arXiv subjects

Linbo Shao

Publications and source records attributed to Linbo Shao.

At least 37 records · Page 2Linked to original sources

arXiv2022

Thermal Modulation of Gigahertz Surface Acoustic Waves on Lithium Niobate

Surface acoustic wave (SAW) devices have wide range of applications in microwave signal processing. Microwave SAW components benefit from higher quality factors and much smaller crosstalk when compared to their electromagnetic counterparts. Efficient routing and modulation of SAWs are essential for building large-scale and versatile acoustic-wave circuits. Here, we demonstrate integrated thermo-acoustic modulators using two SAW platforms: bulk lithium niobate and thin-film lithium niobate on sapphire. In both approaches, the gigahertz-frequency SAWs are routed by integrated acoustic waveguides while on-chip microheaters are used to locally change the temperature and thus control the phase of SAW. Using this approach, we achieved phase changes of over 720 degrees with the responsibility of 2.6 deg/mW for bulk lithium niobate and 0.52 deg/mW for lithium niobate on sapphire. Furthermore, we demonstrated amplitude modulation of SAWs using acoustic Mach Zehnder interferometers. Our thermo-acoustic modulators can enable reconfigurable acoustic signal processing for next generation wireless communications and microwave systems.

physics.app-ph↗

arXiv2022

Systematic Investigation of Millimeter-Wave Optic Modulation Performance in Thin-Film Lithium Niobate

Millimeter-wave (mmWave) band (30 - 300 GHz) is an emerging spectrum range for wireless communication, short-range radar and sensor applications. mmWave-optic modulators that could efficiently convert mmWave signals into optical domain are crucial components for long-haul transmission of mmWave signals through optical networks. At these ultrahigh frequencies, however, the modulation performances are highly sensitive to the transmission line loss as well as the velocity- and impedance-matching conditions, while precise measurements and modeling of these parameters are often non-trivial. Here we present a systematic investigation of the mmWave-optic modulation performances of thin-film lithium niobate modulators through theoretical modeling, electrical verifications and electro-optic measurements at frequencies up to 325 GHz. Based on our experimentally verified model, we demonstrate thin-film lithium niobate mmWave-optic modulators with a measured 3-dB electro-optic bandwidth of 170 GHz and a 6-dB bandwidth of 295 GHz. The device also shows a low RF half-wave voltage of 7.3 V measured at an ultrahigh modulation frequency of 250 GHz. This work provides a comprehensive guideline for the design and characterization of mmWave-optic modulators and paves the way toward future integrated mmWave photonic systems for beyond-5G communication and radar applications.

physics.optics↗

arXiv2022

Electrical Control of Surface Acoustic Waves

Acoustic waves at microwave frequencies have been widely used in wireless communication and recently emerged as versatile information carriers in quantum applications. However, most acoustic devices are passive components, and dynamic control of acoustic waves in a low-loss and scalable manner remains an outstanding challenge, which hinders the development of phononic integrated circuits. Here we demonstrate electrical control of traveling acoustic waves on an integrated lithium niobate platform at both room and millikelvin temperatures. We modulate the phase and amplitude of the acoustic waves and demonstrate an acoustic frequency shifter by serrodyne phase modulation. Furthermore, we show reconfigurable nonreciprocal modulation by tailoring the phase matching between acoustic and quasi-traveling electric fields. Our scalable electro-acoustic platform comprises the fundamental elements for arbitrary acoustic signal processing and manipulation of phononic quantum information.

physics.app-ph↗

arXiv2021

Spectral control of nonclassical light using an integrated thin-film lithium niobate modulator

Manipulating the frequency and bandwidth of nonclassical light is essential for implementing frequency-encoded/multiplexed quantum computation, communication, and networking protocols, and for bridging spectral mismatch among various quantum systems. However, quantum spectral control requires a strong nonlinearity mediated by light, microwave, or acoustics, which is challenging to realize with high efficiency, low noise, and on an integrated chip. Here, we demonstrate both frequency shifting and bandwidth compression of nonclassical light using an integrated thin-film lithium niobate (TFLN) phase modulator. We achieve record-high electro-optic frequency shearing of telecom single photons over terahertz range ($\pm$ 641 GHz or $\pm$ 5.2 nm), enabling high visibility quantum interference between frequency-nondegenerate photon pairs. We further operate the modulator as a time lens and demonstrate over eighteen-fold (6.55 nm to 0.35 nm) bandwidth compression of single photons. Our results showcase the viability and promise of on-chip quantum spectral control for scalable photonic quantum information processing.

