arXiv subjects

Luca Benini

Publications and source records attributed to Luca Benini.

At least 379 records · Page 21Linked to original sources

arXiv2020

MemPool: A Shared-L1 Memory Many-Core Cluster with a Low-Latency Interconnect

A key challenge in scaling shared-L1 multi-core clusters towards many-core (more than 16 cores) configurations is to ensure low-latency and efficient access to the L1 memory. In this work we demonstrate that it is possible to scale up the shared-L1 architecture: We present MemPool, a 32 bit many-core system with 256 fast RV32IMA "Snitch" cores featuring application-tunable execution units, running at 700 MHz in typical conditions (TT/0.80 V/25°C). MemPool is easy to program, with all the cores sharing a global view of a large L1 scratchpad memory pool, accessible within at most 5 cycles. In MemPool's physical-aware design, we emphasized the exploration, design, and optimization of the low-latency processor-to-L1-memory interconnect. We compare three candidate topologies, analyzing them in terms of latency, throughput, and back-end feasibility. The chosen topology keeps the average latency at fewer than 6 cycles, even for a heavy injected load of 0.33 request/core/cycle. We also propose a lightweight addressing scheme that maps each core private data to a memory bank accessible within one cycle, which leads to performance gains of up to 20% in real-world signal processing benchmarks. The addressing scheme is also highly efficient in terms of energy consumption since requests to local banks consume only half of the energy required to access remote banks. Our design achieves competitive performance with respect to an ideal, non-implementable full-crossbar baseline.

cs.AR↗

arXiv2020

XpulpNN: Enabling Energy Efficient and Flexible Inference of Quantized Neural Network on RISC-V based IoT End Nodes

This work introduces lightweight extensions to the RISC-V ISA to boost the efficiency of heavily Quantized Neural Network (QNN) inference on microcontroller-class cores. By extending the ISA with nibble (4-bit) and crumb (2-bit) SIMD instructions, we are able to show near-linear speedup with respect to higher precision integer computation on the key kernels for QNN computation. Also, we propose a custom execution paradigm for SIMD sum-of-dot-product operations, which consists of fusing a dot product with a load operation, with an up to 1.64x peak MAC/cycle improvement compared to a standard execution scenario. To further push the efficiency, we integrate the RISC-V extended core in a parallel cluster of 8 processors, with near-linear improvement with respect to a single core architecture. To evaluate the proposed extensions, we fully implement the cluster of processors in GF22FDX technology. QNN convolution kernels on a parallel cluster implementing the proposed extension run 6 x and 8 x faster when considering 4- and 2-bit data operands, respectively, compared to a baseline processing cluster only supporting 8-bit SIMD instructions. With a peak of 2.22 TOPs/s/W, the proposed solution achieves efficiency levels comparable with dedicated DNN inference accelerators, and up to three orders of magnitude better than state-of-the-art ARM Cortex-M based microcontroller systems such as the low-end STM32L4 MCU and the high-end STM32H7 MCU.

cs.AR↗

arXiv2020

Manticore: A 4096-core RISC-V Chiplet Architecture for Ultra-efficient Floating-point Computing

Data-parallel problems demand ever growing floating-point (FP) operations per second under tight area- and energy-efficiency constraints. In this work, we present Manticore, a general-purpose, ultra-efficient chiplet-based architecture for data-parallel FP workloads. We have manufactured a prototype of the chiplet's computational core in Globalfoundries 22FDX process and demonstrate more than 5x improvement in energy efficiency on FP intensive workloads compared to CPUs and GPUs. The compute capability at high energy and area efficiency is provided by Snitch clusters containing eight small integer cores, each controlling a large FPU. The core supports two custom ISA extensions: The SSR extension elides explicit load and store instructions by encoding them as register reads and writes. The FREP extension decouples the integer core from the FPU allowing floating-point instructions to be issued independently. These two extensions allow the single-issue core to minimize its instruction fetch bandwidth and saturate the instruction bandwidth of the FPU, achieving FPU utilization above 90%, with more than 40% of core area dedicated to the FPU.

