Searcharxiv⌕ Search

arXiv subjects

Lingyang Song

Publications and source records attributed to Lingyang Song.

At least 37 records · Page 2Linked to original sources

Split Fine-Tuning for Large Language Models in Wireless Networks

Fine-tuning is the process of adapting the pre-trained large language models (LLMs) for downstream tasks. Due to substantial parameters, fine-tuning LLMs on mobile devices demands considerable memory resources, and suffers from high communication overhead and long fine-tuning delay. In this paper, we propose an efficient LLM fine-tuning scheme in wireless networks, named Split Fine-Tuning (SFT), which can accommodate LLM fine-tuning on mobile devices. Specifically, an LLM is split into a server-side part on the edge server and a device-side part on the mobile device to satisfy the device-side memory constraint. All devices share a server-side model and perform parallel fine-tuning to reduce fine-tuning delay. In addition, to reduce significant communication overhead incurred by data exchange between devices and the edge server, we propose a data compression scheme by jointly leveraging sparsification, stochastic quantization, and lossless encoding methods. Furthermore, we formulate a fine-tuning delay minimization problem under accuracy and memory constraints, taking device heterogeneity and channel dynamics into account. To solve the problem, the nonlinear mixed-integer problem is decoupled into two subproblems in different timescales. The two-timescale resource management algorithm is proposed to jointly optimize the compression rate and transformer block allocation in the large timescale using the augmented Lagrangian method, and determine spectrum resource allocation in the small timescale via sequential quadratic programming. Extensive simulation results demonstrate that the proposed scheme can reduce the fine-tuning delay by up to 80.2% and communication overhead by 93.6% compared to state-of-the-art benchmarks, while satisfying device-side memory and model accuracy constraints.

cs.DC↗

Reconfigurable Holographic Surface: A New Paradigm for Ultra-Massive MIMO

Evolving from massive multiple-input multiple-output (MIMO) in current 5G communications, ultra-massive MIMO emerges as a seminal technology for fulfilling more stringent requirements of future 6G communications. However, widely-utilized phased arrays relying on active components make the implementation of ultra-massive MIMO in practice increasingly prohibitive from both cost and power consumption perspectives. In contrast, the development of reconfigurable holographic surface (RHS) provides a new paradigm to solve the above issue without the need of costly hardware components. By leveraging the holographic principle, the RHS serves as an ultra-thin and lightweight surface antenna integrated with the transceiver, which is a promising alternative to phased arrays for realizing ultra-massive MIMO. In this paper, we provide a comprehensive overview of the RHS, especially the RHS-aided communication and sensing. We first describe the basic concepts of RHS, and introduce its working principle and unique practical constraints. Moreover, we show how to utilize the RHS to achieve cost-efficient and high-performance wireless communication and sensing, and introduce the key technologies. In particular, we present the implementation of RHS with a wireless communication prototype, and report the experimental measurement results based on it. Finally, we outline some open challenges and potential future directions in this area.

cs.IT↗

Meta-Backscatter: A New ISAC Paradigm for Battery-Free Internet of Things

The meta-material sensor has been regarded as a next-generation sensing technology for the battery-free Internet of Things (IoT) due to its battery-free characteristic and improved sensing performance. The meta-material sensors function as backscatter tags that change their reflection coefficients with the conditions of sensing targets such as temperature and gas concentration, allowing transceivers to perform sensing by analyzing the reflected signals from the sensors. Simultaneously, the sensors also function as environmental scatterers, creating additional signal paths to enhance communication performance. Therefore, the meta-material sensor potentially provides a new paradigm of Integrated Sensing and Communication (ISAC) for the battery-free IoT system. In this article, we first propose a Meta-Backscatter system that utilizes meta-material sensors to achieve diverse sensing functionalities and improved communication performance. We begin with the introduction of the metamaterial sensor and further elaborate on the Meta-Backscatter system. Subsequently, we present optimization strategies for meta-material sensors, transmitters, and receivers to strike a balance between sensing and communication. Furthermore, this article provides a case study of the system and examines the feasibility and trade-off through the simulation results. Finally, potential extensions of the system and their related research challenges are addressed.

