arXiv subjects

Linlong Wu

Publications and source records attributed to Linlong Wu.

18 recordsLinked to original sources

arXiv2026

Massive MIMO Channel-aware Decision Fusion Aided by Reconfigurable Intelligent Surfaces

This paper investigates channel-aware decision fusion empowered by massive MIMO systems and reconfigurable intelligent surfaces (RIS). By integrating both, we aim to improve goal-oriented (fusion) performance despite the unique propagation challenges introduced. Specifically, we investigate traditional favorable propagation properties in the context of RIS-aided Massive MIMO decision fusion. The above analysis is then leveraged (i) to design three sub-optimal simple fusion rules suited for the large-array regime and (ii) to devise an optimization criterion for RIS reflection coefficients based on long-term channel statistics. Simulation results confirm the appeal of the presented design.

eess.SP↗

arXiv2025

Scatterer Localization Using Multi-Bounce Paths

Indoor sensing is challenging because of the multi-bounce effect, spherical wavefront, and spatial nonstationarity (SNS) of the near-field effect. This paper addresses radio-based environment sensing considering these issues. Specifically, graph theory (GT) is used to model the multi-bounce propagation of the near field. In this manner, indoor reflectors/scatterers are modeled as vertices in a propagation graph, the multi-bounce paths are modeled by the edges linking the vertices. Besides, the coupled multipath parameters in the near field, i.e., range and angles, are denoted directly by the coordinates of vertices. Then, the space-alternating generalized expectation-maximization (SAGE) algorithm is adapted to the proposed Graph theory-based dictionary-aided Multi-bounce SAGE (GM-SAGE), where the searching parameters including range and angle of departure/arrival (AoD/AoA) are transformed to the coordinates of scatterers in the graph. The proposed algorithm is validated through measurement-calibrated ray tracing (RT) in a complex indoor office. The results demonstrate that the proposed GM-SAGE can deal with multi-bounce channels.

eess.SP↗

arXiv2025

Environment Reconstruction in Multi-Bounce Channels with Array Partial Blockage

Extremely-large antenna arrays (ELAA) are important in applications requiring high angular resolution. However, a prominent issue is the spatial non-stationary (SNS) channels due to partial blockage to the ELAA. In this paper, we address the scatterer localization and subsequent environment reconstruction considering partially blocked SNS channels. Specifically, the SNS effects are parametrically modeled through spatial-varying amplitudes with sparsity. Based on the established signal model, the graph-based dictionary-aided multi-bounce space-alternating generalized expectation-maximization (GM-SAGE) algorithm is applied to estimate the channel parameters and the channel sparsity is empirically detected along with amplitude estimation. To validate the proposed approach, we generate multi-bounce paths through ray tracing (RT) simulations, where the SNS channels caused by partial blockage could be configured flexibly. The simulation results demonstrate the robustness of the proposed approach in dealing with the SNS channels.

eess.SP↗

arXiv2025

Distributed Integrated Sensing, Localization, and Communications over LEO Satellite Constellations

Low Earth orbit (LEO) satellite constellations are rapidly becoming essential enablers of next-generation wireless systems, offering global broadband access, high-precision localization, and reliable sensing beyond terrestrial coverage. However, the inherent limitations of individual LEO satellites, including restricted power, limited antenna aperture, and constrained onboard processing, hinder their ability to meet the growing demands of 6G applications. To address these challenges, this article introduces the concept of distributed integrated sensing, localization, and communication (DISLAC) over LEO constellations, inspired by distributed multiple input multiple output architectures. By enabling inter-satellite cooperation through inter-satellite links, DISLAC jointly exploits communication, localization, and sensing functionalities, achieving synergistic gains in throughput, positioning accuracy, and sensing robustness through shared resources and cooperative design. We present illustrative case studies that quantify these benefits and analyze key system-level considerations, including synchronization, antenna reconfigurability, and inter-satellite link design. The article concludes by outlining open research directions to advance the practical deployment of DISLAC in future non-terrestrial networks.

