arXiv subjects

Lifeng Wang

Publications and source records attributed to Lifeng Wang.

At least 55 records · Page 3Linked to original sources

arXiv2022

Mathematical modelling of transport phenomena in compressible multicomponent flows

The present article proposes a diffuse interface model for compressible multicomponent flows with transport phenomena of mass, momentum and energy (i.e., mass diffusion, viscous dissipation and heat conduction). The model is reduced from the seven-equation Baer-Nuziato type model with asymptotic analysis in the limit of instantaneous mechanical relaxations. The main difference between the present model and the Kapila's five-equation model consists in that different time scales for pressure and velocity relaxations are assumed, the former being much smaller than the latter. Thanks to this assumption, the velocity disequilibrium is retained to model the mass diffusion process. Aided by the diffusion laws, the final model still formally consists of five equations. The proposed model satisfy two desirable properties : (1) it respects the laws of thermodynamics, (2) it is free of the spurious oscillation problem in the vicinity of the diffused interface zone. The mass diffusion, viscous dissipation and heat conduction processes contribute parabolic partial differential equations that are solved with the Chebyshev method of local iterations. Numerical results show that the proposed model maintains pressure, velocity and temperature equilibrium near the diffused interface. Convergence tests demonstrate that the numerical methods achieve second order in space and time. The proposed model and numerical methods are applied to simulate the laser-driven RM instability problem in inertial confinement fusion, good agreement with experimental results are observed.

math.AP↗

arXiv2022

Resolved frustrated tunneling ionization in asymmetrical fast oscillation of above-threshold ionization spectrum

Tunneling ionization is one of the fundamental electron dynamics, which has wide applications in ultrafast physics. When frustrated tunneling ionization (FTI) is considered, the tunneling rate is not equivalent to ionization rate. However, it is hard to resolve the effects of FTI and direct tunneling ionization (DTI) in ionization spectrum experimentally. Here we report the first observation of the asymmetrical fast oscillation in above-threshold ionization (ATI) spectrum of Argon as function of carrier-envelope phase (CEP), to the best of our knowledge. Simulation results identify that in the experimental ATI spectrum, the π/5 oscillation originates from the quantum interference of electrons in FTI, while DTI is responsible for the asymmetry. Our results provide clear evidence to resolve the effects of direct tunneling and FTI in a new physical regime.

physics.optics↗

arXiv2021

Spatial-spectral Terahertz Networks

This paper focuses on the spatial-spectral terahertz (THz) networks, where transmitters equipped with leaky-wave antennas send information to their receivers at the THz frequency bands. As a directional and nearly planar antenna, the leaky-wave antenna allows for information transmissions with narrow beams and high antenna gains. The conventional large antenna arrays are confronted with challenging issues such as scaling limits and path discovery in the THz frequencies. Therefore, this work exploits the potential of leaky-wave antennas in the dense THz networks, to establish low-complexity THz links. By addressing the propagation angle-frequency coupling effects, the transmission rate is analyzed. The results show that the leaky-wave antenna is efficient for achieving the high-speed transmission rate. The co-channel interference management is unnecessary when the THz transmitters with large subchannel bandwidths are not extremely dense. A simple subchannel allocation solution is proposed, which enhances the transmission rate compared with the same number of subchannels with the equal allocation of the frequency band. After subchannel allocation, a low-complexity power allocation method is proposed to improve the energy efficiency.

cs.IT↗

arXiv2021

Graph Neural Networks: A Review of Methods and Applications

Lots of learning tasks require dealing with graph data which contains rich relation information among elements. Modeling physics systems, learning molecular fingerprints, predicting protein interface, and classifying diseases demand a model to learn from graph inputs. In other domains such as learning from non-structural data like texts and images, reasoning on extracted structures (like the dependency trees of sentences and the scene graphs of images) is an important research topic which also needs graph reasoning models. Graph neural networks (GNNs) are neural models that capture the dependence of graphs via message passing between the nodes of graphs. In recent years, variants of GNNs such as graph convolutional network (GCN), graph attention network (GAT), graph recurrent network (GRN) have demonstrated ground-breaking performances on many deep learning tasks. In this survey, we propose a general design pipeline for GNN models and discuss the variants of each component, systematically categorize the applications, and propose four open problems for future research.

