arXiv subjects

Liberato Manna

Publications and source records attributed to Liberato Manna.

At least 19 recordsLinked to original sources

arXiv2026

Scalable Conformal MoSx Catalyst for Efficient Hydrogen Evolution at Industrial-Level Current Density in Alkaline Electrolyzers

The development of simple and scalable fabrication strategies for cost-effective electrodes is crucial to advance water splitting in alkaline water electrolyzers (AWEs). Here, we present a coating-annealing method to conformally coat a MoSx catalyst layer onto a porous Ni foam (NF) substrate. By controlling the annealing process, the composition of the MoSx layer could be tuned from MoS2 to MoS3 and its catalytic performance for hydrogen evolution reaction (HER) in alkaline media was optimized. The MoS3@NF synthesized by this method achieved industrially relevant HER current densities of 200 mA/cm2 at a low overpotential of 246 mV, maintaining stable operation for over 240 h. The MoS3@NF cathode, combined with a stainless steel anode, enabled an alkaline water electrolyzer (AWE) cell to operate steadily at 1.96 V and 1 A/cm2 for 1000 h. This performance surpasses that of most of the previously reported water electrolyzers employing MoSx-based cathodes. Our work demonstrates the potential of MoS3 (with its abundant edge-sulfur atoms serving as active sites) as a high-performance cathode material for industrial AWEs.

cond-mat.mtrl-sci↗

arXiv2026

Metal Halide Perovskite/Chalcohalide Heterojunctions for the Photoinduced Oxidative Coupling of p-substituted Thiophenols

The introduction of a semiconductor-semiconductor junction is an effective strategy to enhance the photocatalytic performance of perovskite nanocrystal-based systems. Herein, we optimized the synthesis of CsPbX3/Pb4S3X2 (X= Cl, Br, I) perovskites-chalcohalides heterostructures, whose band alignment can be tuned by halide composition. As a proof-of-concept, we evaluated the photooxidative coupling of p-substituted thiophenols at room temperature, under visible-light, air, and without sacrificial electron donor. Notably, CsPbBr3/Pb4S3Br2 achieved up to 94 % selectivity toward disulfide (p-OCH3 thiophenol with a turnover number of 14300) highlighting the crucial role of the type-II heterojunction to promote charge separation and efficient electron delocalization across the junction.

cond-mat.mtrl-sci↗

arXiv2026

Interfacial Reconstructions and Engineering in III-V@II-VI Core-Shell Quantum Dots

In core/shell quantum dots (QDs), the interface between semiconductors of different chemical character largely determines their optoelectronic properties. In III-V/II-VI systems, this boundary involves pronounced chemical and electronic discontinuities that can generate trap states even under complete surface passivation. Using density functional theory on atomistic models of InAs/CdSe QDs, we systematically reconstruct atomic arrangements at the surface and interface to evaluate how local coordination and interfacial dipoles influence the electronic structure. Abrupt interfaces induce charge imbalance and band-gap collapse, whereas introducing an alloyed interlayer that mixes core and shell atoms and vacancies restores energetic alignment and yields delocalized band-edge states, consistent with experimental findings. We also introduce a charge-flow analysis that quantifies charge redistribution across the QD, providing a framework for realistic modeling of interlayer formation and predictive design of defect-free interfaces in core@shell architectures.

cond-mat.mtrl-sci↗

arXiv2026

Deterministic nucleation of nanocrystal superlattices on 2D perovskites for light-funneling heterostructures

