arXiv subjects

Lipeng Zhu

Publications and source records attributed to Lipeng Zhu.

At least 19 recordsLinked to original sources

arXiv2026

A New Paradigm of 6G Networks: Proactive Channel Cognition and Reconfiguration

The sixth-generation (6G) wireless networks are expected to enable the deep integration of communication, sensing, computing, control, and intelligence in highly dynamic environments. This evolution drives a fundamental transition from conventional passive channel adaptation to proactive channel cognition and reconfiguration, wherein wireless channels are no longer regarded as uncontrollable propagation media but as network resources that can be learned, predicted, and actively reconfigured. This paper presents a comprehensive overview of this emerging paradigm. We first review channel cognition through the channel knowledge map (CKM) as a systematic framework for learning and exploiting channel characteristics across space, time, and frequency domain. The definitions, construction methods, and applications in wireless networks of CKMs are comprehensively reviewed. Building upon channel cognition, we then review channel reconfiguration technologies from two complementary perspectives: transceiver-side reconfiguration enabled by movable antennas (MAs) and environment-side reconfiguration enabled by intelligent reflecting surfaces (IRSs). For both MA- and IRS-enabled wireless systems, we review their architectures, performance advantages, and key design challenges. Finally, we discuss several promising research directions to inspire further innovations in this burgeoning field.

eess.SP↗

arXiv2026

Movable Antennas for Robust Wireless Sensing via Joint Cram\'er-Rao Bound and Sidelobe Minimization

This paper presents a novel design approach for movable antenna (MA)-enabled wireless sensing systems by jointly minimizing the Cram\'er-Rao bound (CRB) and the maximum sidelobe level (MSL) of the ambiguity function via antenna position optimization. In particular, the mean squared error (MSE) of angle-of-arrival (AoA) estimation is decomposed into a local estimation error within the mainlobe of the ambiguity function (i.e., CRB) and an additional ambiguity error caused by its sidelobes. Since the MSE is dominated by the CRB in the high-signal-to-noise ratio (SNR) regime but by the sidelobes of the ambiguity function in the low-SNR regime, our analysis reveals a fundamental trade-off between CRB minimization and MSL minimization in the moderate-SNR regime. Specifically, minimizing the CRB prefers a narrower mainlobe, where antennas are concentrated near the two edges of the one-dimensional (1-D) movement region; whereas minimizing the MSL favors a wider mainlobe, where antennas are distributed more densely near the center of the movement region. Inspired by this and to ensure robust sensing performance across different SNR regimes, we formulate an optimization problem to minimize the CRB subject to a prescribed MSL constraint via antenna position optimization. An efficient successive convex approximation (SCA) algorithm is developed to optimize the antenna position vector (APV), and a 1-D linear search method is proposed to determine the optimal MSL threshold that minimizes the actual MSE for any given SNR. Numerical results demonstrate that the proposed scheme effectively balances the trade-off between MSL and CRB minimization, thus achieving a significantly lower AoA estimation MSE across the entire SNR range compared to conventional uniform and non-uniform fixed-position antenna (FPA) arrays.

cs.IT↗

arXiv2026

Intelligent Domain Adaptation for Power System Transient Stability Assessment Under Varying Operating Scenarios

While deep learning-based transient stability assessment (TSA) approaches have exhibited great potential in power system stability monitoring, they are prone to undergo performance degradation in practical contexts with frequent variations of operating conditions. To address this issue, this work develops an adaptive TSA framework via domain adaptation-enabled deep transfer learning. First, for the sake of capturing the primary transient stability characteristics, a robust metric, i.e., heterogeneous hybrid distribution metric (HHDM), is designed through mathematical means to effectively handle multi-scale Gaussian and long-tail distributions of transient responsive data and to precisely quantify the intrinsic distributional discrepancies between the source and target domains corresponding to different operating scenarios. With the help of the HHDM, a Bayesian theory-based dual-distribution domain adaptation method is constructed, aligning not only marginal probability distributions between domains but also the distributions of sub-domain categories. Such alignments enable fine-grained transient stability feature transfer, helping significantly improve the adaptability of a well-trained TSA model to target domains. Furthermore, a multilayer sparse regularization algorithm is introduced to mitigate feature volatility caused by variations in operating scenarios, thereby enhancing the model's generalization in the presence of unforeseen scenarios. Numerical tests on three test systems illustrate that, compared with conventional methods, the proposed framework improves online TSA accuracy by 0.5% to 5% in a cost-effective manner, with the learning cost for TSA model update largely reduced.

