arXiv subjects

Lin Chang

Publications and source records attributed to Lin Chang.

48 records · Page 3Linked to original sources

arXiv2020

Hertz-linewidth semiconductor lasers using CMOS-ready ultra-high-$Q$ microresonators

Driven by narrow-linewidth bench-top lasers, coherent optical systems spanning optical communications, metrology and sensing provide unrivalled performance. To transfer these capabilities from the laboratory to the real world, a key missing ingredient is a mass-produced integrated laser with superior coherence. Here, we bridge conventional semiconductor lasers and coherent optical systems using CMOS-foundry-fabricated microresonators with record high $Q$ factor over 260 million and finesse over 42,000. Five orders-of-magnitude noise reduction in the pump laser is demonstrated, and for the first time, fundamental noise below 1 Hz$^2$ Hz$^{-1}$ is achieved in an electrically-pumped integrated laser. Moreover, the same configuration is shown to relieve dispersion requirements for microcomb generation that have handicapped certain nonlinear platforms. The simultaneous realization of record-high $Q$ factor, highly coherent lasers and frequency combs using foundry-based technologies paves the way for volume manufacturing of a wide range of coherent optical systems.

physics.optics↗

arXiv2020

Ultraprecise optical-frequency stabilization with heterogeneous III-V/Si lasers

Demand for low-noise, continuous-wave, frequency-tunable lasers based on semiconductor integrated photonics has been advancing in support of numerous applications. In particular, an important goal is to achieve narrow spectral linewidth, commensurate with bulk-optic or fiber-optic laser platforms. Here, we report on laser-frequency-stabilization experiments with a heterogeneously integrated III/V-Si widely tunable laser and a high-finesse, thermal-noise-limited photonic resonator. This hybrid architecture offers a chip-scale optical-frequency reference with an integrated linewidth of 60 Hz and a fractional frequency stability of 2.5e-13 at 1-second integration time. We explore the potential for stabilization with respect to a resonator with lower thermal noise by characterizing laser-noise contributions such as residual amplitude modulation and photodetection noise. Widely tunable, compact and integrated, cost effective, stable and narrow linewidth lasers are envisioned for use in various fields, including communication, spectroscopy, and metrology.

physics.optics↗

arXiv2020

Dissipative Kerr Solitons in a III-V Microresonator

We demonstrate stable microresonator Kerr soliton frequency combs in a III-V platform (AlGaAs on SiO$_2$) through quenching of thermorefractive effects by cryogenic cooling to temperatures between 4~K and 20~K. This cooling reduces the resonator's thermorefractive coefficient, whose room-temperature value is an order of magnitude larger than that of other microcomb platforms like Si$_3$N$_4$, SiO$_2$, and AlN, by more than two orders of magnitude, and makes soliton states adiabatically accessible. Realizing such phase-stable soliton operation is critical for applications that fully exploit the ultra-high effective nonlinearity and high optical quality factors exhibited by this platform.

physics.optics↗

arXiv2020

Ultrahigh-Q AlGaAs-on-insulator microresonators for integrated nonlinear photonics

Aluminum gallium arsenide (AlGaAs) and related III-V semiconductors have excellent optoelectronic properties. They also possess strong material nonlinearity as well as high refractive indices. In view of these properties, AlGaAs is a promising candidate for integrated photonics, including both linear and nonlinear devices, passive and active devices, and associated applications. For integrated photonics low propagation loss is essential, particularly in nonlinear applications. However, achieving low-loss and high-confinement AlGaAs photonic integrated circuits poses a challenge. Here we show an effective reduction of surface-roughness-induced scattering loss in fully etched high-confinement AlGaAs-on-insulator nanowaveguides, by using a heterogeneous wafer-bonding approach and optimizing fabrication techniques. We demonstrate ultrahigh-quality AlGaAs microring resonators and realize quality factors up to 3.52E6 and finesses as high as 1.4E4. We also show ultra-efficient frequency comb generations in those resonators and achieve record-low threshold powers on the order of ~20 uW and ~120 uW for the resonators with 1 THz and 90 GHz free-spectral ranges, respectively. Our result paves the way for the implementation of AlGaAs as a novel integrated material platform specifically for nonlinear photonics, and opens a new window for chip-based efficiency-demanding practical applications.