cs.LG↗

arXiv2021

A reduced model for compressible viscous heat-conducting multicomponent flows

In the present paper we propose a reduced temperature non-equilibrium model for simulating multicomponent flows with inter-phase heat transfer, diffusion processes (including the viscosity and the heat conduction) and external energy sources. We derive three equivalent formulations for the proposed model. All the three formulations assume velocity and pressure equilibrium across the material interface. These equivalent forms provide different physical perspectives and numerical conveniences. Temperature equilibration and continuity across the material interfaces are achieved with the instantaneous thermal relaxation. Temperature equilibrium is maintained during the heat conduction process. The proposed models are proved to respect the thermodynamical laws. For numerical solution, the model is split into a hyperbolic partial differential equation (PDE) system and parabolic PDE systems. The former is solved with the high-order Godunov finite volume method that ensures the pressure-velocity-temperature (PVT) equilibrium conduction. The parabolic PDEs are solved with both the implicit and the explicit locally iterative method (LIM) based on Chebyshev parameters. Numerical results are presented for several multicomponent flow problems with diffusion processes. Furthermore, we apply the proposed model to simulate the target ablation problem that is of significance to inertial confinement fusion. Comparisons with one-temperature models in literature demonstrate the ability to maintain the PVT property and superior convergence performance of the proposed model in solving multicomponent problems with diffusions.

math.NA↗

arXiv2021

Diffuse interface relaxation model for two-phase compressible flows with diffusion processes

The paper addresses a two-temperature model for simulating compressible two-phase flow taking into account diffusion processes related to the heat conduction and viscosity of the phases. This model is reduced from the two-phase Baer-Nunziato model in the limit of complete velocity relaxation and consists of the phase mass and energy balance equations, the mixture momentum equation, and a transport equation for the volume fraction.Terms describing effects of mechanical relaxation, temperature relaxation, and thermal conduction on volume fraction evolution are derived and demonstrated to be significant for heat conduction problems. The thermal conduction leads to instantaneous thermal relaxation so that the temperature equilibrium is always maintained in the interface region with meeting the entropy relations. A numerical method is developed to solve the model governing equations that ensures the pressure-velocity-temperature (PVT) equilibrium condition in its high-order extension. We solve the hyperbolic part of the governing equations with the Godunov method with the HLLC approximate Riemann solver. The non-linear parabolic part is solved with an efficient Chebyshev explicit iterative method without dealing with large sparse matrices. To verify the model and numerical methods proposed,we demonstrate numerical results of several numerical tests such as the multiphase shock tube problem, the multiphase impact problem, and the planar ablative Rayleigh-Taylor instability problem.

math.NA↗

arXiv2020

V2I-Based Platooning Design with Delay Awareness

This paper studies the vehicle platooning system based on vehicle-to-infrastructure (V2I) communication, where all the vehicles in the platoon upload their driving state information to the roadside unit (RSU), and RSU makes the platoon control decisions with the assistance of edge computing. By addressing the delay concern, a platoon control approach is proposed to achieve plant stability and string stability. The effects of the time headway, communication and edge computing delays on the stability are quantified. The velocity and size of the stable platoon are calculated, which show the impacts of the radio parameters such as massive MIMO antennas and frequency band on the platoon configuration. The handover performance between RSUs in the V2I-based platooning system is quantified by considering the effects of the RSU's coverage and platoon size, which demonstrates that the velocity of a stable platoon should be appropriately chosen, in order to meet the V2I's Quality-of-Service and handover constraints.

cs.MA↗

arXiv2020

Hybrid-drive pressure suppressing implosion instabilities and offering nonstagnation hotspot ignition with low convergence ratio for high-gain inertial fusion