eess.SY↗

arXiv2026

Impedance Modeling and Stability Analysis of Droop-Controlled Inverter Under Unbalanced Power Grid Operating Conditions

With the growing integration of renewable energy sources into power grids, the risks of oscillation caused by interactions between grid-tied inverters and the grids are becoming increasingly prominent. Although existing studies have made significant progress in inverter modeling and oscillatory stability analysis, most of them do not sufficiently consider complex mirror frequency coupling effects (MFCE) under unbalanced operating conditions, leading to unreliable models and erroneous stability analysis results. To address this inadequacy, this work develops a novel sequence impedance modeling scheme that can be widely applied to unbalanced operating conditions. In particular, taking a representative type of grid-forming inverter for instance, i.e., droop-controlled inverter (DCI), a single-input single-output sequence impedance modeling method based on harmonic linearization (HL) is proposed to comprehensively model both a given DCI and the connected grid. By accounting for multi-frequency interactions within the DCI, this method captures MFCE and unbalanced factors, leading to a more accurate impedance model. Further, the dominant factors influencing system stability are identified with a combination of normalized sensitivity analysis and proportional weighting. Finally, the detailed impacts of these dominant factors on system stability margin under three typical unbalanced operating conditions are analyzed through the Bode criterion. The effectiveness and reliability of the whole scheme proposed in this work are validated on the constructed grid-connected droop-controlled experimental platform.

eess.SY↗

arXiv2026

Tri-Domain Multiuser MIMO Precoding Optimization and Channel Estimation with Spatial-EM Reconfigurable Antenna

In this paper, we propose a tri-domain reconfigurable multiuser multiple-input multiple-output (MIMO) communication system that integrates the electromagnetic (EM) reconfigurable antenna (EMRA) with the spatially movable antenna (SMA), termed the spatial-EM reconfigurable antenna (SEMRA). The proposed system offers EM, spatial, and digital domain degrees of freedom (DoFs) for joint channel reconfiguration, yet introduces new challenges in channel estimation (CE) and precoding optimization. Specifically, for multiuser orthogonal frequency division multiplexing (OFDM) downlink, the precoding design is formulated as a tri-domain optimization problem over antenna positions, EM-domain radiation-pattern weights, and digital precoders. We first develop a zero-forcing (ZF)-based baseline algorithm to decouple the design of spatial reconfiguration, and then propose a weighted minimum mean square error (WMMSE)-based tri-domain joint optimization algorithm for further improving the spectral efficiency (SE). Furthermore, we propose a low-overhead movement-aided channel estimation scheme in which coordinated antenna repositioning across pilot slots synthesizes a denser virtual array, enabling more accurate angle-of-departure (AoD) estimation and EM-domain channel state information (eCSI) reconstruction under the same per-user pilot overhead as the EMRA baseline. The resulting parametric representation enables eCSI assembly at desired antenna positions without additional pilots. Simulation results show that the proposed CE scheme improves eCSI estimation accuracy and the proposed SEMRA achieves higher SE than the EMRA baseline under the same pilot overhead.

eess.SP↗

arXiv2026

Slow Movable Antenna System Design Based on Cell-Specific Long-Term Angular Power Spectrum

