Searcharxiv⌕ Search

arXiv subjects

Linfang Wang

Publications and source records attributed to Linfang Wang.

14 recordsLinked to original sources
arXiv2023

LDPC Decoding with Degree-Specific Neural Message Weights and RCQ Decoding

Recently, neural networks have improved MinSum message-passing decoders for low-density parity-check (LDPC) codes by multiplying or adding weights to the messages, where the weights are determined by a neural network. The neural network complexity to determine distinct weights for each edge is high, often limiting the application to relatively short LDPC codes. Furthermore, storing separate weights for every edge and every iteration can be a burden for hardware implementations. To reduce neural network complexity and storage requirements, this paper proposes a family of weight-sharing schemes that use the same weight for edges that have the same check node degree and/or variable node degree. Our simulation results show that node-degree-based weight-sharing can deliver the same performance requiring distinct weights for each node. This paper also combines these degree-specific neural weights with a reconstruction-computation-quantization (RCQ) decoder to produce a weighted RCQ (W-RCQ) decoder. The W-RCQ decoder with node-degree-based weight sharing has a reduced hardware requirement compared with the original RCQ decoder. As an additional contribution, this paper identifies and resolves a gradient explosion issue that can arise when training neural LDPC decoders.

eess.SP↗
arXiv2023

ELF Codes: Concatenated Codes with an Expurgating Linear Function as the Outer Code

An expurgating linear function (ELF) is a linear outer code that disallows the low-weight codewords of the inner code. ELFs can be designed either to maximize the minimum distance or to minimize the codeword error rate (CER) of the expurgated code. A list-decoding sieve of the inner code starting from the noiseless all-zeros codeword is an efficient way to identify ELFs that maximize the minimum distance of the expurgated code. For convolutional inner codes, this paper provides distance spectrum union (DSU) upper bounds on the CER of the concatenated code. For short codeword lengths, ELFs transform a good inner code into a great concatenated code. For a constant message size of $K=64$ bits or constant codeword blocklength of $N=152$ bits, an ELF can reduce the gap at CER $10^{-6}$ between the DSU and the random-coding union (RCU) bounds from over 1 dB for the inner code alone to 0.23 dB for the concatenated code. The DSU bounds can also characterize puncturing that mitigates the rate overhead of the ELF while maintaining the DSU-to-RCU gap. The reduction in DSU-to-RCU gap comes with a minimal increase in average complexity at desired CER operating points. List Viterbi decoding guided by the ELF approaches maximum likelihood (ML) decoding of the concatenated code, and average list size converges to 1 as SNR increases. Thus, average complexity is similar to Viterbi decoding on the trellis of the inner code at high SNR. For rare large-magnitude noise events, which occur less often than the FER of the inner code, a deep search in the list finds the ML codeword.

cs.IT↗
arXiv2022

Reconstruction-Computation-Quantization (RCQ): A Paradigm for Low Bit Width LDPC Decoding

This paper uses the reconstruction-computation-quantization (RCQ) paradigm to decode low-density parity-check (LDPC) codes. RCQ facilitates dynamic non-uniform quantization to achieve good frame error rate (FER) performance with very low message precision. For message-passing according to a flooding schedule, the RCQ parameters are designed by discrete density evolution (DDE). Simulation results on an IEEE 802.11 LDPC code show that for 4-bit messages, a flooding MinSum RCQ decoder outperforms table-lookup approaches such as information bottleneck (IB) or Min-IB decoding, with significantly fewer parameters to be stored. Additionally, this paper introduces layer-specific RCQ (LS-RCQ), an extension of RCQ decoding for layered architectures. LS-RCQ uses layer-specific message representations to achieve the best possible FER performance. For LS-RCQ, this paper proposes using layered DDE featuring hierarchical dynamic quantization (HDQ) to design LS-RCQ parameters efficiently. Finally, this paper studies field-programmable gate array (FPGA) implementations of RCQ decoders. Simulation results for a (9472, 8192) quasi-cyclic (QC) LDPC code show that a layered MinSum RCQ decoder with 3-bit messages achieves more than a $10\%$ reduction in LUTs and routed nets and more than a $6\%$ decrease in register usage while maintaining comparable decoding performance, compared to a 5-bit offset MinSum decoder.

