arXiv subjects

Luca Zanotti Fragonara

Publications and source records attributed to Luca Zanotti Fragonara.

8 recordsLinked to original sources

arXiv2026

A Paradigm Shift to Assembly-like Finite Element Model Updating

In general, there is a mismatch between a finite element model {(FEM)} of a structure and its real behaviour. In aeronautics, this mismatch must be small because {FEM}s are a fundamental part of the development of an aircraft and of increasing importance with the trend to more flexible wings in modern designs. Iterative finite element model updating can be computationally expensive for complex structures, and surrogate models can be employed to reduce the computational burden. A novel approach for FEM updating, namely assembly-like, is proposed and validated using real experimental data from a flexible wing. The assembly-like model updating framework implies that the model is updated as parts are assembled. Benchmarking against the classical global, or one-shot, approach demonstrates that the proposed method is more computationally efficient, since a normalised workload proxy based on solver-reported model size and memory footprint indicates about 28\% lower overall effort. Aapproximately 95\% of the required solves are performed on lower-fidelity subassembly models with smaller equation counts and memory requirements. Despite the reduced reliance on full-wing evaluations, the new approach retains the fidelity, within 1\% of a joint natural frequencies and modal shapes index, of the global approach.

cs.CE↗

arXiv2025

Damping Identification Sensitivity in Flutter Speed Estimation

Predicting flutter remains a key challenge in aeroelastic research, with certain models relying on modal parameters, such as natural frequencies and damping ratios. These models are particularly useful in early design stages or for the development of small Unmanned Aerial Vehicles (maximum take-off mass below 7 kg). This study evaluates two frequency-domain system identification methods, Fast Relaxed Vector Fitting (FRVF) and the Loewner Framework (LF), for predicting the flutter onset speed of a flexible wing model. Both methods are applied to extract modal parameters from Ground Vibration Testing data, which are subsequently used to develop a reduced-order model with two degrees of freedom. Results indicate that FRVF and LF-informed models provide reliable flutter speed, with predictions deviating by no more than 3% (FRVF) and 5% (LF) from the N4SID-informed benchmark. The findings highlight the sensitivity of flutter speed predictions to damping ratio identification accuracy and demonstrate the potential of these methods as computationally efficient alternatives for preliminary aeroelastic assessments.

eess.SY↗

arXiv2020

Relation3DMOT: Exploiting Deep Affinity for 3D Multi-Object Tracking from View Aggregation

Autonomous systems need to localize and track surrounding objects in 3D space for safe motion planning. As a result, 3D multi-object tracking (MOT) plays a vital role in autonomous navigation. Most MOT methods use a tracking-by-detection pipeline, which includes object detection and data association processing. However, many approaches detect objects in 2D RGB sequences for tracking, which is lack of reliability when localizing objects in 3D space. Furthermore, it is still challenging to learn discriminative features for temporally-consistent detection in different frames, and the affinity matrix is normally learned from independent object features without considering the feature interaction between detected objects in the different frames. To settle these problems, We firstly employ a joint feature extractor to fuse the 2D and 3D appearance features captured from both 2D RGB images and 3D point clouds respectively, and then propose a novel convolutional operation, named RelationConv, to better exploit the correlation between each pair of objects in the adjacent frames, and learn a deep affinity matrix for further data association. We finally provide extensive evaluation to reveal that our proposed model achieves state-of-the-art performance on KITTI tracking benchmark.

cs.CV↗

arXiv2020

Uncertainty Quantification of Multi-Scale Resilience in Nonlinear Complex Networks using Arbitrary Polynomial Chaos

Resilience characterizes a system's ability to retain its original function when perturbations happen. In the past years our attention mainly focused on small-scale resilience, yet our understanding of resilience in large-scale network considering interactions between components is limited. Even though, recent research in macro and micro resilience pattern has developed analytical tools to analyze the relationship between topology and dynamics across network scales. The effect of uncertainty in a large-scale networked system is not clear, especially when uncertainties cascade between connected nodes. In order to quantify resilience uncertainty across the network resolutions (macro to micro),an arbitrary polynomial chaos (aPC) expansion method is developed in this paper to estimate the resilience subject to parameter uncertainties with arbitrary distributions. For the first time and of particular importance, is our ability to identify the probability of a node in losing its resilience and how the different model parameters contribute to this risk. We test this using a generic networked bi-stable system and this will aid practitioners to both understand macro-scale behaviour and make micro-scale interventions.