Movable antenna (MA) has recently emerged as a promising paradigm for enhancing wireless communication performance by exploiting spatial degrees of freedom through flexible antenna repositioning. However, most existing designs rely on short-term user-specific instantaneous/statistical channel state information (CSI), which incurs excessive channel estimation overhead and complexity due to frequent antenna movement. To address this issue, this paper proposes a new design framework for antenna position optimization over a much longer timescale based on the cell-level statistical channel information acquired at the base station (BS). To this end, a cell-specific statistical channel model is developed for MA-aided multiuser communication systems, based on which the antenna position optimization framework for maximizing the ergodic system utility is formulated. Then, the covariance-eigenvalues-balancing antenna positions (CEBAP) design is derived to asymptotically approximate optimal solutions by statistically reducing users' channel correlation. Notably, the CEBAP solution solely depends on the BS-side angular power spectrum (APS) of wireless channels for mobile users across the cell, which significantly alleviates the overhead of channel acquisition and antenna movement, and yet remains effective for improving various system utilities over long timescales, such as weighted sum rate and minimum signal-to-interference-plus-noise ratio. Moreover, a low-complexity log-barrier penalized optimization (LOBPO) method is proposed to numerically solve the CEBAP. Simulation results based on realistic urban layouts and ray-tracing channels demonstrate consistent performance gains of the proposed CEBAP over fixed-position antenna systems across different utility functions, which closely approaches the upper bound achieved by instantaneous CSI-based MA optimization for moderately large antenna regions.

eess.SP↗

arXiv2026

Adaptive Spatial-Temporal Graph Learning-Enabled Short-Term Voltage Stability Assessment against Time-Varying Topological Conditions

The emerging deep learning (DL) technology has recently exhibited great potential in data-driven short-term voltage stability (SVS) assessment of complex power grids. However, without sufficient attention to the time-varying topological structures of today's power grids, the majority of existing DL-based SVS assessment schemes could experience severe performance degradation in practice. To address this drawback, this paper proposes an adaptive spatial-temporal graph learning-enabled SVS assessment approach that can adapt well to various topological changes. First, considering the time-varying topological conditions of a given power grid, an adaptive graph representation matrix is automatically learned to effectively capture the complicated spatial correlations between individual buses within the grid. Then, to help better capture regional SVS features for subsequent learning processes, the adaptive graph representation matrix is properly adjusted by introducing a spatial attention mechanism. Further, with post-fault system trajectory data linked together via attention-based graph representation, a residual spatiotemporal graph convolutional network is carefully built with Optuna-based optimization to deeply mine system-wide spatiotemporal features and thus achieve structure-adaptive SVS assessment. Numerical test results on two representative sub-systems of a realistic provincial power grid in South China demonstrate the efficacy of the proposed approach under various changing topological conditions.

eess.SY↗

arXiv2026

Trajectory Design for Fairness Enhancement in Movable Antennas-Aided Communications

Through adaptive antenna repositioning, the movable antenna (MA) technology enables on-demand reconfiguration of wireless channels, thereby creating an additional spatial degree of freedom in improving communication performance. This paper investigates a multiuser uplink communication system aided by MAs, where a base station (BS) equipped with multiple MAs serves multiple single-antenna users. Specifically, given that an optimized array geometry cannot guarantee rate fairness, we focus on designing antenna trajectory at the BS to maximize the minimum achievable rate among all users over a finite time period. The resulting optimization problem is fundamentally challenging to solve due to the continuous-time nature. To address it, we first examine an ideal case with infinitely fast MA movement and demonstrate that the relaxed problem can be optimally solved via the Lagrangian dual method. The obtained trajectory solution reveals that the BS should employ a finite set of MA deployment patterns, each allocated an optimal time duration. Building on this, we then study the general case with limited MA movement speed and propose a heuristic trajectory design inspired by the optimal patterns identified in the ideal scenario. Several insights are also gained by examining the simplified special case. Finally, numerical results are provided to validate the effectiveness of the proposed designs compared to competitive benchmarks.

cs.IT↗

arXiv2026

Fundamental Tradeoff in Movable Antenna Systems: How Long to Move Before Transmission?

