arXiv subjects
Publications and source records attributed to Lidia Galdino.
We demonstrate digital backpropagation-based compensation of fibre nonlinearities in the near-zero dispersion regime of the O-band. Single-step DBP effectively mitigates self-phase modulation, achieving SNR gains of up to 1.6 dB for 50 Gbaud PDM-256QAM transmission over a 2-span 151 km SMF-28 ULL fibre link.
We demonstrate the first SCL-band long-haul transmission using G.654.E-compliant fibre, achieving 100.8 Tb/s (GMI) over 1552 km, despite its 1520 nm cutoff wavelength. Due to the fibre's ultra-low loss and low nonlinearity, the achievable-information-rate with lumped amplification is comparable to that of G.652.D-compliant fibre links with distributed-Raman-amplification.
We demonstrate multipath interference-penalty-free S-band transmission over two G.654.E-compliant fibres with cable cutoff up to 1530 nm. No SNR degradation was observed across various transmission distances and baud rates
Per-channel launch power optimisation in a hybrid-amplified link with optimised pump powers and wavelengths is described. Compared to using the optimum spectrally uniform launch power, an average SNR gain of 0.13 dB is obtained against 0.56 dB for the same system operating with lumped amplifiers only.
A semi-analytical, real-time nonlinear-interference model including ASE noise in hybrid-amplified links is introduced. Combined with particle-swarm optimisation, the capacity of a hybrid-amplified 10.5 THz 117x57 km link was maximised, increasing throughput by 12% versus an EDFAs-only configuration.
Space division multiplexing using multi-core fiber (MCF) is a promising solution to cope with the capacity crunch in standard single-mode fiber based optical communication systems. Nevertheless, the achievable capacity of MCF is limited by inter-core crosstalk (IC-XT). Many existing researches treat IC-XT as a static interference, however, recent research shows that IC-XT varies with time, wavelength and baud rate. This inherent stochastic feature requires a comprehensive characterization of the behaviour of MCF to its application in practical transmission systems and the theoretical understanding of IC-XT phenomenon. In this paper, we experimentally investigate the IC-XT behaviour of an 8-core trench-assisted MCF in a temperature-controlled environment, using popular modulation formats. We compare the measured results with the theoretical prediction to validate the analytical IC-XT models previously developed. Moreover, we explore the effects of the measurement configurations on the IC-XT accuracy and present an analysis on the IC-XT step distribution. Our results indicate that a number of transmission parameters have significant influence on the strength and volatility of IC-XT. Moreover, the averaging time of the power meter and the observation time window can affect the value of the observed IC-XT, the degrees of the effects vary with the type of the source signals.
A closed-form formula for the nonlinear interference estimation of arbitrary modulation formats in ultra-wideband transmission systems is presented. Enabled by the proposed approach, the formula is applied to the entire S+C+L band (20 THz) and validated by numerical simulations with experimentally measured fibre data.
We present the first experimental demonstration of learned time-domain digital back-propagation (DBP), in 64-GBd dual-polarization 64-QAM signal transmission over 1014 km. Performance gains were comparable to those obtained with conventional, higher complexity, frequency-domain DBP.
Transmission of 306x35 GBd, dual polarization, 64-ary geometrically shaped channels over 90x70 km of SMF was demonstrated, achieving a net throughput of 74.38 Tb/s. A combination of hybrid fiber spans and EDFA/Raman amplifiers enabled a continuous gain bandwidth of 10.8 THz.
Hybrid distributed Raman-EDFA amplifiers, with a continuous 91 nm gain bandwidth, are used to enable a record single mode fibre transmission capacity of 120.0 Tbit/s using 312x35 GBd DP-256QAM over 9x70 km spans.
The efficiency of digital nonlinearity compensation (NLC) is analyzed in the presence of noise arising from amplified spontaneous emission noise (ASE) as well as from a non-ideal transceiver subsystem. Its impact on signal-to-noise ratio (SNR) and reach increase is studied with particular emphasis on split NLC, where the digital back-propagation algorithm is divided between transmitter and receiver. An analytical model is presented to compute the SNR's for non-ideal transmission systems with arbitrary split NLC configurations. When signal-signal nonlinearities are compensated, the performance limitation arises from residual signal-noise interactions. These interactions consist of nonlinear beating between the signal and co-propagating ASE and transceiver noise. While transceiver noise-signal beating is usually dominant for short transmission distances, ASE noise-signal beating is dominant for larger transmission distances. It is shown that both regimes behave differently with respect to the optimal NLC split ratio and their respective reach gains. Additionally, simple formulas for the prediction of the optimal NLC split ratio and the reach increase in those two regimes are reported. It is found that split NLC offers negligible gain with respect to conventional digital back-propagation (DBP) for distances less than 1000 km using standard single-mode fibers and a transceiver (back-to-back) SNR of 26 dB, when transmitter and receiver inject the same amount of noise. However, when transmitter and receiver inject an unequal amount of noise, reach gains of 56% on top of DBP are achievable by properly tailoring the split NLC algorithm. The theoretical findings are confirmed by numerical simulations.