physics.optics↗

arXiv2021

Femtosecond Pulse Generation via an Integrated Electro-Optic Time Lens

Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications. The leading approaches for on-chip pulse generation rely on mode locking inside microresonator with either third-order nonlinearity or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength tunability and repetition rates. Alternatively, sub-picosecond pulses can be synthesized without mode-locking, by modulating a continuous-wave (CW) single-frequency laser using a cascade of electro-optic (EO) modulators. This method is particularly attractive due to its simplicity, robustness, and frequency-agility but has been realized only on a tabletop using multiple discrete EO modulators and requiring optical amplifiers (to overcome large insertion losses), microwave amplifiers, and phase shifters. Here we demonstrate a chip-scale femtosecond pulse source implemented on an integrated lithium niobate (LN) photonic platform18, using cascaded low-loss electro-optic amplitude and phase modulators and chirped Bragg grating, forming a time-lens system. The device is driven by a CW distributed feedback (DFB) chip laser and controlled by a single CW microwave source without the need for any stabilization or locking. We measure femtosecond pulse trains (520 fs duration) with a 30-GHz repetition rate, flat-top optical spectra with a 10-dB optical bandwidth of 12.6 nm, individual comb-line powers above 0.1 milliwatt, and pulse energies of 0.54 picojoule. Our results represent a tunable, robust and low-cost integrated pulsed light source with CW-to-pulse conversion efficiencies an order of magnitude higher than achieved with previous integrated sources. Our pulse generator can find applications from ultrafast optical measurement to networks of distributed quantum computers.

physics.optics↗

arXiv2021

High-efficiency and broadband electro-optic frequency combs enabled by coupled micro-resonators

Developments in integrated photonics have led to stable, compact, and broadband comb generators that support a wide range of applications. Current on-chip comb generators, however, are still limited by low optical pump-to-comb conversion efficiencies. Here, we demonstrate an integrated electro-optic frequency comb with a conversion efficiency of 30% and an optical bandwidth of 132 nm, featuring a 100-times higher conversion efficiency and 2.2-times broader optical bandwidth compared with previous state-of-the-art integrated electro-optic combs. We further show that, enabled by the high efficiency, the device acts as an on-chip femtosecond pulse source (336 fs pulse duration), which is important for applications in nonlinear optics, sensing, and computing. As an example, in the ultra-fast and high-power regime, we demonstrate the observation of a combined EO-χ^(3) nonlinear frequency comb. Our device paves the way for practical optical frequency comb generators enabling energy-efficient computing, communication, and metrology, and provides a platform to investigate new regimes of optical physics that simultaneously involve multiple nonlinearities.

physics.optics↗

arXiv2021

Electrically-pumped high-power laser transmitter integrated on thin-film lithium niobate

Integrated thin-film lithium niobate (TFLN) photonics has emerged as a promising platform for realization of high-performance chip-scale optical systems. Of particular importance are TFLN electro-optic modulators featuring high-linearity, low driving voltage and lowpropagation loss. However, fully integrated system requires integration of high power, low noise, and narrow linewidth lasers on TFLN chip. Here we achieve this goal, and demonstrate integrated high-power lasers on TFLN platform with up to 60 mW of optical power in the waveguides. We use this platform to realize a highpower transmitter consisting an electrically-pumped laser integrated with a 50 GHz modulator.

physics.app-ph↗

arXiv2021

Coherent coupling of mechanics to a single nuclear spin

Nuclear spins interact weakly with their environment. In particular, they are generally insensitive to mechanical vibrations. Here, we successfully demonstrate the coherent coupling of mechanics to a single nuclear spin. This coupling is mediated by a silicon vacancy (SiV) centre in diamond, taking advantage of its large strain susceptibility and hyperfine interaction with nuclear spins. Importantly, we demonstrate that the nuclear spin retains its excellent coherence properties even in the presence of this coupling. This provides a way to leverage nuclear spins as quantum memories for mechanical systems in the quantum regime.

quant-ph↗

arXiv2021

Integrated photonics on thin-film lithium niobate

Lithium niobate (LN), an outstanding and versatile material, has influenced our daily life for decades: from enabling high-speed optical communications that form the backbone of the Internet to realizing radio-frequency filtering used in our cell phones. This half-century-old material is currently embracing a revolution in thin-film LN integrated photonics. The success of manufacturing wafer-scale, high-quality, thin films of LN on insulator (LNOI), accompanied with breakthroughs in nanofabrication techniques, have made high-performance integrated nanophotonic components possible. With rapid development in the past few years, some of these thin-film LN devices, such as optical modulators and nonlinear wavelength converters, have already outperformed their legacy counterparts realized in bulk LN crystals. Furthermore, the nanophotonic integration enabled ultra-low-loss resonators in LN, which unlocked many novel applications such as optical frequency combs and quantum transducers. In this Review, we cover -- from basic principles to the state of the art -- the diverse aspects of integrated thin-film LN photonics, including the materials, basic passive components, and various active devices based on electro-optics, all-optical nonlinearities, and acousto-optics. We also identify challenges that this platform is currently facing and point out future opportunities. The field of integrated LNOI photonics is advancing rapidly and poised to make critical impacts on a broad range of applications in communication, signal processing, and quantum information.

