SearcharxivSearch

arXiv subjects

Lorenzo Aiello

Publications and source records attributed to Lorenzo Aiello.

7 recordsLinked to original sources

High-Stability Deformable Mirrors for Correcting Non-Axisymmetric Residual Aberrations in Thermal Compensation of Future Gravitational Wave Interferometers

In gravitational wave detectors, optical aberrations arise mainly from laser absorption in coatings and production process defects in the optics along the laser path. If left uncorrected, these optical path distortions drive the interferometer away from its optimal working point, degrading both stability and sensitivity. Future instruments such as the Einstein Telescope high-frequency detector will operate with unprecedented circulating power, further amplifying the aberration budget. In the current detectors Advanced Virgo and Advanced LIGO, the axisymmetric distortions are corrected using thermal actuators and CO2 laser projectors, however, non-axisymmetric wavefront distortions remain unmitigated. Deformable mirrors are investigated as a flexible solution for mitigating such defects: by shaping the CO2 beam phase upon reflection, they can imprint the required asymmetric intensity pattern on the lensing optics without introducing frequency dependent noise. The target phase map is computed via a modified Gerchberg-Saxton algorithm. We present simulations of this projection strategy and experimental validation demonstrating consistent reproduction of the desired intensity patterns.

gr-qc

Broadband limits on stochastic length fluctuations from a pair of table-top interferometers

The Quantum-Enhanced Space-Time (QUEST) experiment consists of a pair of co-located Power Recycled Michelson Interferometers, each designed to have a broadband, shot-noise limited displacement sensitivity of $2\times10^{-19}$ $\mathrm{m/\sqrt{Hz}}$ from 1 to 200 MHz. Here we present the first results of QUEST that set new upper limits on correlated length fluctuations from 13 to 80 MHz, constituting the first broadband constraints for a stochastic gravitational wave background at these frequencies. In a coincident observing run of $10^{4}$ s the averaging of the cross-correlation spectra between the two interferometer signals resulted in a strain sensitivity of $3\times10^{-20}$ $\mathrm{1/\sqrt{Hz}}$ at 40 MHz, making QUEST the most sensitive table-top interferometric system to date.

gr-qc

Searching for scalar field dark matter with LIGO

We report on a direct search for scalar field dark matter using data from LIGO's third observing run. We analyse the coupling of size oscillations of the interferometer's beamsplitter and arm test masses that may be caused by scalar field dark matter. Using new efficient search methods to maximise sensitivity for signatures of such oscillations, we set new upper limits for the coupling constants of scalar field dark matter as a function of its mass, which improve upon bounds from previous direct searches by several orders of magnitude in a frequency band from 10 Hz to 180 Hz.

astro-ph.CO

Probing dark matter with polarimetry techniques

In this work, we propose polarimetry experiments to search for low-mass (sub-eV) bosonic field dark matter, including axions and axion-like particles. We show that a polarimetry configuration consisting of a thick birefringent solid inside a Fabry-Pérot cavity is exceptionally sensitive to scalar field dark matter, which may cause oscillatory variations in the solid's thickness and refractive index. In addition, we show that a reconfiguration of this polarimetry experiment, in which two quarter-wave plates are placed inside the Fabry-Pérot cavity instead of a thick birefringent solid, is very sensitive to axion-like particles. We investigate the possibility of using cross-correlation of twin polarimeters to increase the sensitivity of the experiment, which in turn could allow us to explore unexplored parts of the parameter space and potentially detect a signal in either dark matter scenario.

hep-ph

Constraints on scalar field dark matter from co-located Michelson interferometers

Low-mass (sub-eV) scalar field dark matter may induce apparent oscillations of fundamental constants, resulting in corresponding oscillations of the size and the index of refraction of solids. Laser interferometers are highly sensitive to changes in the size and index of refraction of the main beamsplitter. Using cross-correlated data of the Fermilab Holometer instrument, which consists of twin co-located 40-m arm length power-recycled interferometers, we investigate the possible existence of scalar field dark matter candidates in the mass range between 1.6$\cdot$10$^{-12}$ eV and 1.0$\cdot$10$^{-7}$ eV. We set new upper limits for the coupling parameters of scalar field dark matter, improving on limits from previous direct searches by up to three orders of magnitude.

gr-qc

Optimisation of table-top 3D interferometers for Observational Quantum Gravity

With the use of twin, co-located, 3D interferometers, Cardiff University's Gravity Exploration Institute aims to observe quantum fluctuations of space-time as predicted by some theories of quantum gravity. Our design displacement sensitivity exceeds that of previous similar experiments, which have constrained the magnitudes of the fluctuations in the 1-25 MHz band. The increased sensitivity comes in large part from the comparably higher circulating power we aim to achieve, which reduces the overall shot noise. One complication of higher circulating power is an increase in contrast defect light, which includes higher-order modes. We will use the DC-readout scheme, whose dark-fringe offset must sufficiently dominate the contrast defect in order to detect faint signals. However, too much total output power risks saturating the high-bandwidth photodetectors. Suppressing the higher-order mode content of the contrast defect is a key strategy to realising the high circulating power and eliminating non-signal-carrying power that contributes to shot noise. For this, the inclusion of an output mode cleaner, whose design is described, is required.

astro-ph.IM

An Experiment for Observing Quantum Gravity Phenomena using Twin Table-Top 3D Interferometers

Theories of quantum gravity based on the holographic principle predict the existence of quantum fluctuations of distance measurements that accumulate and exhibit correlations over macroscopic distances. This paper models an expected signal due to this phenomenology, and details the design and estimated sensitivity of co-located twin table-top 3D interferometers being built to measure or constrain it. The experiment is estimated to be sensitive to displacements $\sim10^{-19}\,\rm{m}/\sqrt{\rm{Hz}}$ in a frequency band between 1 and 250 MHz, surpassing previous experiments and enabling the possible observation of quantum gravity phenomena. The experiment will also be sensitive to MHz gravitational waves and various dark matter candidates.

gr-qc