arXiv subjects

Liang Jiang

Publications and source records attributed to Liang Jiang.

At least 217 records · Page 12Linked to original sources

arXiv2020

Ground-state Pulsed Cavity Electro-optics for Microwave-to-optical Conversion

In the development of quantum microwave-to-optical (MO) converters, excessive noise induced by the parametric optical drive remains a major challenge at milli-Kelvin temperatures. Here we study the extraneous noise added to an electro-optic transducer in its quantum ground state under an intense pulsed optical excitation. The integrated electro-optical transducer leverages the inherent Pockels effect of aluminum nitride microrings, flip-chip bonded to a superconducting resonator. Applying a pulsed optical drive with peak power exceeding the cooling power of the dilution refrigerator at its base temperature, we observe efficient bi-directional MO conversion, with near-ground state microwave thermal excitation ($\bar{n}_\mathrm{e}=0.09\pm0.06$). Time evolution study reveals that the residual thermal excitation is dominated by the superconductor absorption of stray light scattered off the chip-fiber interface. Our results shed light on suppressing microwave noise in a cavity electro-optic system under intense optical drive, which is an essential step towards quantum state transduction between microwave and optical frequencies.

quant-ph↗

arXiv2020

Interference-based universal decoupling and swapping for multimode bosonic systems

Beam-splitter operations are widely used to process information encoded in bosonic modes. In hybrid quantum systems, however, it might be challenging to implement a reliable beam-splitter operation between two distinct bosonic modes. Without beam-splitters, some basic operations such as decoupling modes and swapping states between modes can become highly non-trivial or not feasible at all. In this work, we develop novel interference-based protocols for decoupling and swapping selected modes of a multimode bosonic system without requiring beam-splitters. Specifically, for a given generic coupler characterized by a Gaussian unitary process, we show how to decouple a single mode or swap any pair of modes with a constant depth sequence of operations, while maintaining the coupling for the remaining system. These protocols require only multiple uses of the given coupler, interleaved with single-mode Gaussian unitary operations, and thus enable efficient construction of operations crucial to quantum information science, such as high-fidelity quantum transduction. Our results are directly derived from fundamental physical properties of bosonic systems and are therefore broadly applicable to various existing platforms.

quant-ph↗

arXiv2020

Unboxing Quantum Black Box Models: Learning Non-Markovian Dynamics

Characterizing the memory properties of the environment has become critical for the high-fidelity control of qubits and other advanced quantum systems. However, current non-Markovian tomography techniques are either limited to discrete superoperators, or they employ machine learning methods, neither of which provide physical insight into the dynamics of the quantum system. To circumvent this limitation, we design learning architectures that explicitly encode physical constraints like the properties of completely-positive trace-preserving maps in a differential form. This method preserves the versatility of the machine learning approach without sacrificing the efficiency and fidelity of traditional parameter estimation methods. Our approach provides the physical interpretability that machine learning and opaque superoperators lack. Moreover, it is aware of the underlying continuous dynamics typically disregarded by superoperator-based tomography. This paradigm paves the way to noise-aware optimal quantum control and opens a path to exploiting the bath as a control and error mitigation resource.

quant-ph↗

arXiv2020

Efficient classical simulation of noisy random quantum circuits in one dimension

Understanding the computational power of noisy intermediate-scale quantum (NISQ) devices is of both fundamental and practical importance to quantum information science. Here, we address the question of whether error-uncorrected noisy quantum computers can provide computational advantage over classical computers. Specifically, we study noisy random circuit sampling in one dimension (or 1D noisy RCS) as a simple model for exploring the effects of noise on the computational power of a noisy quantum device. In particular, we simulate the real-time dynamics of 1D noisy random quantum circuits via matrix product operators (MPOs) and characterize the computational power of the 1D noisy quantum system by using a metric we call MPO entanglement entropy. The latter metric is chosen because it determines the cost of classical MPO simulation. We numerically demonstrate that for the two-qubit gate error rates we considered, there exists a characteristic system size above which adding more qubits does not bring about an exponential growth of the cost of classical MPO simulation of 1D noisy systems. Specifically, we show that above the characteristic system size, there is an optimal circuit depth, independent of the system size, where the MPO entanglement entropy is maximized. Most importantly, the maximum achievable MPO entanglement entropy is bounded by a constant that depends only on the gate error rate, not on the system size. We also provide a heuristic analysis to get the scaling of the maximum achievable MPO entanglement entropy as a function of the gate error rate. The obtained scaling suggests that although the cost of MPO simulation does not increase exponentially in the system size above a certain characteristic system size, it does increase exponentially as the gate error rate decreases, possibly making classical simulation practically not feasible even with state-of-the-art supercomputers.