eess.SY↗

Intelligent Surfaces Empowered Wireless Network: Recent Advances and The Road to 6G

Intelligent surfaces (ISs) have emerged as a key technology to empower a wide range of appealing applications for wireless networks, due to their low cost, high energy efficiency, flexibility of deployment and capability of constructing favorable wireless channels/radio environments. Moreover, the recent advent of several new IS architectures further expanded their electromagnetic functionalities from passive reflection to active amplification, simultaneous reflection and refraction, as well as holographic beamforming. However, the research on ISs is still in rapid progress and there have been recent technological advances in ISs and their emerging applications that are worthy of a timely review. Thus, we provide in this paper a comprehensive survey on the recent development and advances of ISs aided wireless networks. Specifically, we start with an overview on the anticipated use cases of ISs in future wireless networks such as 6G, followed by a summary of the recent standardization activities related to ISs. Then, the main design issues of the commonly adopted reflection-based IS and their state-of-the-art solutions are presented in detail, including reflection optimization, deployment, signal modulation, wireless sensing, and integrated sensing and communications. Finally, recent progress and new challenges in advanced IS architectures are discussed to inspire futrue research.

cs.IT↗

Reconfigurable Holographic Surface Aided Wireless Simultaneous Localization and Mapping

As a crucial facilitator of future autonomous driving applications, wireless simultaneous localization and mapping (SLAM) has drawn growing attention recently. However, the accuracy of existing wireless SLAM schemes is limited because the antenna gain is constrained given the cost budget due to the expensive hardware components such as phase arrays. To address this issue, we propose a reconfigurable holographic surface (RHS)-aided SLAM system in this paper. The RHS is a novel type of low-cost antenna that can cut down the hardware cost by replacing phased arrays in conventional SLAM systems. However, compared with a phased array where the phase shifts of parallelfed signals are adjusted, the RHS exhibits a different radiation model because its amplitude-controlled radiation elements are series-fed by surface waves, implying that traditional schemes cannot be applied directly. To address this challenge, we propose an RHS-aided beam steering method for sensing the surrounding environment and design the corresponding SLAM algorithm. Simulation results show that the proposed scheme can achieve more than there times the localization accuracy that traditional wireless SLAM with the same cost achieves.

eess.SP↗

RIS-based IMT-2030 Testbed for MmWave Multi-stream Ultra-massive MIMO Communications

As one enabling technique of the future sixth generation (6G) network, ultra-massive multiple-input-multiple-output (MIMO) can support high-speed data transmissions and cell coverage extension. However, it is hard to realize the ultra-massive MIMO via traditional phased arrays due to unacceptable power consumption. To address this issue, reconfigurable intelligent surface-based (RIS-based) antennas are an energy-efficient enabler of the ultra-massive MIMO, since they are free of energy-hungry phase shifters. In this article, we report the performances of the RIS-enabled ultra-massive MIMO via a project called Verification of MmWave Multi-stream Transmissions Enabled by RIS-based Ultra-massive MIMO for 6G (V4M), which was proposed to promote the evolution towards IMT-2030. In the V4M project, we manufacture RIS-based antennas with 1024 one-bit elements working at 26 GHz, based on which an mmWave dual-stream ultra-massive MIMO prototype is implemented for the first time. To approach practical settings, the Tx and Rx of the prototype are implemented by one commercial new radio base station and one off-the-shelf user equipment, respectively. The measured data rate of the dual-stream prototype approaches the theoretical peak rate. Our contributions to the V4M project are also discussed by presenting technological challenges and corresponding solutions.

cs.IT↗

Towards Ubiquitous Positioning by Leveraging Reconfigurable Intelligent Surface

The received signal strength (RSS) based technique is widely utilized for ubiquitous positioning due to its advantage of simple implementability. However, its accuracy is limited because the RSS values of adjacent locations can be very difficult to distinguish. Against this background, we propose the novel RSS-based positioning scheme enabled by reconfigurable intelligent surface (RIS). By modifying the reflection coefficient of the RIS, the propagation channels are programmed in such a way that the differences between the RSS values of adjacent locations can be enlarged to improve the positioning accuracy. New challenge lies in the selection of suitable reflection coefficients for high-accuracy positioning. To tackle this challenge, we formulate the RIS-aided positioning problem and design an iterative algorithm to solve the problem. The effectiveness of the proposed positioning scheme is validated through simulations.

