arXiv subjects

Lina Grineviciute

Publications and source records attributed to Lina Grineviciute.

8 recordsLinked to original sources

arXiv2026

Oxidation of Tantalum Nano-Film by Microwave Exposure

Oxidation and ablation of 200 nm tantalum films were carried out by three routes: (i) femtosecond (fs-)laser direct write, (ii) high-temperature annealing (HTA) in a tube furnace, and (iii) annealing in a 2.45 GHz microwave cavity. Complete conversion of the 200 nm Ta layer into 409 nm of Ta2O5 required one hour at 600 C in the furnace, but only minutes at ~ 50 W of microwave power. Fs-laser (515 nm/200 fs) oxidation of the Ta nano-film set in at an average single-pulse fluence of ~ 0.1 J/cm2 under strong pulse-to-pulse overlap (900 pulses per focal spot), i.e. within a narrow window bounded from above by the onset of ablation. Under microwave annealing, both the cavity resonance frequency and the quality factor Q changed markedly at the metal-to-oxide transition, reflecting the collapse of the real and imaginary parts of the permittivity at 2.45 GHz. This dielectric contrast turns the cavity into a sensor: the oxidation can be followed in real time from the shift of the cavity resonance, providing a non-invasive, in-situ diagnostic tool.

cond-mat.mtrl-sci↗

arXiv2026

Understanding all-dielectric periodically modulated coatings for normal-incidence polarization control

An ultracompact thin-film polarizer for normal-incidence (0° angle of incidence, AOI) applications is analytically and experimentally investigated. The device is based on Fano resonances in periodically nanostructured dielectric thin films, enabling polarization selective reflection and transmission due to polarization dependent resonance frequencies. The operating principle is analyzed both analytically and numerically, and the optimized structure is fabricated and experimentally characterized. Measurements demonstrate polarization contrast ratios of up to approximately 1:1000 at normal incidence. Laser-induced damage threshold measurements using nanosecond laser pulses further confirm the high damage resistance of the all-dielectric polarizer.

physics.optics↗

arXiv2026

Nanoscale Surface Analysis of High Entropy Alloy

Nanoscale surface analysis of 1 micrometer thick high entropy alloys (HEAs) was carried out using nano-IR for hyperspectral imaging and single point spectroscopy in the 700-1700 1/cm spectral range. Nano-IR is based on the detection of scattered light from an oscillating metal coated nano-tip in one of the arms of the Fourier transform infrared spectrometer and has a resolution defined by the tip radius of the probe, 20 nm, regardless of the excitation wavelength. HEA CuPdAgPtAu showed an absorption and reflection increase at 900-1100 1/cm band, which is consistent with Drude-Lorenz modeling of permittivity, however, could also signify oxide formation as tested by X-ray photoelectron spectroscopy of CuPdAgPtAu and CrFeCoNiCuMo. Realization of polarization analysis for nano-IR nano-spectroscopy in the plane perpendicular to the sample's surface is discussed and modeled. The currently available modality of surface analysis with the excitation-detection mode of the p-pol. antenna can be extended to full 3D analysis of the orientational dependencies of local absorbance and refractive index.

physics.optics↗

arXiv2026

Burst-mode fs-laser direct writing for full-thickness oxidation of Ta thin films

Direct fs-laser (1030~nm/200~fs) write of a throughout oxide Ta$_{2}$O$_{5}$ on a 200~nm Ta film was achieved using a combined ps- and ns- burst mode (Burst-in-Burst or BiB) of fs-pulse exposure at a high 0.6~MHz repetition rate. Few micrometers-wide lines were formed at the center of 12~$μ$m focal spot by controlled oxidation without ablation. The oxidized regions were flat and optically transparent. Wavelength-scale self-organized ripples of oxidized Ta$_{2}$O$_{5}$ sub-1~$μ$m gratings were recorded by rastering a $1\times 1$~mm$^2$ area. The oxidized ripples with periodic pattern $\sim wavelength$ were aligned with the polarization of the writing beam. Energy deposition in the burst-mode oxidation is discussed by comparing 200~fs and 20~ps BiB-mode writing modes. The presented strategy of self-guided oxidation with heat deposition by BiB fs-laser opens an opportunity for debris-free and annealing-free oxidation on a sub-wavelength scale.