eess.SP↗
arXiv2021

Achieving Short-Blocklength RCU bound via CRC List Decoding of TCM with Probabilistic Shaping

This paper applies probabilistic amplitude shaping (PAS) to a cyclic redundancy check (CRC) aided trellis coded modulation (TCM) to achieve the short-blocklength random coding union (RCU) bound. In the transmitter, the equally likely message bits are first encoded by distribution matcher to generate amplitude symbols with the desired distribution. The binary representations of the distribution matcher outputs are then encoded by a CRC. Finally, the CRC-encoded bits are encoded and modulated by Ungerboeck's TCM scheme, which consists of a $\frac{k_0}{k_0+1}$ systematic tail-biting convolutional code and a mapping function that maps coded bits to channel signals with capacity-achieving distribution. This paper proves that, for the proposed transmitter, the CRC bits have uniform distribution and that the channel signals have symmetric distribution. In the receiver, the serial list Viterbi decoding (S-LVD) is used to estimate the information bits. Simulation results show that, for the proposed CRC-TCM-PAS system with 87 input bits and 65-67 8-AM coded output symbols, the decoding performance under additive white Gaussian noise channel achieves the RCU bound with properly designed CRC and convolutional codes.

cs.IT↗
arXiv2021

Neural Normalized Min-Sum Message-Passing vs. Viterbi Decoding for the CCSDS Line Product Code

The Consultative Committee for Space Data Systems (CCSDS) 141.11-O-1 Line Product Code (LPC) provides a rare opportunity to compare maximum-likelihood decoding and message passing. The LPC considered in this paper is intended to serve as the inner code in conjunction with a (255,239) Reed Solomon (RS) code whose symbols are bytes of data. This paper represents the 141.11-O-1 LPC as a bipartite graph and uses that graph to formulate both maximum likelihood (ML) and message passing algorithms. ML decoding must, of course, have the best frame error rate (FER) performance. However, a fixed point implementation of a Neural-Normalized MinSum (N-NMS) message passing decoder closely approaches ML performance with a significantly lower complexity.

cs.IT↗
arXiv2021

Neural-Network-Optimized Degree-Specific Weights for LDPC MinSum Decoding

Neural Normalized MinSum (N-NMS) decoding delivers better frame error rate (FER) performance on linear block codes than conventional normalized MinSum (NMS) by assigning dynamic multiplicative weights to each check-to-variable message in each iteration. Previous N-NMS efforts have primarily investigated short-length block codes (N < 1000), because the number of N-NMS parameters to be trained is proportional to the number of edges in the parity check matrix and the number of iterations, which imposes am impractical memory requirement when Pytorch or Tensorflow is used for training. This paper provides efficient approaches to training parameters of N-NMS that support N-NMS for longer block lengths. Specifically, this paper introduces a family of neural 2-dimensional normalized (N-2D-NMS) decoders with with various reduced parameter sets and shows how performance varies with the parameter set selected. The N-2D-NMS decoders share weights with respect to check node and/or variable node degree. Simulation results justify this approach, showing that the trained weights of N-NMS have a strong correlation to the check node degree, variable node degree, and iteration number. Further simulation results on the (3096,1032) protograph-based raptor-like (PBRL) code show that N-2D-NMS decoder can achieve the same FER as N-NMS with significantly fewer parameters required. The N-2D-NMS decoder for a (16200,7200) DVBS-2 standard LDPC code shows a lower error floor than belief propagation. Finally, a hybrid decoding structure combining a feedforward structure with a recurrent structure is proposed in this paper. The hybrid structure shows similar decoding performance to full feedforward structure, but requires significantly fewer parameters.

