arXiv subjects

Luca Benini

Publications and source records attributed to Luca Benini.

At least 199 records · Page 11Linked to original sources

arXiv2024

H-Watch: An Open, Connected Platform for AI-Enhanced COVID19 Infection Symptoms Monitoring and Contact Tracing

The novel COVID-19 disease has been declared a pandemic event. Early detection of infection symptoms and contact tracing are playing a vital role in containing COVID-19 spread. As demonstrated by recent literature, multi-sensor and connected wearable devices might enable symptom detection and help tracing contacts, while also acquiring useful epidemiological information. This paper presents the design and implementation of a fully open-source wearable platform called H-Watch. It has been designed to include several sensors for COVID-19 early detection, multi-radio for wireless transmission and tracking, a microcontroller for processing data on-board, and finally, an energy harvester to extend the battery lifetime. Experimental results demonstrated only 5.9 mW of average power consumption, leading to a lifetime of 9 days on a small watch battery. Finally, all the hardware and the software, including a machine learning on MCU toolkit, are provided open-source, allowing the research community to build and use the H-Watch.

eess.SY↗

arXiv2024

Distilling Tiny and Ultra-fast Deep Neural Networks for Autonomous Navigation on Nano-UAVs

Nano-sized unmanned aerial vehicles (UAVs) are ideal candidates for flying Internet-of-Things smart sensors to collect information in narrow spaces. This requires ultra-fast navigation under very tight memory/computation constraints. The PULP-Dronet convolutional neural network (CNN) enables autonomous navigation running aboard a nano-UAV at 19 frame/s, at the cost of a large memory footprint of 320 kB -- and with drone control in complex scenarios hindered by the disjoint training of collision avoidance and steering capabilities. In this work, we distill a novel family of CNNs with better capabilities than PULP-Dronet, but memory footprint reduced by up to 168x (down to 2.9 kB), achieving an inference rate of up to 139 frame/s; we collect a new open-source unified collision/steering 66 k images dataset for more robust navigation; and we perform a thorough in-field analysis of both PULP-Dronet and our tiny CNNs running on a commercially available nano-UAV. Our tiniest CNN, called Tiny-PULP-Dronet v3, navigates with a 100% success rate a challenging and never-seen-before path, composed of a narrow obstacle-populated corridor and a 180° turn, at a maximum target speed of 0.5 m/s. In the same scenario, the SoA PULP-Dronet consistently fails despite having 168x more parameters.

eess.IV↗

arXiv2024

Spatzformer: An Efficient Reconfigurable Dual-Core RISC-V V Cluster for Mixed Scalar-Vector Workloads

Multi-core vector processor architectures excel in handling computationally intensive vectorizable tasks but struggle to achieve optimal resource utilization when facing sequential and control tasks that cannot be vectorized. This work presents Spatzformer, the first reconfigurable RISC-V V (RVV) architecture developed from a baseline open-source dual-core cluster based on Snitch scalar cores augmented with compact Spatz vector units. Spatzformer operates in two distinct modes: split mode, working as a dual-core vector architecture to handle vectorizable tasks concurrently, and merge mode, where two vector units are driven by a single scalar core, allowing the remaining scalar core to handle non-vectorizable control tasks. We implement Spatzformer in a 12-nm technology node and characterize the cost of the added architectural reconfigurability. We show that merge mode accelerates mixed scalar-vector kernels by up to 1.8x compared to split mode. Moreover, it accelerates the vector kernels that require fine-grained synchronization (such as FFT) by up to 20% with respect to the baseline. The reconfigurability features do not degrade the architecture's maximum frequency (1.2GHz, TT, 0.8V, 25C) and have a negligible area impact (+1.4%), with a worst-case energy efficiency drop of only 7% with respect to the non-reconfigurable baseline.

cs.AR↗

arXiv2024

Compressed Latent Replays for Lightweight Continual Learning on Spiking Neural Networks

