arXiv subjects

Liang Ma

Publications and source records attributed to Liang Ma.

At least 127 records · Page 7Linked to original sources

arXiv2017

Muscle Fatigue Analysis Using OpenSim

In this research, attempts are made to conduct concrete muscle fatigue analysis of arbitrary motions on OpenSim, a digital human modeling platform. A plug-in is written on the base of a muscle fatigue model, which makes it possible to calculate the decline of force-output capability of each muscle along time. The plug-in is tested on a three-dimensional, 29 degree-of-freedom human model. Motion data is obtained by motion capturing during an arbitrary running at a speed of 3.96 m/s. Ten muscles are selected for concrete analysis. As a result, the force-output capability of these muscles reduced to 60%-70% after 10 minutes' running, on a general basis. Erector spinae, which loses 39.2% of its maximal capability, is found to be more fatigue-exposed than the others. The influence of subject attributes (fatigability) is evaluated and discussed.

q-bio.TO↗

arXiv2016

Estimating the EMG response exclusively to fatigue during sustained static maximum voluntary contraction

The increase of surface electromyography (sEMG) root-mean-square (RMS) is very frequently used to determine fatigue. However, as RMS is also influenced by muscle force,its effective usage as indicator of fatigue is mainly limited to isometric, constant force tasks.This research develops a simple me-thodto preclude the effect of muscle force, hereby estimates the EMG amplitude response exclusively to fatigue with RMS. Experiment was carried out on the biceps brachiis of 15 subjects (7males, 8 females) during sustained static maximum voluntary contractions (sMVC).Result shows that the sEMG RMS response to fatigue increasesto 21.27% while muscle force decreasing to 50%MVC, which implies that more and more extra effort is needed as muscle fatigue intensifies. It would be promising to use the RMS response exclusively to fatigue as an indicator of muscle fatigue.

q-bio.TO↗

arXiv2015

Network Capability in Localizing Node Failures via End-to-end Path Measurements

We investigate the capability of localizing node failures in communication networks from binary states (normal/failed) of end-to-end paths. Given a set of nodes of interest, uniquely localizing failures within this set requires that different observable path states associate with different node failure events. However, this condition is difficult to test on large networks due to the need to enumerate all possible node failures. Our first contribution is a set of sufficient/necessary conditions for identifying a bounded number of failures within an arbitrary node set that can be tested in polynomial time. In addition to network topology and locations of monitors, our conditions also incorporate constraints imposed by the probing mechanism used. We consider three probing mechanisms that differ according to whether measurement paths are (i) arbitrarily controllable, (ii) controllable but cycle-free, or (iii) uncontrollable (determined by the default routing protocol). Our second contribution is to quantify the capability of failure localization through (1) the maximum number of failures (anywhere in the network) such that failures within a given node set can be uniquely localized, and (2) the largest node set within which failures can be uniquely localized under a given bound on the total number of failures. Both measures in (1-2) can be converted into functions of a per-node property, which can be computed efficiently based on the above sufficient/necessary conditions. We demonstrate how measures (1-2) proposed for quantifying failure localization capability can be used to evaluate the impact of various parameters, including topology, number of monitors, and probing mechanisms.

cs.NI↗

arXiv2014

Determination of subject-specific muscle fatigue rates under static fatiguing operations

Cumulative local muscle fatigue may lead to potential musculoskeletal disorder (MSD) risks {\color{red}, and subject-specific muscle fatigability needs to be considered to reduce potential MSD risks.} This study was conducted to determine local muscle fatigue rate at shoulder joint level based on an exponential function derived from a muscle fatigue model. Forty male subjects participated in a fatiguing operation under a static posture with a range of relative force levels (14% - 33%). Remaining maximum muscle strengths were measured after different fatiguing sessions. The time course of strength decline was fitted to the exponential function. Subject-specific fatigue rates of shoulder joint moment strength were determined. Good correspondence ($R^2>0.8$) was found in the regression of the majority (35 out of 40 subjects). Substantial inter-individual variability in fatigue rate was found and discussed.