Semiconductor heterostructures that combine components with different dimensionality provide an interesting way to manipulate the physical properties of the resulting material. Two-dimensional lead halide perovskites crystallize as flat microcrystals and have efficient in-plane exciton mobility, while perovskite nanocrystals are efficient emitters with a tunable bandgap that can self-assemble into microscopic superlattices. However, combining such intricate architectures into heterostructures has been challenging due to the mismatch in solubility properties and the challenging transfer procedures. Here we realize heterostructures where CsPbBr3 nanocrystal superlattices are deterministically grown along the faces of PEA2PbBr4 two-dimensional layered perovskite microcrystals. The growth can be limited to the lateral faces of the microcrystals and result in core-crown epitaxial heterostructures, or extended to the vertical direction leading to core-shell-like structures. The growth method is simple yet effective and versatile, and promises to be expanded to a large variety of other materials. We demonstrate that these heterostructures can be employed as efficient light-harvesting systems. In fact, energy can be transferred from the two-dimensional microcrystal domain to the superlattices, enabling switching between linear and non-linear carrier recombination regimes by tuning the excitation fluence. Moreover, by exploiting the lifetime shortening of CsPbBr3 nanocrystal emission upon sample cooling, we ensure that energy transfer occurs after the biexcitonic and single-excitonic decays of the nanocrystals, effectively extending the radiative recombination of superlattices.

cond-mat.mtrl-sci↗

arXiv2026

A Nanocrystal Synthesis Derived Approach to Silver Bismuth Iodide Layered Double Perovskites with Aliphatic Amines: (CnH(2n+1)NH3)4AgBiI8

Lead-free iodide double perovskites are an interesting class of materials since they combine a relatively low toxicity (compared to the lead counterpart) with the small bandgap typical of iodide-based perovskite structures. Their reported number is small due to their lower structural stability compared to the chloride and bromide analogues, hence their difficult synthesis. The structural constraints that limit stability, on the other hand, can be much relieved in layered, organic-inorganic perovskites. Following this line of thought, we report here a successful fast precipitation route to iodide layered (CnH(2n+1)NH3)4AgBiI8 (n = 10, 12, and 14) double perovskites that borrow concepts from the synthesis of colloidal nanocrystals. X-ray diffraction studies revealed for these compounds a monoclinic crystal structure containing edge-sharing alternated [AgI6] and [BiI6] octahedra. These materials have experimental band gaps of 2.1 eV, as also corroborated by theoretical calculations. We have also investigated their phase transitions by thermal analysis and temperature-dependent diffraction and found them to be similar to their lead-based layered perovskite counterparts.

cond-mat.mtrl-sci↗

arXiv2026

Synthesis and Structural Analysis of an Emissive Colloidal Argyrodite Nanocrystal: Canfieldite Ag8SnS6

We resolve a phase identification controversy in the Ag-Sn-S material system by unraveling the polymorphic structure of nanocrystals within the argyrodite material family. Argyrodites are a class of superionic materials used in their bulk form for applications in solid-state batteries and thermoelectrics, where their advantageous properties relate to their polymorphism. However, despite their well-studied bulk applications, the limited exploration at the nanoscale has left considerable potential for the discovery of emerging properties due to size effects. Further, phase identification presents a prominent challenge to the study of polymorphs in superionic conductors and related mate-rials. In this work, we synthesize canfieldite-like (Ag8SnS6) nanocrystals to understand their formation and structural behavior at the nanoscale. We observe the emergence of emissive, meta-stable, cluster-like species. Then, high-resolution transmission electron microscopy reveals indistinguishable polymorphs of canfieldite due to identical heavy-atom frameworks. However, using synchrotron X-ray total scattering for pair distribution function analysis, we uncover structural distortions, showing a pseudo-orthorhombic configuration that likely gives rise to the red emission. Further, we investigate the optical properties and structure of Ag8SnS6 nanocrystals upon the addition of Zn2+, the cation of interest in the canfieldite vs. pirquitasite (Ag2ZnSnS4) phase identification controversy. We show that Zn2+ is incorporated in the canfieldite-like structure through the replacement of Ag+, boosting the emission. Our results solve a standing phase identification challenge and uncover fundamental insights for the synthesis and structure of canfieldite nanocrystals, laying the ground for the exploration of other argyrodite materials with emerging properties at the nanoscale.

