arXiv subjects
Publications and source records attributed to Lilin Yi.
We propose an AI Agent tailored for link power management in multi-band systems. In S+C+L band span-level study, the agent efficiently solves various optimization objectives. In network-wide evaluation, it delivers 689.0 Tbps gain in total allocated traffic with merely 303 average interactions per power profile.
In this paper, the quasi-constant modulus (QCM) property is analyzed and leveraged in the design of nonlinearity-tolerant four-dimensional (4D) modulation formats. Accordingly, we propose a family of QCM-based quadrature amplitude modulation (QCM-QAM) constellations with high spectral efficiencies (SEs) of 9, 11, and 13 bit/4D-sym, respectively. The quasi-constant modulus design theoretically enhances tolerance to fiber nonlinearities. Meanwhile, QCM-QAM is evaluated in an unrepeatered wavelength-division multiplexing (WDM) system over both standard single-mode fiber (SSMF) and non-zero dispersion-shifted fiber (NZDSF). Across all SEs, QCM-QAM demonstrates robust nonlinear tolerance in both SSMF and NZDSF. This is evidenced by a consistent shift of the optimal launch power toward higher values and a significant improvement in effective signal-to-noise ratio (SNR). QCM-QAM also delivers generalized mutual information (GMI) gains of 0.22, 0.09, and 0.21 bit/4D-sym in SSMF, and 0.24, 0.10, and 0.22 bit/4D-sym, in NZDSF at the optimal transmission power, corresponding to the SEs of 9, 11, and 13 bit/4D-sym. Furthermore, QCM-QAM achieves transmission reach extensions of 1.6%, 0.9%, and 1.7% in SSMF, and 1.7%, 1.5%, and 1.8% in NZDSF, respectively, for the three SE levels.
Fast and accurate waveform simulation is critical for understanding fiber channel characteristics, developing digital signal processing (DSP) technologies, optimizing optical network configurations, and advancing the optical fiber transmission system towards wideband. Deep learning (DL) has emerged as a powerful tool for waveform modeling, offering high accuracy and low complexity compared to traditional split-step Fourier method (SSFM), due to its strong nonlinear fitting capabilities and efficient parallel computation. However, most DL methods are designed for few-channel and low-rate WDM systems, leaving their scalability to wideband systems uncertain. Moreover, the lack of a standardized accuracy evaluation method and the inconsistent results between waveform errors and transmission performance errors, hinders fair comparisons of various DL schemes. In this paper, we introduce a DSP-assisted accuracy evaluation method integrated with nonlinear DSP, providing a fair benchmark for evaluating the accuracy of DL models. Using this method, we conduct a comprehensive comparison of DL schemes, ranging from simple configurations to more complex wideband setups. The feature decoupled distributed method combining with bidirectional long short-term memory achieves the better performance compared to other DL schemes. Furthermore, in scenarios with more-channel and higher-rate, the performance advantages of FDD-BiLSTM will be further improved. However, as the number of channels and symbol rates increase, the performance of FDD-BiLSTM still gradually deteriorate. We analyze these challenges from three perspectives: the more intricate linear and nonlinear effects, the higher sampling rate required for SSFM. To address these challenges, we discuss potential solutions from two aspects: incorporating more prior physical knowledge and optimizing the structure of DL models.
We demonstrate the first cross-domain cross-layer level-4 autonomous optical network via a multi-AI-agent system. Field trials show ~98% task completion rate across the distributed AI training lifecycle-3.2x higher than single agents using state-of-the-art LLMs.
In this paper, we investigate and assess the performance of intra-channel nonlinearity compensation (IC-NLC) in long-haul coherent optical transmission systems with a symbol rate of 200 GBaud and beyond. We first evaluate the potential gain of ideal IC-NLC in 4 THz systems by estimating the proportion of self-channel interference (SCI) using the split-step Fourier method (SSFM) based simulation with either lumped amplification or distributed amplification. As the symbol rate increases to 300 GBaud, the SCI proportion exceeds 65%. On the other hand, the non-deterministic polarization mode dispersion (PMD) will impact the effectiveness of IC-NLC, especially for ultra-high symbol rate systems. Therefore, we investigate the power spectral density of the residual nonlinear noise after ideal IC-NLC in the presence of PMD. The results indicate that the gain of ideal digital backpropagation (IDBP) decreases by 3.85 dB in 300 GBaud erbium-doped fiber amplifier (EDFA)-amplified links with a PMD parameter of 0.05 ps/km1/2, and 5.09 dB in distributed Raman amplifier (DRA)-amplified links. Finally, we evaluate the potential gains of practical IC-NLC in C-band wavelength-division multiplexing (WDM) systems by employing the low-pass-filter assisted digital backpropagation (LDBP). As the symbol rate increases from 100 GBaud to 300 GBaud, the gain of 20-step-per-span (20-stps) LDBP increases from 0.53 dB to 0.87 dB for EDFA-amplified links, and from 0.89 dB to 1.30 dB for DRA-amplified links. Our quantitative results show that for 200 GBaud and beyond systems, there is a sizable gain to achieve by compensating for intra-channel nonlinearity even with a large non-deterministic PMD.
