SearcharxivSearch

arXiv subjects

Lina Pu

Publications and source records attributed to Lina Pu.

11 recordsLinked to original sources

FedReplay: A Feature Replay Assisted Federated Transfer Learning Framework for Efficient and Privacy-Preserving Smart Agriculture

Accurate classification plays a pivotal role in smart agriculture, enabling applications such as crop monitoring, fruit recognition, and pest detection. However, conventional centralized training often requires large-scale data collection, which raises privacy concerns, while standard federated learning struggles with non-independent and identically distributed (non-IID) data and incurs high communication costs. To address these challenges, we propose a federated learning framework that integrates a frozen Contrastive Language-Image Pre-training (CLIP) vision transformer (ViT) with a lightweight transformer classifier. By leveraging the strong feature extraction capability of the pre-trained CLIP ViT, the framework avoids training large-scale models from scratch and restricts federated updates to a compact classifier, thereby reducing transmission overhead significantly. Furthermore, to mitigate performance degradation caused by non-IID data distribution, a small subset (1%) of CLIP-extracted feature representations from all classes is shared across clients. These shared features are non-reversible to raw images, ensuring privacy preservation while aligning class representation across participants. Experimental results on agricultural classification tasks show that the proposed method achieve 86.6% accuracy, which is more than 4 times higher compared to baseline federated learning approaches. This demonstrates the effectiveness and efficiency of combining vision-language model features with federated learning for privacy-preserving and scalable agricultural intelligence.

cs.CV

VLLFL: A Vision-Language Model Based Lightweight Federated Learning Framework for Smart Agriculture

In modern smart agriculture, object detection plays a crucial role by enabling automation, precision farming, and monitoring of resources. From identifying crop health and pest infestations to optimizing harvesting processes, accurate object detection enhances both productivity and sustainability. However, training object detection models often requires large-scale data collection and raises privacy concerns, particularly when sensitive agricultural data is distributed across farms. To address these challenges, we propose VLLFL, a vision-language model-based lightweight federated learning framework (VLLFL). It harnesses the generalization and context-aware detection capabilities of the vision-language model (VLM) and leverages the privacy-preserving nature of federated learning. By training a compact prompt generator to boost the performance of the VLM deployed across different farms, VLLFL preserves privacy while reducing communication overhead. Experimental results demonstrate that VLLFL achieves 14.53% improvement in the performance of VLM while reducing 99.3% communication overhead. Spanning tasks from identifying a wide variety of fruits to detecting harmful animals in agriculture, the proposed framework offers an efficient, scalable, and privacy-preserving solution specifically tailored to agricultural applications.

cs.CV

ML-ARIS: Multilayer Underwater Acoustic Reconfigurable Intelligent Surface with High-Resolution Reflection Control

This article introduces a multilayered acoustic reconfigurable intelligent surface (ML-ARIS) architecture designed for the next generation of underwater communications. ML-ARIS incorporates multiple layers of piezoelectric material in each acoustic reflector, with the load impedance of each layer independently adjustable via a control circuit. This design increases the flexibility in generating reflected signals with desired amplitudes and orthogonal phases, enabling passive synthetic reflection using a single acoustic reflector. Such a feature enables precise beam steering, enhancing sound levels in targeted directions while minimizing interference in surrounding environments. Extensive simulations and tank experiments were conducted to verify the feasibility of ML-ARIS. The experimental results indicate that implementing synthetic reflection with a multilayer structure is indeed practical in real-world scenarios, making it possible to use a single reflection unit to generate reflected waves with high-resolution amplitudes and phases.

eess.AS

Underwater Acoustic Reconfigurable Intelligent Surfaces: from Principle to Practice

This article explores the potential of underwater acoustic reconfigurable intelligent surfaces (UA-RIS) for facilitating long-range and eco-friendly communication in marine environments. Unlike radio frequency-based RIS (RF-RIS), which have been extensively investigated in terrestrial contexts, UA-RIS is an emerging field of study. The distinct characteristics of acoustic waves, including their slow propagation speed and potential for noise pollution affecting marine life, necessitate a fundamentally different approach to the architecture and design principles of UA-RIS compared to RF-RIS. Currently, there is a scarcity of real systems and experimental data to validate the feasibility of UA-RIS in practical applications. To fill this gap, this article presents field tests conducted with a prototype UA-RIS consisting of 24 acoustic elements. The results demonstrate that the developed prototype can effectively reflect acoustic waves to any specified directions through passive beamforming, thereby substantially extending the range and data rate of underwater communication systems.

eess.SP

Experimental Study of Underwater Acoustic Reconfigurable Intelligent Surfaces with Synthetic Reflection

This paper presents an underwater acoustic reconfigurable intelligent surface (UA-RIS) designed for long-range, high-speed, and environmentally friendly communication in oceanic environments. The proposed UA-RIS comprises multiple pairs of acoustic reflectors that utilize a synthetic reflection scheme to flexibly control the amplitude and phase of reflected waves. This capability enables precise beam steering to enhance or attenuate sound levels in specific directions. A prototype UA-RIS with 4*6 acoustic reflection units is constructed and tested in both tank and lake environments to evaluate performance. Experimental results using a continuous wave (CW) as the source signal demonstrate that the prototype is capable of effectively pointing reflected waves to targeted directions while minimizing side lobes through synthetic reflection. Field tests reveal that deploying the UA-RIS on the sender side considerably extends communication ranges by 28% in deep water and 46% in shallow waters. Furthermore, with a fixed communication distance, positioning the UA-RIS at the transmitter side substantially boosts the receiving signal-to-noise ratio (SNR), with an average increase of 2.13 dB and peaks up to 2.92 dB. When positioned on the receiver side, the UA-RIS can expand the communication range in shallow and deep water environments by 40.6% and 66%, respectively. Moreover, placing the UA-RIS close to the receiver enhances SNR by an average of 2.56 dB, reaching up to 4.2 dB under certain circumstances.