physics.optics↗

arXiv2020

Nonreciprocal Transmission of Microwave Acoustic Waves in Nonlinear Parity-Time Symmetric Resonators

Acoustic waves have emerged as versatile on-chip information carriers with applications ranging from microwave filters to transducers. Nonreciprocal devices are desirable for the control and routing of high-frequency phonons. This is challenging, however, due to the linear response of most acoustic systems. Here, we leverage the strong piezoelectricity of lithium niobate to demonstrate fully tunable gain, loss, and nonlinearity for surface acoustic waves using electric circuitry. This allows the construction of a nonlinear acoustic parity-time-symmetric system and enables nonreciprocal transmission. We achieve a nonreciprocity of 10 decibels for a 200-MHz acoustic wave at a low input power of 3 $μ$W and further demonstrate one-way circulation of acoustic waves by cascading nonreciprocal devices. Our work illustrates the potential of this piezoelectric platform for on-chip phononic processing and exploration of non-Hermitian physics.

physics.app-ph↗

arXiv2020

Reconfigurable electro-optic frequency shifter

Here we demonstrate an on-chip electro-optic frequency shifter that is precisely controlled using only a single-tone microwave signal. This is accomplished by engineering the density of states of, and coupling between, optical modes in ultra-low loss electro-optic waveguides and resonators realized in lithium niobate nanophotonics. Our device provides frequency shifts as high as 28 GHz with measured shift efficiencies of ~99% and insertion loss of <0.5 dB. Importantly, the device can be reconfigured as a tunable frequency-domain beam splitter, in which the splitting ratio and splitting frequency are controlled by microwave power and frequency, respectively. Using the device, we also demonstrate (non-blocking) frequency routing through an efficient exchange of information between two distinct frequency channels, i.e. swap operation. Finally, we show that our scheme can be scaled to achieve cascaded frequency shifts beyond 100 GHz. Our device could become an essential building-block for future high-speed and large-scale classical information processors as well as emerging frequency-domain photonic quantum computers.

physics.optics↗

arXiv2020

Integrated microwave acousto-optic frequency shifter on thin-film lithium niobate

Electrically driven acousto-optic devices that provide beam deflection and optical frequency shifting have broad applications from pulse synthesis to heterodyne detection. Commercially available acousto-optic modulators are based on bulk materials and consume Watts of radio frequency power. Here, we demonstrate an integrated 3-GHz acousto-optic frequency shifter on thin-film lithium niobate, featuring a carrier suppression over 30 dB. Further, we demonstrate a gigahertz-spaced optical frequency comb featuring more than 200 lines over a 0.6-THz optical bandwidth by recirculating the light in an active frequency shifting loop. Our integrated acousto-optic platform leads to the development of on-chip optical routing, isolation, and microwave signal processing.

physics.app-ph↗

arXiv2019

Electrically tunable valley dynamics in twisted WSe$_2$/WSe$_2$ bilayers

The twist degree of freedom provides a powerful new tool for engineering the electrical and optical properties of van der Waals heterostructures. Here, we show that the twist angle can be used to control the spin-valley properties of transition metal dichalcogenide bilayers by changing the momentum alignment of the valleys in the two layers. Specifically, we observe that the interlayer excitons in twisted WSe$_2$/WSe$_2$ bilayers exhibit a high (>60%) degree of circular polarization (DOCP) and long valley lifetimes (>40 ns) at zero electric and magnetic fields. The valley lifetime can be tuned by more than three orders of magnitude via electrostatic doping, enabling switching of the DOCP from ~80% in the n-doped regime to <5% in the p-doped regime. These results open up new avenues for tunable chiral light-matter interactions, enabling novel device schemes that exploit the valley degree of freedom.

cond-mat.mes-hall↗

arXiv2019

Coherent Acoustic Control of a Single Silicon Vacancy Spin in Diamond

Phonons are considered to be universal quantum transducers due to their ability to couple to a wide variety of quantum systems. Among these systems, solid-state point defect spins are known for being long-lived optically accessible quantum memories. Recently, it has been shown that inversion-symmetric defects in diamond, such as the negatively charged silicon vacancy center (SiV), feature spin qubits that are highly susceptible to strain. Here, we leverage this strain response to achieve coherent and low-power acoustic control of a single SiV spin, and perform acoustically driven Ramsey interferometry of a single spin. Our results demonstrate a novel and efficient method of spin control for these systems, offering a path towards strong spin-phonon coupling and phonon-mediated hybrid quantum systems.