cs.AR↗

arXiv2020

Binarization Methods for Motor-Imagery Brain-Computer Interface Classification

Successful motor-imagery brain-computer interface (MI-BCI) algorithms either extract a large number of handcrafted features and train a classifier, or combine feature extraction and classification within deep convolutional neural networks (CNNs). Both approaches typically result in a set of real-valued weights, that pose challenges when targeting real-time execution on tightly resource-constrained devices. We propose methods for each of these approaches that allow transforming real-valued weights to binary numbers for efficient inference. Our first method, based on sparse bipolar random projection, projects a large number of real-valued Riemannian covariance features to a binary space, where a linear SVM classifier can be learned with binary weights too. By tuning the dimension of the binary embedding, we achieve almost the same accuracy in 4-class MI ($\leq$1.27% lower) compared to models with float16 weights, yet delivering a more compact model with simpler operations to execute. Second, we propose to use memory-augmented neural networks (MANNs) for MI-BCI such that the augmented memory is binarized. Our method replaces the fully connected layer of CNNs with a binary augmented memory using bipolar random projection, or learned projection. Our experimental results on EEGNet, an already compact CNN for MI-BCI, show that it can be compressed by 1.28x at iso-accuracy using the random projection. On the other hand, using the learned projection provides 3.89% higher accuracy but increases the memory size by 28.10x.

eess.SP↗

arXiv2020

An Energy-Efficient Low-Voltage Swing Transceiver for mW-Range IoT End-Nodes

As the Internet-of-Things (IoT) applications become more and more pervasive, IoT end nodes are requiring more and more computational power within a few mW of power envelope, coupled with high-speed and energy-efficient inter-chip communication to deal with the growing input/output and memory bandwidth for emerging near-sensor analytics applications. While traditional interfaces such as SPI cannot cope with these tight requirements, low-voltage swing transceivers can tackle this challenge thanks to their capability to achieve several Gbps of bandwidth at extremely low power. However, recent research on high-speed serial links addressed this challenge only partially, proposing only partial or stand-alone designs, and not addressing their integration in real systems and the related implications. In this paper, we present for the first time a complete design and system-level architecture of a low-voltage swing transceiver integrated within a low-power (mW range) IoT end-node processors, and we compare it with existing microcontroller interfaces. The transceiver, implemented in a commercial 65-nm CMOS technology achieves 10.2x higher energy efficiency at 15.7x higher performance than traditional microcontroller peripherals (single lane).

cs.AR↗

arXiv2020

A Mixed-Precision RISC-V Processor for Extreme-Edge DNN Inference

Low bit-width Quantized Neural Networks (QNNs) enable deployment of complex machine learning models on constrained devices such as microcontrollers (MCUs) by reducing their memory footprint. Fine-grained asymmetric quantization (i.e., different bit-widths assigned to weights and activations on a tensor-by-tensor basis) is a particularly interesting scheme to maximize accuracy under a tight memory constraint. However, the lack of sub-byte instruction set architecture (ISA) support in SoA microprocessors makes it hard to fully exploit this extreme quantization paradigm in embedded MCUs. Support for sub-byte and asymmetric QNNs would require many precision formats and an exorbitant amount of opcode space. In this work, we attack this problem with status-based SIMD instructions: rather than encoding precision explicitly, each operand's precision is set dynamically in a core status register. We propose a novel RISC-V ISA core MPIC (Mixed Precision Inference Core) based on the open-source RI5CY core. Our approach enables full support for mixed-precision QNN inference with different combinations of operands at 16-, 8-, 4- and 2-bit precision, without adding any extra opcode or increasing the complexity of the decode stage. Our results show that MPIC improves both performance and energy efficiency by a factor of 1.1-4.9x when compared to software-based mixed-precision on RI5CY; with respect to commercially available Cortex-M4 and M7 microcontrollers, it delivers 3.6-11.7x better performance and 41-155x higher efficiency.

cs.AR↗

arXiv2020

Snitch: A tiny Pseudo Dual-Issue Processor for Area and Energy Efficient Execution of Floating-Point Intensive Workloads