quant-ph↗

arXiv2020

Perfect coherent transfer in an on-chip reconfigurable nanoelectromechanical network

Realizing a controllable network with multiple degrees of interaction is a challenge to physics and engineering. Here, we experimentally report an on-chip reconfigurable network based on nanoelectromechanical resonators with nearest-neighbor (NN) and next-nearest-neighbor (NNN) strong couplings. By applying different parametric voltages on the same on-chip device, we carry out perfect coherent transfer in NN and NNN coupled array networks. Moreover, the low-loss resonators ensure the desired evolution to achieve perfect transfer and the demonstration of the parity-dependent phase relation at transmission cycles. The realization of NNN couplings demonstrates the capability of engineering coherent coupling beyond a simple model of a NN coupled array of doubly clamped resonators. Our reconfigurable nanoelectromechanical network provides a highly tunable physical platform and offers the possibilities of investigating various interesting phenomena, such as topological transport, synchronization of networks, as well as metamaterials.

quant-ph↗

arXiv2020

Path-Independent Quantum Gates with Noisy Ancilla

Ancilla systems are often indispensable to universal control of a nearly isolated quantum system. However, ancilla systems are typically more vulnerable to environmental noise, which limits the performance of such ancilla-assisted quantum control. To address this challenge of ancilla-induced decoherence, we propose a general framework that integrates quantum control and quantum error correction, so that we can achieve robust quantum gates resilient to ancilla noise. We introduce the path independence criterion for fault-tolerant quantum gates against ancilla errors. As an example, a path-independent gate is provided for superconducting circuits with a hardware-efficient design.

quant-ph↗

arXiv2020

Saturating the quantum Cramér-Rao bound using LOCC

The quantum Cramér-Rao bound (QCRB) provides an ultimate precision limit allowed by quantum mechanics in parameter estimation. Given any quantum state dependent on a single parameter, there is always a positive-operator valued measurement (POVM) saturating the QCRB. However, the QCRB-saturating POVM cannot always be implemented efficiently, especially in multipartite systems. In this paper, we show that the POVM based on local operations and classical communication (LOCC) is QCRB-saturating for arbitrary pure states or rank-two mixed states with varying probability distributions over fixed eigenbasis. Local measurements without classical communication, however, is not QCRB-saturating in general.

quant-ph↗

arXiv2020

Optimal probes and error-correction schemes in multi-parameter quantum metrology

We derive a necessary and sufficient condition for the possibility of achieving the Heisenberg scaling in general adaptive multi-parameter estimation schemes in presence of Markovian noise. In situations where the Heisenberg scaling is achievable, we provide a semidefinite program to identify the optimal quantum error correcting (QEC) protocol that yields the best estimation precision. We overcome the technical challenges associated with potential incompatibility of the measurement optimally extracting information on different parameters by utilizing the Holevo Cramér-Rao (HCR) bound for pure states. We provide examples of significant advantages offered by our joint-QEC protocols, that sense all the parameters utilizing a single error-corrected subspace, over separate-QEC protocols where each parameter is effectively sensed in a separate subspace.

quant-ph↗

arXiv2020

Waveguide cavity optomagnonics for broadband multimode microwave-to-optics conversion

Cavity optomagnonics has emerged as a promising platform for studying coherent photon-spin interactions as well as tunable microwave-to-optical conversion. However, current implementation of cavity optomagnonics in ferrimagnetic crystals remains orders of magnitude larger in volume than state-of-the-art cavity optomechanical devices, resulting in very limited magneto-optical interaction strength. Here, we demonstrate a cavity optomagnonic device based on integrated waveguides and its application for microwave-to-optical conversion. By designing a ferrimagnetic rib waveguide to support multiple magnon modes with maximal mode overlap to the optical field, we realize a high magneto-optical cooperativity which is three orders of magnitude higher compared to previous records obtained on polished YIG spheres. Furthermore, we achieve tunable conversion of microwave photons at around 8.45 GHz to 1550 nm light with a broad conversion bandwidth as large as 16.1 MHz. The unique features of the system point to novel applications at the crossroad between quantum optics and magnonics.