The movable antenna (MA) technology enables flexible reconfiguration of wireless channels through adaptive antenna deployment, offering significant potential for enhancing communication performance. However, antenna movement requires a certain duration within which communication may be compromised due to factors such as channel fluctuation and Doppler effect. This leads to a fundamental tradeoff: A longer movement duration allows antennas to reach more favorable positions for better channel conditions, but it inevitably reduces the time available for data transmission. To characterize the aforementioned tradeoff, we focus on the MAs-enabled multiuser downlink scenario, and jointly optimize the movement duration and antenna deployment at the base station to maximize the effective throughput. The formulated problem is highly non-convex. The general solutions require an one-dimensional search over movement durations, each with optimized antenna deployment. To reduce complexity, we propose a fitting method that samples only a few rate-duration pairs, yielding a closed-form expression that captures the rate trend and enables a favorable solution immediately. We further derive a closed-form condition on the maximum antenna movement speed: When the speed is below a certain threshold, the optimal strategy is to keep antennas stationary throughout the transmission period. The fundamental tradeoff and the effectiveness of the proposed solutions are examined in a special case with two MAs and two users. Finally, numerical simulations validate the efficacy of the proposed schemes.

cs.IT↗

arXiv2026

Flexible Cylindrical Array-Aided Secure Wireless Communications

Flexible-geometry arrays based on movable antennas have shown considerable potential for improving wireless communication performance. In this letter, we investigate a multiuser multiple-input single-output (MU-MISO) downlink secure communication system aided by a flexible cylindrical array (FCLA) and artificial noise (AN), where each antenna element rotates along circular tracks while the circular slices move along a vertical axis. To guarantee transmission security, we aim to maximize the achievable sum rate at multiple legitimate information receivers by jointly optimizing transmit beamforming, AN covariance matrix, and antenna placement under secrecy constraints for an eavesdropper. While the resulting problem is intractable to solve, we develop a block coordinate descent (BCD)-based framework that combines the Lagrangian dual transform, tight semidefinite relaxation (SDR), and Nesterov-accelerated projected gradient descent (PGD). Numerical results show that the proposed algorithm converges rapidly and achieves significant sum-rate gains over benchmark schemes by exploiting the geometry flexibility of the array.

eess.SP↗

arXiv2026

Rotatable Antenna Enhanced Multicast Communication System

Rotatable antenna (RA) provides additional spatial degrees of freedom (DoFs) for communication systems by enabling per-antenna dynamic boresight adjustment, which is attractive for fairness-oriented multicast transmission. This letter investigates an RA-enhanced downlink multi-group multicast system. Specifically, we aim to maximize the minimum signal-to-interference-plus-noise ratio (SINR) among all users by jointly optimizing the multicast beamforming vectors and the RA boresight directions under transmit power and rotation constraints. To solve this non-convex problem, we first reformulate the max-min SINR objective via quadratic transform. Then, we develop an alternating optimization (AO) algorithm that iteratively updates the multicast beamforming and RA boresight directions. The beamforming vectors are obtained from a convex subproblem, while the boresight directions are refined using a successive convex approximation (SCA) procedure. Simulation results verify that the proposed RA-based scheme substantially enhances the fairness performance compared with fixed antenna-based and random-orientation benchmarks.

cs.IT↗

arXiv2026

Rotatable Antenna-Empowered Wireless Networks: A Tutorial

Non-fixed flexible antenna architectures, such as fluid antenna system (FAS), movable antenna (MA), and pinching antenna, have garnered significant interest in recent years. Among them, rotatable antenna (RA) has emerged as a promising technology for enhancing wireless communication and sensing performance through flexible antenna orientation/boresight rotation. By enabling mechanical or electronic boresight adjustment without altering physical antenna positions, RA introduces additional spatial degrees of freedom (DoFs) beyond conventional beamforming. In this paper, we provide a comprehensive tutorial on the fundamentals, architectures, and applications of RA-empowered wireless networks. Specifically, we begin by reviewing the historical evolution of RA-related technologies and clarifying the distinctive role of RA among flexible antenna architectures. Then, we establish a unified mathematical framework for RA-enabled systems, including general antenna/array rotation models, as well as channel models that cover near- and far-field propagation characteristics, wideband frequency selectivity, and polarization effects. Building upon this foundation, we investigate antenna/array rotation optimization in representative communication and sensing scenarios. Furthermore, we examine RA channel estimation/acquisition strategies encompassing orientation scheduling mechanisms and signal processing methods that exploit multi-view channel observations. Beyond theoretical modeling and algorithmic design, we discuss practical RA configurations and deployment strategies. We also present recent RA prototypes and experimental results that validate the practical performance gains enabled by antenna rotation. Finally, we highlight promising extensions of RA to emerging wireless paradigms and outline open challenges to inspire future research.

