arXiv subjects

Linus Andersson

Publications and source records attributed to Linus Andersson.

5 recordsLinked to original sources

arXiv2026

In situ calibration of microwave attenuation and gain using a cryogenic on-chip attenuator

Accurate in situ calibration of microwave attenuation and amplification-chain noise is essential for superconducting quantum circuits. We demonstrate a compact, self-calibrating cryogenic noise source based on an on-chip chromium attenuator that can be resistively heated with nanowatt-level power and directly integrated into a coaxial microwave line at the mixing-chamber stage. By comparing Johnson-Nyquist noise generated by Joule and microwave heating, measured through the amplification chain, the attenuation of the input line, and hence the gain of the chain, is determined without requiring knowledge of the attenuator temperature. The device exhibits millisecond-scale response times and negligible heating of the cryostat base plate. Using this approach, we determine the gain and added noise of a cryogenic amplification chain over the 4-8 GHz band. Our results provide a simple and accurate method to characterize near-quantum-limited parametric amplifiers used in superconducting-qubit readout.

quant-ph↗

arXiv2026

Real-time detection of correlated quasiparticle tunneling events in a multi-qubit superconducting device

Quasiparticle tunneling events are a source of decoherence and correlated errors in superconducting circuits. Understanding and ultimately mitigating these errors calls for real-time detection of quasiparticle tunneling events on individual devices. In this work, we simultaneously detect quasiparticle tunneling events in two co-housed, charge-sensitive transmons coupled to a common waveguide. We measure background quasiparticle tunneling rates at the single-hertz level, with temporal resolution of tens of microseconds. Using time-tagged coincidence analysis, we show that individual events are uncorrelated across devices, whereas burst episodes occur about once per minute and are largely correlated. These bursts have a characteristic lifetime of 7 ms and induce a thousand-fold increase in the quasiparticle tunneling rate across both devices. In addition, we identify a rarer subset of bursts which are accompanied by a shift in the offset charge, at approximately one event per hour. Our results establish a practical and extensible method to identify quasiparticle bursts in superconducting circuits, as well as their correlations and spatial structure, advancing routes to suppress correlated errors in superconducting quantum processors.

quant-ph↗

arXiv2025

Automated, physics-guided, multi-parameter design optimization for superconducting quantum devices

The design of nonlinear superconducting quantum circuits often relies on time-consuming iterative electromagnetic simulations requiring manual intervention. These interventions entail, for example, adjusting design variables such as resonator lengths or Josephson junction energies to meet target parameters such as mode frequencies, decay rates, and coupling strengths. Here, we present a method to efficiently automate the optimization of superconducting circuits, which significantly reduces the need for manual intervention. The method's efficiency arises from user-defined, physics-informed, nonlinear models that guide parameter updates toward the desired targets. Additionally, we provide a full implementation of our optimization method as an open-source Python package, QDesignOptimizer. The package automates the design workflow by combining high-accuracy electromagnetic simulations in Ansys HFSS and Energy Participation Ratio (pyEPR) analysis integrated with the design tool Qiskit-Metal. Our implementation supports modular and flexible subsystem-level analysis and is easily extensible to optimize for additional parameters. The method is not specific to superconducting circuits; as such, it can be applied to a range of nonlinear optimization problems across science and technology.

quant-ph↗

arXiv2025

Co-designed reflective and leaky-waveguide low-pass filter for superconducting circuits

A stepped-impedance low-pass filter with integrated hollow waveguide absorbers is presented. The filter combines low insertion loss in the passband with strong attenuation at high frequencies, making it well suited for superconducting quantum computing applications, where qubits are sensitive to both near-band and far out-of-band radiation. The structure is implemented in a rectangular coaxial geometry, with inductive sections coupled to circular hollow waveguides oriented orthogonally to the transmission axis. Above their cutoff frequency, these waveguides efficiently couple to radiation inside the stepped-impedance filter, absorbing energy that would otherwise cause Cooper pair breaking in conventional superconductors. Optimal dimensions were obtained using a differential evolution algorithm applied to interpolated electromagnetic simulation data. A prototype was fabricated and characterized using a calibrated vector network analyzer up to 67 GHz. Measurements confirm a 3 dB cutoff frequency at 13.5 GHz, insertion loss below 0.45 dB for frequencies under 8 GHz, and more than 52.7 dB rejection above 17.3 GHz. The design offers a compact, low-loss solution for near-band filtering and suppression of quasiparticle-generating radiation in cryogenic quantum systems.

quant-ph↗

arXiv2024

Direct detection of quasiparticle tunneling with a charge-sensitive superconducting sensor coupled to a waveguide

Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and $7~\rm{s}^{-1}$, depending on the average occupation of the detector qubit, and achieve a temporal resolution below $10~\mu\rm{s}$ without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing.

quant-ph↗