cond-mat.mtrl-sci↗

arXiv2026

Anti-Thermal Quenching Phosphors based on Metal Halides

Thermal quenching (TQ) generally occurs in phosphors and is ascribed to the activation of non-radiative transitions at elevated temperatures. This effect limits the use of most phosphors in high-power/high-temperature applications, such as outdoor lighting and laser systems. To achieve anti-TQ properties, structural design of phosphors is required. This usually follows two guidelines: (1) increasing lattice rigidity to minimize thermal expansion; (2) converting thermal energy into radiative transitions to compensate for the non-radiative losses. While metal oxides and metal nitrides dominate the field of commercial anti-TQ phosphors, metal halides - despite their inherently soft lattices - have shown remarkable progress as anti-TQ phosphors in recent years. Here, we review the advances in anti-TQ metal halides (covering the time span from 2017, when first reports have appeared, till today) and discuss their mechanisms and applications. We argue that the low synthesis temperatures of metal halides and their high photoluminescence quantum yields (PLQYs) make them promising candidates as anti-TQ phosphors. Furthermore, since the rich optical-physical processes underlying the anti-TQ effect in soft-lattice in metal halides are only now beginning to be unraveled, this creates opportunities for many fundamental investigations.

cond-mat.mtrl-sci↗

arXiv2026

The Predictive Power of Chemical Bonding Analysis in Materials: a Perspective on Optoelectronic Properties

Chemical bonding governs how atoms interact to form compounds, thereby determining their physicochemical properties. Despite being an elusive concept, chemical bonding has led to the development of models and tools to explain and predict the behavior of chemical species. This perspective addresses the adoption of chemical bonding analysis to the study of optoelectronic materials, emphasizing the im-portance of its predictive aspect. After reviewing the evolution of chemical bonding models from the first Lewis formulation to the present day, the perspective discusses material classes and chemical bonding phenomena most relevant for light harvesting and emission. We delve into metal halide perovskites and structurally related materials, given their central role in optoelectronic research. Various aspects of chemical bonding in these materials are surveyed, from the structure-property relationship to the rationalization of their electronic properties through molecular orbital diagrams. Two chemical bonding features are particularly important for optoelectronic materials: the ns2 lone pairs of the cations typically found in these materials (e.g. Pb, Sb, Bi) and the antibonding nature of valence and/or conduction bands. We discuss in depth the models to predict the implications of these two phenomena on optoelectronic properties. We also explore chalcohal-ides, a class of materials whose optoelectronic properties are recently emerging. From the chemical bonding perspective, these materials display intriguing phenomena due to the interplay of various types of chemical bonds. Finally, we discuss our vision on the role of chemical bonding analysis in the future of materials science, including synergies and antitheses with machine learning.

cond-mat.mtrl-sci↗

arXiv2026

Permanent Lattice Compression of Lead-Halide Perovskite for Persistently Enhanced Optoelectronic Properties

Under mild mechanical pressure, halide perovskites show enhanced optoelectronic properties. However, these improvements are reversible upon decompression, and permanent enhancements have yet to be realized. Here, we report antisolvent-assisted solvent acidolysis crystallization that enables us to prepare methylammonium lead bromide single crystals showing intense emission at all four edges under ultraviolet light excitation. We study structural variations, edge-vs-center, in these crystals using micro-X-ray diffraction and find that the enhanced emission at the edges correlates with lattice compression compared to in the central areas. Time-resolved photoluminescence measurements show much longer-lived photogenerated carriers at the compressed edges, with radiative component lifetimes of ca. 1.4 us, 10 times longer than at the central regions. The properties of the edges are exploited to fabricate planar photodetectors exhibiting detectivities of 3x10^13 Jones, compared to 5x10^12 Jones at the central regions. The enhanced lifetimes and detectivities correlate to the reduced trap state densities and the formation of shallower traps at the edges due to lattice compression.

cond-mat.mtrl-sci↗

arXiv2025

Heterostructure Design in Two-Dimensional Perovskites by Sequential Recrystallization

