arXiv subjects

Lihao Chen

Publications and source records attributed to Lihao Chen.

6 recordsLinked to original sources

arXiv2026

HarmoCore: Functional Latent Diffusion for Sparse Reconstruction of Oscillatory Wave Fields

Reconstructing oscillatory wave fields from scattered sensors is a severely underdetermined inverse problem. Beyond the challenges of general physical-field reconstruction, wave responses are complex-valued, frequency-sensitive, and highly oscillatory, while costly simulation and sensing often leave only extreme-sparse observations. Existing low-rank, operator, and diffusion approaches are largely designed for real-valued, smoother fields; dense pixel-space diffusion is particularly inefficient for oscillatory complex fields and difficult to scale to 3D. We propose HarmoCore, which places a generative prior in a compact, continuous, and structured wave-field latent. HarmoCore represents joint real--imaginary channels with Functional Tucker cores over shared continuous spatial bases, learns a frequency-conditioned core diffusion prior, and performs Diffusion Posterior Sampling directly in core space. At fixed sensor coordinates, the multilinear decoder induces an explicit likelihood guidance operator, avoiding dense pixel-space correction. Optional target-equation residual guidance further promotes physical consistency. Experiments on 2D Helmholtz, 2D synthetic wave fields, and 3D Helmholtz show substantial gains under 1%--2% sensing while remaining practical in three dimensions.

cs.LG↗

arXiv2026

TRACE: Retrospective Streaming Generation of Physical Fields under Sparse Structured Sensing

Reconstructing continuous physical fields from sparse measurements is central to scientific monitoring, inverse modeling, and digital-twin construction. Generative reconstruction has recently emerged as a promising paradigm for this task by learning data-driven physical priors that complete plausible full fields from limited observations. However, existing methods largely assume fixed, batch conditioning, whereas real sensing systems often produce structured streams: probes scan local regions, instruments observe moving fields of view, and communication constraints may leave entire frames missing. We propose TRACE, a retrospective streaming generative reconstruction framework for physical fields under structured sensing. TRACE performs approximate Bayesian inference in a learned continuous-coordinate latent space, converting sparse off-grid measurements into generative latent evidence, fusing it with a state-space temporal prior through Kalman-style filtering, and refining under-observed past frames via retrospective smoothing. Experiments on active matter, ocean sound-speed fields, and supernova simulations show that TRACE matches or surpasses frame-wise generative reconstructors, offline spatiotemporal methods, and streaming data-assimilation baselines in reconstruction quality under temporally sparse and spatially localized sensing protocols.

stat.ML↗

arXiv2026

CARE: Class-Adaptive Expert Consensus for Reliable Learning with Long-Tailed Noisy Labels

Learning from real-world data is frequently hindered by the compound challenge of long-tailed class distributions and noisy annotations. Existing methods partially address these issues but typically ignore the non-uniform impact of label noise across classes, resulting in ineffective correction for tail classes and over-regularization for head classes. To address this issue, we propose Class-Adaptive Rectification with Experts (CARE), a parameter-efficient framework that leverages three complementary supervision sources from vision-language models (VLM): observed noisy labels, VLM text embeddings, and visual features. CARE introduces a class-adaptive expert consensus mechanism that enforces stricter agreement for tail classes and more permissive agreement for head classes based on class frequency. By aggregating high-confidence predictions across these sources, CARE filters unreliable signals and recalibrates class distributions, yielding more reliable rectification under long-tailed distributions. Extensive experiments on both synthetic and real-world benchmarks demonstrate that CARE consistently outperforms state-of-the-art methods, achieving up to 3.0\% performance gains. The source code is available at https://github.com/qwq123-study/CARE.