Data-parallel applications, such as data analytics, machine learning, and scientific computing, are placing an ever-growing demand on floating-point operations per second on emerging systems. With increasing integration density, the quest for energy efficiency becomes the number one design concern. While dedicated accelerators provide high energy efficiency, they are over-specialized and hard to adjust to algorithmic changes. We propose an architectural concept that tackles the issues of achieving extreme energy efficiency while still maintaining high flexibility as a general-purpose compute engine. The key idea is to pair a tiny 10kGE control core, called Snitch, with a double-precision FPU to adjust the compute to control ratio. While traditionally minimizing non-FPU area and achieving high floating-point utilization has been a trade-off, with Snitch, we achieve them both, by enhancing the ISA with two minimally intrusive extensions: stream semantic registers (SSR) and a floating-point repetition instruction (FREP). SSRs allow the core to implicitly encode load/store instructions as register reads/writes, eliding many explicit memory instructions. The FREP extension decouples the floating-point and integer pipeline by sequencing instructions from a micro-loop buffer. These ISA extensions significantly reduce the pressure on the core and free it up for other tasks, making Snitch and FPU effectively dual-issue at a minimal incremental cost of 3.2%. The two low overhead ISA extensions make Snitch more flexible than a contemporary vector processor lane, achieving a $2\times$ energy-efficiency improvement. We have evaluated the proposed core and ISA extensions on an octa-core cluster in 22nm technology. We achieve more than $5\times$ multi-core speed-up and a $3.5\times$ gain in energy efficiency on several parallel microkernels.

cs.AR↗

arXiv2020

A transprecision floating-point cluster for efficient near-sensor data analytics

Recent applications in the domain of near-sensor computing require the adoption of floating-point arithmetic to reconcile high precision results with a wide dynamic range. In this paper, we propose a multi-core computing cluster that leverages the fined-grained tunable principles of transprecision computing to provide support to near-sensor applications at a minimum power budget. Our design - based on the open-source RISC-V architecture - combines parallelization and sub-word vectorization with near-threshold operation, leading to a highly scalable and versatile system. We perform an exhaustive exploration of the design space of the transprecision cluster on a cycle-accurate FPGA emulator, with the aim to identify the most efficient configurations in terms of performance, energy efficiency, and area efficiency. We also provide a full-fledged software stack support, including a parallel runtime and a compilation toolchain, to enable the development of end-to-end applications. We perform an experimental assessment of our design on a set of benchmarks representative of the near-sensor processing domain, complementing the timing results with a post place-&-route analysis of the power consumption. Finally, a comparison with the state-of-the-art shows that our solution outperforms the competitors in energy efficiency, reaching a peak of 97 Gflop/s/W on single-precision scalars and 162 Gflop/s/W on half-precision vectors.

cs.DC↗

arXiv2020

Leveraging Automated Mixed-Low-Precision Quantization for tiny edge microcontrollers

The severe on-chip memory limitations are currently preventing the deployment of the most accurate Deep Neural Network (DNN) models on tiny MicroController Units (MCUs), even if leveraging an effective 8-bit quantization scheme. To tackle this issue, in this paper we present an automated mixed-precision quantization flow based on the HAQ framework but tailored for the memory and computational characteristics of MCU devices. Specifically, a Reinforcement Learning agent searches for the best uniform quantization levels, among 2, 4, 8 bits, of individual weight and activation tensors, under the tight constraints on RAM and FLASH embedded memory sizes. We conduct an experimental analysis on MobileNetV1, MobileNetV2 and MNasNet models for Imagenet classification. Concerning the quantization policy search, the RL agent selects quantization policies that maximize the memory utilization. Given an MCU-class memory bound of 2MB for weight-only quantization, the compressed models produced by the mixed-precision engine result as accurate as the state-of-the-art solutions quantized with a non-uniform function, which is not tailored for CPUs featuring integer-only arithmetic. This denotes the viability of uniform quantization, required for MCU deployments, for deep weights compression. When also limiting the activation memory budget to 512kB, the best MobileNetV1 model scores up to 68.4% on Imagenet thanks to the found quantization policy, resulting to be 4% more accurate than the other 8-bit networks fitting the same memory constraints.

cs.LG↗

arXiv2020

Performance-Aware Predictive-Model-Based On-Chip Body-Bias Regulation Strategy for an ULP Multi-Core Cluster in 28nm UTBB FD-SOI