Photonic reservoir computer (PRC) is a kind of real-time and adaptive recurrent neural network, where only weights in the readout layer require training. PRC is a promising tool to deal with the crucial issue of nonlinear equalization in optical fiber communications. Here we theoretically show a deep PRC for the nonlinear equalization of coherent signals with the format of 16- level quadrature amplitude modulation (16-QAM). The deep PRC consists of cascading injection-locked Fabry-Perot lasers with optical feedback. Both the in-phase component and the quadrature component of the 16-QAM signals are simultaneously injected into the deep PRC in parallel, based on the wavelength multiplexing of Fabry-Perot lasers. It is demonstrated that the deep PRC exhibits strong capability for the nonlinearity compensation of coherent signals. The Q factor is improved by more than 1 dB for 16-QAM signals with launch powers above 10 dBm, associated with a bit rate of 240 Gbps and a transmission distance of 50 km.
We propose a novel input refinement methodology incorporating sensitivity analysis and memory-aware weighting for jointly refining numerous diverse inputs. Field trials show ~2.5 dB and ~2.3 dB improvements in Q-factor and power estimation, respectively.
We utilize the Feature Decoupling Distributed (FDD) method to enhance the capability of deep learning to fit the Nonlinear Schrodinger Equation (NLSE), significantly reducing the NLSE loss compared to non decoupling model.
We propose and experimentally validate a joint estimation method for chromatic dispersion and time-frequency offset based on the fractional Fourier transform, which reduces computational complexity by more than 50% while keeping estimation accuracy.
We design and demonstrate the first field trial of LLM-powered AI Agent for ADON. Three operation modes of the Agent are proposed for network lifecycle management. The Agent efficiently processes wavelength add/drop and soft/hard failures, and achieves comparable performance to human-designed algorithms for power optimization.
Coherent optics has demonstrated significant potential as a viable solution for achieving 100 Gb/s and higher speeds in single-wavelength passive optical networks (PON). However, upstream burst-mode coherent detection is a major challenge when adopting coherent optics in access networks. To accelerate digital signal processing (DSP) convergence with a minimal preamble length, we propose a novel burst-mode preamble design based on a constant amplitude zero auto-correlation sequence. This design facilitates comprehensive estimation of linear channel effects in the frequency domain, including polarization state rotation, differential group delay, chromatic dispersion, and polarization-dependent loss, providing overall system response information for channel equalization pre-convergence. Additionally, this preamble utilizes the same training unit to jointly achieve three key DSP functions: frame synchronization, frequency offset estimation, and channel estimation. This integration contributes to a significant reduction in the preamble length. The feasibility of the proposed preamble with a length of 272 symbols and corresponding DSP was experimentally verified in a 15 Gbaud coherent system using dual-polarization 16 quadrature amplitude modulation. The experimental results based on this scheme showed a superior performance of the convergence acceleration.
We propose a heuristic-based optimization scheme for reliable optical amplifier reconfiguration process in ADON. In the experiment on a commercial testbed, the scheme prevents a 1.0-dB Q-factor degradation and outperforms 98.5% random solutions.
We propose a n input parameter refinement scheme for the physics-based Raman amplifier model. Experiments over C+L band are conducted. Results show the scheme can lower the physical model's maximum estimation error by 2.13 dB.
To enable intelligent and self-driving optical networks, high-accuracy physical layer models are required. The dynamic wavelength-dependent gain effects of non-constant-pump erbium-doped fiber amplifiers (EDFAs) remain a crucial problem in terms of modeling, as it determines optical-to-signal noise ratio as well as the magnitude of fiber nonlinearities. Black-box data-driven models have been widely studied, but it requires a large size of data for training and suffers from poor generalizability. In this paper, we derive the gain spectra of EDFAs as a simple univariable linear function, and then based on it we propose a grey-box EDFA gain modeling scheme. Experimental results show that for both automatic gain control (AGC) and automatic power control (APC) EDFAs, our model built with 8 data samples can achieve better performance than the neural network (NN) based model built with 900 data samples, which means the required data size for modeling can be reduced by at least two orders of magnitude. Moreover, in the experiment the proposed model demonstrates superior generalizability to unseen scenarios since it is based on the underlying physics of EDFAs. The results indicate that building a customized digital twin of each EDFA in optical networks become feasible, which is essential especially for next generation multi-band network operations.
We propose a multicarrier modulation-based digital radio-over-fibre system achieving unequal bit protection by bit and power allocation for subcarriers. A theoretical SNR gain of 16.1 dB is obtained in the AWGN channel and the simulation results show a 13.5 dB gain in the bandwidth-limited case.
As an imperative method of investigating the internal mechanism of femtosecond lasers, traditional femtosecond laser modeling relies on the split-step Fourier method (SSFM) to iteratively resolve the nonlinear Schrodinger equation suffering from the large computation complexity. To realize inverse design and optimization of femtosecond lasers, numerous simulations of mode-locked fiber lasers with different cavity settings are required further highlighting the time-consuming problem induced by the large computation complexity. Here, a recurrent neural network is proposed to realize fast and accurate femtosecond mode-locked fiber laser modeling for the first time. The generalization over different cavity settings is achieved via our proposed prior information feeding method. With the acceleration of GPU, the mean time of the artificial intelligence (AI) model inferring 500 roundtrips is less than 0.1 s. Even on an identical CPU-based hardware platform, the AI model is still 6 times faster than the SSFM method. The proposed AI-enabled method is promising to become a standard approach to femtosecond laser modeling.
Based on the physical features of Raman amplification, we propose a three-step modelling scheme based on neural networks (NN) and linear regression. Higher accuracy, less data requirements and lower computational complexity are demonstrated through simulations compared with the pure NN-based method.
We propose a physics-informed EDFA gain model based on the active learning method. Experimental results show that the proposed modelling method can reach a higher optimal accuracy and reduce ~90% training data to achieve the same performance compared with the conventional method.