eess.SY

Enhancing In-Situ Structural Health Monitoring through RF Energy-Powered Sensor Nodes and Mobile Platform

This research contributes to long-term structural health monitoring (SHM) by exploring radio frequency energy-powered sensor nodes (RF-SNs) embedded in concrete. Unlike traditional in-situ monitoring systems relying on batteries or wire-connected power sources, the RF-SN captures radio energy from a mobile radio transmitter for sensing and communication. This offers a cost-effective solution for consistent in-situ perception. To optimize the system performance across various situations, we've explored both active and passive communication methods. For the active RF-SN, we implement a specialized control circuit enabling the node to transmit data through ZigBee protocol at low incident power. For the passive RF-SN, radio energy is not only for power but also as a carrier signal, with data conveyed by modulating the amplitude of the backscattered radio wave. To address the challenge of significant attenuation of the backscattering signal in concrete, we utilize a square chirp-based modulation scheme for passive communication. This scheme allows the receiver to successfully decode the data even under a negative signal-to-noise ratio (SNR) condition. The experimental results indicate that an active RF-SN embedded in concrete at a depth of 13.5 cm can be effectively powered by a 915MHz mobile radio transmitter with an effective isotropic radiated power (EIRP) of 32.5dBm. This setup allows the RF-SN to send over 1 kilobyte of data within 10 seconds, with an additional 1.7 kilobytes every 1.6 seconds of extra charging. For the passive RF-SN buried at the same depth, continuous data transmission at a rate of 224 bps with a 3% bit error rate (BER) is achieved when the EIRP of the transmitter is 23.6 dBm.

eess.SY

Practical Issues of Energy Harvesting and Data Transmissions in Sustainable IoT

The sustainable Internet of Things (IoT) is becoming a promising solution for the green living and smart industries. In this article, we investigate the practical issues in the radio energy harvesting and data communication systems through extensive field experiments. A number of important characteristics of energy harvesting circuits and communication modules have been studied, including the non-linear energy consumption of the communication system relative to the transmission power, the wake-up time associated with the payload, and the varying system power during consecutive packet transmissions. In order to improve the efficiency of energy harvest and energy utilization, we propose a new model to accurately describe the energy harvesting process and the power consumption for sustainable IoT devices. Experiments are performed using commercial IoT devices and RF energy harvesters to verify the accuracy of the proposed model. The experiment results show that the new model matches the performance of sustainable IoT devices very well in the real scenario.

eess.SP

RF Energy Harvesting Sensor Networks for Healthcare of Animals: Opportunities and Challenges

In recent years, the radio frequency (RF) energy harvesting technique is considered as a favorable alternative to supply power for the next-generation wireless sensor networks. Due to the features of energy self-sustainability and long lifetime, the energy harvesting sensor network (RF-EHSN) becomes a promising solution to provide smart healthcare services. Nowadays, many energy harvesting based applications have been developed for monitoring the health status of human beings; how to benefit animals, however, has not yet drawn people's attention. This article explores the potential of applying RF-EHSNs to monitoring the health level of animals. The unique challenges and potential solutions at different layers of an RF-EHSN for animals' healthcare service are studied.

cs.NI

DTER: Schedule Optimal RF Energy Request and Harvest for Internet of Things

We propose a new energy harvesting strategy that uses a dedicated energy source (ES) to optimally replenish energy for radio frequency (RF) energy harvesting powered Internet of Things. Specifically, we develop a two-step dual tunnel energy requesting (DTER) strategy that minimizes the energy consumption on both the energy harvesting device and the ES. Besides the causality and capacity constraints that are investigated in the existing approaches, DTER also takes into account the overhead issue and the nonlinear charge characteristics of an energy storage component to make the proposed strategy practical. Both offline and online scenarios are considered in the second step of DTER. To solve the nonlinear optimization problem of the offline scenario, we convert the design of offline optimal energy requesting problem into a classic shortest path problem and thus a global optimal solution can be obtained through dynamic programming (DP) algorithms. The online suboptimal transmission strategy is developed as well. Simulation study verifies that the online strategy can achieve almost the same energy efficiency as the global optimal solution in the long term.

eess.SP

Revisiting Transmission Scheduling in RF Energy Harvesting Wireless Communications

The transmission scheduling is a critical problem in radio frequency (RF) energy harvesting communications. Existing transmission strategies in an RF-based energy harvesting system is mainly based on a classic model, in which the data transmission is scheduled in a fixed feasible energy tunnel. In this paper, we re-examine the classic energy harvesting model and show through the theoretical analysis and experimental results that the bounds of feasible energy tunnel are dynamic, which can be affected by the transmission scheduling due to the impact of residual energy on the harvested one. To describe a practical energy harvesting process more accurately, a new model is proposed by adding a feedback loop that reflects the interplay between the energy harvest and the data transmission. Furthermore, to improve network performance, we revisit the design of an optimal transmission scheduling strategy based on the new model. To handle the challenge of the endless feedback loop in the new model, a recursive algorithm is developed. The simulation results reveal that the new transmission scheduling strategy can balance the efficiency of energy reception and energy utilization regardless of the length of energy packets, achieving improved throughput performance for wireless communications.

eess.SP