nlin.AO↗

arXiv2020

RoIFusion: 3D Object Detection from LiDAR and Vision

When localizing and detecting 3D objects for autonomous driving scenes, obtaining information from multiple sensor (e.g. camera, LIDAR) typically increases the robustness of 3D detectors. However, the efficient and effective fusion of different features captured from LIDAR and camera is still challenging, especially due to the sparsity and irregularity of point cloud distributions. This notwithstanding, point clouds offer useful complementary information. In this paper, we would like to leverage the advantages of LIDAR and camera sensors by proposing a deep neural network architecture for the fusion and the efficient detection of 3D objects by identifying their corresponding 3D bounding boxes with orientation. In order to achieve this task, instead of densely combining the point-wise feature of the point cloud and the related pixel features, we propose a novel fusion algorithm by projecting a set of 3D Region of Interests (RoIs) from the point clouds to the 2D RoIs of the corresponding the images. Finally, we demonstrate that our deep fusion approach achieves state-of-the-art performance on the KITTI 3D object detection challenging benchmark.

cs.CV↗

arXiv2019

Go Wider: An Efficient Neural Network for Point Cloud Analysis via Group Convolutions

In order to achieve better performance for point cloud analysis, many researchers apply deeper neural networks using stacked Multi-Layer-Perceptron (MLP) convolutions over irregular point cloud. However, applying dense MLP convolutions over large amount of points (e.g. autonomous driving application) leads to inefficiency in memory and computation. To achieve high performance but less complexity, we propose a deep-wide neural network, called ShufflePointNet, to exploit fine-grained local features and reduce redundancy in parallel using group convolution and channel shuffle operation. Unlike conventional operation that directly applies MLPs on high-dimensional features of point cloud, our model goes wider by splitting features into groups in advance, and each group with certain smaller depth is only responsible for respective MLP operation, which can reduce complexity and allows to encode more useful information. Meanwhile, we connect communication between groups by shuffling groups in feature channel to capture fine-grained features. We claim that, multi-branch method for wider neural networks is also beneficial to feature extraction for point cloud. We present extensive experiments for shape classification task on ModelNet40 dataset and semantic segmentation task on large scale datasets ShapeNet part, S3DIS and KITTI. We further perform ablation study and compare our model to other state-of-the-art algorithms in terms of complexity and accuracy.

cs.CV↗

arXiv2019

Fast Hierarchical Neural Network for Feature Learning on Point Cloud

The analyses relying on 3D point clouds are an utterly complex task, often involving million of points, but also requiring computationally efficient algorithms because of many real-time applications; e.g. autonomous vehicle. However, point clouds are intrinsically irregular and the points are sparsely distributed in a non-Euclidean space, which normally requires point-wise processing to achieve high performances. Although shared filter matrices and pooling layers in convolutional neural networks (CNNs) are capable of reducing the dimensionality of the problem and extracting high-level information simultaneously, grids and highly regular data format are required as input. In order to balance model performance and complexity, we introduce a novel neural network architecture exploiting local features from a manually subsampled point set. In our network, a recursive farthest point sampling method is firstly applied to efficiently cover the entire point set. Successively, we employ the k-nearest neighbours (knn) algorithm to gather local neighbourhood for each group of the subsampled points. Finally, a multiple layer perceptron (MLP) is applied on the subsampled points and edges that connect corresponding point and neighbours to extract local features. The architecture has been tested for both shape classification and segmentation using the ModelNet40 and ShapeNet part datasets, in order to show that the network achieves the best trade-off in terms of competitive performance when compared to other state-of-the-art algorithms.

cs.CV↗

arXiv2019

GAPNet: Graph Attention based Point Neural Network for Exploiting Local Feature of Point Cloud

Exploiting fine-grained semantic features on point cloud is still challenging due to its irregular and sparse structure in a non-Euclidean space. Among existing studies, PointNet provides an efficient and promising approach to learn shape features directly on unordered 3D point cloud and has achieved competitive performance. However, local feature that is helpful towards better contextual learning is not considered. Meanwhile, attention mechanism shows efficiency in capturing node representation on graph-based data by attending over neighboring nodes. In this paper, we propose a novel neural network for point cloud, dubbed GAPNet, to learn local geometric representations by embedding graph attention mechanism within stacked Multi-Layer-Perceptron (MLP) layers. Firstly, we introduce a GAPLayer to learn attention features for each point by highlighting different attention weights on neighborhood. Secondly, in order to exploit sufficient features, a multi-head mechanism is employed to allow GAPLayer to aggregate different features from independent heads. Thirdly, we propose an attention pooling layer over neighbors to capture local signature aimed at enhancing network robustness. Finally, GAPNet applies stacked MLP layers to attention features and local signature to fully extract local geometric structures. The proposed GAPNet architecture is tested on the ModelNet40 and ShapeNet part datasets, and achieves state-of-the-art performance in both shape classification and part segmentation tasks.

cs.CV↗