physics.optics↗

arXiv2020

Efficient second harmonic generation in nanophotonic GaAs-on-insulator waveguides

Nonlinear frequency conversion plays a crucial role in advancing the functionality of next-generation optical systems. Portable metrology references and quantum networks will demand highly efficient second-order nonlinear devices, and the intense nonlinear interactions of nanophotonic waveguides can be leveraged to meet these requirements. Here we demonstrate second harmonic generation (SHG) in GaAs-on-insulator waveguides with unprecedented efficiency of 40 W$^{-1}$ for a single-pass device. This result is achieved by minimizing the propagation loss and optimizing phase-matching. We investigate surface-state absorption and design the waveguide geometry for modal phase-matching with tolerance to fabrication variation. A 2.0 $μ$m pump is converted to a 1.0 $μ$m signal in a length of 2.9 mm with a wide signal bandwidth of 148 GHz. Tunable and efficient operation is demonstrated over a temperature range of 45 $^{\circ}$C with a slope of 0.24 nm/$^{\circ}$C. Wafer-bonding between GaAs and SiO$_2$ is optimized to minimize waveguide loss, and the devices are fabricated on 76 mm wafers with high uniformity. We expect this device to enable fully integrated self-referenced frequency combs and high-rate entangled photon pair generation.

physics.optics↗

arXiv2019

Integrated turnkey soliton microcombs operated at CMOS frequencies

While soliton microcombs offer the potential for integration of powerful frequency metrology and precision spectroscopy systems, their operation requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components. Moreover, CMOS-rate microcombs, required in nearly all comb systems, have resisted integration because of their power requirements. Here, a regime for turnkey operation of soliton microcombs co-integrated with a pump laser is demonstrated and theoretically explained. Significantly, a new operating point is shown to appear from which solitons are generated through binary turn-on and turn-off of the pump laser, thereby eliminating all photonic/electronic control circuitry. These features are combined with high-Q $Si_3N_4$ resonators to fully integrate into a butterfly package microcombs with CMOS frequencies as low as 15 GHz, offering compelling advantages for high-volume production.

physics.optics↗

arXiv2019

Ultra-efficient frequency comb generation in AlGaAs-on-insulator microresonators

Recent advances in nonlinear optics have revolutionized the area of integrated photonics, providing on-chip solutions to a wide range of new applications. Currently, the state of the art integrated nonlinear photonic devices are mainly based on dielectric material platforms, such as Si3N4 and SiO2. While semiconductor materials hold much higher nonlinear coefficients and convenience in active integration, they suffered in the past from high waveguide losses that prevented the realization of highly efficient nonlinear processes on-chip. Here we challenge this status quo and demonstrate an ultra-low loss AlGaAs-on-insulator (AlGaAsOI) platform with anomalous dispersion and quality (Q) factors beyond 1.5*10^6. Such a high quality factor, combined with the high nonlinear coefficient and the small mode volume, enabled us to demonstrate a record low Kerr frequency comb generation threshold of ~36 uW for a resonator with a 1 THz free spectral range (FSR), ~100 times lower compared to that in previous semiconductor platform. Combs with >250 nm broad span have been generated under a pump power lower than the threshold power of state of the art dielectric micro combs. A soliton-step transition has also been observed for the first time from an AlGaAs resonator. This work is an important step towards ultra-efficient semiconductor-based nonlinear photonics and will lead to fully integrated nonlinear photonic integrated circuits (PICs) in near future.

physics.optics↗

arXiv2019

Improved second harmonic performance in periodically poled LNOI waveguides through engineering of lateral leakage

In this contribution we investigate the impact of lateral leakage for linear and nonlinear optical waveguides in lithium niobate on insulator (LNOI). Silicon nitride (SiN) loaded and direct patterned lithium niobate cross-sections are investigated. We show that lateral leakage can take place for the TE mode in LNOI ridge waveguides (X-cut lithium niobate), due to the birefringence of the material. This work gives guidelines for designing waveguides in LNOI that do not suffer from the lateral leakage effect. By applying these design considerations, we avoided the lateral leakage effect at the second harmonic wavelength of a nonlinear optical waveguide in LNOI and demonstrate a peak second harmonic generation conversion efficiency of ~1160% W-1cm-2.

