arXiv subjects

Liqun Fu

Publications and source records attributed to Liqun Fu.

46 records · Page 3Linked to original sources

arXiv2021

Placement Optimization and Power Control in Intelligent Reflecting Surface Aided Multiuser System

Intelligent reflecting surface (IRS) is a new and revolutionary technology capable of reconfiguring the wireless propagation environment by controlling its massive low-cost passive reflecting elements. Different from prior works that focus on optimizing IRS reflection coefficients or single-IRS placement, we aim to maximize the minimum throughput of a single-cell multiuser system aided by multiple IRSs, by joint multi-IRS placement and power control at the access point (AP), which is a mixed-integer non-convex problem with drastically increased complexity with the number of IRSs/users. To tackle this challenge, a ring-based IRS placement scheme is proposed along with a power control policy that equalizes the users' non-outage probability. An efficient searching algorithm is further proposed to obtain a close-to-optimal solution for arbitrary number of IRSs/rings. Numerical results validate our analysis and show that our proposed scheme significantly outperforms the benchmark schemes without IRS and/or with other power control policies. Moreover, it is shown that the IRSs are preferably deployed near AP for coverage range extension, while with more IRSs, they tend to spread out over the cell to cover more and get closer to target users.

cs.IT↗

arXiv2020

Federated Learning via Intelligent Reflecting Surface

Over-the-air computation (AirComp) based federated learning (FL) is capable of achieving fast model aggregation by exploiting the waveform superposition property of multiple access channels. However, the model aggregation performance is severely limited by the unfavorable wireless propagation channels. In this paper, we propose to leverage intelligent reflecting surface (IRS) to achieve fast yet reliable model aggregation for AirComp-based FL. To optimize the learning performance, we formulate an optimization problem that jointly optimizes the device selection, the aggregation beamformer at the base station (BS), and the phase shifts at the IRS to maximize the number of devices participating in the model aggregation of each communication round under certain mean-squared-error (MSE) requirements. To tackle the formulated highly-intractable problem, we propose a two-step optimization framework. Specifically, we induce the sparsity of device selection in the first step, followed by solving a series of MSE minimization problems to find the maximum feasible device set in the second step. We then propose an alternating optimization framework, supported by the difference-of-convex-functions programming algorithm for low-rank optimization, to efficiently design the aggregation beamformers at the BS and phase shifts at the IRS. Simulation results will demonstrate that our proposed algorithm and the deployment of an IRS can achieve a lower training loss and higher FL prediction accuracy than the baseline algorithms.

cs.IT↗

arXiv2020

Achieving Max-Min Throughput in LoRa Networks

With growing popularity, LoRa networks are pivotally enabling Long Range connectivity to low-cost and power-constrained user equipments (UEs). Due to its wide coverage area, a critical issue is to effectively allocate wireless resources to support potentially massive UEs in the cell while resolving the prominent near-far fairness problem for cell-edge UEs, which is challenging to address due to the lack of tractable analytical model for the LoRa network and its practical requirement for low-complexity and low-overhead design. To achieve massive connectivity with fairness, we investigate the problem of maximizing the minimum throughput of all UEs in the LoRa network, by jointly designing high-level policies of spreading factor (SF) allocation, power control, and duty cycle adjustment based only on average channel statistics and spatial UE distribution. By leveraging on the Poisson rain model along with tailored modifications to our considered LoRa network, we are able to account for channel fading, aggregate interference and accurate packet overlapping, and still obtain a tractable and yet accurate closed-form formula for the packet success probability and hence throughput. We further propose an iterative balancing (IB) method to allocate the SFs in the cell such that the overall max-min throughput can be achieved within the considered time period and cell area. Numerical results show that the proposed scheme with optimized design greatly alleviates the near-far fairness issue, and significantly improves the cell-edge throughput.

cs.IT↗

arXiv2020

The optimal network throughputs when the model-aware node coexists with other nodes using different MAC protocols

In this document, we give the optimal network throughput when the DR-DLMA node (see our paper for definition) coexists with the nodes using other protocol (e.g., TDMA and/or ALOHA). Then we use the optimal network throughput as the benchmark for our paper. The simulation results in our paper demonstrated that the DR-DLMA node can achieve performance similar to that of the model-aware node.

cs.NI↗

arXiv2020

Federated Machine Learning for Intelligent IoT via Reconfigurable Intelligent Surface

Intelligent Internet-of-Things (IoT) will be transformative with the advancement of artificial intelligence and high-dimensional data analysis, shifting from "connected things" to "connected intelligence". This shall unleash the full potential of intelligent IoT in a plethora of exciting applications, such as self-driving cars, unmanned aerial vehicles, healthcare, robotics, and supply chain finance. These applications drive the need of developing revolutionary computation, communication and artificial intelligence technologies that can make low-latency decisions with massive real-time data. To this end, federated machine learning, as a disruptive technology, is emerged to distill intelligence from the data at network edge, while guaranteeing device privacy and data security. However, the limited communication bandwidth is a key bottleneck of model aggregation for federated machine learning over radio channels. In this article, we shall develop an over-the-air computation based communication-efficient federated machine learning framework for intelligent IoT networks via exploiting the waveform superposition property of a multi-access channel. Reconfigurable intelligent surface is further leveraged to reduce the model aggregation error via enhancing the signal strength by reconfiguring the wireless propagation environments.