cond-mat.mes-hall↗

arXiv2020

Efficient cavity control with SNAP gates

Microwave cavities coupled to superconducting qubits have been demonstrated to be a promising platform for quantum information processing. A major challenge in this setup is to realize universal control over the cavity. A promising approach are selective number-dependent arbitrary phase (SNAP) gates combined with cavity displacements. It has been proven that this is a universal gate set, but a central question remained open so far: how can a given target operation be realized efficiently with a sequence of these operations. In this work, we present a practical scheme to address this problem. It involves a hierarchical strategy to insert new gates into a sequence, followed by a co-optimization of the control parameters, which generates short high-fidelity sequences. For a broad range of experimentally relevant applications, we find that they can be implemented with 3 to 4 SNAP gates, compared to up to 50 with previously known techniques.

quant-ph↗

arXiv2020

Error-detected state transfer and entanglement in a superconducting quantum network

Modular networks are a promising paradigm for increasingly complex quantum devices based on the ability to transfer qubits and generate entanglement between modules. These tasks require a low-loss, high-speed intermodule link that enables extensible network connectivity. Satisfying these demands simultaneously remains an outstanding goal for long-range optical quantum networks as well as modular superconducting processors within a single cryostat. We demonstrate communication and entanglement in a superconducting network with a microwave-actuated beamsplitter transformation between two bosonic qubits, which are housed in separate modules and joined by a demountable coaxial bus resonator. We transfer a qubit in a multi-photon encoding and track photon loss events to improve the fidelity, making it as high as in a single-photon encoding. Furthermore, generating entanglement with two-photon interference and postselection against loss errors produces a Bell state with success probability 79% and fidelity 0.94, halving the error obtained with a single photon. These capabilities demonstrate several promising methods for faithful operations between modules, including novel possibilities for resource-efficient direct gates.

quant-ph↗

arXiv2020

Spin wave based tunable switch between superconducting flux qubits

Quantum computing hardware has received world-wide attention and made considerable progress recently. YIG thin film have spin wave (magnon) modes with low dissipation and reliable control for quantum information processing. However, the coherent coupling between a quantum device and YIG thin film has yet been demonstrated. Here, we propose a scheme to achieve strong coupling between superconducting flux qubits and magnon modes in YIG thin film. Unlike the direct $\sqrt{N}$ enhancement factor in coupling to the Kittel mode or other spin ensembles, with N the total number of spins, an additional spatial dependent phase factor needs to be considered when the qubits are magnetically coupled with the magnon modes of finite wavelength. To avoid undesirable cancelation of coupling caused by the symmetrical boundary condition, a CoFeB thin layer is added to one side of the YIG thin film to break the symmetry. Our numerical simulation demonstrates avoided crossing and coherent transfer of quantum information between the flux qubits and the standing spin waves in YIG thin films. We show that the YIG thin film can be used as a tunable switch between two flux qubits, which have modified shape with small direct inductive coupling between them. Our results manifest that it is possible to couple flux qubits while suppressing undesirable cross-talk.

quant-ph↗

arXiv2020

Long Short-Term Sample Distillation

In the past decade, there has been substantial progress at training increasingly deep neural networks. Recent advances within the teacher--student training paradigm have established that information about past training updates show promise as a source of guidance during subsequent training steps. Based on this notion, in this paper, we propose Long Short-Term Sample Distillation, a novel training policy that simultaneously leverages multiple phases of the previous training process to guide the later training updates to a neural network, while efficiently proceeding in just one single generation pass. With Long Short-Term Sample Distillation, the supervision signal for each sample is decomposed into two parts: a long-term signal and a short-term one. The long-term teacher draws on snapshots from several epochs ago in order to provide steadfast guidance and to guarantee teacher--student differences, while the short-term one yields more up-to-date cues with the goal of enabling higher-quality updates. Moreover, the teachers for each sample are unique, such that, overall, the model learns from a very diverse set of teachers. Comprehensive experimental results across a range of vision and NLP tasks demonstrate the effectiveness of this new training method.

