arXiv subjects

Liming Shu

Publications and source records attributed to Liming Shu.

5 recordsLinked to original sources

arXiv2026

Wearable Multimodal Human-Machine Interface for Integrated Hand Intentions Decoding in Dynamic Teleoperation

Under ubiquitous teleoperation environments with optically challenging conditions, an interface for tele-operated grasping that combines wearability with precise decoding of hand intentions (hand pose, gestures, and grasping force) is essential. Yet, existing interfaces often fall short in meeting these demands, compromising either the diversity of multiple intentions decoding or wearability. To address this, we developed a novel Multiple Intentions Decoding Human-Machine Interface (MI-DHMI) that integrates high-throughput surface electromyography (sEMG) sensors with hand-mounted and forearm-mounted inertial measurement units (IMUs). The developed interface is supported by a unified framework for simultaneous multiple intentions decoding. By employing multimodal deep learning and hardware design with a low noise floor, the decoding framework selectively focuses on the sEMG components that are genuinely associated with finger movements. This effectively reduces decoding errors caused by sEMG variability during unconstrained upper-limb motions, thereby significantly enhancing robustness. Even under unconstrained wrist and forearm motion, the interface achieves a gesture recognition accuracy exceeding 97%, grasping force estimation with $R^2 = 0.95$, and hand pose decoding consistent with the actual hand pose, outperforming baseline devices and algorithms. Ablation studies further validate the effectiveness of the proposed decoding framework. Finally, two online experiments were conducted to validate the device, demonstrating its superior performance in high-stability tasks, including a pouring task and object grasping. The developed interface provides a new solution of a fully wearable, multiple intentions decoding system, offering effective support for ubiquitous teleoperation and contributing to the advancement of human-machine interaction research.

cs.RO↗

arXiv2026

Data-Centric Neuromotor Interfaces for Portable Human-Machine Interaction

Dexterous human-machine interaction requires intuitive and expressive interfaces that can be efficiently deployed on constrained edge devices. Flexible material-based neuromotor interfaces hold considerable promise, as they decode human movement intention into natural control. Although emerging flexible electronic skins enable wearable high-fidelity data acquisition, practical deployment inevitably involves trade-offs between computational resources and portability. We present a data-centric paradigm where physiological features yield fundamental separability, providing sufficient discriminative cues for recognition. A wireless, high-bandwidth system developed for collecting various electrophysiological signals, when integrated with muscle-specific electrodes, forms a surface electromyography-based interface. Exploiting highly separable data, a 2,210-parameter model achieves 94.36% accuracy across 34 gestures and can be rapidly deployed on edge devices, establishing a new thousand-parameter benchmark for dexterous decoding. The underlying data-algorithm interactions in the data-centric paradigm are further clarified, demonstrating its feasibility in real-world scenarios. This study provides a principled and validated pathway for practical deployment of reliable neuromotor interfaces.

cs.RO↗

arXiv2026

Human-Inspired Framework for Robotic Craniotomy: Integrating Multimodal Fusion and Adaptive Trajectory Adjustment

Manual craniotomy is a high-risk, skill-dependent procedure associated with surgeon fatigue and potential dural injury. While robotic approaches have improved safety, existing open-loop systems rely solely on preoperative images and cannot compensate for intraoperative registration errors or tissue deformation. To address this, we propose a human-inspired closed-loop robotic craniotomy framework that intelligently integrates preoperative planning with intraoperative execution. An adaptive dual-contour fusion algorithm is employed to generate trajectories that conform to complex cranial geometries while maintaining a consistent tool-bone relative pose. For intraoperative perception, a multimodal two-stage cross-modal attention block (CMA)-temporal convolutional network (TCN)-Transformer network combined with an adaptive Bayesian filter fuses force and acoustic signals to achieve robust breakthrough detection under varying bone conditions. Upon detection, an in-situ projection-based trajectory adjustment strategy dynamically compensates for depth deviations, enabling safe residual bone isolation. Experiments on bovine ribs show a breakthrough prediction accuracy of 97%, a detection latency of 0.048 +/- 0.097 s, and a maximum overshoot of 0.29 mm. All four ex vivo cranial experiments were successfully completed without dural injury. These results demonstrate that the proposed cybernetic framework enables safe and autonomous craniotomy with highly effective closed-loop control.

cs.RO↗

arXiv2026

Multimodal Adaptive Control for Safe Robotic Craniotomy Under Partial Observability

Autonomous robotic craniotomy requires continuous regulation of tool-tissue interactions to mitigate mechanical overload and thermal damage while maintaining surgical efficiency. However, this process is inherently partially observable due to unknown, time-varying tissue properties and the inability to directly measure cutting temperatures under physical occlusion. To address these challenges, we propose RL-MACRO, a cybernetic closed-loop intelligence framework that couples multimodal perception, adaptive decision-making, and robotic execution. This framework empowers the surgical robot to autonomously perceive inaccessible states from partial sensory feedback and dynamically optimize its behaviors under uncertain environment. A CNN-LSTM observer first fuses force and sound feedback to reconstruct the hidden temperature state (R^2=0.939, MAE = 1.717 deg C). This reconstructed temperature, alongside multi-sensor features, forms the belief state for an offline Implicit Q-Learning (IQL) policy. A novel dual-head Actor dynamically coordinates the feed rate, spindle speed, and cutting depth to optimize efficiency within strict safety bounds. These decisions are seamlessly translated into spatial motions via online trajectory re-planning and velocity servoing. Experiments on bovine ribs and six ex vivo goat skulls validate the system's robust perception, adaptive recovery from force/temperature excursions, and smooth execution on irregular surfaces, establishing a data-driven cybernetic paradigm for safe and efficient autonomous bone cutting.

cs.RO↗

arXiv2025

Six-DoF Hand-Based Teleoperation for Omnidirectional Aerial Robots

Omnidirectional aerial robots offer full 6-DoF independent control over position and orientation, making them popular for aerial manipulation. Although advancements in robotic autonomy, human operation remains essential in complex aerial environments. Existing teleoperation approaches for multirotors fail to fully leverage the additional DoFs provided by omnidirectional rotation. Additionally, the dexterity of human fingers should be exploited for more engaged interaction. In this work, we propose an aerial teleoperation system that brings the rotational flexibility of human hands into the unbounded aerial workspace. Our system includes two motion-tracking marker sets--one on the shoulder and one on the hand--along with a data glove to capture hand gestures. Using these inputs, we design four interaction modes for different tasks, including Spherical Mode and Cartesian Mode for long-range moving, Operation Mode for precise manipulation, as well as Locking Mode for temporary pauses, where the hand gestures are utilized for seamless mode switching. We evaluate our system on a vertically mounted valve-turning task in the real world, demonstrating how each mode contributes to effective aerial manipulation. This interaction framework bridges human dexterity with aerial robotics, paving the way for enhanced aerial teleoperation in unstructured environments.

cs.RO↗