradation in low-level computer vision tasks. In this work, we introduce an innovative Unsupervised Exposure Correction (UEC) method that eliminates the need for manual annotations, offers improved generalizability, and enhances performance in low-level downstream tasks. Our model is trained using freely available paired data from an emulated Image Signal Processing (ISP) pipeline. This approach does not need expensive manual annotations, thereby minimizing individual style biases from the annotation and consequently improving its generalizability. Furthermore, we present a large-scale Radiometry Correction Dataset, specifically designed to emphasize exposure variations, to facilitate unsupervised learning. In addition, we develop a transformation function that preserves image details and outperforms state-of-the-art supervised methods [12], while utilizing only 0.01% of their parameters. Our work further investigates the broader impact of exposure correction on downstream tasks, including edge detection, demonstrating its effectiveness in mitigating the adverse effects of poor exposure on low-level features. The source code and dataset are publicly available at https://github.com/BeyondHeaven/uec_code.

cs.CV↗

arXiv2025

The Devil is in the Prompts: Retrieval-Augmented Prompt Optimization for Text-to-Video Generation

The evolution of Text-to-video (T2V) generative models, trained on large-scale datasets, has been marked by significant progress. However, the sensitivity of T2V generative models to input prompts highlights the critical role of prompt design in influencing generative outcomes. Prior research has predominantly relied on Large Language Models (LLMs) to align user-provided prompts with the distribution of training prompts, albeit without tailored guidance encompassing prompt vocabulary and sentence structure nuances. To this end, we introduce RAPO, a novel Retrieval-Augmented Prompt Optimization framework. In order to address potential inaccuracies and ambiguous details generated by LLM-generated prompts. RAPO refines the naive prompts through dual optimization branches, selecting the superior prompt for T2V generation. The first branch augments user prompts with diverse modifiers extracted from a learned relational graph, refining them to align with the format of training prompts via a fine-tuned LLM. Conversely, the second branch rewrites the naive prompt using a pre-trained LLM following a well-defined instruction set. Extensive experiments demonstrate that RAPO can effectively enhance both the static and dynamic dimensions of generated videos, demonstrating the significance of prompt optimization for user-provided prompts.

cs.CV↗