arXiv subjects

Linnan Jia

Publications and source records attributed to Linnan Jia.

14 recordsLinked to original sources

arXiv2026

Imaging topological polar structures in marginally twisted 2D semiconductors

Moire superlattices formed in van der Waals heterostructures due to twisting, lattice mismatch and strain present an opportunity for creating novel metamaterials with unique properties not present in the individual layers themselves. Ferroelectricity for example, arises due to broken inversion symmetry in twisted and strained bilayers of 2D semiconductors with stacking domains of alternating out-of-plane polarization. However, understanding the individual contributions of twist and strain to the formation of topological polar nanostructures remains to be established and has proven to be experimentally challenging. Inversion symmetry breaking has been predicted to give rise to an in-plane component of polarization along the domain walls, leading to the formation of a network of topologically non-trivial merons (half-skyrmions) that are Bloch-type for twisted and Neel-type for strained systems. Here we utilise angle-resolved, high-resolution vector piezoresponse force microscopy (PFM) to spatially resolve polarization components and topological polar nanostructures in marginally twisted bilayer WSe2, and provide experimental proof for the existence of topologically non-trivial meron/antimeron structures. We observe both Bloch-type and Neel-type merons, allowing us to differentiate between moire superlattices formed due to twist or heterogeneous strain. This first demonstration of non-trivial real-space topology in a twisted van der Waals heterostructure opens pathways for exploring the connection between twist and topology in engineered nano-devices.

cond-mat.mes-hall↗

arXiv2024

Waveguide optical parametric amplifiers in silicon nitride with 2D graphene oxide films

Optical parametric amplification (OPA) represents a powerful solution to achieve broadband amplification in wavelength ranges beyond the scope of conventional gain media, for generating high-power optical pulses, optical microcombs, entangled photon pairs and a wide range of other applications. Here, we demonstrate optical parametric amplifiers based on silicon nitride (Si3N4) waveguides integrated with two-dimensional (2D) layered graphene oxide (GO) films. We achieve precise control over the thickness, length, and position of the GO films using a transfer-free, layer-by-layer coating method combined with accurate window opening in the chip cladding using photolithography. Detailed OPA measurements with a pulsed pump for the fabricated devices with different GO film thicknesses and lengths show a maximum parametric gain of ~24.0 dB, representing a ~12.2 dB improvement relative to the device without GO. We perform a theoretical analysis of the device performance, achieving good agreement with experiment and showing that there is substantial room for further improvement. This work represents the first demonstration of integrating 2D materials on chips to enhance the OPA performance, providing a new way of achieving high performance photonic integrated OPA by incorporating 2D materials.

physics.optics↗

arXiv2022

Enhanced spectral broadening via self-phase modulation with femtosecond optical pulses in silicon nanowires integrated with 2D graphene oxide films

We experimentally demonstrate enhanced spectral broadening of femtosecond optical pulses af-ter propagation through silicon-on-insulator (SOI) nanowire waveguides integrated with two-dimensional (2D) graphene oxide (GO) films. Owing to the strong mode overlap between the SOI nanowires and the GO films with a high Kerr nonlinearity, the self-phase modulation (SPM) process in the hybrid waveguides is significantly enhanced, resulting in greatly improved spectral broadening of the femtosecond optical pulses. A solution-based, transfer-free coating method is used to integrate GO films onto the SOI nanowires with precise control of the film thickness. Detailed SPM measurements using femtosecond optical pulses are carried out, achieving a broadening factor of up to ~4.3 for a device with 0.4-mm-long, 2 layers of GO. By fit-ting the experimental results with theory, we obtain an improvement in the waveguide nonlin-ear parameter by a factor of ~3.5 and the effective nonlinear figure of merit (FOM) by a factor of ~3.8, relative to the uncoated waveguide. Finally, we discuss the influence of GO film length on the spectral broadening and compare the nonlinear optical performance of different integrated waveguides coated with GO films. These results confirm the improved nonlinear optical per-formance for silicon devices integrated with 2D GO films.

physics.optics↗

arXiv2021

Design of microring resonators integrated with 2D graphene oxide films for four-wave mixing