eess.SP↗

arXiv2024

On the Performance Analysis of Momentum Method: A Frequency Domain Perspective

Momentum-based optimizers are widely adopted for training neural networks. However, the optimal selection of momentum coefficients remains elusive. This uncertainty impedes a clear understanding of the role of momentum in stochastic gradient methods. In this paper, we present a frequency domain analysis framework that interprets the momentum method as a time-variant filter for gradients, where adjustments to momentum coefficients modify the filter characteristics. Our experiments support this perspective and provide a deeper understanding of the mechanism involved. Moreover, our analysis reveals the following significant findings: high-frequency gradient components are undesired in the late stages of training; preserving the original gradient in the early stages, and gradually amplifying low-frequency gradient components during training both enhance performance. Based on these insights, we propose Frequency Stochastic Gradient Descent with Momentum (FSGDM), a heuristic optimizer that dynamically adjusts the momentum filtering characteristic with an empirically effective dynamic magnitude response. Experimental results demonstrate the superiority of FSGDM over conventional momentum optimizers.

cs.LG↗

arXiv2023

Hybrid Precoder Design for Angle-of-Departure Estimation with Limited-Resolution Phase Shifters

Hybrid analog-digital beamforming stands out as a key enabler for future communication systems with a massive number of antennas. In this paper, we investigate the hybrid precoder design problem for angle-of-departure (AoD) estimation, where we take into account the practical constraint on the limited resolution of phase shifters. Our goal is to design a radio-frequency (RF) precoder and a base-band (BB) precoder to estimate AoD of the user with a high accuracy. To this end, we propose a two-step strategy where we first obtain the fully digital precoder that minimizes the angle error bound, and then the resulting digital precoder is decomposed into an RF precoder and a BB precoder, based on the alternating optimization and the alternating direction method of multipliers. Besides, we derive the quantization error upper bound and analyse the convergence behavior of the proposed algorithm. Numerical results demonstrate the superior performance of the proposed method over state-of-the-art baselines.

cs.IT↗

arXiv2023

RIS-Aided Wideband Holographic DFRC

To enable non-line-of-sight (NLoS) sensing and communications, dual-function radar-communications (DFRC) systems have recently proposed employing reconfigurable intelligent surface (RIS) as a reflector in wireless media. However, in the dense environment and higher frequencies, severe propagation and attenuation losses are a hindrance for RIS-aided DFRC systems to utilize wideband processing. To this end, we propose equipping the transceivers with the reconfigurable holographic surface (RHS) that, different from RIS, is a metasurface with an embedded connected feed deployed at the transceiver for greater control of the radiation amplitude. This surface is crucial for designing compact low-cost wideband wireless systems, wherein ultra-massive antenna arrays are required to compensate for the losses incurred by severe attenuation and diffraction. We consider a novel wideband DFRC system equipped with an RHS at the transceiver and a RIS reflector in the channel. We jointly design the digital, holographic, and passive beamformers to maximize the radar signal-to-interference-plus-noise ratio (SINR) while ensuring the communications SINR among all users. The resulting nonconvex optimization problem involves maximin objective, constant modulus, and difference of convex constraints. We develop an alternating maximization method to decouple and iteratively solve these subproblems. Numerical experiments demonstrate that the proposed method achieves better radar performance than non-RIS, random-RHS, and randomly configured RIS-aided DFRC systems.

eess.SP↗

arXiv2023

Relative Entropy-Based Constant-Envelope Beamforming for Target Detection in Large-Scale MIMO Radar With Low-Resoultion ADCs

