SearcharxivSearch

arXiv subjects

Ling Hao

Publications and source records attributed to Ling Hao.

7 recordsLinked to original sources

Parametric amplification in a Kerr Oscillator based on Ne FIB Nanobridges

Superconducting circuits play a crucial role in the advancement of quantum computing and quantum sensing. Typically such circuits require the presence of a non-linear element, where the engineered anharmonicity (Kerr factor) and resonant linewidth determine the potential applications of the circuit. In this work we have fabricated Nb-based CPW resonators embedded with a DC SQUID incorporating Nb nanobridges as the weak links. We use two-tone spectroscopy to study the non-linear behaviour of the device at 15 mK up to a field of 2.48 mT. Under the application of a blue-detuned pump, the device shows a decrease in the resonant frequency which is used to estimate the Kerr factor. We further apply a red-detuned pump to go beyond the bifurcation threshold and observe the appearance of an additional idler mode with net gain. The gain of the device was maximized by further decreasing the pump frequency, showing a maximum amplification of 15 dB. Finally, we show agreement between the Kerr non-linear oscillator model and the measured transmission spectrum, and highlight further design modifications to improve the gain and bandwidth of such devices.

quant-ph

Millikelvin Nb nanoSQUID-embedded tuneable resonator fabricated with a neon focused-ion-beam

SQUID-embedded superconducting resonators are of great interest due to their potential for coupling highly scalable superconducting circuits with quantum memories based on solid-state spin ensembles. Such an application requires a high-$Q$, frequency-tuneable resonator which is both resilient to magnetic field, and able to operate at millikelvin temperatures. These requirements motivate the use of a higher $H_{c}$ metal such as niobium, however the challenge then becomes to sufficiently reduce the operating temperature. We address this by presenting a monolithic Nb nanoSQUID-embedded resonator, where neon focused-ion-beam fabrication of the nanoSQUID results in a device displaying frequency tuneability at $T = 16$ mK. In order to assess the applicability of the device for coupling to small spin clusters, we characterise the flux sensitivity as a function of microwave drive power and externally applied magnetic field, and find that the noise is dominated by dielectric noise in the resonator. Finally, we discuss improvements to the device design which can dramatically improve the flux sensitivity, which highlights the promise of Nb SQUID-embedded resonators for hybrid superconductor-spin applications.

quant-ph

Josephson penetration depth in coplanar junctions based on 2D materials

Josephson junctions and SQUIDs with graphene or other 2D materials as the weak link between superconductors have become a hot topic of research in recent years, with respect to both fundamental physics and potential applications. We have previously reported ultra-wide Josephson junctions (up to 80 μm wide) based on CVD graphene where the critical current was found to be uniformly distributed in the direction perpendicular to the current. In this paper, we demonstrate that the unusually large Josephson penetration depth λ_J that this corresponds to is enabled by the unique geometric structure of Josephson junctions based on 2D materials. We derive a new expression for the Josephson penetration depth of such junctions and verify our assumptions by numerical simulations.

cond-mat.supr-con

Ballistic Josephson junctions based on CVD graphene

Josephson junctions with graphene as the weak link between superconductors have been intensely studied in recent years, with respect to both fundamental physics and potential applications. However, most of the previous work was based on mechanically exfoliated graphene, which is not compatible with mass production. Here we present our research using graphene grown by chemical vapour deposition (CVD) as the weak link of Josephson junctions. We demonstrate that CVD-graphene-based Josephson junctions with Nb electrodes can work effectively without any thermal hysteresis from 1.5 K down to a base temperature of 320 mK, and they show an ideal Fraunhofer-like interference pattern in a perpendicular magnetic field. We also show that the critical current of the junction can be tuned by a gate voltage. Furthermore, for our shortest junctions (50 nm in length), we find that the normal state resistance oscillates with the gate voltage, indicating that the junctions are in the ballistic regime, a feature not previously observed in CVD-graphene-based Josephson junctions.

cond-mat.supr-con

Microwave Power, DC Magnetic Field, Frequency and Temperature Dependence of the Surface Resistance of MgB2

The microwave power, dc magnetic field, frequency and temperature dependence of the surface resistance of MgB2 films and powder samples were studied. Sample quality is relatively easy to identify by a number of characteristics, the most clear being the breakdown in the omega squared law for poor quality samples. Analysis of the experimental data suggests the most attractive procedure for high quality film growth for technical applications.

cond-mat.supr-con

Temperature dependence of the microwave surface impedance measured on different kinds of MgB$_2$ samples

In this paper we present the results of measurements of the microwave surface impedance of a powder sample and two films of MgB$_2$. One film has $T_c=30$ K and is not textured, the other is partially c-axis orientated with $T_c=38$ K. These samples show different types of temperature dependence of the field penetration depth: linear for the powder sample, exponential with $Δ/kT_c<1.76$ (film with $T_c=30$ K) and strong coupling behaviour with $Δ/kT_c\sim 2.25$ (film with $T_c=38$ K). The results are well described in terms of an anisotropic gap model or presence of a slightly deficient MgB$_2$ phase. The data set for all samples - taken as a whole cannot be fitted into a two gap scenario.

cond-mat.supr-con

Microwave Surface Resistance in MgB2

Measurements of the temperature dependence of the surface resistance at 3 GHz of 100 micron size grains of MgB_2 separated powder are presented and discussed. The microwave surface resistance data is compared to experimental results of Nb, Bi_2Sr_2CaCu_2O_{8+δ} (BSCCO) and theoretical predictions of s-wave weak coupling electron-phonon theory (BCS).

cond-mat.supr-con