We theoretically investigate and optimize the performance of four-wave mixing (FWM) in microring resonators (MRRs) integrated with two-dimensional (2D) layered graphene oxide (GO) films. Owing to the interaction between the MRRs and the highly nonlinear GO films as well as to the resonant enhancement effect, the FWM efficiency in GO-coated MRRs can be significantly improved. Based on previous experiments, we perform detailed analysis for the influence of the GO film parameters and MRR coupling strength on the FWM conversion efficiency (CE) of the hybrid MRRs. By optimizing the device parameters to balance the trade-off between the Kerr nonlinearity and loss, we achieve a high CE enhancement of ~18.6 dB relative to the uncoated MRR, which is ~8.3 dB higher than previous experimental results. The influence of photo-thermal changes in the GO films as well as variations in the MRR parameters such as the ring radius and waveguide dispersion on the FWM performance is also discussed. These results highlight the significantly improved FWM performance that can be achieved in MRRs incorporating GO films and provide a guide for optimizing their FWM performance.

physics.optics↗

arXiv2021

Design of silicon waveguides for Kerr nonlinear optical performance with graphene oxide films

The Kerr nonlinear optical performance of silicon nanowire waveguides integrated with 2D layered graphene oxide (GO) films is theoretically studied and optimized based on experimentally measured linear and nonlinear optical parameters of the GO films. The strong mode overlap between the silicon nanowires and highly nonlinear GO films yields a significantly enhanced Kerr nonlinearity for the hybrid waveguides. A detailed analysis for the influence of waveguide geometry and GO film thickness on the propagation loss, nonlinear parameter, and nonlinear figure of merit (FOM) is performed. The results show that the effective nonlinear parameter and nonlinear FOM can be increased by up to 52 and 79 times relative to bare silicon nanowires, respectively. Self-phase modulation (SPM)-induced spectral broadening of optical pulses is used as a benchmark to evaluate the nonlinear performance, examining the tradeoff between enhancing Kerr nonlinearity and minimizing loss. By optimizing the device parameters to balance this, a high spectral broadening factor of 27.8 can be achieved, more than 6 times that achieved in previous experiments. Finally, the influence of pulse chirp, material anisotropy, and the interplay between saturable absorption and SPM is also discussed, together with the comparison between the spectral broadening after going through GO-coated and graphene-coated silicon waveguides. These results provide useful guidance for optimizing the Kerr nonlinear optical performance of silicon waveguides integrated with 2D layered GO films.

physics.optics↗

arXiv2021

Graphene oxide films for ultra-flat optics and linear and nonlinear integrated photonic circuits

With superior optical properties, high flexibility in engineering its material properties, and strong capability for large-scale on-chip integration, graphene oxide (GO) is an attractive solution for on-chip integration of two-dimensional (2D) materials to implement functional integrated photonic devices capable of new features. Over the past decade, integrated GO photonics, representing an innovative merging of integrated photonic devices and thin GO films, has experienced significant development, leading to a surge in many applications covering almost every field of optical sciences. This paper reviews the recent advances in this emerging field, providing an overview of the optical properties of GO as well as methods for the on-chip integration of GO. The main achievements made in GO hybrid integrated photonic devices for diverse applications are summarized. The open challenges as well as the potential for future improvement are also discussed.

physics.optics↗

arXiv2021

Theoretical design study of FWM in silicon nitride waveguides with integrated graphene oxide films

We theoretically investigate and optimize four-wave mixing (FWM) in silicon nitride (SiN) waveguides integrated with two-dimensional (2D) layered graphene oxide (GO) films. Based on extensive previous measurements of the material parameters of the GO films, we perform detailed analysis for the influence of device parameters including waveguide geometry, GO film thickness, length, and coating position on the FWM conversion efficiency (CE) and conversion bandwidth (CB). The influence of dispersion and photo-thermal changes in the GO films is also discussed. Owing to the strong mode overlap between the SiN waveguides and the highly nonlinear GO films, FWM in the hybrid waveguides can be significantly enhanced. We obtain good agreement with previous experimental results and show that by optimizing the device parameters to balance the trade-off between Kerr nonlinearity and loss, the FWM CE can be improved by as much as ~20.7 dB and the FWM CB can be increased by ~4.4 folds, relative to the uncoated waveguides. These results highlight the significantly enhanced FWM performance that can be achieved in SiN waveguides by integrating 2D layered GO films.

physics.optics↗

arXiv2020

High performance integrated polarizers achieved by incorporating 2D layered graphene oxide films