eess.SP↗

MetaRadar: Indoor Localization by Reconfigurable Metamaterials

Indoor localization has drawn much attention owing to its potential for supporting location based services. Among various indoor localization techniques, the received signal strength (RSS) based technique is widely researched. However, in conventional RSS based systems where the radio environment is unconfigurable, adjacent locations may have similar RSS values, which limits the localization precision. In this paper, we present MetaRadar, which explores reconfigurable radio reflection with a surface/plane made of metamaterial units for multi-user localization. By changing the reflectivity of metamaterial, MetaRadar modifies the radio channels at different locations, and improves localization accuracy by making RSS values at adjacent locations have significant differences. However, in MetaRadar, it is challenging to build radio maps for all the radio environments generated by metamaterial units and select suitable maps from all the possible maps to realize a high accuracy localization. To tackle this challenge, we propose a compressive construction technique which can predict all the possible radio maps, and propose a configuration optimization algorithm to select favorable metamaterial reflectivities and the corresponding radio maps. The experimental results show a significant improvement from a decimeter-level localization error in the traditional RSS-based systems to a centimeter-level one in MetaRadar.

eess.SP↗

MetaLocalization: Reconfigurable Intelligent Surface Aided Multi-user Wireless Indoor Localization

The received signal strength (RSS) based technique is extensively utilized for localization in the indoor environments. Since the RSS values of neighboring locations may be similar, the localization accuracy of the RSS based technique is limited. To tackle this problem, in this paper, we propose to utilize reconfigurable intelligent surface (RIS) for the RSS based multi-user localization. As the RIS is able to customize the radio channels by adjusting the phase shifts of the signals reflected at the surface, the localization accuracy in the RIS aided scheme can be improved by choosing the proper phase shifts with significant differences of RSS values among adjacent locations. However, it is challenging to select the optimal phase shifts because the decision function for location estimation and the phase shifts are coupled. To tackle this challenge, we formulate the optimization problem for the RIS-aided localization, derive the optimal decision function, and design the phase shift optimization (PSO) algorithm to solve the formulated problem efficiently. Analysis of the proposed RIS aided technique is provided, and the effectiveness is validated through simulation.

eess.SP↗

MetaRadar: Multi-target Detection for Reconfigurable Intelligent Surface Aided Radar Systems

As a widely used localization and sensing technique, radars will play an important role in future wireless networks. However, the wireless channels between the radar and the targets are passively adopted by traditional radars, which limits the performance of target detection. To address this issue, we propose to use the reconfigurable intelligent surface (RIS) to improve the detection accuracy of radar systems due to its capability to customize channel conditions by adjusting its phase shifts, which is referred to as MetaRadar. In such a system, it is challenging to jointly optimize both radar waveforms and RIS phase shifts in order to improve the multi-target detection performance. To tackle this challenge, we design a waveform and phase shift optimization (WPSO) algorithm to effectively solve the multi-target detection problem, and also analyze the performance of the proposed MetaRadar scheme theoretically. Simulation results show that the detection performance of the MetaRadar scheme is significantly better than that of the traditional radar schemes.

eess.SP↗

Holographic Integrated Sensing and Communications: Principles, Technology, and Implementation

Integrated sensing and communication (ISAC) has attracted much attention as a promising approach to alleviate spectrum congestion. However, traditional ISAC systems rely on phased arrays to provide high spatial diversity, where enormous power-consuming components such as phase shifters are used, leading to the high power consumption of the system. In this article, we introduce holographic ISAC, a new paradigm to enable high spatial diversity with low power consumption by using reconfigurable holographic surfaces (RHSs), which is an innovative type of planar antenna with densely deployed metamaterial elements. We first introduce the hardware structure and working principle of the RHS and then propose a novel holographic beamforming scheme for ISAC. Moreover, we build an RHS-enabled hardware prototype for ISAC and evaluate the system performance in the built prototype. Simulation and experimental results verify the feasibility of holographic ISAC and reveal the great potential of the RHS for reducing power consumption. Furthermore, future research directions and key challenges related to holographic ISAC are discussed.

