Searcharxiv⌕ Search

arXiv subjects

Luca Potì

Publications and source records attributed to Luca Potì.

8 recordsLinked to original sources
arXiv2026

Nonlinearity Compensation for Coherent Optical Satellite Communications

Optical satellite uplinks rely on high-power optical amplifiers (HPOAs) to overcome free-space attenuation and enable long-distance transmission. However, at high power levels, fiber Kerr nonlinearity becomes significant and degrades system performance. In this work, we develop a realistic model for optical uplinks that accounts for nonlinear effects and analyze their impact, highlighting key differences from conventional longhaul fiber systems. We then introduce low-complexity digital signal processing techniques for nonlinearity compensation, based on constellation shaping via a look-up table (LUT) and a simple nonlinear phase rotation applied at the transmitter and/or receiver. The LUT also enables adaptive rate tuning according to channel conditions, enhancing robustness against link variations. Simulation results show that the proposed techniques increase the maximum acceptable link loss by up to 6 dB with negligible complexity. Finally, we show that, at the system level, propagation in the HPOA can be modeled as a simple nonlinear phase rotation, equivalent to propagation in a zero-dispersion noiseless fiber link, and fully characterized by a single parameter - the characteristic nonlinear power.

cs.IT↗
arXiv2026

Discrete-modulation continuous-variable quantum key distribution with probabilistic amplitude shaping over a linear quantum channel

The practical implementation difficulties arising from the Gaussian modulation of the GG02 protocol lead us to investigate the possibilities offered by the combination of probabilistic amplitude shaping technique and quadrature amplitude modulation formats in the context of continuous variable quantum key distribution systems. Our interest comes from the fact that quadrature amplitude modulation and probabilistic shaping can be implemented with current technologies and are widely used in classical telecom equipment. In this treatment, we assume to work in the scenario of a linear quantum channel and we analyze maximum achievable secure key rates, maximum reachable distances and the resilience to noise of our discrete-modulation based protocol with respect to GG02, which is taken as a benchmark. In particular, we deal with the infinite key size regime, consider a homodyne detection scheme, and analyze what happens for different cardinalities of the input alphabet at different distances, in the case of collective attacks and in the reverse reconciliation picture. We find that our protocol, beyond being easily reproducible in the laboratory, provides a way to closely approach the theoretical performance offered by GG02 and, at the same time, preserves the ability to assure an unconditional security level.

quant-ph↗
arXiv2026

Hierarchical Distribution Matcher Design for Probabilistic Constellation Shaping Based on a Novel Semi-Analytical Optimization Approach

A novel design procedure for practical hierarchical distribution matchers (HiDMs) in probabilistically shaped constellation systems is presented. The proposed approach enables the determination of optimal parameters for any target distribution matcher rate. Specifically, lower bounds on energy loss, rate loss, and memory requirements are analytically estimated for HiDM architectures approximating the Maxwell Boltzmann (MB) distribution. A semi analytical optimization framework is employed to jointly optimize rate and energy loss, allowing the selection of the number of hierarchical layers, memory size, and block length required to optimize channel capacity. The accuracy of the proposed model is validated through probabilistic amplitude shaping of 16QAM (PAS 16QAM), showing good agreement between analytical predictions and simulated results. The proposed analytical tool facilitates the design of HiDM structures that are compatible with practical hardware and implementation constraints, such as those imposed by state-of-the-art application-specific integrated circuits (ASICs) and field-programmable gate arrays (FPGAs). Furthermore, the performance of the optimized HiDM structure, incorporating layer selection based on lower-bound energy loss, is evaluated over the AWGN channel in terms of normalized generalized mutual information (NGMI) as a function of the optical signal-to-noise ratio (OSNR). At a net data rate of 200 Gbps with 25% forward error correction (FEC) overhead, the proposed scheme achieves a shaping gain improvement of 2.8% compared to previously reported solutions.

eess.SP↗
arXiv2023

Probabilistic amplitude shaping for continuous-variable quantum key distribution with discrete modulation over a wiretap channel

To achieve the maximum information transfer and face a possible eavesdropper, the samples transmitted in continuous-variable quantum key distribution (CV-QKD) protocols are to be drawn from a continuous Gaussian distribution. As a matter of fact, in practical implementations the transmitter has a finite (power) dynamics and the Gaussian sampling can be only approximated. This requires the quantum protocols to operate at small powers. In this paper, we show that a suitable probabilistic amplitude shaping of a finite set of symbols allows to approximate at will the optimal channel capacity also for increasing average powers. We investigate the feasibility of this approach in the framework of CV-QKD, propose a protocol employing discrete quadrature amplitude modulation assisted with probabilistic amplitude shaping, and we perform the key generation rate analysis assuming a wiretap channel and lossless homodyne detection.

quant-ph↗
arXiv2015

Coherent 100G Nonlinear Compensation with Single-Step Digital Backpropagation

Enhanced-SSFM digital backpropagation (DBP) is experimentally demonstrated and compared to conventional DBP. A 112 Gb/s PM-QPSK signal is transmitted over a 3200 km dispersion-unmanaged link. The intradyne coherent receiver includes single-step digital backpropagation based on the enhanced-SSFM algorithm. In comparison, conventional DBP requires twenty steps to achieve the same performance. An analysis of the computational complexity and structure of the two algorithms reveals that the overall complexity and power consumption of DBP are reduced by a factor of 16 with respect to a conventional implementation, while the computation time is reduced by a factor of 20. As a result, the proposed algorithm enables a practical and effective implementation of DBP in real-time optical receivers, with only a moderate increase of the computational complexity, power consumption, and latency with respect to a simple feed-forward equalizer for dispersion compensation.

cs.OH↗
arXiv2015

Optical Time-Frequency Packing: Principles, Design, Implementation, and Experimental Demonstration

Time-frequency packing (TFP) transmission provides the highest achievable spectral efficiency with a constrained symbol alphabet and detector complexity. In this work, the application of the TFP technique to fiber-optic systems is investigated and experimentally demonstrated. The main theoretical aspects, design guidelines, and implementation issues are discussed, focusing on those aspects which are peculiar to TFP systems. In particular, adaptive compensation of propagation impairments, matched filtering, and maximum a posteriori probability detection are obtained by a combination of a butterfly equalizer and four 8-state parallel Bahl-Cocke-Jelinek-Raviv (BCJR) detectors. A novel algorithm that ensures adaptive equalization, channel estimation, and a proper distribution of tasks between the equalizer and BCJR detectors is proposed. A set of irregular low-density parity-check codes with different rates is designed to operate at low error rates and approach the spectral efficiency limit achievable by TFP at different signal-to-noise ratios. An experimental demonstration of the designed system is finally provided with five dual-polarization QPSK-modulated optical carriers, densely packed in a 100 GHz bandwidth, employing a recirculating loop to test the performance of the system at different transmission distances.

physics.optics↗