arXiv subjects

Luca Benini

Publications and source records attributed to Luca Benini.

At least 343 records · Page 19Linked to original sources

arXiv2022

FANN-on-MCU: An Open-Source Toolkit for Energy-Efficient Neural Network Inference at the Edge of the Internet of Things

The growing number of low-power smart devices in the Internet of Things is coupled with the concept of "Edge Computing", that is moving some of the intelligence, especially machine learning, towards the edge of the network. Enabling machine learning algorithms to run on resource-constrained hardware, typically on low-power smart devices, is challenging in terms of hardware (optimized and energy-efficient integrated circuits), algorithmic and firmware implementations. This paper presents FANN-on-MCU, an open-source toolkit built upon the Fast Artificial Neural Network (FANN) library to run lightweight and energy-efficient neural networks on microcontrollers based on both the ARM Cortex-M series and the novel RISC-V-based Parallel Ultra-Low-Power (PULP) platform. The toolkit takes multi-layer perceptrons trained with FANN and generates code targeted at execution on low-power microcontrollers either with a floating-point unit (i.e., ARM Cortex-M4F and M7F) or without (i.e., ARM Cortex M0-M3 or PULP-based processors). This paper also provides an architectural performance evaluation of neural networks on the most popular ARM Cortex-M family and the parallel RISC-V processor called Mr. Wolf. The evaluation includes experimental results for three different applications using a self-sustainable wearable multi-sensor bracelet. Experimental results show a measured latency in the order of only a few microseconds and a power consumption of few milliwatts while keeping the memory requirements below the limitations of the targeted microcontrollers. In particular, the parallel implementation on the octa-core RISC-V platform reaches a speedup of 22x and a 69% reduction in energy consumption with respect to a single-core implementation on Cortex-M4 for continuous real-time classification.

cs.LG↗

arXiv2022

Vau da muntanialas: Energy-efficient multi-die scalable acceleration of RNN inference

Recurrent neural networks such as Long Short-Term Memories (LSTMs) learn temporal dependencies by keeping an internal state, making them ideal for time-series problems such as speech recognition. However, the output-to-input feedback creates distinctive memory bandwidth and scalability challenges in designing accelerators for RNNs. We present Muntaniala, an RNN accelerator architecture for LSTM inference with a silicon-measured energy-efficiency of 3.25$TOP/s/W$ and performance of 30.53$GOP/s$ in UMC 65 $nm$ technology. The scalable design of Muntaniala allows running large RNN models by combining multiple tiles in a systolic array. We keep all parameters stationary on every die in the array, drastically reducing the I/O communication to only loading new features and sharing partial results with other dies. For quantifying the overall system power, including I/O power, we built Vau da Muntanialas, to the best of our knowledge, the first demonstration of a systolic multi-chip-on-PCB array of RNN accelerator. Our multi-die prototype performs LSTM inference with 192 hidden states in 330$μs$ with a total system power of 9.0$mW$ at 10$MHz$ consuming 2.95$μJ$. Targeting the 8/16-bit quantization implemented in Muntaniala, we show a phoneme error rate (PER) drop of approximately 3% with respect to floating-point (FP) on a 3L-384NH-123NI LSTM network on the TIMIT dataset.

cs.LG↗

arXiv2022

GVSoC: A Highly Configurable, Fast and Accurate Full-Platform Simulator for RISC-V based IoT Processors

The last few years have seen the emergence of IoT processors: ultra-low power systems-on-chips (SoCs) combining lightweight and flexible micro-controller units (MCUs), often based on open-ISA RISC-V cores, with application-specific accelerators to maximize performance and energy efficiency. Overall, this heterogeneity level requires complex hardware and a full-fledged software stack to orchestrate the execution and exploit platform features. For this reason, enabling agile design space exploration becomes a crucial asset for this new class of low-power SoCs. In this scenario, high-level simulators play an essential role in breaking the speed and design effort bottlenecks of cycle-accurate simulators and FPGA prototypes, respectively, while preserving functional and timing accuracy. We present GVSoC, a highly configurable and timing-accurate event-driven simulator that combines the efficiency of C++ models with the flexibility of Python configuration scripts. GVSoC is fully open-sourced, with the intent to drive future research in the area of highly parallel and heterogeneous RISC-V based IoT processors, leveraging three foundational features: Python-based modular configuration of the hardware description, easy calibration of platform parameters for accurate performance estimation, and high-speed simulation. Experimental results show that GVSoC enables practical functional and performance analysis and design exploration at the full-platform level (processors, memory, peripherals and IOs) with a speed-up of 2500x with respect to cycle-accurate simulation with errors typically below 10% for performance analysis.