In laser-drive ICF, hybrid drive (HD) combined direct drive (DD) and indirect drive (ID) offers a smoothed HD pressure $P_{HD}$, far higher than the ablation pressure in ID and DD, to suppress hydrodynamic instabilities. In this letter, simulations of a new robust HD ignition target show that maximal HD pressure as high as $P_{HD} \sim$ 650 Mbar driven by a novel "bulldozer" effect is achieved, resulting in nonstagnation hotspot ignition at the convergence ratio $C_r \sim $23, and finally, fusion energy gain $\sim$ 10 in total laser energy = 1.42 MJ. Two-dimensional simulations have confirmed that hydrodynamic instabilities are suppressed. A well-fitted scale of maximal HD pressure $P_{HD}$ (Mbar)= $BE_{DD}^{1/4} T_r$ is found from simulations of different targets and laser energies as long as $T_r> 160$ eV, where B is the constant depending on ablator materials, $E_{DD}$ in kJ is DD laser energy and $T_r$ in 100 eV is radiation temperature depending on ID laser energy $E_{ID}$. $P_{HD}\geq$ 450 Mbar is requested for hotspot ignition. This scale from "bulldozer" effect is also available as $E_{DD}$ is reduced to kJ. Experiments have verified $P_{HD}$ about 3.5 times radiation ablation pressure for CH ablator using $E_{ID}=43$ kJ ($T_r \simeq$200 eV) and $E_{DD}$=3.6 kJ, also shown that both backscattering fraction and hot-electron energy fraction for DD laser intensity $\sim 1.8 \times 10^{15} {\rm w\cdot cm^{-2}}$ are about a third of the traditional DD laser-plasma interaction

physics.plasm-ph↗

arXiv2020

Multilayer InSe-Te van der Waals heterostructures with ultrahigh rectification ratio and ultrasensitive photoresponse

Multilayer van der Waals (vdWs) semiconductors have great promising application in high-performance optoelectronic devices. However, the photoconductive photodetectors based on layered semiconductors often suffer from large dark current and high external driven bias voltage. Here, we report a vertical van der Waals heterostructures (vdWHs) consisting of multilayer indium selenide (InSe) and tellurium (Te). The multilayer InSe-Te vdWHs device shows a record high forward rectification ratio greater than 107 at room temperature. Furthermore, an ultrasensitive and broadband photoresponse photodetector is achieved by the vdWHs device with an ultrahigh photo/dark current ratio over 104, a high detectivity of 1013, and a comparable responsivity of 0.45 A/W under visible light illumination with weak incident power. Moreover, the vdWHs device has a photovoltaic effect and can function as a self-powered photodetector (SPPD). The SPPD is also ultrasensitive to the broadband spectra ranging from 300 nm to 1000 nm and is capable of detecting weak light signals. This work offers an opportunity to develop next-generation electronic and optoelectronic devices based on multilayer vdWs structures.

physics.app-ph↗

arXiv2019

Edge and Central Cloud Computing: A Perfect Pairing for High Energy Efficiency and Low-latency

In this paper, we study the coexistence and synergy between edge and central cloud computing in a heterogeneous cellular network (HetNet), which contains a multi-antenna macro base station (MBS), multiple multi-antenna small base stations (SBSs) and multiple single-antenna user equipment (UEs). The SBSs are empowered by edge clouds offering limited computing services for UEs, whereas the MBS provides high-performance central cloud computing services to UEs via a restricted multiple-input multiple-output (MIMO) backhaul to their associated SBSs. With processing latency constraints at the central and edge networks, we aim to minimize the system energy consumption used for task offloading and computation. The problem is formulated by jointly optimizing the cloud selection, the UEs' transmit powers, the SBSs' receive beamformers, and the SBSs' transmit covariance matrices, which is {a mixed-integer and non-convex optimization problem}. Based on methods such as decomposition approach and successive pseudoconvex approach, a tractable solution is proposed via an iterative algorithm. The simulation results show that our proposed solution can achieve great performance gain over conventional schemes using edge or central cloud alone. Also, with large-scale antennas at the MBS, the massive MIMO backhaul can significantly reduce the complexity of the proposed algorithm and obtain even better performance.

