arXiv subjects

Lucas Bignone

Publications and source records attributed to Lucas Bignone.

13 recordsLinked to original sources

arXiv2026

The properties of central stellar knots embedded in galactic bulges of CIELO simulations

Deeply bound stellar substructures of about 1 kpc at the center of bulges are found in a subset of galaxies from the cosmological chemo-hydrodynamical zoom-in CIELO simulation suite. They were identified as stellar overdensities at the lowest binding energies in each galaxy's circularity-energy $(\epsilon, E)$ plane. We refer to these overdensities as stellar knots. We aim to characterize their properties in the context of bulge assembly using CIELO simulated galaxies spanning a wide range of stellar masses ($10^{8.0}$-$10^{10.7}\,\mathrm{M}_{\odot}$), with diverse formation histories. We inspect 54 galactic bulges. Within them, we isolate stellar knot candidates in $(\epsilon, E)$ space, and identify 28 robust knots satisfying successive selection criteria: kinematic, concentration, and morphology. We characterize their chemical enrichment, formation timescales, formation sites, progenitor gas origin, and spatial distributions. Across all galaxy masses, knots are systematically alpha-element enhanced, having assembled the bulk of their stellar mass at earlier epochs and on shorter timescales than other bulge populations, with a median of $\sim$2$\,$Gyr versus $\sim$5$\,$Gyr. Regarding their origin, knots are predominantly in-situ ($5\%$ accreted mass fraction, roughly half that of the rest of the bulge), with negligible disk-born stars contribution and the largest gas fractions originating from a primordial central spheroid ($21\%$ versus 16--17$\%$ for the surrounding populations), consistent with being the primary gas fuel for the alpha-element enhancement. In terms of structure, knots exhibit a variety of morphologies, with spheroidal shapes predominating. Dynamical selection in $(\epsilon, E)$ space of CIELO galaxies demonstrates its effectiveness in recovering coeval stellar populations, pointing to stellar knots as plausible fossil signatures of early in-situ bulge assembly.

astro-ph.GA↗

arXiv2026

Angular momentum evolution in the CIELO simulations. I. Temporal evolution of gas-stellar misalignments and baryonic merger timing

Gas-stellar kinematic misalignments trace how galaxies assemble and reorient their angular momentum. Although well documented locally, their continuous evolution remains largely unexplored. We aim to characterise the pathways linking aligned, misaligned, and counter-rotating phases, assessing how gas accretion channels and mergers drive reorientation. We analysed 44 central galaxies from the CIELO simulations from z=3.5 to z=0. We defined kinematic episodes using the intrinsic angle, psi, between the star-forming (SF) gas and stellar angular momentum vectors, interpreting these histories by tracking accreted gas origins and evaluating paired statistical contrasts. Nearly 80% of the simulated galaxies are aligned at z=0, yet 86% experience at least one non-aligned episode. Although 19% of non-aligned episodes last >2 Gyr, their durations do not differ significantly from aligned episodes. Abrupt changes in psi coincide with intervals where accreted gas dominates the pre-existing SF reservoir and is highly tilted relative to pre-existing stars. During transitions, the median mass ratio of accreted to pre-existing SF gas rises from 0.57 to 2.14, and the median angular offset increases from 21.2 to 64.6 deg. While relevant mergers cluster near these boundaries, they can drive either alignment or misalignment regardless of mass ratios or orbits. Instead, mergers triggering abrupt transitions typically encounter hosts that are already partially decoupled. In the simulated sample, gas-stellar misalignment is fundamentally driven by reservoir competition. Mergers act as conditional triggers, but a galaxy's ultimate kinematic fate depends strictly on how newly accreted gas couples to, replaces, or mixes with the pre-existing material as it joins the central SF reservoir.

astro-ph.GA↗

arXiv2026

The connection between surface brightness and satellite systems for central galaxies through Illustris TNG