physics.optics↗

arXiv2019

On-chip polarization rotator for type I second harmonic generation

We demonstrate a polarization rotator integrated at the output of a GaAs waveguide producing type I second harmonic generation (SHG). Form-birefringent phase matching between the pump fundamental transverse electric (TE) mode near 2.0 $μ$m wavelength and the signal fundamental transverse magnetic (TM) mode efficiently generates light at 1.0 $μ$m wavelength. A SiN waveguide layer is integrated with the SHG device to form a multi-functional photonic integrated circuit. The polarization rotator couples light between the two layers and rotates the polarization from TM to TE or from TE to TM. With a TE-polarized 2.0 $μ$m pump, type I SHG is demonstrated with the signal rotated to TE polarization. Passive transmission near 1.0 $μ$m wavelength shows ~80 % polarization rotation across a broad bandwidth of ~100 nm. By rotating the signal polarization to match that of the pump, this SHG device demonstrates a critical component of an integrated self-referenced octave-spanning frequency comb. This device is expected to provide crucial functionality as part of a fully integrated optical frequency synthesizer with resolution of less than one part in 10$^{14}$.

physics.optics↗

arXiv2018

Heterogeneously integrated GaAs waveguides on insulator for efficient frequency conversion

Tremendous scientific progress has been achieved through the development of nonlinear integrated photonics. Prominent examples are Kerr-frequency-comb generation in micro-resonators, and supercontinuum generation and frequency conversion in nonlinear photonic waveguides. High conversion efficiency is enabling for applications of nonlinear optics, including such broad directions as high-speed optical signal processing, metrology, and quantum communication and computation. In this work, we demonstrate a gallium-arsenide-on-insulator (GaAs) platform for nonlinear photonics. GaAs has among the highest second- and third-order nonlinear optical coefficients, and use of a silica cladding results in waveguides with a large refractive index contrast and low propagation loss for expanded design of nonlinear processes. By harnessing these properties and developing nanofabrication with GaAs, we report a record normalized second-harmonic efficiency of 13,000% W-1cm-2 at a fundamental wavelength of 2 um. This work paves the way for high performance nonlinear photonic integrated circuits (PICs), which not only can transition advanced functionalities outside the lab through fundamentally reduced power consumption and footprint, but also enables future optical sources and detectors.

physics.optics↗

arXiv2017

Quasi-phase-matched supercontinuum-generation in photonic waveguides

Supercontinuum generation in integrated photonic waveguides is a versatile source of broadband light, and the generated spectrum is largely determined by the phase-matching conditions. Here we show that quasi-phase-matching via periodic modulations of the waveguide structure provides a useful mechanism to control the evolution of ultrafast pulses and the supercontinuum spectrum. We experimentally demonstrate quasi-phase-matched supercontinuum to the TE20 and TE00 waveguide modes, which enhances the intensity of the SCG in specific spectral regions by as much as 20 dB. We utilize higher-order quasi-phase-matching (up to the 16th order) to enhance the intensity in numerous locations across the spectrum. Quasi-phase-matching adds a unique dimension to the design-space for SCG waveguides, allowing the spectrum to be engineered for specific applications.

physics.optics↗

arXiv2017

An Integrated-Photonics Optical-Frequency Synthesizer

Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated devices to impact applications cutting across disciplines of basic science and technology. Here we show how to synthesize the absolute frequency of a lightwave signal, using integrated photonics to implement lasers, system interconnects, and nonlinear frequency comb generation. The laser frequency output of our synthesizer is programmed by a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and traceability to the SI second. This is accomplished with a heterogeneously integrated III/V-Si tunable laser, which is guided by dual dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through out-of-loop measurements of the phase-coherent, microwave-to-optical link, we verify that the fractional-frequency instability of the integrated photonics synthesizer matches the $7.0*10^{-13}$ reference-clock instability for a 1 second acquisition, and constrain any synthesis error to $7.7*10^{-15}$ while stepping the synthesizer across the telecommunication C band. Any application of an optical frequency source would be enabled by the precision optical synthesis presented here. Building on the ubiquitous capability in the microwave domain, our results demonstrate a first path to synthesis with integrated photonics, leveraging low-cost, low-power, and compact features that will be critical for its widespread use.

physics.app-ph↗