SearcharxivSearch

arXiv subjects

Luca Michel

Publications and source records attributed to Luca Michel.

6 recordsLinked to original sources

The fracture resistance of elastic networks increases with the density of defects like a random walk

Disordered spring networks are a well-established model system to study fracture in a wide range of materials, from ceramics to polymer networks and mechanical metamaterials, across length scales from the atomistic to the macroscopic. A central quantity characterizing fracture is the apparent fracture energy $G^c$, which measures the resistance to the propagation of a preexisting dominant crack. While it is well established that disorder can increase $G^c$ through crack arrest by local inhomogeneities, its dependence on the degree of disorder remains poorly understood. Here, we study the effect of varying concentrations of missing bonds on crack propagation of an otherwise perfect two-dimensional triangular network of springs. For a given network with a fixed concentration of missing bonds, the apparent fracture energy $G^c(a)$ increases with crack advance $a$. This behavior can be explained by mapping the effect of the missing bonds onto an equivalent local fracture energy landscape $\Gamma^{loc}(a)$ and applying established theories linking planar crack arrest with fluctuations in $\Gamma^{loc}(a)$. For increasing fraction of missing bonds $\nu$, the standard deviation of the fluctuations of $\Gamma^{loc}$ increases with $\sqrt{\nu}$, which we explain by considering a random-walk-like superposition of perturbations caused by individual missing bonds. We demonstrate that as a consequence of crack arrest by fluctuations in $\Gamma^{loc}$, the average $G^c(a)$ follows the same $\sqrt{\nu}$ scaling. Furthermore, we observe that the probability density of $\Gamma^{loc}$ has an exponential tail leading to a logarithmic increase of $G^c(a)$ with crack advance $a$. Our results quantitatively link microstructural disorder to macroscopic fracture energy and paves the way for quantitative predictions of the fracture energy in a wide variety of materials.

cond-mat.soft

Less is more: removing a single bond increases the toughness of elastic networks

We investigate how the removal of a single bond affects the fracture behavior of triangular spring networks, whereby we systematically vary the position of the removed bond. Our simulations show that removing the bond has two contrasting effects on the fracture energy for initiation of crack propagation and on the fracture energy for failure of the entire network. A single missing bond can either lower or raise the initiation fracture energy, depending on its placement relative to the crack tip. In contrast, the failure fracture energy is always equal to or greater than that of a perfect network. For most initial placements of the missing bond, the crack path remains straight, and the increased failure fracture energy results from arrest at the point of maximum local fracture resistance. When the crack deviates from a straight path, we observe an even higher fracture energy, which we attribute primarily to crack bridging. This additional toughening mechanism becomes active only at low failure strains of the springs; at higher failure strains, the crack path tends to remain straight. Altogether, our results demonstrate that even a single bond removal can significantly enhance toughness, offering fundamental insights into the role of defects in polymer networks and informing the design of tough architected materials.

cond-mat.soft

Contact point geometry governs structural build-up at rest in Portland cement-limestone blends

The early stiffening of fresh cement paste plays a key role in shaping and stability during casting and 3D printing. In Portland cement systems, this phenomenon arises from the formation of calcium-silicate-hydrate (C-S-H), which stiffens grain-to-grain contacts. However, the role of powder characteristics such as particle size and morphology remains poorly understood. Here, we vary the fineness and grain shape by blending Portland cement with either coarse or fine limestone, leveraging the affinity of C-S-H to nucleate on limestone surfaces. By coupling calorimetry and rheometry, we relate the amount of formed hydration products to the increase in stiffness, and show that the mechanism of contact stiffening through C-S-H formation remains unchanged with limestone addition. Nevertheless, the rate of stiffening varies across blends. We find that these rates correlate with a characteristic length scale that captures particle size and shape. These results demonstrate that early stiffening depends not only on the amount of hydration products formed, but also on the geometry of the contacts where these products form, offering a framework for understanding more complex systems such as limestone-calcined clay cements.

cond-mat.soft

Elasticity of bidisperse attractive particle systems

Bidisperse particle systems are common in both natural and engineered materials, and it is known to influence packing, flow, and stability. However, their direct effect on elastic properties, particularly in systems with attractive interactions, remains poorly understood. Gaining insight into this relationship is important for designing soft particle-based materials with desired mechanical response. In this work, we study how particle size ratio and composition affect the shear modulus of attractive particle systems. Using coarse-grained molecular simulations, we analyze systems composed of two particle sizes at fixed total packing fraction and find that the shear modulus increases systematically with bidispersity. To explain this behavior, we develop two asymptotic models following limiting cases: one where a percolated network of large particles is stiffened by small particles, and another where a small-particle network is modified by embedded large particles. Both models yield closed-form expressions that capture the qualitative trends observed in simulations, including the dependence of shear modulus on size ratio and relative volume fraction. Our results demonstrate that bidispersity can enhance elastic stiffness through microstructural effects, independently of overall density, offering a simple strategy to design particle-based materials with tunable mechanical properties.

cond-mat.soft

A thermo-hygro computational model to determine the factors dictating cold joint formation in 3D printed concrete

Cold joints in extruded concrete structures form once the exposed surface of a deposited filament dries prematurely and gets sequentially covered by a layer of fresh concrete. This creates a material heterogeneity which lowers the structural durability and shortens the designed service life. Many factors concurrently affect cold joint formation, yet a suitable tool for their categorization is missing. Here, we present a computational model that simulates the drying kinetics at the exposed structural surface, accounting for cement hydration and the resulting microstructural development. The model provides a time estimate for cold joint formation as a result. It allows us to assess the drying severity for a given structure's geometry, its interaction with the environment, and ambient conditions. We evaluate the assessed factors and provide generalized recommendations for cold joint mitigation.

cond-mat.soft

Structural build-up at rest in the induction and acceleration periods of OPC

Structural build-up in fresh cement paste at rest is characterized by time evolutions of storage modulus and yield stress, which both increase linearly in time during the induction period of hydration, followed by an exponential evolution after entering the acceleration period. While it is understood that C-S-H formation at contact points between cement particles dictates build-up in the acceleration period, the mechanism in the induction period lacks consensus. Here, we provide experimental evidence that, at least in absence of admixtures, structural build-up at rest originates in both periods from the same mechanism. We couple calorimetry and oscillatory shear measurements of OPC at different w/c ratios, capturing how the storage modulus evolves with changes in cumulative heat. We obtain an exponential relation between stiffness and heat, with the same exponent in both the induction and acceleration periods. This suggests that C-S-H formation dictates build-up at rest in both periods.

cond-mat.soft