We analyse different properties of central low-surface-brightness galaxies (LSBGs) and their satellite systems using the simulation Illustris TNG-100, in order to deepen our understanding of the formation mechanism of LSBGs in a $\Lambda$CDM cosmology. We find differences in the spin and the concentrations of the LSBGs haloes and the host haloes of high-surface-brightness galaxies (HSBGs), consistent with previous studies. By analysing their spatial and kinematical distribution of satellites, we find that LSBGs tend to have a larger number of satellites than HSBGs and with a larger velocity dispersion. Moreover, we obtain a continuous relation between the number of satellites and surface brightness, particularly for massive central galaxies. We also find a relation between surface brightness and the relative tangential velocity of the satellites. For a given stellar mass, the existence of LSBGs is strongly correlated with their satellite system dominated by rotation. Furthermore, the satellite system is systematically in counter-rotation with respect to the primary disc in LSBGs. We propose that this fact reflects that these galaxies have not experienced a significantly high rate of mergers, which are more likely associated with radial orbits expected in systems of galaxies with a high surface brightness.

astro-ph.GA↗

arXiv2025

The heartbeat of stellar halos: Insights from the stellar halo mass-metallicity relation

This work investigates the presence and evolution of the MZhR from redshift z=3.5 to z=0, and identifies when galaxies settle on the present-day MZhR. We used central galaxies with log10(Mgal/Msun)=[9,11] from CIELO simulations. We identified stellar halos, from z=3.5 to z=0, using the AM-E method, focusing on the region between the 1.5 optical radius and the virial radius. We presented halo cardiograms, a novel approach to studying the assembly history of stellar halos. Using them, we defined a stability time (tst) as the first time that the median halo metallicity does not change more than \pm 0.1 dex with respect to its value at z=0. CIELO stellar halos reproduce the present-day observed MZhR. At z=3.5, stellar halos already define an MZhR whose slope is similar to the slope at z=0. For a fixed stellar halo mass, the metallicity increases ~0.21 dex from z=3.5 to z=0, reflecting the progressive chemical enrichment provided by the accretion of satellites with diverse masses and different levels of enrichment. When the first stellar halo main contributor (SHMC1) provides a mass fraction at least 20% higher than the remaining contributors, the stellar halo metallicity is set once SHMC1 is fully disrupted (tmerger). This yields a clear correlation between tst and tmerger, with a scatter of 2.2 Gyr driven by the relative importance of the second and third main contributing satellites. We provide two observational tracers for tst: t90 and a stability time from the age-metallicity relation. Our results suggest that estimating tst could serve as a proxy for dating the moment at which the stellar halo reaches the present-day MZhR, as well as for dating the last major merger that builds them. Combined with an estimation of the merger time of the main contributing satellite, it can provide insights into the relative importance of the second and third contributing satellites. (abridged)

astro-ph.GA↗

arXiv2025

Metal-loaded outflows in sub-Milky Way galaxies in the CIELO simulations

Supernova (SN) feedback-driven galactic outflows are a key physical process that contributes to the baryon cycle by regulating the star formation activity, reducing the amount of metals in low-mass galaxies and enriching the circumgalactic (CGM) and intergalactic media (IGM). We aim to understand the chemical loop of sub-Milky Way (MW) galaxies and their nearby regions. We studied 15 simulated central sub-MW galaxies (M* <= 10^10 Msun) and intermediate-mass galaxies (M* \sim 10^10 Msun) from the CIELO-P7 high-resolution simulations. We followed the evolution of the progenitor galaxies, their properties and the characteristics of the outflows within the redshift range z = [0, 7]. We used two dynamically-motivated outflow definitions, unbound outflows and expelled mass rates, to quantify the impact of SN feedback. At z \sim 0, sub-MW galaxies have a larger fraction of their current oxygen mass in the gas phase but have expelled a greater portion beyond the virial radius, compared to their higher-mass counterparts. Galaxies with M* <\sim 10^9 Msun have 10-40 per cent of their total oxygen mass within R200 in the CGM, and an equivalent to 10-60 per cent expelled into the IGM. In contrast, more massive galaxies have most of the oxygen mass locked by the stellar populations. The CGM of low-mass galaxies predominantly contains oxygen low-temperature gas, acting as a metal reservoir. We find that the outflows are more oxygen-rich for sub-MW galaxies, Zout/ZISM \sim 1.5, than for higher-mass galaxies, Zout/ZISM <= 0.5, particularly for z < 2. Mass-loading factors of eta_out \sim 0 - 6 are detected in agreement with observations (abridged).

