arXiv subjects

Liuchi Li

Publications and source records attributed to Liuchi Li.

5 recordsLinked to original sources

arXiv2026

Geometry-mediated shear softening in dense ordered granular packings

Shearing a packing of solid granular grains can be difficult, especially when the solid fraction is high and the boundary confinement is strong. It was recently shown that embedding voids in grains can make a packing easier to shear when such voids make the grains auxetic. Here, we use finite element simulation to show that auxeticity is not a necessary condition even in a seemingly very constrained setting: shearing dense and ordered granular packings under a constant solid fraction. More specifically, by controlling the geometry of a void embedded in a grain, we induce an apparent elastic anisotropy and softening of the grain under shear, which collectively leads to a significant reduction -- up to 90\% -- of the apparent shear modulus of a packing of these grains. Complementary analysis shows that this reduction correlates well with a decrease in contact-force anisotropy, and is insensitive to system size and contact friction variation. Our results highlight how grain-scale geometry, mediated by multi-body contact mechanics, modulates macroscopic system-scale elasticity, providing a minimal design mechanism towards targeted collective mechanical properties of soft granular metamaterials.

cond-mat.soft↗

arXiv2024

Polycatenated Architected Materials

Architected materials derive their properties from the geometric arrangement of their internal structural elements. Their designs rely on continuous networks of members to control the global mechanical behavior of the bulk. Here, we introduce a class of materials that consist of discrete concatenated rings or cage particles interlocked in three-dimensional networks, forming polycatenated architected materials (PAMs). We propose a general design framework that translates arbitrary crystalline networks into particles' concatenations and geometries. In response to small external loads, PAMs behave like non-Newtonian fluids, showing both shear-thinning and shear-thickening responses. At larger strains, PAMs behave like lattices and foams, with a nonlinear stress-strain relation. At microscale, we demonstrate that PAMs can change their shapes in response to applied electrostatic charges. PAM's unique properties pave the path for developing stimuli-responsive materials, energy-absorbing systems and morphing architectures.

cond-mat.soft↗

arXiv2023

Shack-Hartmann wavefront sensing: A new approach to time-resolved measurement of stress intensity during dynamic fracture of small brittle specimens

The stress intensity factor is important for understanding crack initiation and propagation. Because it cannot be measured directly, the characterization of the stress intensity factor relies on the measurement of deformation around a crack tip. Such measurements are challenging for dynamic fracture of brittle materials where the deformation is small and the crack tip velocity can be high (>1 km/s). Digital gradient sensing (DGS) is capable of full-field measurement of surface deformation with sub-microsecond temporal resolution, but it is limited to centimeter-scale specimens and has a spatial resolution of only $\sim 1$mm. This limits its ability to measure deformations close to the crack tip. Here, we demonstrate the potential of Shack-Hartmann wavefront sensing (SHWFS), as an alternative to DGS, for measuring surface deformation during dynamic brittle fracture of millimeter-scale specimens. Using an commercial glass ceramic as an example material, we demonstrate the capability of SHWFS to measure the surface slope evolution induced by a propagating crack on millimeter-scale specimens with a micrometer-scale spatial resolution and a sub-microsecond temporal resolution. The SHWFS apparatus has the additional advantage of being physically more compact than a typical DGS apparatus. We verify our SHWFS measurements by comparing them with analytical predictions and phase-field simulations of the surface slope around a crack tip. Then, fitting the surface slope measurements to the asymptotic crack-tip field solution, we extract the evolution of the apparent stress intensity factor associated with the propagating crack tip. We conclude by discussing potential future enhancements of this technique and how its compactness could enable the integration with other characterization techniques including x-ray phase-contrast imaging (XPCI) toward a multi-modal characterization.

cond-mat.mtrl-sci↗

arXiv2023

Meso-scale size effects of material heterogeneities on crack propagation in brittle solids: Perspectives from phase-field simulations

Brittle solids are often toughened by adding a second-phase material. This practice often results in composites with material heterogeneities on the meso scale: large compared to the scale of the process zone but small compared to that of the application. The specific configuration (both geometrical and mechanical) of this mesoscale heterogeneity is generally recognized as important in determining crack propagation and, subsequently, the (effective) toughness of the composite. Here, we systematically investigate how dynamic crack propagation is affected by mesoscale heterogeneities taking the form of an array of inclusions. Using a variational phase-field approach, we compute the apparent crack speed and fracture energy dissipation rate to compare crack propagation under Mode-I loading across different configurations of these inclusions. If fixing the volume fraction of inclusions, matching the inclusion size to the K-dominance zone size gives rise to the best toughening outcome. Conversely, if varying the volume fraction of inclusions, a lower volume fraction configuration can lead to a better toughening outcome if and only if the inclusion size approaches from above the size of the K-dominance zone. Since the size of the K-dominance zone can be estimated \textit{a priori} given an understanding of the application scenario and material availability, we can, in principle, exploit this estimation to design a material's mesoscale heterogeneity that optimally balances the tradeoff between strength and toughness. This paves the way for realizing functional (meta-)materials against crack propagation in extreme environments.

cond-mat.mtrl-sci↗

arXiv2021

Emerging contact force heterogeneity in ordered soft granular media

Under external perturbations, inter-particle forces in disordered granular media are well known to form a heterogeneous distribution with filamentary patterns. Better understanding these forces and the distribution is important for predicting the collective behavior of granular media, the media second only to water as the most manipulated material in global industry. However, studies in this regard so far have been largely confined to granular media exhibiting only geometric heterogeneity, leaving the dimension of mechanical heterogeneity a rather uncharted area. Here, through a FEM contact mechanics model, we show that a heterogeneous inter-particle force distribution can also emerge from the dimension of mechanical heterogeneity alone. Specifically, we numerically study inter-particle forces in packing of mechanically heterogeneous disks arranged over either a square or a hexagonal lattice and under quasi-static isotropic compression. Our results show that, a hexagonal packing exhibit a more heterogeneous inter-particle force distribution than a square packing does. For both packing lattices, preliminary analysis shows the consistent coexistence of outliers (i.e., softer disks sustaining larger forces while stiffer disks sustaining smaller forces) in comparison to their homogeneous counterparts, which implies the existence of nonlocal effect. Further analysis on the portion of outliers and on spatial contact force correlations suggest that the hexagonal packing shows more pronounced nonlocal effect over the square packing under small mechanical heterogeneity. However, such trend is reversed when assemblies becomes more mechanically heterogeneous. Lastly, we confirm that, in the absence of particle reorganization events, contact friction merely plays the role of packing stabilization while its variation has little effect on inter-particle forces and their distribution.

cond-mat.soft↗