Hybrid digital/analog architecture and low-resolution analog-to-digital/digital-to-analog converters (ADCs /DACs) are two low-cost implementations for large-scale millimeter wave (mmWave) systems. In this paper, we investigate the problem of constant-envelope transmit beamforming for large-scale multiple-input multiple-output (MIMO) radar system, where the transmit array adopts a hybrid digital/analog architecture with a small number of RF chains and the receive array adopts a fully digital architecture with low-resolution ADCs. We derive the relative entropy between the probability density functions associated with the two test hypotheses under low-resolution ADCs. We formulate our optimization problem by maximizing the relative entropy, subject to the constant envelope and orthogonality constraints. To suboptimally solve the resultant problem, a two-stage framework is developed. In the first stage, we optimize the transmit power at the directions of the target and clutter. In the second stage, an efficient iterative algorithm based on majorization-minimization is presented to obtain the constant-envelope beamformer according to the attained transmit power. Specifically, we apply a quadratic function as the minorizer, leading to a low-complexity solution at each iteration. In addition, to further facilitate low-cost implementation of the constant-envelope beamformer, we consider the problem of one-bit beamforming design and propose an efficient iterative method based on the Nesterov-like gradient method to solve it. Numerical simulations are provided to demonstrate the effectiveness of the proposed schemes.

eess.SP↗

arXiv2023

Sparse Array Design for Dual-Function Radar-Communications System

The problem of sparse array design for dual-function radar-communications is investigated. Our goal is to design a sparse array which can simultaneously shape desired beam responses and serve multiple downlink users with the required signal-to-interference-plus-noise ratio levels. Besides, we also take into account the limitation of the radiated power by each antenna. The problem is formulated as a quadratically constrained quadratic program with a joint-sparsity-promoting regularization, which is NP-hard. The resulting problem is solved by the consensus alternating direction method of multipliers, which enjoys parallel implementation. Numerical simulations exhibit the effectiveness and superiority of the proposed method which leads to a more power-efficient solution.

eess.SY↗

arXiv2022

Improving Pulse-Compression Weather Radar via the Joint Design of Subpulses and Extended Mismatch Filter

Pulse compression can enhance both the performance in range resolution and sensitivity for weather radar. However, it will introduce the issue of high sidelobes if not delicately implemented. Motivated by this fact, we focus on the pulse compression design for weather radar in this paper. Specifically, we jointly design both the subpulse codes and extended mismatch filter based on the alternating direction method of multipliers (ADMM). This joint design will yield a pulse compression with low sidelobes, which equivalently implies a high signal-to-interference-plus-noise ratio (SINR) and a low estimation error on meteorological reflectivity. The experiment results demonstrate the efficacy of the proposed pulse compression strategy since its achieved meteorological reflectivity estimations are highly similar to the ground truth.

eess.SP↗

arXiv2022

Hybrid Beamforming in mmWave Dual-Function Radar-Communication Systems: Models, Technologies, and Challenges

As a promising technology in beyond-5G (B5G) and 6G, dual-function radar-communication (DFRC) aims to ensure both radar sensing and communication on a single integrated platform with unified signaling schemes. To achieve accurate sensing and reliable communication, large-scale arrays are anticipated to be implemented in such systems, which brings out the prominent issues on hardware cost and power consumption. To address these issues, hybrid beamforming (HBF), beyond its successful deployment in communication-only systems, could be a promising approach in the emerging DFRC ones. In this article, we investigate the development of the HBF techniques on the DFRC system in a self-contained manner. Specifically, we first introduce the basics of the HBF based DFRC system, where the system model and different receive modes are discussed with focus. Then we illustrate the corresponding design principles, which span from the performance metrics and optimization formulations to the design approaches and our preliminary results. Finally, potential extension and key research opportunities, such as the combination with the reconfigurable intelligent surface, are discussed concisely.