astro-ph.GA↗

arXiv2025

The mass-metallicity relation of bulges

Context. Bulges, located at the central regions of galaxies, are complex structures, expected to be shaped by the physical processes involved in the assembly history of their host galaxy, such as gravitational collapse, mergers, interactions, and bars. As a consequence a variety of bulges with distinct morphology and chemistry could be produced. Aim. We aim at exploring the existence of a stellar mass-metallicity relation of bulges, MZ*R, and analyze the possible imprint of characteristics features by accretion and migration of stars, which could store information on their assembly histories. Methods. We use 44 central galaxies from the CIELO cosmological simulations. Their stellar masses are within the range of [10^7.6, 10^10.6] Msun. We decomposed the galaxy into bulge and disk using the circularity and binding energies. We track the stellar populations in bulges back in time to their birth location, classifying them as bulge-born in-situ, and disk-born stars and accreted. Results. We find that most of the stars in our bulges are formed in-situ, but 33% of our bulges show a non-negligible contribution of stellar accretion from satellites, which could add to about 35% of the population. The accreted material is generally contribute by two or three satellites at most. In some bulges, we also find up to a 32% of stars that migrated from the disk due to secular evolution, with a median of 10%. Regardless of the formation histories, we found a clear MZ*R for bulges, which is more enriched by about 0.4 dex than the corresponding relation of the disk components, and about 0.15 dex more enriched than the galaxy MZ*R. We find evidence that the dispersion in the bulge MZ*R is influenced by both stellar accretion from satellites and migration from the disk, such that, at a fixed bulge mass, bulges with higher fraction of accreted and migrated stars tend to be less metal-rich (abridged).

astro-ph.GA↗

arXiv2025

Insight into the physical processes that shape the metallicity profiles in galaxies

The distribution of chemical elements in the star-forming regions can store information on the chemical enrichment history of the galaxies. Negative metallicity gradients are expected in galaxies forming inside-out. However, observations show that the metallicity profiles can be broken. We aim to study the diversity of metallicity profiles that can arise in the current cosmological context and compare them with available observations. We also seek to identify the physical processes responsible for breaks in metallicity profiles by using two galaxies as case studies. We analyze central galaxies from the cosmological simulations of the CIELO project, within the stellar mass range [$10^{8.5}$, $10^{10.5}$] M$_\odot$ at $z=0$. A new algorithm, DB-A, was developed to fit multiple power laws to the metallicity profiles, enabling a flexible assessment of metallicity gradients in various galactic regions. The simulations include detailed modeling of gas, metal-dependent cooling, star formation, and supernova feedback. At $z=0$, we find diverse profile shapes, including inner and outer drops and rises, with some galaxies exhibiting double breaks. Gradient values align with observations. A temporal analysis of Local Group analogs shows inner and outer breaks occurring at all cosmic times, with outer breaks being more frequent. Metallicity gradients show high variability at high redshift, transitioning to mild evolution at lower redshift. Most inner breaks show central oxygen enhancement, linked to gas accretion and star formation. Inner drops result from disrupted gas due to feedback-driven outflows. Outer breaks with high metallicities arise from re-accreted material, extended star formation, and CGM-driven gas mixing. Outer drops are common at high redshift, linked to metal-poor gas accretion from cold flows. We highlight the complex interplay of these processes which often act together.

astro-ph.GA↗

arXiv2025

The CIELO Project: The Chemo-dynamical properties of gaLaxies and the cosmic web

The CIELO project introduces a novel set of chemo-dynamical zoom-in simulations designed to simultaneously resolve galaxies and their nearby environments. The initial conditions include a diverse range of cosmic structures, such as local groups, filaments, voids, and walls, allowing for a detailed exploration of galaxies within the broader context of the cosmic web. This study presents the initial conditions and characterizes the global properties of CIELO galaxies and their environments. It focuses on galaxies with stellar masses ranging from log [8,11] solar masses and examines key scaling relations, including the mass-size relation, the Tully-Fisher relation, and the mass-metallicity relation for both stars and star-forming gas. The DisPerSe algorithm was used to determine the positions of CIELO galaxies within the cosmic web, with a specific focus on the Pehuen haloes. The selection of local group volumes was guided by criteria based on the relative positions and velocities of the two primary galaxies. The Pehuen regions were chosen to map walls, filaments, and voids. Synthetic images in the SDSS i, r, and g bands were generated using the SKIRT radiative transfer code. Additionally, a dynamical decomposition was performed to classify galaxy morphologies into bulge, disc, and stellar halo components (abridged).