quant-ph↗

arXiv2019

Microwave-to-optical conversion using lithium niobate thin-film acoustic resonators

We demonstrate conversion of up to 4.5 GHz-frequency microwaves to 1500 nm-wavelength light using optomechanical interactions on suspended thin-film lithium niobate. Our method utilizes an interdigital transducer that drives a free-standing 100 $μ$m-long thin-film acoustic resonator to modulate light travelling in a Mach-Zehnder interferometer or racetrack cavity. Owing to the strong microwave-to-acoustic coupling offered by the transducer in conjunction with the strong photoelastic, piezoelectric, and electro-optic effects of lithium niobate, we achieve a half-wave voltage of $V_π$ = 4.6 V and $V_π$ = 0.77 V for the Mach-Zehnder interferometer and racetrack resonator, respectively. The acousto-optic racetrack cavity exhibits an optomechancial single-photon coupling strength of 1.1 kHz. Our integrated nanophotonic platform coherently leverages the compelling properties of lithium niobate to achieve microwave-to-optical transduction. To highlight the versatility of our system, we also demonstrate a lossless microwave photonic link, which refers to a 0 dB microwave power transmission over an optical channel.

physics.app-ph↗

arXiv2019

Phononic band structure engineering for high-Q gigahertz surface acoustic wave resonators on lithium niobate

Phonons at gigahertz frequencies interact with electrons, photons, and atomic systems in solids, and therefore have extensive applications in signal processing, sensing, and quantum technologies. Surface acoustic wave (SAW) resonators that confine surface phonons can play a crucial role in such integrated phononic systems due to small mode size, low dissipation, and efficient electrical transduction. To date, it has been challenging to achieve high quality (Q) factor and small phonon mode size for SAW resonators at gigahertz frequencies. Here, we present a methodology to design compact high-Q SAW resonators on lithium niobate operating at gigahertz frequencies. We experimentally verify out designs and demonstrate Q factors in excess of $2\times10^4$ at room temperature ($6\times10^4$ at 4 Kelvin) and mode area as low as $1.87 λ^2$. This is achieved by phononic band structure engineering, which provides high confinement with low mechanical loss. The frequency-Q products (fQ) of our SAW resonators are greater than $10^{13}$. These high-fQ and small mode size SAW resonators could enable applications in quantum phononics and integrated hybrid systems with phonons, photons, and solid-state qubits.

cond-mat.mes-hall↗

arXiv2019

An integrated low-voltage broadband lithium niobate phase modulator

Electro-optic phase modulators are critical components in modern communication, microwave photonic, and quantum photonic systems. Important for these applications is to achieve modulators with low half-wave voltage at high frequencies. Here we demonstrate an integrated phase modulator, based on a thin-film lithium niobate platform, that simultaneously features small on-chip loss (~ 1 dB) and low half-wave voltage over a large spectral range (3.5 - 4.5 V at 5 - 40 GHz). By driving the modulator with a strong 30-GHz microwave signal corresponding to around four half-wave voltages, we generate an optical frequency comb consisting of over 40 sidebands spanning 10 nm in the telecom L-band. The high electro-optic performance combined with the high RF power-handling ability (3.1 W) of our integrated phase modulator are crucial for future photonics and microwave systems.

physics.app-ph↗

arXiv2019

Quantum interference of electromechanically stabilized emitters in nanophotonic devices

Photon-mediated coupling between distant matter qubits may enable secure communication over long distances, the implementation of distributed quantum computing schemes, and the exploration of new regimes of many-body quantum dynamics. Nanophotonic devices coupled to solid-state quantum emitters represent a promising approach towards realization of these goals, as they combine strong light-matter interaction and high photon collection efficiencies. However, the scalability of these approaches is limited by the frequency mismatch between solid-state emitters and the instability of their optical transitions. Here we present a nano-electromechanical platform for stabilization and tuning of optical transitions of silicon-vacancy (SiV) color centers in diamond nanophotonic devices by dynamically controlling their strain environments. This strain-based tuning scheme has sufficient range and bandwidth to alleviate the spectral mismatch between individual SiV centers. Using strain, we ensure overlap between color center optical transitions and observe an entangled superradiant state by measuring correlations of photons collected from the diamond waveguide. This platform for tuning spectrally stable color centers in nanophotonic waveguides and resonators constitutes an important step towards a scalable quantum network.

physics.app-ph↗