eess.SY↗

arXiv2022

HEROv2: Full-Stack Open-Source Research Platform for Heterogeneous Computing

Heterogeneous computers integrate general-purpose host processors with domain-specific accelerators to combine versatility with efficiency and high performance. To realize the full potential of heterogeneous computers, however, many hardware and software design challenges have to be overcome. While architectural and system simulators can be used to analyze heterogeneous computers, they are faced with unavoidable compromises between simulation speed and performance modeling accuracy. In this work we present HEROv2, an FPGA-based research platform that enables accurate and fast exploration of heterogeneous computers consisting of accelerators based on clusters of 32-bit RISC-V cores and an application-class 64-bit ARMv8 or RV64 host processor. HEROv2 allows to seamlessly share data between 64-bit hosts and 32-bit accelerators and comes with a fully open-source on-chip network, a unified heterogeneous programming interface, and a mixed-data-model, mixed-ISA heterogeneous compiler based on LLVM. We evaluate HEROv2 in four case studies from the application level over toolchain and system architecture down to accelerator microarchitecture. We demonstrate how HEROv2 enables effective research and development on the full stack of heterogeneous computing. For instance, the compiler can tile loops and infer data transfers to and from the accelerators, which leads to a speedup of up to 4.4x compared to the original program and in most cases is only 15 % slower than a handwritten implementation, which requires 2.6x more code.

cs.DC↗

arXiv2022

Sub-mW Keyword Spotting on an MCU: Analog Binary Feature Extraction and Binary Neural Networks

Keyword spotting (KWS) is a crucial function enabling the interaction with the many ubiquitous smart devices in our surroundings, either activating them through wake-word or directly as a human-computer interface. For many applications, KWS is the entry point for our interactions with the device and, thus, an always-on workload. Many smart devices are mobile and their battery lifetime is heavily impacted by continuously running services. KWS and similar always-on services are thus the focus when optimizing the overall power consumption. This work addresses KWS energy-efficiency on low-cost microcontroller units (MCUs). We combine analog binary feature extraction with binary neural networks. By replacing the digital preprocessing with the proposed analog front-end, we show that the energy required for data acquisition and preprocessing can be reduced by 29x, cutting its share from a dominating 85% to a mere 16% of the overall energy consumption for our reference KWS application. Experimental evaluations on the Speech Commands Dataset show that the proposed system outperforms state-of-the-art accuracy and energy efficiency, respectively, by 1% and 4.3x on a 10-class dataset while providing a compelling accuracy-energy trade-off including a 2% accuracy drop for a 71x energy reduction.

cs.SD↗

arXiv2022

A Heterogeneous In-Memory Computing Cluster For Flexible End-to-End Inference of Real-World Deep Neural Networks

Deployment of modern TinyML tasks on small battery-constrained IoT devices requires high computational energy efficiency. Analog In-Memory Computing (IMC) using non-volatile memory (NVM) promises major efficiency improvements in deep neural network (DNN) inference and serves as on-chip memory storage for DNN weights. However, IMC's functional flexibility limitations and their impact on performance, energy, and area efficiency are not yet fully understood at the system level. To target practical end-to-end IoT applications, IMC arrays must be enclosed in heterogeneous programmable systems, introducing new system-level challenges which we aim at addressing in this work. We present a heterogeneous tightly-coupled clustered architecture integrating 8 RISC-V cores, an in-memory computing accelerator (IMA), and digital accelerators. We benchmark the system on a highly heterogeneous workload such as the Bottleneck layer from a MobileNetV2, showing 11.5x performance and 9.5x energy efficiency improvements, compared to highly optimized parallel execution on the cores. Furthermore, we explore the requirements for end-to-end inference of a full mobile-grade DNN (MobileNetV2) in terms of IMC array resources, by scaling up our heterogeneous architecture to a multi-array accelerator. Our results show that our solution, on the end-to-end inference of the MobileNetV2, is one order of magnitude better in terms of execution latency than existing programmable architectures and two orders of magnitude better than state-of-the-art heterogeneous solutions integrating in-memory computing analog cores.