The performance and reliability of Ultra-Low-Power (ULP) computing platforms are adversely affected by environmental temperature and process variations. Mitigating the effect of these phenomena becomes crucial when these devices operate near-threshold, due to the magnification of process variations and to the strong temperature inversion effect that affects advanced technology nodes in low-voltage corners, which causes huge overhead due to margining for timing closure. Supporting an extended range of reverse and forward body-bias, UTBB FD-SOI technology provides a powerful knob to compensate for such variations. In this work we propose a methodology to maximize energy efficiency at run-time exploiting body biasing on a ULP platform operating near-threshold. The proposed method relies on on-line performance measurements by means of Process Monitoring Blocks (PMBs) coupled with an on-chip low-power body bias generator. We correlate the measurement performed by the PMBs to the maximum achievable frequency of the system, deriving a predictive model able to estimate it with an error of 9.7% at 0.7V. To minimize the effect of process variations we propose a calibration procedure that allows to use a PMB model affected by only the temperature-induced error, which reduces the frequency estimation error by 2.4x (from 9.7% to 4%). We finally propose a controller architecture relying on the derived models to automatically regulate at run-time the body bias voltage. We demonstrate that adjusting the body bias voltage against environmental temperature variations leads up to 2X reduction in the leakage power and a 15% improvement on the global energy consumption when the system operates at 0.7V and 170MHz

cs.AR↗

arXiv2020

Memory-Latency-Accuracy Trade-offs for Continual Learning on a RISC-V Extreme-Edge Node

AI-powered edge devices currently lack the ability to adapt their embedded inference models to the ever-changing environment. To tackle this issue, Continual Learning (CL) strategies aim at incrementally improving the decision capabilities based on newly acquired data. In this work, after quantifying memory and computational requirements of CL algorithms, we define a novel HW/SW extreme-edge platform featuring a low power RISC-V octa-core cluster tailored for on-demand incremental learning over locally sensed data. The presented multi-core HW/SW architecture achieves a peak performance of 2.21 and 1.70 MAC/cycle, respectively, when running forward and backward steps of the gradient descent. We report the trade-off between memory footprint, latency, and accuracy for learning a new class with Latent Replay CL when targeting an image classification task on the CORe50 dataset. For a CL setting that retrains all the layers, taking 5h to learn a new class and achieving up to 77.3% of precision, a more efficient solution retrains only part of the network, reaching an accuracy of 72.5% with a memory requirement of 300 MB and a computation latency of 1.5 hours. On the other side, retraining only the last layer results in the fastest (867 ms) and less memory hungry (20 MB) solution but scoring 58% on the CORe50 dataset. Thanks to the parallelism of the low-power cluster engine, our HW/SW platform results 25x faster than typical MCU device, on which CL is still impractical, and demonstrates an 11x gain in terms of energy consumption with respect to mobile-class solutions.

cs.DC↗

arXiv2020

Always-On 674uW @ 4GOP/s Error Resilient Binary Neural Networks with Aggressive SRAM Voltage Scaling on a 22nm IoT End-Node

Binary Neural Networks (BNNs) have been shown to be robust to random bit-level noise, making aggressive voltage scaling attractive as a power-saving technique for both logic and SRAMs. In this work, we introduce the first fully programmable IoT end-node system-on-chip (SoC) capable of executing software-defined, hardware-accelerated BNNs at ultra-low voltage. Our SoC exploits a hybrid memory scheme where error-vulnerable SRAMs are complemented by reliable standard-cell memories to safely store critical data under aggressive voltage scaling. On a prototype in 22nm FDX technology, we demonstrate that both the logic and SRAM voltage can be dropped to 0.5Vwithout any accuracy penalty on a BNN trained for the CIFAR-10 dataset, improving energy efficiency by 2.2X w.r.t. nominal conditions. Furthermore, we show that the supply voltage can be dropped to 0.42V (50% of nominal) while keeping more than99% of the nominal accuracy (with a bit error rate ~1/1000). In this operating point, our prototype performs 4Gop/s (15.4Inference/s on the CIFAR-10 dataset) by computing up to 13binary ops per pJ, achieving 22.8 Inference/s/mW while keeping within a peak power envelope of 674uW - low enough to enable always-on operation in ultra-low power smart cameras, long-lifetime environmental sensors, and insect-sized pico-drones.