physics.optics↗

arXiv2024

3D Free-Form Optical Lens -- Miniaturised Fibre Couplers for Astrophotonics

In astronomy, multi-object spectrographs employ fibre positioning robots to couple the light from multiple astronomy sources (stars or galaxies) into multiple multi-mode fibres, which are distributed across the focal plane of the telescope. These fibres transport the celestial light to the entrance slit of a spectrograph (or bank of spectrographs) for analysis. For any multi-object system mm-scale opto-mechanical solutions are required to couple the telescope light efficiently into the fibre. We demonstrate a unique micro-optics solution to replace current optical fibre couplers. Specifically, we target technology on board the Keck telescope's FOBOS - Fibre-Optic Broadband Optical Spectrograph - which operates at UV to IR spectral ranges. For spectrally broad UV-IR band operation we use glass and crystals: fused silica, crystalline quartz (transparency 0.16 - 2 micrometers), sapphire Al2O3 (0.2 - 5 micrometers), CaF2 (0.2-7 micrometers), and BaF2 (0.2-10 micrometers). The miniaturised micro-coupler is monolithic, with the entire light path contained within glass or crystal, seamlessly extending to the fibre entrance, which is laser-machined and precisely aligned with the optical axis.

astro-ph.IM↗

arXiv2024

Light Trapping by Non-Hermitian Thin Films

One of the exceptional features of non-Hermitian systems is the unidirectional wave interactions. Simultaneous modulation of the real and the imaginary part of the interaction potentials (of the refractive index and the gain/loss in the case of optical systems) can result in unequal coupling coefficients between the fields of different parts of the system. The unidirectional coupling can also be arranged not only between the internal fields of the system but also between internal fields and external radiation. At a particular (exceptional) point the situation can be achieved, that the external radiation is efficiently coupled into the system, but the internal radiation cannot escape backwards. In this way, the incident radiation can be trapped inside the non-Hermitian system and, eventually, can be efficiently absorbed there. We realize this idea in non-Hermitically modulated thin films. The modulation consists of a Hermitian part - the periodic corrugation of the surfaces of a thin film, and a non-Hermitian part - the modulation of losses along the film. We prove numerically and demonstrate experimentally that the incident radiation, coupled with such a non-Hermitian thin film, is unidirectionally trapped into a planar mode of the film, does not escape from the film (or escape weakly due to experimental imperfections), and is efficiently absorbed there.

physics.optics↗

arXiv2022

Extremely Narrow, Sharp-Peaked Resonances at the Edge of the Continuum

We report a critical narrowing of resonances of a driven potential well, when their eigenfrequencies approach the edge of the continuum. The resonances also obtain unusual sharp-peak shapes at the continuum boundary. The situation can be realized for the electromagnetic wave propagating across the dielectric thin films with a periodically modulated interface(s). We show the general phenomenon semi-analytically on a simplified model of a driven quantum potential well, also by rigorous numerical analysis of Maxwell equations for the wave propagation across the thin film with a modulated interface(s). We justify the phenomenon experimentally, by the measurements of light reflection from the dielectric thin film deposited on a periodically modulated surface. The narrow and sharp-peak resonances can be used for an efficient narrow-band frequency- and spatial filtering of light.

physics.optics↗

arXiv2020

Nanostructured Multilayer Coatings for Spatial Filtering

Spatial filtering is an important mechanism to improve the spatial quality of laser beams. Typically, a confocal arrangement of lenses with a diaphragm in the focal plane is used for intracavity spatial filtering. Such conventional filtering requires access to the far-field domain. In microlasers, however, conventional filtering is impossible due to the lack of space in micro-resonators to access the far-field. Therefore, a novel concept for more compact and efficient spatial filtering is necessary. In this study, we propose and demonstrate a conceptually novel mechanism of spatial filtering in the near-field domain, by a nanostructured multilayer coating - a 2D photonic crystal structure with a periodic index modulation along the longitudinal and transverse direction to the beam propagation. The structure is built on a nano-modulated substrate, to provide the transverse periodicity. The physical vapor deposition is used to provide self-repeating modulation in the longitudinal direction. We experimentally demonstrate a 5 micron thick photonic multilayer structure composed of nanostructured multiple layers of alternating high- and low-index materials providing spatial filtering in the near-infrared frequencies with 2° low angle passband. The proposed photonic structure can be considered as an ideal component for intracavity spatial filtering in microlasers.

physics.optics↗