Low-dimensional metal halide perovskites provide exciting opportunities to fabricate new semiconductor materials. Semiconductor technology relies on electronic heterojunctions, and cost-efficient and flexible approaches to realize functional heterostructures are of fundamental importance. Lateral heterostructures define the energy landscape in the plane of the semiconducting lattice in such 2D materials, representing an ideal platform to tailor energy barriers and to control charge carrier flow. Here, we demonstrate a versatile one-pot synthesis to fabricate a large variety of 2D perovskite heterostructures based on different halides and/or metal cations. Exploiting sequential crystallization of different 2D perovskites, and playing with the composition and injection events of the materials, enables the design of diverse heterostructure architectures including multiple heterojunctions. We obtain crystalline quality of the heterojunctions, multicolor emission, and optical coupling between the different heterostructure regions. We foresee that the design freedom of our method will stimulate the development of novel optoelectronic devices where electronic band engineering is crucial.

cond-mat.mtrl-sci↗

arXiv2025

Structure Prediction of Ionic Epitaxial Interfaces with Ogre Demonstrated for Colloidal Heterostructures of Lead Halide Perovskites

Colloidal epitaxial heterostructures are nanoparticles composed of two different materials connected at an interface, which can exhibit properties different from those of their individual components. Combining dissimilar materials offers opportunities to create several functional heterostructures. Yet, assessing structural compatibility (the main prerequisite for epitaxial growth) is challenging when pairing complex materials with different lattice parameters/crystal structures. This complicates both the selection of target heterostructures for synthesis and the assignment of interface models when new heterostructures are obtained. Here, we demonstrate Ogre as a powerful tool to accelerate the design and characterization of colloidal heterostructures. To this end we implemented developments tailored for the efficient prediction of epitaxial interfaces between ionic/polar materials, which encompass most colloidal semiconductors. These include pre-screening candidate models based on charge balance at the interface and using a classical potential for fast energy evaluations, with parameters automatically extracted from the input bulk structures. These developments are validated for CsPbBr3/Pb4S3Br2 heterostructures, where Ogre produces interface models in agreement with density functional theory and experiments. Furthermore, we use Ogre to rationalize the templating effect of CsPbCl3 on the growth of lead sulfochlorides, where perovskite seeds induce the formation of Pb4S3Cl2 rather than Pb3S2Cl2 due to better epitaxial compatibility. Combining Ogre simulations with experimental data enables us to unravel the structure and composition of the hitherto unsolved CsPbBr3/BixPbySz interface and assign a structure to many other reported metal halide/oxide based interfaces. The Ogre package is available on GitHub or via the OgreInterface desktop application, available for Windows, Linux and Mac.

cond-mat.mtrl-sci↗

arXiv2025

Synthesis, Growth Mechanism, and Photocatalytic Properties of Metallic-Bi/Bi13S18Br2 Nano-Bell Heterostructures

We report the synthesis of bell-shaped Bi/Bi13S18Br2 metal/semiconductor heterostructures as a photocatalyst based on non-toxic and Earth-abundant elements. Their unique morphology arises from a multi-step growth process, involving 1) the nucleation of Bi13S18Br2 nanorods, 2) the reduction of a metallic-Bi domain on their surface induced by N,N-didodecylmethylamine, and 3) the heterostructure accretion by a localized reaction at the Bi/Bi13S18Br2 interface promoted by Ostwald ripening. These heterostructures display remarkable stability in polar solvents, remaining almost unaffected by prolonged exposure to isopropanol and water, and exhibit high photocatalytic efficiency for the degradation of organic dyes (i.e., Rhodamine-B and Methylene Blue) under visible-light irradiation, with good recyclability. Additionally, preliminary tests demonstrate CO2 reduction capabilities, which make them promising for both the photocatalytic degradation of pollutants and photo-electro CO2 conversion. The straightforward synthesis process and the use of non-toxic and earth-abundant elements offers significant potential for sustainable energy conversion technologies.

cond-mat.mtrl-sci↗

arXiv2025

Exogenous Metal Cations in the Synthesis of CsPbBr3 Nanocrystals and their Interplay with Tertiary Amines