Rehearsal-based Continual Learning (CL) has been intensely investigated in Deep Neural Networks (DNNs). However, its application in Spiking Neural Networks (SNNs) has not been explored in depth. In this paper we introduce the first memory-efficient implementation of Latent Replay (LR)-based CL for SNNs, designed to seamlessly integrate with resource-constrained devices. LRs combine new samples with latent representations of previously learned data, to mitigate forgetting. Experiments on the Heidelberg SHD dataset with Sample and Class-Incremental tasks reach a Top-1 accuracy of 92.5% and 92%, respectively, without forgetting the previously learned information. Furthermore, we minimize the LRs' requirements by applying a time-domain compression, reducing by two orders of magnitude their memory requirement, with respect to a naive rehearsal setup, with a maximum accuracy drop of 4%. On a Multi-Class-Incremental task, our SNN learns 10 new classes from an initial set of 10, reaching a Top-1 accuracy of 78.4% on the full test set.

cs.NE↗

arXiv2024

Tiny-PULP-Dronets: Squeezing Neural Networks for Faster and Lighter Inference on Multi-Tasking Autonomous Nano-Drones

Pocket-sized autonomous nano-drones can revolutionize many robotic use cases, such as visual inspection in narrow, constrained spaces, and ensure safer human-robot interaction due to their tiny form factor and weight -- i.e., tens of grams. This compelling vision is challenged by the high level of intelligence needed aboard, which clashes against the limited computational and storage resources available on PULP (parallel-ultra-low-power) MCU class navigation and mission controllers that can be hosted aboard. This work moves from PULP-Dronet, a State-of-the-Art convolutional neural network for autonomous navigation on nano-drones. We introduce Tiny-PULP-Dronet: a novel methodology to squeeze by more than one order of magnitude model size (50x fewer parameters), and number of operations (27x less multiply-and-accumulate) required to run inference with similar flight performance as PULP-Dronet. This massive reduction paves the way towards affordable multi-tasking on nano-drones, a fundamental requirement for achieving high-level intelligence.

cs.RO↗

arXiv2024

BISeizuRe: BERT-Inspired Seizure Data Representation to Improve Epilepsy Monitoring

This study presents a novel approach for EEG-based seizure detection leveraging a BERT-based model. The model, BENDR, undergoes a two-phase training process. Initially, it is pre-trained on the extensive Temple University Hospital EEG Corpus (TUEG), a 1.5 TB dataset comprising over 10,000 subjects, to extract common EEG data patterns. Subsequently, the model is fine-tuned on the CHB-MIT Scalp EEG Database, consisting of 664 EEG recordings from 24 pediatric patients, of which 198 contain seizure events. Key contributions include optimizing fine-tuning on the CHB-MIT dataset, where the impact of model architecture, pre-processing, and post-processing techniques are thoroughly examined to enhance sensitivity and reduce false positives per hour (FP/h). We also explored custom training strategies to ascertain the most effective setup. The model undergoes a novel second pre-training phase before subject-specific fine-tuning, enhancing its generalization capabilities. The optimized model demonstrates substantial performance enhancements, achieving as low as 0.23 FP/h, 2.5$\times$ lower than the baseline model, with a lower but still acceptable sensitivity rate, showcasing the effectiveness of applying a BERT-based approach on EEG-based seizure detection.

cs.LG↗

arXiv2024

GAP9Shield: A 150GOPS AI-capable Ultra-low Power Module for Vision and Ranging Applications on Nano-drones

The evolution of AI and digital signal processing technologies, combined with affordable energy-efficient processors, has propelled the development of both hardware and software for drone applications. Nano-drones, which fit into the palm of the hand, are suitable for indoor environments and safe for human interaction; however, they often fail to deliver the required performance for complex tasks due to the lack of hardware providing sufficient sensing and computing performance. Addressing this gap, we present the GAP9Shield, a nano-drone-compatible module powered by the GAP9, a 150GOPS-capable SoC. The system also includes a 5MP OV5647 camera for high-definition imaging, a WiFi-BLE NINA module, and a 5D VL53L1-based ranging subsystem, which enhances obstacle avoidance capabilities. In comparison with similarly targeted state-of-the-art systems, GAP9Shield provides a 20% higher sample rate (RGB images) while offering a 20% weight reduction. In this paper, we also highlight the energy efficiency and processing power capabilities of GAP9 for object detection (YOLO), localization, and mapping, which can run within a power envelope of below 100 mW and at low latency (as 17 ms for object detection), highlighting the transformative potential of GAP9 for the new generation of nano-drone applications.