cs.NI↗

arXiv2019

Multi-microjoule GaSe-based mid-infrared optical parametric amplifier with an ultra-broad idler spectrum covering 4.2-16 μm

We report a multi-microjoule, ultra-broadband mid-infrared optical parametric amplifier based on a GaSe nonlinear crystal pumped at ~2 μm. The generated idler pulse has a flat spectrum spanning from 4.5 to 13.3 μm at -3 dB and 4.2 to 16 μm in the full spectral range, with a central wavelength of 8.8 μm. The proposed scheme supports a sub-cycle Fourier-transform-limited pulse width. A (2+1)-dimensional numerical simulation is employed to reproduce the obtained idler spectrum. To our best knowledge, this is the broadest -3 dB spectrum ever obtained by optical parametric amplifiers in this spectral region. The idler pulse energy is ~3.4 μJ with a conversion efficiency of ~2% from the ~2 μm pump to the idler pulse.

physics.optics↗

arXiv2019

GEAR: Graph-based Evidence Aggregating and Reasoning for Fact Verification

Fact verification (FV) is a challenging task which requires to retrieve relevant evidence from plain text and use the evidence to verify given claims. Many claims require to simultaneously integrate and reason over several pieces of evidence for verification. However, previous work employs simple models to extract information from evidence without letting evidence communicate with each other, e.g., merely concatenate the evidence for processing. Therefore, these methods are unable to grasp sufficient relational and logical information among the evidence. To alleviate this issue, we propose a graph-based evidence aggregating and reasoning (GEAR) framework which enables information to transfer on a fully-connected evidence graph and then utilizes different aggregators to collect multi-evidence information. We further employ BERT, an effective pre-trained language representation model, to improve the performance. Experimental results on a large-scale benchmark dataset FEVER have demonstrated that GEAR could leverage multi-evidence information for FV and thus achieves the promising result with a test FEVER score of 67.10%. Our code is available at https://github.com/thunlp/GEAR.

cs.CL↗

arXiv2019

3D metamaterial with stiffness and Poisson's ratio approaching negative infinity

We report a three-dimensional mechanical metamaterial that simultaneously possesses negative stiffness, negative bulk modulus, and negative Poisson's ratio. This metamaterial is a periodic arrangement of binder-shell elements. Under compression, the spherical shells dent inwards which cause the material to contract in the lateral directions. At larger deformations, snap through instability occurs and the material exhibits negative incremental stiffness. Interestingly, both incremental stiffness and incremental Poisson's ratio approach negative infinity (under displacement control) when snap-back is observed. We further showed that the multi-negative index metamaterial satisfies the strong ellipticity condition, therefore, a block of the metamaterial with many unit cells is stable under displacement constraint.

cond-mat.mtrl-sci↗

arXiv2018

Energy and Latency Control for Edge Computing in Dense V2X Networks

This study focuses on edge computing in dense millimeter wave vehicle-to-everything (V2X) networks. A control problem is formulated to minimize the energy consumption under delay constraint resulting from vehicle mobility. A tractable algorithm is proposed to solve this problem by optimizing the offloaded computing tasks and transmit power of vehicles and road side units. The proposed dynamic solution can well coordinate the interference without requiring global channel state information, and makes a tradeoff between energy consumption and task computing latency.

cs.NI↗

arXiv2018

Edge Caching in Dense Heterogeneous Cellular Networks with Massive MIMO Aided Self-backhaul