cs.IT↗
arXiv2021

FasterPose: A Faster Simple Baseline for Human Pose Estimation

The performance of human pose estimation depends on the spatial accuracy of keypoint localization. Most existing methods pursue the spatial accuracy through learning the high-resolution (HR) representation from input images. By the experimental analysis, we find that the HR representation leads to a sharp increase of computational cost, while the accuracy improvement remains marginal compared with the low-resolution (LR) representation. In this paper, we propose a design paradigm for cost-effective network with LR representation for efficient pose estimation, named FasterPose. Whereas the LR design largely shrinks the model complexity, yet how to effectively train the network with respect to the spatial accuracy is a concomitant challenge. We study the training behavior of FasterPose, and formulate a novel regressive cross-entropy (RCE) loss function for accelerating the convergence and promoting the accuracy. The RCE loss generalizes the ordinary cross-entropy loss from the binary supervision to a continuous range, thus the training of pose estimation network is able to benefit from the sigmoid function. By doing so, the output heatmap can be inferred from the LR features without loss of spatial accuracy, while the computational cost and model size has been significantly reduced. Compared with the previously dominant network of pose estimation, our method reduces 58% of the FLOPs and simultaneously gains 1.3% improvement of accuracy. Extensive experiments show that FasterPose yields promising results on the common benchmarks, i.e., COCO and MPII, consistently validating the effectiveness and efficiency for practical utilization, especially the low-latency and low-energy-budget applications in the non-GPU scenarios.

cs.CV↗
arXiv2021

FPGA Implementations of Layered MinSum LDPC Decoders Using RCQ Message Passing

Non-uniform message quantization techniques such as reconstruction-computation-quantization (RCQ) improve error-correction performance and decrease hardware complexity of low-density parity-check (LDPC) decoders that use a flooding schedule. Layered MinSum RCQ (L-msRCQ) enables message quantization to be utilized for layered decoders and irregular LDPC codes. We investigate field-programmable gate array (FPGA) implementations of L-msRCQ decoders. Three design methods for message quantization are presented, which we name the Lookup, Broadcast, and Dribble methods. The decoding performance and hardware complexity of these schemes are compared to a layered offset MinSum (OMS) decoder. Simulation results on a (16384, 8192) protograph-based raptor-like (PBRL) LDPC code show that a 4-bit L-msRCQ decoder using the Broadcast method can achieve a 0.03 dB improvement in error-correction performance while using 12% fewer registers than the OMS decoder. A Broadcast-based 3-bit L-msRCQ decoder uses 15% fewer lookup tables, 18% fewer registers, and 13% fewer routed nets than the OMS decoder, but results in a 0.09 dB loss in performance.

eess.SP↗
arXiv2020

Products-10K: A Large-scale Product Recognition Dataset

With the rapid development of electronic commerce, the way of shopping has experienced a revolutionary evolution. To fully meet customers' massive and diverse online shopping needs with quick response, the retailing AI system needs to automatically recognize products from images and videos at the stock-keeping unit (SKU) level with high accuracy. However, product recognition is still a challenging task, since many of SKU-level products are fine-grained and visually similar by a rough glimpse. Although there are already some products benchmarks available, these datasets are either too small (limited number of products) or noisy-labeled (lack of human labeling). In this paper, we construct a human-labeled product image dataset named "Products-10K", which contains 10,000 fine-grained SKU-level products frequently bought by online customers in JD.com. Based on our new database, we also introduced several useful tips and tricks for fine-grained product recognition. The products-10K dataset is available via https://products-10k.github.io/.

cs.CV↗
arXiv2020

Finite-Support Capacity-Approaching Distributions for AWGN Channels

In this paper, the Dynamic-Assignment Blahut-Arimoto (DAB) algorithm identifies finite-support probability mass functions (PMFs) with small cardinality that achieve capacity for amplitude-constrained (AC) Additive White Gaussian Noise (AWGN) Channels, or approach capacity to within less than 1% for power-constrained (PC) AWGN Channels. While a continuous Gaussian PDF is well-known to be a theoretical capacity-achieving distribution for the PC-AWGN channel, DAB identifies PMFs with small-cardinality that are, for practical purposes, indistinguishable in performance. We extend the results of Ozarow and Wyner that require a constellation cardinality of $2^{C+1}$ to approach capacity C to within the shaping loss. PMF's found by DAB approach capacity with essentially no shaping loss with constellation cardinality of $2^{C+1.2}$. For AC-AWGN channels, DAB characterizes the evolution of minimum-cardinality finite-support capacity-achieving PMFs.