cs.IT↗

arXiv2026

Lightweight Multimodal LLM-Enabled Cost-Effective Defect Grading of Power Transmission Equipment

Defect grading of power transmission equipment (DGPTE) is crucial to the stability of electric energy transmission. Although existing machine learning methods exhibit strong capabilities in defect detection, they are plagued by difficulties in integrating expert experience and facing class imbalance in more refined defect grading field. To address this issue, this paper introduces a novel defect grading framework based on multimodal large language model (MLLM). Specifically, this approach maximizes the commercial MLLMs' potential of DGPTE through in-context learning and obtains the state-of-te-art (SOTA) model. By sending a secondary request to this model, a small number of chain of thought-based question-answer pairs (Q\&As) are generated, which effectively reduces the cost of manual annotation. In this way, these high-quality interpretable Q\&As are used to train Qwen3-VL-8B via Low-Rank Adaption-based supervised fine-tuning (SFT). Experimental results on three DGPTE tasks demonstrate that fine-tuning only the language model layer yields the SOTA performance. Furthermore, multi-task joint fine-tuning verifies the feasibility of handling multiple grading tasks within only a single lightweight MLLM.

cs.CL↗

arXiv2026

Directivity Enhancement of Movable Antenna Arrays with Mutual Coupling

In conventional antenna arrays, mutual coupling between antenna elements is often regarded as detrimental. However, under specific conditions, it can be harnessed to enhance the far-field directivity (i.e., beamforming gain). Theoretically, the directivity of an N-antenna superdirective array over the endfire direction can reach N^{2}, significantly exceeding the directivity of a traditional uncoupled array which is N over all directions. This paper investigates the potential of mutual coupling effects in movable antenna (MA) arrays for directivity enhancement. A low-complexity algorithm called Greedy Search and Gradient Descent (GS-GD) is proposed to optimize the antenna positions for maximizing the array directivity over any given direction, where the antenna positions are first selected sequentially from discrete grid points and then continuously refined through gradient descent (GD) optimization. Numerical results demonstrate that the optimized MA array design by exploiting the antenna coupling achieves significant directivity gains compared to the conventional uniform linear array (ULA) without antenna coupling over all directions. Additionally, the proposed GS-GD algorithm is shown to approach the global optimum closely in most directions.

cs.IT↗

arXiv2026

3-D Trajectory Optimization for Robust Direction Sensing in Movable Antenna Systems

This paper presents a novel wireless sensing system where a movable antenna (MA) continuously moves and receives sensing signals within a three-dimensional (3-D) region to enhance sensing performance compared with conventional fixed-position antenna (FPA)-based sensing. We show that the performance of direction vector estimation for a target is fundamentally related to the 3-D MA trajectory in terms of the mean square angular error lower-bound (MSAEB), which is adopted as a coordinate-invariant performance metric. In particular, the closed-form expression of the MSAEB is derived as a function of the trajectory covariance matrix. Theoretical analysis shows that two-dimensional (2-D) antenna movement suffers from performance divergence for target direction close to the endfire direction of the 2-D MA plane, whereas 3-D movement can achieve isotropic sensing performance over the entire angular region. To achieve robust sensing performance, we formulate a min-max optimization problem to minimize the maximum (worst-case) MSAEB over a given continuous angular region wherein the target is located. An efficient successive convex approximation (SCA) algorithm is developed to optimize the 3-D MA trajectory and obtain a locally optimal solution. Numerical results demonstrate that the proposed 3-D MA sensing scheme is able to significantly reduce the worst-case mean square angular error (MSAE) compared with conventional arrays with FPAs and MA systems with 2-D movement only, thus achieving more accurate and robust direction estimation over the entire angular region.