cs.AR↗

arXiv2021

Sub-100uW Multispectral Riemannian Classification for EEG-based Brain--Machine Interfaces

Motor imagery brain--machine interfaces enable us to control machines by merely thinking of performing a motor action. Practical use cases require a wearable solution where the classification of the brain signals is done locally near the sensor using machine learning models embedded on energy-efficient microcontroller units, for assured privacy, user comfort, and long-term usage. In this work, we provide practical insights on the accuracy-cost trade-off for embedded BMI solutions. Our multispectral Riemannian classifier reaches 75.1% accuracy on a 4-class MI task. The accuracy is further improved by tuning different types of classifiers to each subject, achieving 76.4%. We further scale down the model by quantizing it to mixed-precision representations with a minimal accuracy loss of 1% and 1.4%, respectively, which is still up to 4.1% more accurate than the state-of-the-art embedded convolutional neural network. We implement the model on a low-power MCU within an energy budget of merely 198uJ and taking only 16.9ms per classification. Classifying samples continuously, overlapping the 3.5s samples by 50% to avoid missing user inputs allows for operation at just 85uW. Compared to related works in embedded MI-BMIs, our solution sets the new state-of-the-art in terms of accuracy-energy trade-off for near-sensor classification.

eess.SP↗

arXiv2021

MemPool-3D: Boosting Performance and Efficiency of Shared-L1 Memory Many-Core Clusters with 3D Integration

Three-dimensional integrated circuits promise power, performance, and footprint gains compared to their 2D counterparts, thanks to drastic reductions in the interconnects' length through their smaller form factor. We can leverage the potential of 3D integration by enhancing MemPool, an open-source many-core design with 256 cores and a shared pool of L1 scratchpad memory connected with a low-latency interconnect. MemPool's baseline 2D design is severely limited by routing congestion and wire propagation delay, making the design ideal for 3D integration. In architectural terms, we increase MemPool's scratchpad memory capacity beyond the sweet spot for 2D designs, improving performance in a common digital signal processing kernel. We propose a 3D MemPool design that leverages a smart partitioning of the memory resources across two layers to balance the size and utilization of the stacked dies. In this paper, we explore the architectural and the technology parameter spaces by analyzing the power, performance, area, and energy efficiency of MemPool instances in 2D and 3D with 1 MiB, 2 MiB, 4 MiB, and 8 MiB of scratchpad memory in a commercial 28 nm technology node. We observe a performance gain of 9.1% when running a matrix multiplication on the MemPool-3D design with 4 MiB of scratchpad memory compared to the MemPool 2D counterpart. In terms of energy efficiency, we can implement the MemPool-3D instance with 4 MiB of L1 memory on an energy budget 15% smaller than its 2D counterpart, and even 3.7% smaller than the MemPool-2D instance with one-fourth of the L1 scratchpad memory capacity.