cs.CV↗

arXiv2020

Distributed quantum sensing enhanced by continuous-variable error correction

A distributed sensing protocol uses a network of local sensing nodes to estimate a global feature of the network, such as a weighted average of locally detectable parameters. In the noiseless case, continuous-variable multipartite entanglement shared by the nodes can improve the precision of parameter estimation relative to the precision attainable by a network without shared entanglement; for an entangled protocol, the root-mean-square estimation error scales like $1/M$ with the number $M$ of sensing nodes, the so-called Heisenberg scaling, while for protocols without entanglement, the error scales like $1/\sqrt{M}$. However, in the presence of loss and other noise sources, although multipartite entanglement still has some advantages for sensing displacements and phases, the scaling of the precision with $M$ is less favorable. In this paper, we show that using continuous-variable error correction codes can enhance the robustness of sensing protocols against imperfections and reinstate Heisenberg scaling up to moderate values of $M$. Furthermore, while previous distributed sensing protocols could measure only a single quadrature, we construct a protocol in which both quadratures can be sensed simultaneously. Our work demonstrates the value of continuous-variable error correction codes in realistic sensing scenarios.

quant-ph↗

arXiv2020

Cavity piezo-mechanics for superconducting-nanophotonic quantum interface

Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10-GHz phonons are resonantly coupled with photons in a superconducting and a nanophotonic cavities at the same time. Benefited from the achieved large piezo-mechanical cooperativity ($C_\mathrm{em}\sim7$) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.

physics.optics↗

arXiv2020

Enhanced energy-constrained quantum communication over bosonic Gaussian channels

Quantum communication is an important branch of quantum information science, promising unconditional security to classical communication and providing the building block of a future large-scale quantum network. Noise in realistic quantum communication channels imposes fundamental limits on the communication rates of various quantum communication tasks. It is therefore crucial to identify or bound the quantum capacities of a quantum channel. Here, we consider Gaussian channels that model energy loss and thermal noise errors in realistic optical and microwave communication channels and study their various quantum capacities in the energy-constrained scenario. We provide improved lower bounds to various energy-constrained quantum capacities of these fundamental channels and show that higher communication rates can be attained than previously believed. Specifically, we show that one can boost the transmission rates of quantum information and private classical information by using a correlated multi-mode thermal state instead of the single-mode thermal state of the same energy.

quant-ph↗

arXiv2020

Microwave--Optical entanglement in a Strongly Coupled Electro-Optomechanical System

Quantum transduction between microwave and optics can be realized by quantum teleportation if given reliable microwave-optical entanglement, namely entanglement-based quantum transduction. To realize this protocol, an entangled source with high-fidelity between the two frequencies is necessary. In this paper, we study the microwave and optical entanglement generation based on a generic cavity electro-optomechanical system in the strong coupling regime. Splittings are shown in the microwave and optical output spectra and the frequency entanglement between the two modes is quantified. We show that entanglement can be straightforwardly encoded in the frequency-bin degree of freedom and propose a feasible experiment to verify entangled photon pairs. The experimental implementation is systematically analyzed, and the preferable parameter regime for entanglement verification is identified. An inequality is given as a criterion for good entanglement verification with analysis of practical imperfections.

quant-ph↗

arXiv2020

Encoding an oscillator into many oscillators

An outstanding challenge for quantum information processing using bosonic systems is Gaussian errors such as excitation loss and added thermal noise errors. Thus, bosonic quantum error correction (QEC) is essential. Most bosonic QEC schemes encode a finite-dimensional logical qubit or qudit into noisy bosonic oscillator modes. In this case, however, the infinite-dimensional bosonic nature of the physical system is lost at the error-corrected logical level. On the other hand, there are several proposals for encoding an oscillator mode into many noisy oscillator modes. However, these oscillator-into-oscillators encoding schemes are in the class of Gaussian quantum error correction. Therefore, these codes cannot correct practically relevant Gaussian errors due to the established no-go theorems which state that Gaussian errors cannot be corrected by using only Gaussian resources. Here, we circumvent these no-go results and show that it is possible to correct Gaussian errors by using Gottesman-Kitaev-Preskill (GKP) states as non-Gaussian resources. In particular, we propose a non-Gaussian oscillator-into-oscillators code, the two-mode GKP-repetition code, and demonstrate that it can correct additive Gaussian noise errors. In addition, we generalize the two-mode GKP-repetition code to an even broader class of non-Gaussian oscillator codes, namely, GKP-stabilizer codes. Specifically, we show that there exists a highly hardware-efficient GKP-stabilizer code, the GKP-two-mode-squeezing code, that can quadratically suppress additive Gaussian noise errors in both the position and momentum quadratures up to a small logarithmic correction. Moreover, for any GKP-stabilizer code, we show that logical Gaussian operations can be readily implemented by using only physical Gaussian operations. We also show that our oscillator codes can correct practically relevant excitation loss and thermal noise errors.

quant-ph↗