Polarizers and polarization selective resonant cavities (e.g., ring resonators, gratings), are key components for applications to photography, coherent optical detection, polarization-division-multiplexing, optical sensing and liquid crystal displays. We demonstrate waveguide polarizers and polarization discriminating micro-ring resonators (MRRs) by integrating them with 2D graphene oxide (GO) layered thin films. We achieve precise control of the thickness, placement, and size of the films integrated onto photonic devices with a solution based, layer-by-layer transfer-free coating method combined with photolithography and lift-off. This overcomes limitations of layer transfer methods for 2D materials and is a significant advance to manufacturing integrated photonic devices incorporated with 2D materials. We measure the waveguide polarizer for different film thicknesses and lengths versus wavelength, polarization, and power, measuring a high polarization dependent loss (PDL) of ~ 53.8 dB. For GO-coated MRRs, we achieve an extinction ratio difference for TE/TM polarizations of 8.3-dB. We also present measurements of the linear optical properties of 2D layered GO films that yield the material loss anisotropy of the GO films and relative contribution of film loss anisotropy versus polarization-dependent mode overlap. Our results offer interesting physical insights into the transition of the layered GO films from 2D behaviour to quasi bulk like behavior and confirm the high performance of GO based integrated polarization selective devices.

physics.optics↗

arXiv2020

BiOBr 2D materials for integrated nonlinear photonics devices

As a new group of advanced 2D layered materials, bismuth oxyhalides, i.e., BiOX (X = Cl, Br, I), have recently become of great interest. In this work, we characterize the third-order optical nonlinearities of BiOBr, an important member of the BiOX family. The nonlinear absorption and Kerr nonlinearity of BiOBr nanoflakes at both 800 nm and 1550 nm are characterized via the Z-Scan technique. Experimental results show that BiOBr nanoflakes exhibit a large nonlinear absorption coefficient = \b{eta} = 10-7 m/W as well as a large Kerr coefficient n2 = 10-14 m2/W. We also note that the n2 of BiOBr reverses sign from negative to positive as the wavelength is changed from 800 nm to 1550 nm. We further characterize the thickness-dependent nonlinear optical properties of BiOBr nanoflakes, finding that the magnitudes of \b{eta} and n2 increase with decreasing thickness of the BiOBr nanoflakes. Finally, we integrate BiOBr nanoflakes into silicon integrated waveguides and measure their insertion loss, with the extracted waveguide propagation loss showing good agreement with mode simulations based on ellipsometry measurements. These results confirm the strong potential of BiOBr as a promising nonlinear optical material for high-performance hybrid integrated photonic devices.

physics.optics↗

arXiv2020

Large and negative Kerr nonlinearity in PdSe2 dichalcogenide 2D films

We report a large third order nonlinear optical response of palladium diselenide (PdSe2) films, a two dimensional (2D) noble metal dichalcogenide material. Both open aperture (OA) and closed aperture (CA) Z scan measurements are performed with a femtosecond pulsed laser at 800 nm to investigate the nonlinear absorption and nonlinear refraction, respectively. In the OA experiment, we observe optical limiting behaviour originating from large two photo absorption (TPA) in the PdSe2 film of beta = 3.26 x 10-8 m/W. In the CA experiment, we measure a peak-valley response corresponding to a large and negative Kerr nonlinearity of n2 = -1.33 x 10-15 m2/W, two orders of magnitude larger than bulk silicon. We also characterize the variation of n2 as a function of laser intensity, observing that n2 decreases in magnitude with incident laser intensity, becoming saturated at n2 = -9.96 x 10-16 m2/W at high intensities. These results verify the large third order nonlinear optical response of 2D PdSe2 as well as its strong potential for high performance nonlinear photonic devices.

physics.optics↗

arXiv2020

Enhanced nonlinear optical figure-of-merit at 1550nm for silicon nanowires integrated with graphene oxide layered films