Current syntheses of CsPbBr3 halide perovskite nanocrystals (NCs) rely on over-stoichiometric amounts of Pb2+ precursors, resulting in unreacted lead ions at the end of the process. In our synthesis scheme of CsPbBr3 NCs we replaced excess Pb2+ with different exogenous metal cations (M) and investigated their effect on the synthesis products. These cations can be divided into two groups: group 1 delivers monodisperse CsPbBr3 cubes capped with oleate species (as for the case when Pb2+ is used in excess) and with photoluminescence quantum yield (PLQY) as high as 90% with some cations (for example with M= In3+); group 2 yields irregularly shaped CsPbBr3 NCs with broad size distributions. In both cases, the addition of a tertiary ammonium cation (didodecylmethyl ammonium, DDMA+) during the synthesis, after the nucleation of the NCs, reshapes the NCs to monodisperse truncated cubes. Such NCs feature a mixed oleate/DDMA+ surface termination with PLQY values up to 90%. For group 1 cations, this happens only if the ammonium cation is directly added as a salt (DDMA-Br) while for group 2 cations this happens even if the corresponding tertiary amine (DDMA) is added, instead of DDMA-Br. This is attributed to the fact that only group 2 cations can facilitate the protonation of DDMA by the excess oleic acid present in the reaction environment. In all cases studied, the incorporation of M cations is marginal and the reshaping of the NCs is only transient: if the reactions are run for a long time the truncated cubes evolve to cubes.

cond-mat.mtrl-sci↗

arXiv2025

Core@Shell AgBr@CsPbBr3 Nanocrystals as Precursors to Hollow Lead Halide Perovskite Nanocubes

We report the synthesis of colloidal core@shell AgBr@CsPbBr3 nanocubes by a one-pot approach, where the nucleation and growth of AgBr nanocrystals occurs rapidly after the injection of chemical precursors. This is immediately followed by the overgrowth of CsPbBr3, delivering AgBr@CsPbBr3 nanocubes of several tens of nanometers in size, with the volume of the AgBr core being only a small fraction of the overall nanocrystal volume. The formation of a core@shell geometry is facilitated by the epitaxial compatibility between AgBr and CsPbBr3 along multiple crystallographic directions. Exchange with Cl-ions leads to Ag@CsPbCl3 nanocubes, whereas exchange with I-ions leads to hollow CsPbI3 nanocubes, due to selective etching of the AgBr (or Ag) core region by the I-ions diffusing in the nanocubes. These hollow CsPbI3 nanocubes can then be converted into hollow CsPbBr3 and CsPbCl3 nanocubes by halide exchange. The optical emission properties of the hollow CsPbX3 (X=Cl, Br, I) nanocubes are in line with those expected from large, non-hollow halide perovskite nanocrystals, indicating that the small hollow region in the cubes has no major influence on their optical properties.

cond-mat.mtrl-sci↗

arXiv2025

Improving the Stability of Colloidal CsPbBr3 Nanocrystals with an Alkylphosphonium Bromide as Surface Ligand Pair

In this study, we synthesised a phosphonium-based ligand, trimethyl(tetradecyl)phosphonium bromide (TTP-Br), and employed it in the post-synthesis surface treatment of Cs-oleate-capped CsPbBr3 NCs. The photoluminescence quantum yield (PLQY) of the NCs increased from 60% to more than 90%, as a consequence of replacing Cs-oleate with TTP-Br ligand pairs. Density functional theory calculations revealed that TTP+ ions bind to the NC surface by occupying Cs+ surface sites and orienting one of their P-CH3 bonds perpendicular to the surface, akin to quaternary ammonium passivation. Importantly, TTP-Br-capped NCs exhibited higher stability in air compared to didodecyldimethylammonium bromide-capped CsPbBr3 NCs (which is considered a benchmark system), retaining 90% of their PLQY after six weeks of air exposure. Light-emitting diodes fabricated with TTP-Br-capped NCs achieved a maximum external quantum efficiency of 17.2 %, demonstrating the potential of phosphonium-based molecules as surface ligands for CsPbBr3 NCs in optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2025