eess.SP↗

Achievable Rate Maximization Pattern Design for Reconfigurable MIMO Antenna Array

Reconfigurable multiple-input multiple-output can provide performance gains over traditional MIMO by reshaping the channels, i.e., introducing more channel realizations. In this paper, we focus on the achievable rate maximization pattern design for reconfigurable MIMO systems. Firstly, we introduce the matrix representation of pattern reconfigurable MIMO (PR-MIMO), based on which a pattern design problem is formulated. To further reveal the effect of the radiation pattern on the wireless channel, we consider pattern design for both the single-pattern case where the optimized radiation pattern is the same for all the antenna elements, and the multi-pattern case where different antenna elements can adopt different radiation patterns. For the single-pattern case, we show that the pattern design is equivalent to a redistribution of gains among all scattering paths, and an eigenvalue optimization based solution is obtained. For the multi-pattern case, we propose a sequential optimization framework with manifold optimization and eigenvalue decomposition to obtain near-optimal solutions. Numerical results validate the superiority of PR-MIMO systems over traditional MIMO in terms of achievable rate, and also show the effectiveness of the proposed solutions.

cs.IT↗

Reconfigurable Holographic Surface: A New Paradigm to Implement Holographic Radio

Ultra-massive multiple-input multiple-output (MIMO) is one of the key enablers in the forthcoming 6G networks to provide high-speed data services by exploiting spatial diversity. In this article, we consider a new paradigm termed holographic radio for ultra-massive MIMO, where numerous tiny and inexpensive antenna elements are integrated to realize high directive gain with low hardware cost. We propose a practical way to enable holographic radio by a novel metasurface-based antenna, i.e., reconfigurable holographic surface (RHS). Specifically, RHSs incorporating densely packed tunable metamaterial elements are capable of holographic beamforming. Based on the working principle and hardware design of RHSs, we conduct full-wave analyses of RHSs and build an RHS-aided point-to-point communication platform supporting real-time data transmission. Both simulated and experimental results show that the RHS has great potential to achieve high directive gain with a limited size, thereby substantiating the feasibility of RHS-enabled holographic radio. Moreover, future research directions for RHS-enabled holographic radio are also discussed.

eess.SP↗

Joint Design for Simultaneously Transmitting And Reflecting (STAR) RIS Assisted NOMA Systems

Different from traditional reflection-only reconfigurable intelligent surfaces (RISs), simultaneously transmitting and reflecting RISs (STAR-RISs) represent a novel technology, which extends the half-space coverage to full-space coverage by simultaneously transmitting and reflecting incident signals. STAR-RISs provide new degrees-of-freedom (DoF) for manipulating signal propagation. Motivated by the above, a novel STAR-RIS assisted non-orthogonal multiple access (NOMA) (STAR-RIS-NOMA) system is proposed in this paper. Our objective is to maximize the achievable sum rate by jointly optimizing the decoding order, power allocation coefficients, active beamforming, and transmission and reflection beamforming. However, the formulated problem is non-convex with intricately coupled variables. To tackle this challenge, a suboptimal two-layer iterative algorithm is proposed. Specifically, in the inner-layer iteration, for a given decoding order, the power allocation coefficients, active beamforming, transmission and reflection beamforming are optimized alternatingly. For the outer-layer iteration, the decoding order of NOMA users in each cluster is updated with the solutions obtained from the inner-layer iteration. Moreover, an efficient decoding order determination scheme is proposed based on the equivalent-combined channel gains. Simulation results are provided to demonstrate that the proposed STAR-RIS-NOMA system, aided by our proposed algorithm, outperforms conventional RIS-NOMA and RIS assisted orthogonal multiple access (RIS-OMA) systems.

cs.IT↗

Intelligent Omni-Surfaces: Reflection-Refraction Circuit Model, Full-Dimensional Beamforming, and System Implementation