eess.SP↗

arXiv2022

Multi-IRS-Aided Doppler-Tolerant Wideband DFRC System

Intelligent reflecting surface (IRS) is recognized as an enabler of future dual-function radar-communications (DFRC) by improving spectral efficiency, coverage, parameter estimation, and interference suppression. Prior studies on IRS-aided DFRC focus either on narrowband processing, single-IRS deployment, static targets, non-clutter scenario, or on the under-utilized line-of-sight (LoS) and non-line-of-sight (NLoS) paths. In this paper, we address the aforementioned shortcomings by optimizing a wideband DFRC system comprising multiple IRSs and a dual-function base station that jointly processes the LoS and NLoS wideband multi-carrier signals to improve both the communications SINR and the radar SINR in the presence of a moving target and clutter. We formulate the transmit, {receive} and IRS beamformer design as the maximization of the worst-case radar signal-to-interference-plus-noise ratio (SINR) subject to transmit power and communications SINR. We tackle this nonconvex problem under the alternating optimization framework, where the subproblems are solved by a combination of Dinkelbach algorithm, consensus alternating direction method of multipliers, and Riemannian steepest decent. Our numerical experiments show that the proposed multi-IRS-aided wideband DFRC provides over $4$ dB radar SINR and $31.7$\% improvement in target detection over a single-IRS system.

cs.IT↗

arXiv2021

Double-Phase-Shifter based Hybrid Beamforming for mmWave DFRC in the Presence of Extended Target and Clutters

In millimeter-wave (mmWave) dual-function radar-communication (DFRC) systems, hybrid beamforming (HBF) is recognized as a promising technique utilizing a limited number of radio frequency chains. In this work, in the presence of extended target and clutters, a HBF design based on the subarray connection architecture is proposed for a multiple-input multiple-output (MIMO) DFRC system. In this HBF, the double-phase-shifter (DPS) structure is embedded to further increase the design flexibility. We derive the communication spectral efficiency (SE) and radar signal-to-interference-plus-noise-ratio (SINR) with respect to the transmit HBF and radar receiver, and formulate the HBF design problem as the SE maximization subjecting to the radar SINR and power constraints. To solve the formulated nonconvex problem, the joinT Hybrid bRamforming and Radar rEceiver OptimizatioN (THEREON) is proposed, in which the radar receiver is optimized via the generalized eigenvalue decomposition, and the transmit HBF is updated with low complexity in a parallel manner using the consensus alternating direction method of multipliers (consensus-ADMM). Furthermore, we extend the proposed method to the multi-user multiple-input single-output (MU-MISO) scenario. Numerical simulations demonstrate the efficacy of the proposed algorithm and show that the solution provides a good trade-off between number of phase shifters and performance gain of the DPS HBF.

eess.SP↗

arXiv2021

One-Bit ADCs/DACs based MIMO Radar: Performance Analysis and Joint Design

Extremely low-resolution (e.g. one-bit) analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) can substantially reduce hardware cost and power consumption for MIMO radar especially with large scale antennas. In this paper, we focus on the detection performance analysis and joint design for the MIMO radar with one-bit ADCs and DACs. Specifically, under the assumption of low signal-to-noise ratio (SNR) and interference-to-noise ratio (INR), we derive the expressions of probability of detection ($\mathcal{P}_d$) and probability of false alarm ($\mathcal{P}_f$) for one-bit MIMO radar and also the theoretical performance gap to infinite-bit MIMO radars for the noise-only case. We further find that for a fixed $\mathcal{P}_f$, $\mathcal{P}_d$ depends on the defined quantized signal-to-interference-plus-noise ratio (QSINR), which is a function of the transmit waveform and receive filter. Thus, an optimization problem arises naturally to maximize the QSINR by joint designing the waveform and filter. For the formulated problem, we propose an alternatin\emph{g} wavefo\emph{r}m and filt\emph{e}r d\emph{e}sign for QSINR maximiza\emph{t}ion (GREET). At each iteration of GREET, the receive filter is upadted via the minimum variance distortionless response (MVDR) method, and the one-bit waveform is optimized based on the alternating direction method of multipliers (ADMM) algorithm where the closed-form solutions are obtained for both the primary and slack variables. Numerical simulations are consistent to the theoretical performance analysis and demonstrate the effectiveness of the proposed design algorithm.