Nanocrystals Heterostructures based on Halide Perovskites and Metal Sulfides

We report the synthesis of nanocrystal heterostructures composed of CsPbCl3 and PbS domains sharing an epitaxial interface. We were able to promote the growth of a PbS domain (in competition with the more commonly observed Pb4S3Cl2 one) on top of the CsPbCl3 domain by employing Mn2$^+$ ions, the latter acting most likely as scavengers of Cl$^-$ ions. Complete suppression of the Pb4S3Cl2 domain growth was then achieved by additionally selecting an appropriate sulfur source (bis(trimethylsilyl)sulfide, which also acted as scavenger of Cl$^-$ ions), and reaction temperature. In the heterostructures, emission from the perovskite domain was quenched, while emission from the PbS domain was observed, pointing to a type-I band alignment, as confirmed by calculations. These heterostructures in turn could be exploited to prepare second-generation heterostructures through selective ion exchange on the individual domains (halide ion exchange on CsPbCl3, cation exchange on PbS). We demonstrate the cases of Cl$^-$ to Br$^-$ and Pb2$^+$ to Cu$^+$ exchanges, which deliver CsPbBr3@PbS and CsPbCl3@Cu2-xS epitaxial heterostructures, respectively.

cond-mat.mtrl-sci↗

arXiv2025

Halide Perovskite-Chalcohalide Nanocrystal Heterostructures as a Platform for the Synthesis and Investigation of the CsPbCl3-CsPbI3 Epitaxial Interface

Halide exchange in lead-based halide perovskites has been studied extensively. While mixed Cl-Br or Br-I alloy compositions can be formed with no miscibility gaps, this is precluded for mixed Cl-I compositions, due to the large difference in Cl and I ionic radii. Here, we exploit perovskite-chalcohalide CsPbCl3-Pb4S3Cl2 heterostructures to study the Cl-I exchange and isolate new types of intermediate structures. The epitaxial interface between the Pb4S3Cl2 chalcohalide and the CsPbCl3 perovskite domain significantly influences the intermediate stages of halide exchange in the perovskite domain, leading to coexisting CsPbCl3 and CsPbI3 domains, thereby delivering segmented CsPbI3-CsPbCl3-Pb4S3Cl2 energetically favorable heterostructures, with partial iodide alloying of the CsPbCl3 domain and at the perovskite-chalcohalide interface. The I:CsPbCl3 domain between CsPbI3 and Pb4S3Cl2 enables a gradual lattice expansion across the heterostructure. This design accommodates interfacial strain, with a 5.6% mismatch at the CsPbCl3-CsPbI3 interface and a 3.4% mismatch at the perovskite-chalcohalide interface. Full halide exchange leads to CsPbI3-Pb4S3Cl2 heterostructures. Both in intermediate and fully exchanged heterostructures, the CsPbI3 domain is emissive. In the intermediate structures, the band alignment between the two perovskite domains is type-I, with carriers photogenerated in the CsPbCl3 domain quickly transferring to the CsPbI3 domain, where they can recombine radiatively.

cond-mat.mtrl-sci↗

arXiv2025

Near-Infrared Light Emitting Metal Halides: Materials, Mechanisms, and Applications

Near-Infrared (NIR) light emitting metal halides are emerging as a new generation of optical materials owing to their appealing features, which include low-cost synthesis, solution processability and adjustable optical properties. NIR emitting perovskite-based light-emitting diodes (LEDs) have reached an external quantum efficiency (EQE) over 20% and a device stability of over 10,000 h. Such results have sparked an interest in exploring new NIR metal halide emitters. In this review, we summarize several different types of NIR-emitting metal halides, including lead/tin bromide/iodide perovskites, lanthanide ions doped/based metal halides, double perovskites, low dimensional hybrid and Bi3+/Sb3+/Cr3+ doped metal halides, and assess their recent advancements. The characteristics and mechanisms of narrow-band or broadband NIR luminescence in all these materials are discussed in detail. We also highlight the various applications of NIR-emitting metal halides and provide an outlook for the field.

cond-mat.mtrl-sci↗