cs.AR↗

arXiv2021

An Open-Source Platform for High-Performance Non-Coherent On-Chip Communication

On-chip communication infrastructure is a central component of modern systems-on-chip (SoCs), and it continues to gain importance as the number of cores, the heterogeneity of components, and the on-chip and off-chip bandwidth continue to grow. Decades of research on on-chip networks enabled cache-coherent shared-memory multiprocessors. However, communication fabrics that meet the needs of heterogeneous many-cores and accelerator-rich SoCs, which are not, or only partially, coherent, are a much less mature research area. In this work, we present a modular, topology-agnostic, high-performance on-chip communication platform. The platform includes components to build and link subnetworks with customizable bandwidth and concurrency properties and adheres to a state-of-the-art, industry-standard protocol. We discuss microarchitectural trade-offs and timing/area characteristics of our modules and show that they can be composed to build high-bandwidth (e.g., 2.5 GHz and 1024 bit data width) end-to-end on-chip communication fabrics (not only network switches but also DMA engines and memory controllers) with high degrees of concurrency. We design and implement a state-of-the-art ML training accelerator, where our communication fabric scales to 1024 cores on a die, providing 32 TB/s cross-sectional bandwidth at only 24 ns round-trip latency between any two cores.

cs.AR↗

arXiv2021

A TinyML Platform for On-Device Continual Learning with Quantized Latent Replays

In the last few years, research and development on Deep Learning models and techniques for ultra-low-power devices in a word, TinyML has mainly focused on a train-then-deploy assumption, with static models that cannot be adapted to newly collected data without cloud-based data collection and fine-tuning. Latent Replay-based Continual Learning (CL) techniques[1] enable online, serverless adaptation in principle, but so farthey have still been too computation and memory-hungry for ultra-low-power TinyML devices, which are typically based on microcontrollers. In this work, we introduce a HW/SW platform for end-to-end CL based on a 10-core FP32-enabled parallel ultra-low-power (PULP) processor. We rethink the baseline Latent Replay CL algorithm, leveraging quantization of the frozen stage of the model and Latent Replays (LRs) to reduce their memory cost with minimal impact on accuracy. In particular, 8-bit compression of the LR memory proves to be almost lossless (-0.26% with 3000LR) compared to the full-precision baseline implementation, but requires 4x less memory, while 7-bit can also be used with an additional minimal accuracy degradation (up to 5%). We also introduce optimized primitives for forward and backward propagation on the PULP processor. Our results show that by combining these techniques, continual learning can be achieved in practice using less than 64MB of memory an amount compatible with embedding in TinyML devices. On an advanced 22nm prototype of our platform, called VEGA, the proposed solution performs onaverage 65x faster than a low-power STM32 L4 microcontroller, being 37x more energy efficient enough for a lifetime of 535h when learning a new mini-batch of data once every minute.

cs.LG↗

arXiv2021

Vega: A 10-Core SoC for IoT End-Nodes with DNN Acceleration and Cognitive Wake-Up From MRAM-Based State-Retentive Sleep Mode

The Internet-of-Things requires end-nodes with ultra-low-power always-on capability for a long battery lifetime, as well as high performance, energy efficiency, and extreme flexibility to deal with complex and fast-evolving near-sensor analytics algorithms (NSAAs). We present Vega, an IoT end-node SoC capable of scaling from a 1.7 $\mathrmμ$W fully retentive cognitive sleep mode up to 32.2 GOPS (@ 49.4 mW) peak performance on NSAAs, including mobile DNN inference, exploiting 1.6 MB of state-retentive SRAM, and 4 MB of non-volatile MRAM. To meet the performance and flexibility requirements of NSAAs, the SoC features 10 RISC-V cores: one core for SoC and IO management and a 9-cores cluster supporting multi-precision SIMD integer and floating-point computation. Vega achieves SoA-leading efficiency of 615 GOPS/W on 8-bit INT computation (boosted to 1.3TOPS/W for 8-bit DNN inference with hardware acceleration). On floating-point (FP) compuation, it achieves SoA-leading efficiency of 79 and 129 GFLOPS/W on 32- and 16-bit FP, respectively. Two programmable machine-learning (ML) accelerators boost energy efficiency in cognitive sleep and active states, respectively.

cs.AR↗

arXiv2021

A Fully-Integrated 5mW, 0.8Gbps Energy-Efficient Chip-to-Chip Data Link for Ultra-Low-Power IoT End-Nodes in 65-nm CMOS