cs.RO↗

arXiv2024

Occamy: A 432-Core 28.1 DP-GFLOP/s/W 83% FPU Utilization Dual-Chiplet, Dual-HBM2E RISC-V-based Accelerator for Stencil and Sparse Linear Algebra Computations with 8-to-64-bit Floating-Point Support in 12nm FinFET

We present Occamy, a 432-core RISC-V dual-chiplet 2.5D system for efficient sparse linear algebra and stencil computations on FP64 and narrow (32-, 16-, 8-bit) SIMD FP data. Occamy features 48 clusters of RISC-V cores with custom extensions, two 64-bit host cores, and a latency-tolerant multi-chiplet interconnect and memory system with 32 GiB of HBM2E. It achieves leading-edge utilization on stencils (83 %), sparse-dense (42 %), and sparse-sparse (49 %) matrix multiply.

cs.AR↗

arXiv2024

Basilisk: An End-to-End Open-Source Linux-Capable RISC-V SoC in 130nm CMOS

Open-source hardware (OSHW) is rapidly gaining traction in academia and industry. The availability of open RTL descriptions, EDA tools, and even PDKs enables a fully auditable supply chain for end-to-end (RTL to layout) open-source silicon, significantly strengthening security and transparency. Despite promising developments, existing OSHW efforts have so far fallen short of producing end-to-end open-source SoCs at the complexity and performance level needed to run a general-purpose OS. We present Basilisk, the first end-to-end open-source, Linux-capable RISC-V SoC taped out in IHP's open 130 nm technology. Basilisk features a 64-bit RISC-V core, a fully digital HyperRAM DRAM controller, and a rich set of IO peripherals including USB 1.1 and VGA. To tape out Basilisk, we create a reusable tool pipeline to convert its industry-grade SystemVerilog description to Verilog. We optimized logic synthesis in the open source Yosys synthesis tool, obtaining an increase in Basilisk's peak clock speed by 2.3x to 77 MHz and reducing its cell area by 1.6x to 1.1 MGE while also reducing synthesis runtime and RAM usage. We further optimized place and route in OpenROAD, enabling convergence to zero DRC violations while increasing core area utilization by 10% and reducing die area by 12%.

cs.AR↗

arXiv2024

A Tiny Transformer for Low-Power Arrhythmia Classification on Microcontrollers

Wearable systems for the continuous and real-time monitoring of cardiovascular diseases are becoming widespread and valuable assets in diagnosis and therapy. A promising approach for real-time analysis of the electrocardiographic (ECG) signal and the detection of heart conditions, such as arrhythmia, is represented by the transformer machine learning model. Transformers are powerful models for the classification of time series, although efficient implementation in the wearable domain raises significant design challenges, to combine adequate accuracy and a suitable complexity. In this work, we present a tiny transformer model for the analysis of the ECG signal, requiring only 6k parameters and reaching 98.97% accuracy in the recognition of the 5 most common arrhythmia classes from the MIT-BIH Arrhythmia database, assessed considering 8-bit integer inference as required for efficient execution on low-power microcontroller-based devices. We explored an augmentation-based training approach for improving the robustness against electrode motion artifacts noise, resulting in a worst-case post-deployment performance assessment of 98.36% accuracy. Suitability for wearable monitoring solutions is finally demonstrated through efficient deployment on the parallel ultra-low-power GAP9 processor, where inference execution requires 4.28ms and 0.09mJ.

eess.SP↗

arXiv2024

Low Latency Visual Inertial Odometry with On-Sensor Accelerated Optical Flow for Resource-Constrained UAVs

Visual Inertial Odometry (VIO) is the task of estimating the movement trajectory of an agent from an onboard camera stream fused with additional Inertial Measurement Unit (IMU) measurements. A crucial subtask within VIO is the tracking of features, which can be achieved through Optical Flow (OF). As the calculation of OF is a resource-demanding task in terms of computational load and memory footprint, which needs to be executed at low latency, especially in robotic applications, OF estimation is today performed on powerful CPUs or GPUs. This restricts its use in a broad spectrum of applications where the deployment of such powerful, power-hungry processors is unfeasible due to constraints related to cost, size, and power consumption. On-sensor hardware acceleration is a promising approach to enable low latency VIO even on resource-constrained devices such as nano drones. This paper assesses the speed-up in a VIO sensor system exploiting a compact OF sensor consisting of a global shutter camera and an Application Specific Integrated Circuit (ASIC). By replacing the feature tracking logic of the VINS-Mono pipeline with data from this OF camera, we demonstrate a 49.4% reduction in latency and a 53.7% reduction of compute load of the VIO pipeline over the original VINS-Mono implementation, allowing VINS-Mono operation up to 50 FPS instead of 20 FPS on the quad-core ARM Cortex-A72 processor of a Raspberry Pi Compute Module 4.