cs.AR↗

arXiv2020

A 0.5GHz 0.35mW LDO-Powered Constant-Slope Phase Interpolator with 0.22$\%$ INL

Clock generators are an essential and critical building block of any communication link, whether it be wired or wireless, and they are increasingly critical given the push for lower I/O power and higher bandwidth in Systems-on-Chip (SoCs) for the Internet-of-Things (IoT). One recurrent issue with clock generators is multiple-phase generation, especially for low-power applications; several methods of phase generation have been proposed, one of which is phase interpolation. We propose a phase interpolator (PI) that employs the concept of constant-slope operation. Consequently, a low-power highly-linear operation is coupled with the wide dynamic range (i.e. phase wrapping) capabilities of a PI. Furthermore, the PI is powered by a low-dropout regulator (LDO) supporting fast transient operation. Implemented in 65-nm CMOS technology, it consumes 350$μ$W at a 1.2-V supply and a 0.5-GHz clock; it achieves energy efficiency 4$\times$-15$\times$ lower than state-of-the-art (SoA) digital-to-time converters (DTCs) and an integral non-linearity (INL) of 2.5$\times$-3.1$\times$ better than SoA PIs, striking a good balance between linearity and energy efficiency.

eess.SP↗

arXiv2020

FPnew: An Open-Source Multi-Format Floating-Point Unit Architecture for Energy-Proportional Transprecision Computing

The slowdown of Moore's law and the power wall necessitates a shift towards finely tunable precision (a.k.a. transprecision) computing to reduce energy footprint. Hence, we need circuits capable of performing floating-point operations on a wide range of precisions with high energy-proportionality. We present FPnew, a highly configurable open-source transprecision floating-point unit (TP-FPU) capable of supporting a wide range of standard and custom FP formats. To demonstrate the flexibility and efficiency of FPnew in general-purpose processor architectures, we extend the RISC-V ISA with operations on half-precision, bfloat16, and an 8bit FP format, as well as SIMD vectors and multi-format operations. Integrated into a 32-bit RISC-V core, our TP-FPU can speed up execution of mixed-precision applications by 1.67x w.r.t. an FP32 baseline, while maintaining end-to-end precision and reducing system energy by 37%. We also integrate FPnew into a 64-bit RISC-V core, supporting five FP formats on scalars or 2, 4, or 8-way SIMD vectors. For this core, we measured the silicon manufactured in Globalfoundries 22FDX technology across a wide voltage range from 0.45V to 1.2V. The unit achieves leading-edge measured energy efficiencies between 178 Gflop/sW (on FP64) and 2.95 Tflop/sW (on 8-bit mini-floats), and a performance between 3.2 Gflop/s and 25.3 Gflop/s.

cs.AR↗

arXiv2020

Arnold: an eFPGA-Augmented RISC-V SoC for Flexible and Low-Power IoT End-Nodes

A wide range of Internet of Things (IoT) applications require powerful, energy-efficient and flexible end-nodes to acquire data from multiple sources, process and distill the sensed data through near-sensor data analytics algorithms, and transmit it wirelessly. This work presents Arnold: a 0.5 V to 0.8 V, 46.83 uW/MHz, 600 MOPS fully programmable RISC-V Microcontroller unit (MCU) fabricated in 22 nm Globalfoundries GF22FDX (GF22FDX) technology, coupled with a stateof-the-art (SoA) microcontroller to an embedded Field Programmable Gate Array (FPGA). We demonstrate the flexibility of the System-OnChip (SoC) to tackle the challenges of many emerging IoT applications, such as (i) interfacing sensors and accelerators with non-standard interfaces, (ii) performing on-the-fly pre-processing tasks on data streamed from peripherals, and (iii) accelerating near-sensor analytics, encryption, and machine learning tasks. A unique feature of the proposed SoC is the exploitation of body-biasing to reduce leakage power of the embedded FPGA (eFPGA) fabric by up to 18x at 0.5 V, achieving SoA state bitstream-retentive sleep power for the eFPGA fabric, as low as 20.5 uW. The proposed SoC provides 3.4x better performance and 2.9x better energy efficiency than other fabricated heterogeneous re-configurable SoCs of the same class.

cs.AR↗

arXiv2020

Bonseyes AI Pipeline -- bringing AI to you. End-to-end integration of data, algorithms and deployment tools