eess.SP↗

arXiv2021

Optimal Sensor Placement for Source Localization: A Unified ADMM Approach

Source localization plays a key role in many applications including radar, wireless and underwater communications. Among various localization methods, the most popular ones are Time-Of-Arrival (TOA), Time-Difference-Of-Arrival (TDOA), and Received Signal Strength (RSS) based. Since the Cram\'{e}r-Rao lower bounds (CRLB) of these methods depend on the sensor geometry explicitly, sensor placement becomes a crucial issue in source localization applications. In this paper, we consider finding the optimal sensor placements for the TOA, TDOA and RSS based localization scenarios. We first unify the three localization models by a generalized problem formulation based on the CRLB-related metric. Then a unified optimization framework for optimal sensor placement (UTMOST) is developed through the combination of the alternating direction method of multipliers (ADMM) and majorization-minimization (MM) techniques. Unlike the majority of the state-of-the-art works, the proposed UTMOST neither approximates the design criterion nor considers only uncorrelated noise in the measurements. It can readily adapt to to different design criteria (i.e. A, D and E-optimality) with slight modifications within the framework and yield the optimal sensor placements correspondingly. Extensive numerical experiments are performed to exhibit the efficacy and flexibility of the proposed framework.

eess.SP↗

arXiv2021

Resource Allocation in Heterogeneously-Distributed Joint Radar-Communications under Asynchronous Bayesian Tracking Framework

Optimal allocation of shared resources is key to deliver the promise of jointly operating radar and communications systems. In this paper, unlike prior works which examine synergistic access to resources in colocated joint radar-communications or among identical systems, we investigate this problem for a distributed system comprising heterogeneous radars and multi-tier communications. In particular, we focus on resource allocation in the context of multi-target tracking (MTT) while maintaining stable communication connections. By simultaneously allocating the available power, dwell time and shared bandwidth, we improve the MTT performance under a Bayesian tracking framework and guarantee the communications throughput. Our alternating allocation of heterogeneous resources (ANCHOR) approach solves the resulting nonconvex problem based on the alternating optimization method that monotonically improves the Bayesian Cram\'er-Rao bound. Numerical experiments demonstrate that ANCHOR significant improves the tracking error over two baseline allocations and stability under different target scenarios and radar-communications network distributions.

eess.SP↗

arXiv2021

Heterogeneously-Distributed Joint Radar Communications: Bayesian Resource Allocation

Due to spectrum scarcity, the coexistence of radar and wireless communication has gained substantial research interest recently. Among many scenarios, the heterogeneouslydistributed joint radar-communication system is promising due to its flexibility and compatibility of existing architectures. In this paper, we focus on a heterogeneous radar and communication network (HRCN), which consists of various generic radars for multiple target tracking (MTT) and wireless communications for multiple users. We aim to improve the MTT performance and maintain good throughput levels for communication users by a well-designed resource allocation. The problem is formulated as a Bayesian Cram\'er-Rao bound (CRB) based minimization subjecting to resource budgets and throughput constraints. The formulated nonconvex problem is solved based on an alternating descent-ascent approach. Numerical results demonstrate the efficacy of the proposed allocation scheme for this heterogeneous network.

eess.SP↗

arXiv2021

Sparse Array Beampattern Synthesis via Majorization-Based ADMM

Beampattern synthesis is a key problem in many wireless applications. With the increasing scale of MIMO antenna array, it is highly desired to conduct beampattern synthesis on a sparse array to reduce the power and hardware cost. In this paper, we consider conducting beampattern synthesis and sparse array construction jointly. In the formulated problem, the beampattern synthesis is designed by minimizing the matching error to the beampattern template, and the Shannon entropy function is first introduced to impose the sparsity of the array. Then, for this nonconvex problem, an iterative method is proposed by leveraging on the alternating direction multiplier method (ADMM) and the majorization minimization (MM). Simulation results demonstrate that, compared with the benchmark, our approach achieves a good trade-off between array sparsity and beampattern matching error with less runtime.

eess.SP↗