This paper focuses on edge caching in dense heterogeneous cellular networks (HetNets), in which small base stations (SBSs) with limited cache size store the popular contents, and massive multiple-input multiple-output (MIMO) aided macro base stations provide wireless self-backhaul when SBSs require the non-cached contents. Our aim is to address the effects of cell load and hit probability on the successful content delivery (SCD), and present the minimum required base station density for avoiding the access overload in an arbitrary small cell and backhaul overload in an arbitrary macrocell. The massive MIMO backhaul achievable rate without downlink channel estimation is derived to calculate the backhaul time, and the latency is also evaluated in such networks. The analytical results confirm that hit probability needs to be appropriately selected, in order to achieve SCD. The interplay between cache size and SCD is explicitly quantified. It is theoretically demonstrated that when non-cached contents are requested, the average delay of the non-cached content delivery could be comparable to the cached content delivery with the help of massive MIMO aided self-backhaul, if the average access rate of cached content delivery is lower than that of self-backhauled content delivery. Simulation results are presented to validate our analysis.

cs.NI↗

arXiv2018

Content Placement in Cache-Enabled Sub-6 GHz and Millimeter-Wave Multi-antenna Dense Small Cell Networks

This paper studies the performance of cache-enabled dense small cell networks consisting of multi-antenna sub-6 GHz and millimeter-wave base stations. Different from the existing works which only consider a single antenna at each base station, the optimal content placement is unknown when the base stations have multiple antennas. We first derive the successful content delivery probability by accounting for the key channel features at sub-6 GHz and mmWave frequencies. The maximization of the successful content delivery probability is a challenging problem. To tackle it, we first propose a constrained cross-entropy algorithm which achieves the near-optimal solution with moderate complexity. We then develop another simple yet effective heuristic probabilistic content placement scheme, termed two-stair algorithm, which strikes a balance between caching the most popular contents and achieving content diversity. Numerical results demonstrate the superior performance of the constrained cross-entropy method and that the two-stair algorithm yields significantly better performance than only caching the most popular contents. The comparisons between the sub-6 GHz and mmWave systems reveal an interesting tradeoff between caching capacity and density for the mmWave system to achieve similar performance as the sub-6 GHz system.

cs.NI↗

arXiv2017

A New Look at Physical Layer Security, Caching, and Wireless Energy Harvesting for Heterogeneous Ultra-dense Networks

Heterogeneous ultra-dense networks enable ultra-high data rates and ultra-low latency through the use of dense sub-6 GHz and millimeter wave (mmWave) small cells with different antenna configurations. Existing work has widely studied spectral and energy efficiency in such networks and shown that high spectral and energy efficiency can be achieved. This article investigates the benefits of heterogeneous ultra-dense network architecture from the perspectives of three promising technologies, i.e., physical layer security, caching, and wireless energy harvesting, and provides enthusiastic outlook towards application of these technologies in heterogeneous ultra-dense networks. Based on the rationale of each technology, opportunities and challenges are identified to advance the research in this emerging network.

cs.NI↗

arXiv2017

Spectral and Energy Efficiency of Uplink D2D Underlaid Massive MIMO Cellular Networks

One of key 5G scenarios is that device-to-device (D2D) and massive multiple-input multiple-output (MIMO) will be co-existed. However, interference in the uplink D2D underlaid massive MIMO cellular networks needs to be coordinated, due to the vast cellular and D2D transmissions. To this end, this paper introduces a spatially dynamic power control solution for mitigating the cellular-to-D2D and D2D-to-cellular interference. In particular, the proposed D2D power control policy is rather flexible including the special cases of no D2D links or using maximum transmit power. Under the considered power control, an analytical approach is developed to evaluate the spectral efficiency (SE) and energy efficiency (EE) in such networks. Thus, the exact expressions of SE for a cellular user or D2D transmitter are derived, which quantify the impacts of key system parameters such as massive MIMO antennas and D2D density. Moreover, the D2D scale properties are obtained, which provide the sufficient conditions for achieving the anticipated SE. Numerical results corroborate our analysis and show that the proposed power control solution can efficiently mitigate interference between the cellular and D2D tier. The results demonstrate that there exists the optimal D2D density for maximizing the area SE of D2D tier. In addition, the achievable EE of a cellular user can be comparable to that of a D2D user.

cs.IT↗