Next generation of embedded Information and Communication Technology (ICT) systems are collaborative systems able to perform autonomous tasks. The remarkable expansion of the embedded ICT market, together with the rise and breakthroughs of Artificial Intelligence (AI), have put the focus on the Edge as it stands as one of the keys for the next technological revolution: the seamless integration of AI in our daily life. However, training and deployment of custom AI solutions on embedded devices require a fine-grained integration of data, algorithms, and tools to achieve high accuracy. Such integration requires a high level of expertise that becomes a real bottleneck for small and medium enterprises wanting to deploy AI solutions on the Edge which, ultimately, slows down the adoption of AI on daily-life applications. In this work, we present a modular AI pipeline as an integrating framework to bring data, algorithms, and deployment tools together. By removing the integration barriers and lowering the required expertise, we can interconnect the different stages of tools and provide a modular end-to-end development of AI products for embedded devices. Our AI pipeline consists of four modular main steps: i) data ingestion, ii) model training, iii) deployment optimization and, iv) the IoT hub integration. To show the effectiveness of our pipeline, we provide examples of different AI applications during each of the steps. Besides, we integrate our deployment framework, LPDNN, into the AI pipeline and present its lightweight architecture and deployment capabilities for embedded devices. Finally, we demonstrate the results of the AI pipeline by showing the deployment of several AI applications such as keyword spotting, image classification and object detection on a set of well-known embedded platforms, where LPDNN consistently outperforms all other popular deployment frameworks.

cs.LG↗

arXiv2020

EEG-TCNet: An Accurate Temporal Convolutional Network for Embedded Motor-Imagery Brain-Machine Interfaces

In recent years, deep learning (DL) has contributed significantly to the improvement of motor-imagery brain-machine interfaces (MI-BMIs) based on electroencephalography(EEG). While achieving high classification accuracy, DL models have also grown in size, requiring a vast amount of memory and computational resources. This poses a major challenge to an embedded BMI solution that guarantees user privacy, reduced latency, and low power consumption by processing the data locally. In this paper, we propose EEG-TCNet, a novel temporal convolutional network (TCN) that achieves outstanding accuracy while requiring few trainable parameters. Its low memory footprint and low computational complexity for inference make it suitable for embedded classification on resource-limited devices at the edge. Experimental results on the BCI Competition IV-2a dataset show that EEG-TCNet achieves 77.35% classification accuracy in 4-class MI. By finding the optimal network hyperparameters per subject, we further improve the accuracy to 83.84%. Finally, we demonstrate the versatility of EEG-TCNet on the Mother of All BCI Benchmarks (MOABB), a large scale test benchmark containing 12 different EEG datasets with MI experiments. The results indicate that EEG-TCNet successfully generalizes beyond one single dataset, outperforming the current state-of-the-art (SoA) on MOABB by a meta-effect of 0.25.

eess.SP↗

arXiv2020

Optimizing Temporal Convolutional Network inference on FPGA-based accelerators

Convolutional Neural Networks are extensively used in a wide range of applications, commonly including computer vision tasks like image and video classification, recognition, and segmentation. Recent research results demonstrate that multilayer(deep) networks involving mono-dimensional convolutions and dilation can be effectively used in time series and sequences classification and segmentation, as well as in tasks involving sequence modelling. These structures, commonly referred to as Temporal Convolutional Networks (TCNs), have been demonstrated to consistently outperform Recurrent Neural Networks in terms of accuracy and training time [1]. While FPGA-based inference accelerators for classic CNNs are widespread, literature is lacking in a quantitative evaluation of their usability on inference for TCN models. In this paper we present such an evaluation, considering a CNN accelerator with specific features supporting TCN kernels as a reference and a set of state-of-the-art TCNs as a benchmark. Experimental results show that, during TCN execution, operational intensity can be critical for the overall performance. We propose a convolution scheduling based on batch processing that can boost efficiency up to 96% of theoretical peak performance. Overall we can achieve up to 111,8 GOPS/s and power efficiency of 33,9 GOPS/s/W on an Ultrascale+ ZU3EG (up to 10x speedup and 3x power efficiency improvement with respect to pure software implementation).

eess.SP↗