cs.CV↗

arXiv2025

Initial performance results of the JUNO detector

The Jiangmen Underground Neutrino Observatory (JUNO) started physics data taking on 26 August 2025. JUNO consists of a 20-kton liquid scintillator central detector, surrounded by a 35 kton water pool serving as a Cherenkov veto, and almost 1000 m$^2$ of plastic scintillator veto on top. The detector is located in a shallow underground laboratory with an overburden of 1800 m.w.e. This paper presents the performance results of the detector, extensively studied during the commissioning of the water phase, the subsequent liquid scintillator filling phase, and the first physics runs. The liquid scintillator achieved an attenuation length of 20.6 m at 430 nm, while the high coverage PMT system and scintillator together yielded about 1785 photoelectrons per MeV of energy deposit at the detector centre, measured using the 2.223 MeV $\gamma$ from neutron captures on hydrogen with an Am-C calibration source. The reconstructed energy resolution is 3.4% for two 0.511 MeV $\gamma$ at the detector centre and 2.9% for the 0.93 MeV quenched Po-214 alpha decays from natural radioactive sources. The energy nonlinearity is calibrated to better than 1%. Intrinsic contaminations of U-238 and Th-232 in the liquid scintillator are below 10$^{-16}$ g/g, assuming secular equilibrium. The water Cherenkov detector achieves a muon detection efficiency better than 99.9% for muons traversing the liquid scintillator volume. During the initial science runs, the data acquisition duty cycle exceeded 97.8%, demonstrating the excellent stability and readiness of JUNO for high-precision neutrino physics.

hep-ex↗

arXiv2025

First measurement of reactor neutrino oscillations at JUNO

Neutrino oscillations, a quantum effect manifesting at macroscopic scales, are governed by lepton flavor mixing angles and neutrino mass-squared differences that are fundamental parameters of particle physics, representing phenomena beyond the Standard Model. Precision measurements of these parameters are essential for testing the completeness of the three-flavor framework, determining the mass ordering of neutrinos, and probing possible new physics. The Jiangmen Underground Neutrino Observatory (JUNO) is a 20 kton liquid-scintillator detector located 52.5 km from multiple reactor cores, designed to resolve the interference pattern of reactor neutrinos with sub-percent precision. Here we report, using the first 59.1 days of data collected since detector completion in August 2025, the first simultaneous high-precision determination of two neutrino oscillation parameters, $\sin^2 \theta_{12} = 0.3092\,\pm\,0.0087$ and $\Delta m^2_{21} = (7.50\,\pm\,0.12)\times10^{-5}\;{\rm eV}^2$ for the normal mass ordering scenario, improving the precision by a factor of 1.6 relative to the combination of all previous measurements. These results advance the basic understanding of neutrinos, validate the detector's design, and confirm JUNO's readiness for its primary goal of resolving the neutrino mass ordering with a larger dataset. The rapid achievement with a short exposure highlights JUNO's potential to push the frontiers of precision neutrino physics and paves the way for its broad scientific program.

hep-ex↗

arXiv2025

Adaptive Point-Prompt Tuning: Fine-Tuning Heterogeneous Foundation Models for 3D Point Cloud Analysis

Parameter-efficient fine-tuning strategies for foundation models in 1D textual and 2D visual analysis have demonstrated remarkable efficacy. However, due to the scarcity of point cloud data, pre-training large 3D models remains a challenging task. While many efforts have been made to apply pre-trained visual models to 3D domains through "high-to-low" mapping, these approaches often lead to the loss of spatial geometries and lack a generalizable framework for adapting any modality to 3D. This paper, therefore, attempts to directly leverage point features to calibrate the heterogeneous foundation model of any modality for 3D point cloud analysis. Specifically, we propose the Adaptive Point-Prompt Tuning (APPT) method, which fine-tunes pre-trained models with a modest number of parameters, enabling direct point cloud processing without heterogeneous mappings. We convert raw point clouds into point embeddings by aggregating local geometry to capture spatial features followed by linear layers to ensure seamless utilization of frozen pre-trained models. Given the inherent disorder of point clouds, in contrast to the structured nature of images and language, we employ a permutation-invariant feature to capture the relative positions of point embeddings, thereby obtaining point tokens enriched with location information to optimize self-attention mechanisms. To calibrate self-attention across source domains of any modality to 3D and reduce computational overhead, we introduce a prompt generator that shares weights with the point embedding module, dynamically producing point-prompts without adding additional parameters. These prompts are then concatenated into a frozen foundation model, providing rich global structural information and compensating for the lack of structural context in the heterogeneous data.

cs.CV↗