cs.RO↗

arXiv2012

Human Arm simulation for interactive constrained environment design

During the conceptual and prototype design stage of an industrial product, it is crucial to take assembly/disassembly and maintenance operations in advance. A well-designed system should enable relatively easy access of operating manipulators in the constrained environment and reduce musculoskeletal disorder risks for those manual handling operations. Trajectory planning comes up as an important issue for those assembly and maintenance operations under a constrained environment, since it determines the accessibility and the other ergonomics issues, such as muscle effort and its related fatigue. In this paper, a customer-oriented interactive approach is proposed to partially solve ergonomic related issues encountered during the design stage under a constrained system for the operator's convenience. Based on a single objective optimization method, trajectory planning for different operators could be generated automatically. Meanwhile, a motion capture based method assists the operator to guide the trajectory planning interactively when either a local minimum is encountered within the single objective optimization or the operator prefers guiding the virtual human manually. Besides that, a physical engine is integrated into this approach to provide physically realistic simulation in real time manner, so that collision free path and related dynamic information could be computed to determine further muscle fatigue and accessibility of a product design

cs.RO↗

arXiv2012

Human Muscle Fatigue Model in Dynamic Motions

Human muscle fatigue is considered to be one of the main reasons for Musculoskeletal Disorder (MSD). Recent models have been introduced to define muscle fatigue for static postures. However, the main drawbacks of these models are that the dynamic effect of the human and the external load are not taken into account. In this paper, each human joint is assumed to be controlled by two muscle groups to generate motions such as push/pull. The joint torques are computed using Lagrange's formulation to evaluate the dynamic factors of the muscle fatigue model. An experiment is defined to validate this assumption and the result for one person confirms its feasibility. The evaluation of this model can predict the fatigue and MSD risk in industry production quickly.

cs.RO↗

arXiv2011

Can virtual reality predict body part discomfort and performance of people in realistic world for assembling tasks?

This paper presents our work on relationship of evaluation results between virtual environment (VE) and realistic environment (RE) for assembling tasks. Evaluation results consist of subjective results (BPD and RPE) and objective results (posture and physical performance). Same tasks were performed with same experimental configurations and evaluation results were measured in RE and VE respectively. Then these evaluation results were compared. Slight difference of posture between VE and RE was found but not great difference of effect on people according to conventional ergonomics posture assessment method. Correlation of BPD and performance results between VE and RE are found by linear regression method. Moreover, results of BPD, physical performance, and RPE in VE are higher than that in RE with significant difference. Furthermore, these results indicates that subjects feel more discomfort and fatigue in VE than RE because of additional effort required in VE.

cs.RO↗

arXiv2011

A novel approach for determining fatigue resistances of different muscle groups in static cases

In ergonomics and biomechanics, muscle fatigue models based on maximum endurance time (MET) models are often used to integrate fatigue effect into ergonomic and biomechanical application. However, due to the empirical principle of those MET models, the disadvantages of this method are: 1) the MET models cannot reveal the muscle physiology background very well; 2) there is no general formation for those MET models to predict MET. In this paper, a theoretical MET model is extended from a simple muscle fatigue model with consideration of the external load and maximum voluntary contraction in passive static exertion cases. The universal availability of the extended MET model is analyzed in comparison to 24 existing empirical MET models. Using mathematical regression method, 21 of the 24 MET models have intraclass correlations over 0.9, which means the extended MET model could replace the existing MET models in a general and computationally efficient way. In addition, an important parameter, fatigability (or fatigue resistance) of different muscle groups, could be calculated via the mathematical regression approach. Its mean value and its standard deviation are useful for predicting MET values of a given population during static operations. The possible reasons influencing the fatigue resistance were classified and discussed, and it is still a very challenging work to find out the quantitative relationship between the fatigue resistance and the influencing factors.

cs.RO↗

arXiv2011

A framework of motion capture system based human behaviours simulation for ergonomic analysis

With the increasing of computer capabilities, Computer aided ergonomics (CAE) offers new possibilities to integrate conventional ergonomic knowledge and to develop new methods into the work design process. As mentioned in [1], different approaches have been developed to enhance the efficiency of the ergonomic evaluation. Ergonomic expert systems, ergonomic oriented information systems, numerical models of human, etc. have been implemented in numerical ergonomic software. Until now, there are ergonomic software tools available, such as Jack, Ergoman, Delmia Human, 3DSSPP, and Santos, etc. [2-4]. The main functions of these tools are posture analysis and posture prediction. In the visualization part, Jack and 3DSSPP produce results to visualize virtual human tasks in 3-dimensional, but without realistic physical properties. Nowadays, with the development of computer technology, the simulation of physical world is paid more attention. Physical engines [5] are used more and more in computer game (CG) field. The advantage of physical engine is the nature physical world environment simulation. The purpose of our research is to use the CG technology to create a virtual environment with physical properties for ergonomic analysis of virtual human.