The increasing complexity of Internet-of-Things (IoT) applications and near-sensor processing algorithms is pushing the computational power of low-power, battery-operated end-node systems. This trend also reveals growing demands for high-speed and energy-efficient inter-chip communications to manage the increasing amount of data coming from off-chip sensors and memories. While traditional micro-controller interfaces such as SPIs cannot cope with tight energy and large bandwidth requirements, low-voltage swing transceivers can tackle this challenge thanks to their capability to achieve several Gbps of the communication speed at milliwatt power levels. However, recent research on high-speed serial links focused on high-performance systems, with a power consumption significantly larger than the one of low-power IoT end-nodes, or on stand-alone designs not integrated at a system level. This paper presents a low-swing transceiver for the energy-efficient and low power chip-to-chip communication fully integrated within an IoT end-node System-on-Chip, fabricated in CMOS 65nm technology. The transceiver can be easily controlled via a software interface; thus, we can consider realistic scenarios for the data communication, which cannot be assessed in stand-alone prototypes. Chip measurements show that the transceiver achieves 8.46x higher energy efficiency at 15.9x higher performance than a traditional microcontroller interface such as a single-SPI.

eess.SP↗

arXiv2021

End-to-end 100-TOPS/W Inference With Analog In-Memory Computing: Are We There Yet?

In-Memory Acceleration (IMA) promises major efficiency improvements in deep neural network (DNN) inference, but challenges remain in the integration of IMA within a digital system. We propose a heterogeneous architecture coupling 8 RISC-V cores with an IMA in a shared-memory cluster, analyzing the benefits and trade-offs of in-memory computing on the realistic use case of a MobileNetV2 bottleneck layer. We explore several IMA integration strategies, analyzing performance, area, and energy efficiency. We show that while pointwise layers achieve significant speed-ups over software implementation, on depthwise layer the inability to efficiently map parameters on the accelerator leads to a significant trade-off between throughput and area. We propose a hybrid solution where pointwise convolutions are executed on IMA while depthwise on the cluster cores, achieving a speed-up of 3x over SW execution while saving 50% of area when compared to an all-in IMA solution with similar performance.

cs.AR↗

arXiv2021

Memory-Aware Partitioning of Machine Learning Applications for Optimal Energy Use in Batteryless Systems

Sensing systems powered by energy harvesting have traditionally been designed to tolerate long periods without energy. As the Internet of Things (IoT) evolves towards a more transient and opportunistic execution paradigm, reducing energy storage costs will be key for its economic and ecologic viability. However, decreasing energy storage in harvesting systems introduces reliability issues. Transducers only produce intermittent energy at low voltage and current levels, making guaranteed task completion a challenge. Existing ad hoc methods overcome this by buffering enough energy either for single tasks, incurring large data-retention overheads, or for one full application cycle, requiring a large energy buffer. We present Julienning: an automated method for optimizing the total energy cost of batteryless applications. Using a custom specification model, developers can describe transient applications as a set of atomically executed kernels with explicit data dependencies. Our optimization flow can partition data- and energy-intensive applications into multiple execution cycles with bounded energy consumption. By leveraging interkernel data dependencies, these energy-bounded execution cycles minimize the number of system activations and nonvolatile data transfers, and thus the total energy overhead. We validate our methodology with two batteryless cameras running energy-intensive machine learning applications. Results demonstrate that compared to ad hoc solutions, our method can reduce the required energy storage by over 94% while only incurring a 0.12% energy overhead.

cs.DC↗

arXiv2021

SmartHand: Towards Embedded Smart Hands for Prosthetic and Robotic Applications

The sophisticated sense of touch of the human hand significantly contributes to our ability to safely, efficiently, and dexterously manipulate arbitrary objects in our environment. Robotic and prosthetic devices lack refined, tactile feedback from their end-effectors, leading to counterintuitive and complex control strategies. To address this lack, tactile sensors have been designed and developed, but they often offer an insufficient spatial and temporal resolution. This paper focuses on overcoming these issues by designing a smart embedded system, called SmartHand, enabling the acquisition and real-time processing of high-resolution tactile information from a hand-shaped multi-sensor array for prosthetic and robotic applications. We acquire a new tactile dataset consisting of 340,000 frames while interacting with 16 everyday objects and the empty hand, i.e., a total of 17 classes. The design of the embedded system minimizes response latency in classification, by deploying a small yet accurate convolutional neural network on a high-performance ARM Cortex-M7 microcontroller. Compared to related work, our model requires one order of magnitude less memory and 15.6x fewer computations while achieving similar inter-session accuracy and up to 98.86% and 99.83% top-1 and top-3 cross-validation accuracy, respectively. Experimental results show a total power consumption of 505mW and a latency of only 100ms.