The intelligent omni-surface (IOS) is a dynamic metasurface that has recently been proposed to achieve full-dimensional communications by realizing the dual function of anomalous reflection and anomalous refraction. Existing research works provide only simplified models for the reflection and refraction responses of the IOS, which do not explicitly depend on the physical structure of the IOS and the angle of incidence of the electromagnetic (EM) wave. Therefore, the available reflection-refraction models are insufficient to characterize the performance of full-dimensional communications. In this paper, we propose a complete and detailed circuit-based reflection-refraction model for the IOS, which is formulated in terms of the physical structure and equivalent circuits of the IOS elements, as well as we validate it against full-wave EM simulations. Based on the proposed circuit-based model for the IOS, we analyze the asymmetry between the reflection and transmission coefficients. Moreover, the proposed circuit-based model is utilized for optimizing the hybrid beamforming of IOS-assisted networks and hence improving the system performance. To verify the circuit-based model, the theoretical findings, and to evaluate the performance of full-dimensional beamforming, we implement a prototype of IOS and deploy an IOS-assisted wireless communication testbed to experimentally measure the beam patterns and to quantify the achievable rate. The obtained experimental results validate the theoretical findings and the accuracy of the proposed circuit-based reflection-refraction model for IOSs.

cs.IT↗

Reconfigurable Refractive Surfaces: An Energy-Efficient Way to Holographic MIMO

Holographic Multiple Input Multiple Output (HMIMO), which integrates massive antenna elements into a compact space to achieve a spatially continuous aperture, plays an important role in future wireless networks. With numerous antenna elements, it is hard to implement the HMIMO via phased arrays due to unacceptable power consumption. To address this issue, reconfigurable refractive surface (RRS) is an energy efficient enabler of HMIMO since the surface is free of expensive phase shifters. Unlike traditional metasurfaces working as passive relays, the RRS is used as transmit antennas, where the far-field approximation does not hold anymore, urging a new performance analysis framework. In this letter, we first derive the data rate of an RRS-based single-user downlink system, and then compare its power consumption with the phased array. Simulation results verify our analysis and show that the RRS is an energy-efficient way to HMIMO.

cs.IT↗

Meta-material Sensor Based Internet of Things: Design, Optimization, and Implementation

For many applications envisioned for the Internet of Things (IoT), it is expected that the sensors will have very low costs and zero power, which can be satisfied by meta-material sensor based IoT, i.e., meta-IoT. As their constituent meta-materials can reflect wireless signals with environment-sensitive reflection coefficients, meta-IoT sensors can achieve simultaneous sensing and transmission without any active modulation. However, to maximize the sensing accuracy, the structures of meta-IoT sensors need to be optimized considering their joint influence on sensing and transmission, which is challenging due to the high computational complexity in evaluating the influence, especially given a large number of sensors. In this paper, we propose a joint sensing and transmission design method for meta-IoT systems with a large number of meta-IoT sensors, which can efficiently optimize the sensing accuracy of the system. Specifically, a computationally efficient received signal model is established to evaluate the joint influence of meta-material structure on sensing and transmission. Then, a sensing algorithm based on deep unsupervised learning is designed to obtain accurate sensing results in a robust manner. Experiments with a prototype verify that the system has a higher sensitivity and a longer transmission range compared to existing designs, and can sense environmental anomalies correctly within 2 meters.

eess.SP↗

Reconfigurable MIMO towards Electro-magnetic Information Theory: Capacity Maximization Pattern Design

In this paper, we focus on the pattern reconfigurable multiple-input multiple-output (PR-MIMO), a technique that has the potential to bridge the gap between electro-magnetics and communications towards the emerging Electro-magnetic Information Theory (EIT). Specifically, we focus on the pattern design problem aimed at maximizing the channel capacity for reconfigurable MIMO communication systems, where we firstly introduce the matrix representation of PR-MIMO and further formulate a pattern design problem. We decompose the pattern design into two steps, i.e., the correlation modification process to optimize the correlation structure of the channel, followed by the power allocation process to improve the channel quality based on the optimized channel structure. For the correlation modification process, we propose a sequential optimization framework with eigenvalue decomposition to obtain near-optimal solutions. For the power allocation process, we provide a closed-form power allocation scheme to redistribute the transmission power among the modified subchannels. Numerical results show that the proposed pattern design scheme offers significant improvements over legacy MIMO systems, which motivates the application of PR-MIMO in wireless communication systems.

cs.IT↗