eess.SP↗

arXiv2020

Placement Optimization of Aerial Base Stations with Deep Reinforcement Learning

Unmanned aerial vehicles (UAVs) can be utilized as aerial base stations (ABSs) to assist terrestrial infrastructure for keeping wireless connectivity in various emergency scenarios. To maximize the coverage rate of N ground users (GUs) by jointly placing multiple ABSs with limited coverage range is known to be a NP-hard problem with exponential complexity in N. The problem is further complicated when the coverage range becomes irregular due to site-specific blockage (e.g., buildings) on the air-ground channel in the 3-dimensional (3D) space. To tackle this challenging problem, this paper applies the Deep Reinforcement Learning (DRL) method by 1) representing the state by a coverage bitmap to capture the spatial correlation of GUs/ABSs, whose dimension and associated neural network complexity is invariant with arbitrarily large N; and 2) designing the action and reward for the DRL agent to effectively learn from the dynamic interactions with the complicated propagation environment represented by a 3D Terrain Map. Specifically, a novel two-level design approach is proposed, consisting of a preliminary design based on the dominant line-of-sight (LoS) channel model, and an advanced design to further refine the ABS positions based on site-specific LoS/non-LoS channel states. The double deep Q-network (DQN) with Prioritized Experience Replay (Prioritized Replay DDQN) algorithm is applied to train the policy of multi-ABS placement decision. Numerical results show that the proposed approach significantly improves the coverage rate in complex environment, compared to the benchmark DQN and K-means algorithms.

cs.IT↗

arXiv2015

Energy efficient D2D communications in dynamic TDD systems

Network-assisted device-to-device communication is a promising technology for improving the performance of proximity-based services. This paper demonstrates how the integration of device-to-device communications and dynamic time-division duplex can improve the energy efficiency of future cellular networks, leading to a greener system operation and a prolonged battery lifetime of mobile devices. We jointly optimize the mode selection, transmission period and power allocation to minimize the energy consumption (from both a system and a device perspective) while satisfying a certain rate requirement. The radio resource management problems are formulated as mixed-integer nonlinear programming problems. Although they are known to be NP-hard in general, we exploit the problem structure to design efficient algorithms that optimally solve several problem cases. For the remaining cases, a heuristic algorithm that computes near-optimal solutions while respecting practical constraints on execution times and signaling overhead is also proposed. Simulation results confirm that the combination of device-to-device and flexible time-division-duplex technologies can significantly enhance spectrum and energy-efficiency of next generation cellular systems.

cs.IT↗

arXiv2011

Link Scheduling in Multi-Transmit-Receive Wireless Networks

This paper investigates the problem of link scheduling to meet traffic demands with minimum airtime in a multi-transmit-receive (MTR) wireless network. MTR networks are a new class of networks, in which each node can simultaneously transmit to a number of other nodes, or simultaneously receive from a number of other nodes. The MTR capability can be enabled by the use of multiple directional antennas or multiple channels. Potentially, MTR can boost the network capacity significantly. However, link scheduling that makes full use of the MTR capability must be in place before this can happen. We show that optimal link scheduling can be formulated as a linear program (LP). However, the problem is NP-hard because we need to find all the maximal independent sets in a graph first. We propose two computationally efficient algorithms, called Heavy-Weight-First (HWF) and Max-Degree-First (MDF) to solve this problem. Simulation results show that both HWF and MDF can achieve superior performance in terms of runtime and optimality.

cs.NI↗

arXiv2009

Effective Carrier Sensing in CSMA Networks under Cumulative Interference

This paper proposes and investigates the concept of a safe carrier-sensing range that can guarantee interference safe (also termed hidden-node-free) transmissions in CSMA networks under the cumulative interference model. Compared with the safe carrier-sensing range under the commonly assumed but less realistic pairwise interference model, we show that the safe carrier-sensing range required under the cumulative interference model is larger by a constant multiplicative factor. The concept of a safe carrier-sensing range, although amenable to elegant analytical results, is inherently not compatible with the conventional power threshold carrier-sensing mechanism (e.g., that used in IEEE 802.11). Specifically, the absolute power sensed by a node in the conventional mechanism does not contain enough information for it to derive its distances from other concurrent transmitter nodes. We show that, fortunately, a carrier-sensing mechanism called Incremental-Power Carrier-Sensing (IPCS) can realize the carrier-sensing range concept in a simple way. Instead of monitoring the absolute detected power, the IPCS mechanism monitors every increment in the detected power. This means that IPCS can separate the detected power of every concurrent transmitter, and map the power profile to the required distance information.

cs.NI↗

arXiv2009

Safe Carrier Sensing Range in CSMA Network under Physical Interference Model

In this paper, we study the setting of carrier-sensing range in 802.11 networks under the (cumulative) physical interference model. Specifically, we identify a carrier-sensing range that will prevent collisions in 802.11 networks due to carrier-sensing failure under the physical interference model. We find that the carrier-sensing range required under the physical interference model must be larger than that required under the protocol (pairwise) interference model by a multiplicative factor. For example, if the SINR requirement is 10dB and the path-loss exponent is 4, the factor is 1.4. Furthermore, given a fixed pathloss exponent of 4, the factor increases as the SINR requirement increases. However, the limit of the factor is 1.84 as the SINR requirement goes to infinity.

cs.NI↗