Layered 2D GO films are integrated with silicon on insulator (SOI) nanowire waveguides to experimentally demonstrate an enhanced Kerr nonlinearity, observed through selfphase modulation (SPM). The GO films are integrated with SOI nanowires using a large area, transfer free, layer by layer coating method that yields precise control of the film thickness. The film placement and coating length are controlled by opening windows in the silica cladding of the SOI nanowires. Owing to the strong mode overlap between the SOI nanowires and the highly nonlinear GO films, the Kerr nonlinearity of the hybrid waveguides is significantly enhanced. Detailed SPM measurements using picosecond optical pulses show significant spectral broadening enhancement for SOI nanowires coated with 2.2 mm long films of 1 to 3 layers of GO, and 0.4 mm long films with 5 to 20 layers of GO. By fitting the experimental results with theory, the dependence of the n2 for GO on layer number and pulse energy is obtained, showing interesting physical insights and trends of the layered GO films from 2D monolayers to quasi bulk like behavior. Finally, we show that by coating SOI nanowires with GO films the effective nonlinear parameter of SOI nanowires is increased 16 times, with the effective nonlinear figure of merit (FOM) increasing by about 20 times to greater than 5. These results reveal the strong potential of using layered GO films to improve the Kerr nonlinear optical performance of silicon photonic devices.

physics.optics↗

arXiv2020

Enhanced four-wave-mixing with 2D layered graphene oxide films integrated with CMOS compatible micro-ring resonators

Layered 2D graphene oxide (GO) films are integrated with microring resonators (MRRs) to experimentally demonstrate enhanced nonlinear optics in the form of four wave mixing (FWM). Both uniformly coated and patterned GO films are integrated on CMOS compatible doped silica MRRs using a large area, transfer free, layer by layer GO coating method together with photolithography and lift off processes, yielding precise control of the film thickness, placement, and coating length. The high Kerr nonlinearity and low loss of the GO films combined with the strong light matter interaction within the MRRs results in a significant improvement in the FWM efficiency in the hybrid MRRs. Detailed FWM measurements are performed at different pump powers and resonant wavelengths for the uniformly coated MRRs with 1 to 5 layers of GO as well as the patterned devices with 10 to 50 layers of GO. The experimental results show good agreement with theory, achieving up to 7.6 dB enhancement in the FWM conversion efficiency (CE) for an MRR uniformly coated with 1 layer of GO and 10.3 dB for a patterned device with 50 layers of GO. By fitting the measured CE as a function of pump power for devices with different numbers of GO layers, we also extract the dependence of the third-order nonlinearity on layer number and pump power, revealing interesting physical insights about the evolution of the layered GO films from 2D monolayers to quasi bulk like behavior. These results confirm the high nonlinear optical performance of integrated photonic resonators incorporated with 2D layered GO films.

physics.optics↗

arXiv2019

High third-order Kerr optical nonlinearity in BiOBr 2D films measured by the Z-scan method

We investigate the nonlinear optical properties of BiOBr nanoflakes, a novel two-dimensional (2D) layered material from the Bismuth oxyhalide family. We measure the nonlinear absorption and Kerr nonlinearity of BiOBr nanoflakes at both 800 nm and 1550 nm via the Z scan technique. We observe a large nonlinear absorption coefficient beta = 10^-7 m/W as well as a large Kerr coefficient n2 = 10^-14 m^2/W. We also observe strong dispersion in n2, with it reversing sign from negative to positive as the wavelength varies from 800 nm to 1550 nm. In addition, we characterize the thickness-dependence of the nonlinear optical properties of BiOBr nanoflakes, observing that both the magnitudes of beta and n2 increase for very thin flakes. Finally, we integrate BiOBr nanoflakes onto silicon integrated waveguides and characterize the linear optical properties of the resulting hybrid integrated devices, with the measurements agreeing with calculated parameters using independent ellipsometry measurements. These results verify the strong potential of BiOBr as an advanced nonlinear optical material for high-performance hybrid integrated photonic devices.

physics.optics↗

arXiv2018

Tunable RF and microwave photonic sideband generator based on cascaded 49GHz and 200GHz integrated ring resonators

We demonstrate a continuously RF tunable orthogonally polarized optical single sideband (OP-OSSB) generator based on dual cascaded micro-ring resonators. By splitting the input double sideband signal into an orthogonally polarized carrier and lower sideband via TE- and TM-polarized MRRs, an OP-OSSB signal is generated. A large tuning range of the optical carrier to sideband ratio of up to 57.3 dB is achieved by adjusting the polarization angle of the input light. The operation RF frequency of the OP-OSSB generator can be continuously tuned with a 21.4 GHz range via independent thermal control of the two MRRs. Our device represents a competitive approach towards OP-OSSB generation with wideband tunable RF operation, and is promising for photonic RF signal transmission and processing in radar and communication systems.

physics.app-ph↗