cs.IT↗
arXiv2020

An Efficient Algorithm for Designing Optimal CRCs for Tail-Biting Convolutional Codes

Cyclic redundancy check (CRC) codes combined with convolutional codes yield a powerful concatenated code that can be efficiently decoded using list decoding. To help design such systems, this paper presents an efficient algorithm for identifying the distance-spectrum-optimal (DSO) CRC polynomial for a given tail-biting convolutional code (TBCC) when the target undetected error rate (UER) is small. Lou et al. found that the DSO CRC design for a given zero-terminated convolutional code under low UER is equivalent to maximizing the undetected minimum distance (the minimum distance of the concatenated code). This paper applies the same principle to design the DSO CRC for a given TBCC under low target UER. Our algorithm is based on partitioning the tail-biting trellis into several disjoint sets of tail-biting paths that are closed under cyclic shifts. This paper shows that the tail-biting path in each set can be constructed by concatenating the irreducible error events (IEEs) and circularly shifting the resultant path. This motivates an efficient collection algorithm that aims at gathering IEEs, and a search algorithm that reconstructs the full list of error events with bounded distance of interest, which can be used to find the DSO CRC. Simulation results show that DSO CRCs can significantly outperform suboptimal CRCs in the low UER regime.

cs.IT↗
arXiv2020

A Reconstruction-Computation-Quantization (RCQ) Approach to Node Operations in LDPC Decoding

In this paper, we propose a finite-precision decoding method that features the three steps of Reconstruction, Computation, and Quantization (RCQ). Unlike Mutual-Information-Maximization Quantized Belief Propagation (MIM-QBP), RCQ can approximate either belief propagation or Min-Sum decoding. One problem faced by MIM-QBP decoder is that it cannot work well when the fraction of degree-2 variable nodes is large. However, sometimes a large fraction of degree-2 variable nodes is necessary for a fast encoding structure, as seen in the IEEE 802.11 standard and the DVB-S2 standard. In contrast, the proposed RCQ decoder may be applied to any off-the-shelf LDPC code, including those with a large fraction of degree-2 variable nodes.Our simulations show that a 4-bit Min-Sum RCQ decoder delivers frame error rate (FER) performance around 0.1dB of full-precision belief propagation (BP) for the IEEE 802.11 standard LDPC code in the low SNR region.The RCQ decoder actually outperforms full-precision BP in the high SNR region because it overcomes elementary trapping sets that create an error floor under BP decoding. This paper also introduces Hierarchical Dynamic Quantization (HDQ) to design the non-uniform quantizers required by RCQ decoders. HDQ is a low-complexity design technique that is slightly sub-optimal. Simulation results comparing HDQ and an optimal quantizer on the symmetric binary-input memoryless additive white Gaussian noise channel show a loss in mutual information between these two quantizers of less than $10^{-6}$ bits, which is negligible for practical applications.

eess.SP↗
arXiv2019

Information Bottleneck Decoding of Rate-Compatible 5G-LDPC Codes

The new 5G communications standard increases data rates and supports low-latency communication that places constraints on the computational complexity of channel decoders. 5G low-density parity-check (LDPC) codes have the so-called protograph-based raptor-like (PBRL) structure which offers inherent rate-compatibility and excellent performance. Practical LDPC decoder implementations use message-passing decoding with finite precision, which becomes coarse as complexity is more severely constrained. Performance degrades as the precision becomes more coarse. Recently, the information bottleneck (IB) method was used to design mutual-information-maximizing lookup tables that replace conventional finite-precision node computations. Additionally, the IB approach exchanges messages represented by integers with very small bit width. This paper extends the IB principle to the flexible class of PBRL LDPC codes as standardized in 5G. The extensions includes puncturing and rate-compatible IB decoder design. As an example of the new approach, a 4-bit information bottleneck decoder is evaluated for PBRL LDPC codes over a typical range of rates. Bit error rate simulations show that the proposed scheme outperforms offset min-sum decoding algorithms and operates within 0.2 dB of double-precision sum-product belief propagation decoding.

eess.SP↗