cs.RO↗

arXiv2021

A Construction Kit for Efficient Low Power Neural Network Accelerator Designs

Implementing embedded neural network processing at the edge requires efficient hardware acceleration that couples high computational performance with low power consumption. Driven by the rapid evolution of network architectures and their algorithmic features, accelerator designs are constantly updated and improved. To evaluate and compare hardware design choices, designers can refer to a myriad of accelerator implementations in the literature. Surveys provide an overview of these works but are often limited to system-level and benchmark-specific performance metrics, making it difficult to quantitatively compare the individual effect of each utilized optimization technique. This complicates the evaluation of optimizations for new accelerator designs, slowing-down the research progress. This work provides a survey of neural network accelerator optimization approaches that have been used in recent works and reports their individual effects on edge processing performance. It presents the list of optimizations and their quantitative effects as a construction kit, allowing to assess the design choices for each building block separately. Reported optimizations range from up to 10'000x memory savings to 33x energy reductions, providing chip designers an overview of design choices for implementing efficient low power neural network accelerators.

cs.AR↗

arXiv2021

NN2CAM: Automated Neural Network Mapping for Multi-Precision Edge Processing on FPGA-Based Cameras

The record-breaking achievements of deep neural networks (DNNs) in image classification and detection tasks resulted in a surge of new computer vision applications during the past years. However, their computational complexity is restricting their deployment to powerful stationary or complex dedicated processing hardware, limiting their use in smart edge processing applications. We propose an automated deployment framework for DNN acceleration at the edge on field-programmable gate array (FPGA)-based cameras. The framework automatically converts an arbitrary-sized and quantized trained network into an efficient streaming-processing IP block that is instantiated within a generic adapter block in the FPGA. In contrast to prior work, the accelerator is purely logic and thus supports end-to-end processing on FPGAs without on-chip microprocessors. Our mapping tool features automatic translation from a trained Caffe network, arbitrary layer-wise fixed-point precision for both weights and activations, an efficient XNOR implementation for fully binary layers as well as a balancing mechanism for effective allocation of computational resources in the streaming dataflow. To present the performance of the system we employ this tool to implement two CNN edge processing networks on an FPGA-based high-speed camera with various precision settings showing computational throughputs of up to 337GOPS in low-latency streaming mode (no batching), running entirely on the camera.

eess.IV↗

arXiv2021

Energy Efficient In-memory Hyperdimensional Encoding for Spatio-temporal Signal Processing

The emerging brain-inspired computing paradigm known as hyperdimensional computing (HDC) has been proven to provide a lightweight learning framework for various cognitive tasks compared to the widely used deep learning-based approaches. Spatio-temporal (ST) signal processing, which encompasses biosignals such as electromyography (EMG) and electroencephalography (EEG), is one family of applications that could benefit from an HDC-based learning framework. At the core of HDC lie manipulations and comparisons of large bit patterns, which are inherently ill-suited to conventional computing platforms based on the von-Neumann architecture. In this work, we propose an architecture for ST signal processing within the HDC framework using predominantly in-memory compute arrays. In particular, we introduce a methodology for the in-memory hyperdimensional encoding of ST data to be used together with an in-memory associative search module. We show that the in-memory HDC encoder for ST signals offers at least 1.80x energy efficiency gains, 3.36x area gains, as well as 9.74x throughput gains compared with a dedicated digital hardware implementation. At the same time it achieves a peak classification accuracy within 0.04% of that of the baseline HDC framework.

cs.ET↗