cs.CV↗

arXiv2024

Ara2: Exploring Single- and Multi-Core Vector Processing with an Efficient RVV 1.0 Compliant Open-Source Processor

Vector processing is highly effective in boosting processor performance and efficiency for data-parallel workloads. In this paper, we present Ara2, the first fully open-source vector processor to support the RISC-V V 1.0 frozen ISA. We evaluate Ara2's performance on a diverse set of data-parallel kernels for various problem sizes and vector-unit configurations, achieving an average functional-unit utilization of 95% on the most computationally intensive kernels. We pinpoint performance boosters and bottlenecks, including the scalar core, memories, and vector architecture, providing insights into the main vector architecture's performance drivers. Leveraging the openness of the design, we implement Ara2 in a 22nm technology, characterize its PPA metrics on various configurations (2-16 lanes), and analyze its microarchitecture and implementation bottlenecks. Ara2 achieves a state-of-the-art energy efficiency of 37.8 DP-GFLOPS/W (0.8V) and 1.35GHz of clock frequency (critical path: ~40 FO4 gates). Finally, we explore the performance and energy-efficiency trade-offs of multi-core vector processors: we find that multiple vector cores help overcome the scalar core issue-rate bound that limits short-vector performance. For example, a cluster of eight 2-lane Ara2 (16 FPUs) achieves more than 3x better performance than a 16-lane single-core Ara2 (16 FPUs) when executing a 32x32x32 matrix multiplication, with 1.5x improved energy efficiency.

cs.AR↗

arXiv2024

SALSA: Simulated Annealing based Loop-Ordering Scheduler for DNN Accelerators

To meet the growing need for computational power for DNNs, multiple specialized hardware architectures have been proposed. Each DNN layer should be mapped onto the hardware with the most efficient schedule, however, SotA schedulers struggle to consistently provide optimum schedules in a reasonable time across all DNN-HW combinations. This paper proposes SALSA, a fast dual-engine scheduler to generate optimal execution schedules for both even and uneven mapping. We introduce a new strategy, combining exhaustive search with simulated annealing to address the dynamic nature of the loop ordering design space size across layers. SALSA is extensively benchmarked against two SotA schedulers, LOMA and Timeloop on 5 different DNNs, on average SALSA finds schedules with 11.9% and 7.6% lower energy while speeding up the search by 1.7x and 24x compared to LOMA and Timeloop, respectively.

cs.AR↗

arXiv2024

HTVM: Efficient Neural Network Deployment On Heterogeneous TinyML Platforms

Optimal deployment of deep neural networks (DNNs) on state-of-the-art Systems-on-Chips (SoCs) is crucial for tiny machine learning (TinyML) at the edge. The complexity of these SoCs makes deployment non-trivial, as they typically contain multiple heterogeneous compute cores with limited, programmer-managed memory to optimize latency and energy efficiency. We propose HTVM - a compiler that merges TVM with DORY to maximize the utilization of heterogeneous accelerators and minimize data movements. HTVM allows deploying the MLPerf(TM) Tiny suite on DIANA, an SoC with a RISC-V CPU, and digital and analog compute-in-memory AI accelerators, at 120x improved performance over plain TVM deployment.

cs.PL↗

arXiv2024

A Gigabit, DMA-enhanced Open-Source Ethernet Controller for Mixed-Criticality Systems

The ongoing revolution in application domains targeting autonomous navigation, first and foremost automotive "zonalization", has increased the importance of certain off-chip communication interfaces, particularly Ethernet. The latter will play an essential role in next-generation vehicle architectures as the backbone connecting simultaneously and instantaneously the zonal/domain controllers. There is thereby an incumbent need to introduce a performant Ethernet controller in the open-source HW community, to be used as a proxy for architectural explorations and prototyping of mixed-criticality systems (MCSs). Driven by this trend, in this work, we propose a fully open-source, DMA-enhanced, technology-agnostic Gigabit Ethernet architecture that overcomes the limitations of existing open-source architectures, such as Lowrisc's Ethernet, often tied to FPGA implementation, performance-bound by sub-optimal design choices such as large memory buffers, and in general not mature enough to bridge the gap between academia and industry. Besides the area advantage, the proposed design increases packet transmission speed up to almost 3x compared to Lowrisc's and is validated through implementation and FPGA prototyping into two open-source, heterogeneous MCSs.

