arXiv subjects

Lingxiao Meng

Publications and source records attributed to Lingxiao Meng.

7 recordsLinked to original sources

arXiv2026

Impedance Control of Ship-Borne Manipulators via Optimization-based Task-Space Inverse Dynamics

Ship-borne manipulators operating in maritime environments are subject to stochastic wave-induced base motions that introduce kinematic disturbances and dynamic coupling, degrading trajectory tracking accuracy and complicating safe, contact-rich manipulation. This paper proposes a torque-level optimization-based control framework that integrates high-precision trajectory tracking with task-space impedance for ship-borne manipulators. The controller is formulated using task-space inverse dynamics (TSID) and solved via quadratic programming to explicitly compensate for the dynamic coupling introduced by base motion. To enable accurate feedforward compensation, an error-state Kalman filter (ESKF) is developed to estimate the base state by fusing inertial measurements with end-effector pose feedback. The framework is validated in simulation and real-world experiments using a 7-DOF manipulator mounted on a 6-DOF Stewart platform. The proposed method reduces real-world end-effector position tracking error by over 25.7% compared with the best baseline. Furthermore, the controller enables dynamic peg-in-hole insertion with 1~mm clearance under base motion, increasing the success rate while reducing average contact forces by 45%, demonstrating precise and compliant manipulation in contact-rich environments.

cs.RO↗

arXiv2025

Selective Densification for Rapid Motion Planning in High Dimensions with Narrow Passages

Sampling-based algorithms are widely used for motion planning in high-dimensional configuration spaces. However, due to low sampling efficiency, their performance often diminishes in complex configuration spaces with narrow corridors. Existing approaches address this issue using handcrafted or learned heuristics to guide sampling toward useful regions. Unfortunately, these strategies often lack generalizability to various problems or require extensive prior training. In this paper, we propose a simple yet efficient sampling-based planning framework along with its bidirectional version that overcomes these issues by integrating different levels of planning granularity. Our approach probes configuration spaces with uniform random samples at varying resolutions and explores these multi-resolution samples online with a bias towards sparse samples when traveling large free configuration spaces. By seamlessly transitioning between sparse and dense samples, our approach can navigate complex configuration spaces while maintaining planning speed and completeness. The simulation results demonstrate that our approach outperforms several state-of-the-art sampling-based planners in $\mathbb{SE}(2)$, $\mathbb{SE}(3)$, and $\mathbb{R}^{14}$ with challenging terrains. Furthermore, experiments conducted with the Franka Emika Panda robot operating in a constrained workspace provide additional evidence of the superiority of the proposed method.

cs.RO↗

arXiv2024

Collaborative Fall Detection and Response using Wi-Fi Sensing and Mobile Companion Robot

This paper presents a collaborative fall detection and response system integrating Wi-Fi sensing with robotic assistance. The proposed system leverages channel state information (CSI) disruptions caused by movements to detect falls in non-line-of-sight (NLOS) scenarios, offering non-intrusive monitoring. Besides, a companion robot is utilized to provide assistance capabilities to navigate and respond to incidents autonomously, improving efficiency in providing assistance in various environments. The experimental results demonstrate the effectiveness of the proposed system in detecting falls and responding effectively.

cs.RO↗

arXiv2024

Autonomous Multiple-Trolley Collection System with Nonholonomic Robots: Design, Control, and Implementation

The intricate and multi-stage task in dynamic public spaces like luggage trolley collection in airports presents both a promising opportunity and an ongoing challenge for automated service robots. Previous research has primarily focused on handling a single trolley or individual functional components, creating a gap in providing cost-effective and efficient solutions for practical scenarios. In this paper, we propose a mobile manipulation robot incorporated with an autonomy framework for the collection and transportation of multiple trolleys that can significantly enhance operational efficiency. We address the key challenges in the trolley collection problem through the novel design of the mechanical system and the vision-based control strategy. We design a lightweight manipulator and docking mechanism, optimized for the sequential stacking and transportation of multiple trolleys. Additionally, based on the Control Lyapunov Function and Control Barrier Function, we propose a novel vision-based control with the online Quadratic Programming which significantly improves the accuracy and efficiency of the collection process. The practical application of our system is demonstrated in real world scenarios, where it successfully executes multiple-trolley collection tasks.