cs.RO↗

arXiv2010

Using virtual human for an interactive customer-oriented constrained environment design

For industrial product design, it is very important to take into account assembly/disassembly and maintenance operations during the conceptual and prototype design stage. For these operations or other similar operations in a constrained environment, trajectory planning is always a critical and difficult issue for evaluating the design or for the users' convenience. In this paper, a customer-oriented approach is proposed to partially solve ergonomic issues encountered during the design stage of a constrained environment. A single objective optimization based method is taken from the literature to generate the trajectory in a constrained environment automatically. A motion capture based method assists to guide the trajectory planning interactively if a local minimum is encountered within the single objective optimization. At last, a multi-objective evaluation method is proposed to evaluate the operations generated by the algorithm

cs.RO↗

arXiv2010

Integrating digital human modeling into virtual environment for ergonomic oriented design

Virtual human simulation integrated into virtual reality applications is mainly used for virtual representation of the user in virtual environment or for interactions between the user and the virtual avatar for cognitive tasks. In this paper, in order to prevent musculoskeletal disorders, the integration of virtual human simulation and VR application is presented to facilitate physical ergonomic evaluation, especially for physical fatigue evaluation of a given population. Immersive working environments are created to avoid expensive physical mock-up in conventional evaluation methods. Peripheral motion capture systems are used to capture natural movements and then to simulate the physical operations in virtual human simulation. Physical aspects of human's movement are then analyzed to determine the effort level of each key joint using inverse kinematics. The physical fatigue level of each joint is further analyzed by integrating a fatigue and recovery model on the basis of physical task parameters. All the process has been realized based on VRHIT platform and a case study is presented to demonstrate the function of the physical fatigue for a given population and its usefulness for worker selection.

cs.RO↗

arXiv2010

A new muscle fatigue and recovery model and its ergonomics application in human simulation

Although automatic techniques have been employed in manufacturing industries to increase productivity and efficiency, there are still lots of manual handling jobs, especially for assembly and maintenance jobs. In these jobs, musculoskeletal disorders (MSDs) are one of the major health problems due to overload and cumulative physical fatigue. With combination of conventional posture analysis techniques, digital human modelling and simulation (DHM) techniques have been developed and commercialized to evaluate the potential physical exposures. However, those ergonomics analysis tools are mainly based on posture analysis techniques, and until now there is still no fatigue index available in the commercial software to evaluate the physical fatigue easily and quickly. In this paper, a new muscle fatigue and recovery model is proposed and extended to evaluate joint fatigue level in manual handling jobs. A special application case is described and analyzed by digital human simulation technique.

cs.RO↗

arXiv2010

Fatigue evaluation in maintenance and assembly operations by digital human simulation

Virtual human techniques have been used a lot in industrial design in order to consider human factors and ergonomics as early as possible. The physical status (the physical capacity of virtual human) has been mostly treated as invariable in the current available human simulation tools, while indeed the physical capacity varies along time in an operation and the change of the physical capacity depends on the history of the work as well. Virtual Human Status is proposed in this paper in order to assess the difficulty of manual handling operations, especially from the physical perspective. The decrease of the physical capacity before and after an operation is used as an index to indicate the work difficulty. The reduction of physical strength is simulated in a theoretical approach on the basis of a fatigue model in which fatigue resistances of different muscle groups were regressed from 24 existing maximum endurance time (MET) models. A framework based on digital human modeling technique is established to realize the comparison of physical status. An assembly case in airplane assembly is simulated and analyzed under the framework. The endurance time and the decrease of the joint moment strengths are simulated. The experimental result in simulated operations under laboratory conditions confirms the feasibility of the theoretical approach.

cs.RO↗

arXiv2010

A Framework for Interactive Work Design based on Digital Work Analysis and Simulation