cs.AR↗

arXiv2024

TOP: Towards Open & Predictable Heterogeneous SoCs

Ensuring predictability in modern real-time Systems-on-Chip (SoCs) is an increasingly critical concern for many application domains such as automotive, robotics, and industrial automation. An effective approach involves the modeling and development of hardware components, such as interconnects and shared memory resources, to evaluate or enforce their deterministic behavior. Unfortunately, these IPs are often closed-source, and these studies are limited to the single modules that must later be integrated with third-party IPs in more complex SoCs, hindering the precision and scope of modeling and compromising the overall predictability. With the coming-of-age of open-source instruction set architectures (RISC-V) and hardware, major opportunities for changing this status quo are emerging. This study introduces an innovative methodology for modeling and analyzing State-of-the-Art (SoA) open-source SoCs for low-power cyber-physical systems. Our approach models and analyzes the entire set of open-source IPs within these SoCs and then provides a comprehensive analysis of the entire architecture. We validate this methodology on a sample heterogenous low-power RISC-V architecture through RTL simulation and FPGA implementation, minimizing pessimism in bounding the service time of transactions crossing the architecture between 28% and 1%, which is considerably lower when compared to similar SoA works.

cs.AR↗

arXiv2024

xTern: Energy-Efficient Ternary Neural Network Inference on RISC-V-Based Edge Systems

Ternary neural networks (TNNs) offer a superior accuracy-energy trade-off compared to binary neural networks. However, until now, they have required specialized accelerators to realize their efficiency potential, which has hindered widespread adoption. To address this, we present xTern, a lightweight extension of the RISC-V instruction set architecture (ISA) targeted at accelerating TNN inference on general-purpose cores. To complement the ISA extension, we developed a set of optimized kernels leveraging xTern, achieving 67% higher throughput than their 2-bit equivalents. Power consumption is only marginally increased by 5.2%, resulting in an energy efficiency improvement by 57.1%. We demonstrate that the proposed xTern extension, integrated into an octa-core compute cluster, incurs a minimal silicon area overhead of 0.9% with no impact on timing. In end-to-end benchmarks, we demonstrate that xTern enables the deployment of TNNs achieving up to 1.6 percentage points higher CIFAR-10 classification accuracy than 2-bit networks at equal inference latency. Our results show that xTern enables RISC-V-based ultra-low-power edge AI platforms to benefit from the efficiency potential of TNNs.

cs.AR↗

arXiv2024

Optimizing Foundation Model Inference on a Many-tiny-core Open-source RISC-V Platform

Transformer-based foundation models have become crucial for various domains, most notably natural language processing (NLP) or computer vision (CV). These models are predominantly deployed on high-performance GPUs or hardwired accelerators with highly customized, proprietary instruction sets. Until now, limited attention has been given to RISC-V-based general-purpose platforms. In our work, we present the first end-to-end inference results of transformer models on an open-source many-tiny-core RISC-V platform implementing distributed Softmax primitives and leveraging ISA extensions for SIMD floating-point operand streaming and instruction repetition, as well as specialized DMA engines to minimize costly main memory accesses and to tolerate their latency. We focus on two foundational transformer topologies, encoder-only and decoder-only models. For encoder-only models, we demonstrate a speedup of up to 12.8x between the most optimized implementation and the baseline version. We reach over 79% FPU utilization and 294 GFLOPS/W, outperforming State-of-the-Art (SoA) accelerators by more than 2x utilizing the HW platform while achieving comparable throughput per computational unit. For decoder-only topologies, we achieve 16.1x speedup in the Non-Autoregressive (NAR) mode and up to 35.6x speedup in the Autoregressive (AR) mode compared to the baseline implementation. Compared to the best SoA dedicated accelerator, we achieve 2.04x higher FPU utilization.

cs.DC↗