cs.IT↗

arXiv2026

A Survey on Reconfigurable and Movable Antennas for Wireless Communications and Sensing

Reconfigurable antennas (RAs) and movable antennas (MAs) have been recognized as promising technologies to enhance the performance of wireless communication and sensing systems by introducing additional degrees of freedom (DoFs) in tuning antenna radiation and/or placement. This paradigm shift from conventional non-reconfigurable/movable antennas offers tremendous new opportunities for realizing multi-functional, more adaptive, and efficient next-generation wireless networks. In this paper, we provide a comprehensive survey on the fundamentals, architectures, and applications of these two emerging antenna technologies. First, we provide a chronological overview of the parallel historical development of both RA and MA technologies. Next, we review and classify the state-of-the-art hardware architectures for implementing RAs and MAs, followed by a detailed comparison of their distinct mechanisms, performance metrics, and functionalities. Subsequently, we focus on various applications of RAs and MAs in wireless communication systems, analyzing their respective performance advantages and key design considerations such as mode selection, movement optimization, and channel acquisition. We also explore the significant roles of RAs and MAs in advancing wireless sensing and integrated sensing and communication (ISAC). Furthermore, we present numerical performance comparisons to illustrate the distinct characteristics and complementary advantages of RA and MA systems. Finally, we outline key challenges and identify promising future research directions to inspire further innovations in this burgeoning field.

eess.SP↗

arXiv2026

Channel Gain Map Reconstruction Based on Virtual Scatterer Model

This paper proposes an efficient method for modeling and reconstructing the channel gain map (CGM) based on virtual scatterers. Specifically, we develop a virtual scatterer model to characterize the channel power gain distribution in three-dimensional (3D) space, by capturing the multi-path propagation environment structure and exploiting the angular-domain spatial correlation of scatterer response. In this model, the CGM is represented as a function over a set of tunable parameters for virtual scatterers, including their number, positions, and scatterer response coefficients (SRCs), which can be estimated from a limited number of channel power gain measurements at a given set of locations within the region of interest. This new representation offers a flexible and scalable modeling framework for efficient and accurate CGM reconstruction. Furthermore, we propose a progressive estimation algorithm to acquire the scatterers' parameters. In this algorithm, we gradually increase the number of virtual scatterers to balance the computational complexity and estimation accuracy. In addition, by exploiting the spatial correlation of scatterer response, we propose a Gaussian process regression (GPR)-based inference method to predict the SRCs that cannot be directly estimated. Finally, ray-tracing-based simulation results under realistic physical environments validate the effectiveness of the proposed method, demonstrating that it achieves higher reconstruction accuracy compared to conventional CGM estimation approaches.

cs.IT↗

arXiv2026

Deep learning based Channel Estimation and Beamforming in Movable Antenna Systems

Movable antenna (MA) has emerged as a promising technology for future wireless systems. Compared with traditional fixed-position antennas, MA improves system performance by antenna movement to optimize channel conditions. For multiuser wideband MA systems, this paper proposes deep learning-based framework integrating channel estimation (CE), antenna position optimization, and beamforming, with a clear workflow and enhanced efficiency. Specifically, to obtain accurate channel state information (CSI), we design a two-stage CE mechanism: first reconstructing the channel matrix from limited measurements via compressive sensing, then introducing a Swin-Transformer-based denoising network to refine CE accuracy for subsequent optimization. Building on this, we address the joint optimization challenge by proposing a Transformer-based network that intelligently maps CSI sequences of candidate positions to optimal MA positions while combining a model-driven weighted minimum mean square error (WMMSE) beamforming approach to achieve better performance. Simulation results demonstrate that the proposed methods achieve superior performance compared with existing counterparts under various conditions. The codes about this work are available at https://github.com/ZiweiWan/Code-4-DL-MA-CE-BF.

cs.IT↗