Due to the flexibility and adaptability of human, manual handling work is still very important in industry, especially for assembly and maintenance work. Well-designed work operation can improve work efficiency and quality; enhance safety, and lower cost. Most traditional methods for work system analysis need physical mock-up and are time consuming. Digital mockup (DMU) and digital human modeling (DHM) techniques have been developed to assist ergonomic design and evaluation for a specific worker population (e.g. 95 percentile); however, the operation adaptability and adjustability for a specific individual are not considered enough. In this study, a new framework based on motion tracking technique and digital human simulation technique is proposed for motion-time analysis of manual operations. A motion tracking system is used to track a worker's operation while he/she is conducting a manual handling work. The motion data is transferred to a simulation computer for real time digital human simulation. The data is also used for motion type recognition and analysis either online or offline for objective work efficiency evaluation and subjective work task evaluation. Methods for automatic motion recognition and analysis are presented. Constraints and limitations of the proposed method are discussed.

cs.RO↗

arXiv2009

Multi-Objective Optimisation Method for Posture Prediction and Analysis with Consideration of Fatigue Effect and its Application Case

Automation technique has been widely used in manufacturing industry, but there are still manual handling operations required in assembly and maintenance work in industry. Inappropriate posture and physical fatigue might result in musculoskeletal disorders (MSDs) in such physical jobs. In ergonomics and occupational biomechanics, virtual human modelling techniques have been employed to design and optimize the manual operations in design stage so as to avoid or decrease potential MSD risks. In these methods, physical fatigue is only considered as minimizing the muscle or joint stress, and the fatigue effect along time for the posture is not considered enough. In this study, based on the existing methods and multiple objective optimisation method (MOO), a new posture prediction and analysis method is proposed for predicting the optimal posture and evaluating the physical fatigue in the manual handling operation. The posture prediction and analysis problem is mathematically described and a special application case is demonstrated for analyzing a drilling assembly operation in European Aeronautic Defence & Space Company (EADS) in this paper.

cs.RO↗

arXiv2009

A new muscle fatigue and recovery model and its ergonomics application in human simulation

cs.RO↗

arXiv2009

Dynamic Muscle Fatigue Evaluation in Virtual Working Environment

Musculoskeletal disorder (MSD) is one of the major health problems in mechanical work especially in manual handling jobs. Muscle fatigue is believed to be the main reason for MSD. Posture analysis techniques have been used to expose MSD risks of the work, but most of the conventional methods are only suitable for static posture analysis. Meanwhile the subjective influences from the inspectors can result differences in the risk assessment. Another disadvantage is that the evaluation has to be taken place in the workshop, so it is impossible to avoid some design defects before data collection in the field environment and it is time consuming. In order to enhance the efficiency of ergonomic MSD risk evaluation and avoid subjective influences, we develop a new muscle fatigue model and a new fatigue index to evaluate the human muscle fatigue during manual handling jobs in this paper. Our new fatigue model is closely related to the muscle load during working procedure so that it can be used to evaluate the dynamic working process. This muscle fatigue model is mathematically validated and it is to be further experimental validated and integrated into a virtual working environment to evaluate the muscle fatigue and predict the MSD risks quickly and objectively.

cs.RO↗

arXiv2008

Framework for Dynamic Evaluation of Muscle Fatigue in Manual Handling Work

Muscle fatigue is defined as the point at which the muscle is no longer able to sustain the required force or work output level. The overexertion of muscle force and muscle fatigue can induce acute pain and chronic pain in human body. When muscle fatigue is accumulated, the functional disability can be resulted as musculoskeletal disorders (MSD). There are several posture exposure analysis methods useful for rating the MSD risks, but they are mainly based on static postures. Even in some fatigue evaluation methods, muscle fatigue evaluation is only available for static postures, but not suitable for dynamic working process. Meanwhile, some existing muscle fatigue models based on physiological models cannot be easily used in industrial ergonomic evaluations. The external dynamic load is definitely the most important factor resulting muscle fatigue, thus we propose a new fatigue model under a framework for evaluating fatigue in dynamic working processes. Under this framework, virtual reality system is taken to generate virtual working environment, which can be interacted with the work with haptic interfaces and optical motion capture system. The motion information and load information are collected and further processed to evaluate the overall work load of the worker based on dynamic muscle fatigue models and other work evaluation criterions and to give new information to characterize the penibility of the task in design process.

cs.RO↗