cs.RO↗

arXiv2023

FabricFolding: Learning Efficient Fabric Folding without Expert Demonstrations

Autonomous fabric manipulation is a challenging task due to complex dynamics and potential self-occlusion during fabric handling. An intuitive method of fabric folding manipulation first involves obtaining a smooth and unfolded fabric configuration before the folding process begins. However, the combination of quasi-static actions such as pick & place and dynamic action like fling proves inadequate in effectively unfolding long-sleeved T-shirts with sleeves mostly tucked inside the garment. To address this limitation, this paper introduces an improved quasi-static action called pick & drag, specifically designed to handle this type of fabric configuration. Additionally, an efficient dual-arm manipulation system is designed in this paper, which combines quasi-static (including pick & place and pick & drag) and dynamic fling actions to flexibly manipulate fabrics into unfolded and smooth configurations. Subsequently, keypoints of the fabric are detected, enabling autonomous folding. To address the scarcity of publicly available keypoint detection datasets for real fabric, we gathered images of various fabric configurations and types in real scenes to create a comprehensive keypoint dataset for fabric folding. This dataset aims to enhance the success rate of keypoint detection. Moreover, we evaluate the effectiveness of our proposed system in real-world settings, where it consistently and reliably unfolds and folds various types of fabrics, including challenging situations such as long-sleeved T-shirts with most parts of sleeves tucked inside the garment. Specifically, our method achieves a coverage rate of 0.822 and a success rate of 0.88 for long-sleeved T-shirts folding.

cs.RO↗

arXiv2023

Virtual Reality Based Robot Teleoperation via Human-Scene Interaction

Robot teleoperation gains great success in various situations, including chemical pollution rescue, disaster relief, and long-distance manipulation. In this article, we propose a virtual reality (VR) based robot teleoperation system to achieve more efficient and natural interaction with humans in different scenes. A user-friendly VR interface is designed to help users interact with a desktop scene using their hands efficiently and intuitively. To improve user experience and reduce workload, we simulate the process in the physics engine to help build a preview of the scene after manipulation in the virtual scene before execution. We conduct experiments with different users and compare our system with a direct control method across several teleoperation tasks. The user study demonstrates that the proposed system enables users to perform operations more instinctively with a lighter mental workload. Users can perform pick-and-place and object-stacking tasks in a considerably short time, even for beginners. Our code is available at https://github.com/lingxiaomeng/VR_Teleoperation_Gen3.

cs.RO↗

arXiv2023

Task-Oriented Grasp Prediction with Visual-Language Inputs

To perform household tasks, assistive robots receive commands in the form of user language instructions for tool manipulation. The initial stage involves selecting the intended tool (i.e., object grounding) and grasping it in a task-oriented manner (i.e., task grounding). Nevertheless, prior researches on visual-language grasping (VLG) focus on object grounding, while disregarding the fine-grained impact of tasks on object grasping. Task-incompatible grasping of a tool will inevitably limit the success of subsequent manipulation steps. Motivated by this problem, this paper proposes GraspCLIP, which addresses the challenge of task grounding in addition to object grounding to enable task-oriented grasp prediction with visual-language inputs. Evaluation on a custom dataset demonstrates that GraspCLIP achieves superior performance over established baselines with object grounding only. The effectiveness of the proposed method is further validated on an assistive robotic arm platform for grasping previously unseen kitchen tools given the task specification. Our presentation video is available at: https://www.youtube.com/watch?v=e1wfYQPeAXU.

cs.RO↗