astro-ph.GA↗

arXiv2024

Unveiling the formation channels of stellar halos through their chemical fingerprints

Stellar halos around galaxies contain key information about their formation and assembly history. Using simulations, we can trace the origins of different stellar populations in these halos, contributing to our understanding of galaxy evolution. We aim to investigate the assembly of stellar halos and their chemical abundances in 28 galaxies from CIELO project with logMgal[9 and 11]Msun. Stellar halos were identified using the AM E method, focusing on the outer regions between the 1.5 optical radius and the virial radius. We divided the stellar populations based on their formation channel: exsitu, endodebris, and insitu, and analyzed their chemical abundances, ages, and spatial distributions. Additionally, we explored correlations between halo mass, metallicity, and alpha element enrichment. CIELO simulations reveal that stellar halos are predominantly composed of accreted material (exsitu and endodebris stars), in agreement with previous works. The mass fraction of these populations is independent of stellar halo mass, though their metallicities scale linearly with it. Exsitu stars tend to dominate the outskirts and be more alpha rich and older, while endodebris stars are more prevalent at lower radii and tend to be less alpha rich and slightly younger. Massive stellar halos require a median of five additional satellites to build 90 percent of their mass, compared to lower mass halos, which typically need fewer (median of 2.5) and lower-mass satellites and are assembled earlier. The diversity of accreted satellite histories results in well defined stellar halo mass metallicity and [alpha/Fe] [Fe/H] relations, offering a detailed view of the chemical evolution and assembly history of stellar halos. We find that the [alpha/Fe] [Fe/H] is more sensitive to the characteristics and star formation history of the contributing satellites than the stellar halo mass metallicity relationship

astro-ph.GA↗

arXiv2023

Redshift evolution of the dark matter haloes shapes

In this work, we aim at investigating the morphology evolution of Milky Way mass-like dark matter haloes selected from the CIELO and IllustrisTNG Projects. The connection between halo shapes and their environment has been studied in previous works at z=0 but their connection remains yet to be fully understood. We focus on the evolution across cosmic time of the halo shapes and the relation with the infalling material, using hydrodynamical simulations. Our findings show that haloes tend to be more triaxial at earlier times as a consequence of stronger accretion in the direction of the filaments. As the haloes evolve towards a dominant isotropic accretion mode and relaxation, their shape at 20 percent of the virial mass becomes more spherical. In agreement with previous results, baryons have an important effect within the inner regions of the haloes, driving them from triaxial to rounder shapes. We also find a correlation between the strength of the quadrupole infalling mode and the degree of ellipticity of the haloes: as the filament strength decreases steadily with redshift, the haloes became more spherical and less elliptical.

astro-ph.GA↗

arXiv2022

Planes of satellites around simulated disk galaxies II: Time-persistent planes of kinematically-coherent satellites in $\Lambda$CDM

We use two zoom-in $\Lambda$CDM hydrodynamical simulations of massive disk galaxies to study the possible existence of fixed satellite groups showing a kinematically-coherent behaviour across evolution (angular momentum conservation and clustering). We identify three such groups in the two simulations, defining kinematically-coherent, time-persistent planes (KPPs) that last at least from virialization to $z=0$ (more than 7 Gyrs). This proves that orbital pole clustering is not necessarily set in at low redshift, representing a long-lived property of galaxy systems. KPPs are thin and oblate, represent $\sim25-40\%$ of the total number of satellites in the system, and are roughly perpendicular to their corresponding central disk galaxies during certain periods, consistently with Milky Way $z=0$ data. KPP satellite members are statistically distinguishable from satellites outside KPPs: they show higher specific orbital angular momenta, orbit more perpendicularly to the central disk galaxy, and have larger pericentric distances, than the latter. We numerically prove, for the first time, that KPPs and the best-quality positional planes share the same space configuration across time, such that KPPs act as `skeletons' preventing the latter of being washed out in short timescales. In one of the satellite-host systems, we witness the late capture of a massive dwarf galaxy endowed with its own satellite system, also organized into a KPP configuration prior to its capture. We briefly explore the consequences this event has on the host's KPP, and on the possible enhancement of the asymmetry in the number of satellites rotating in one sense or the opposite within the KPP.

astro-ph.GA↗

arXiv2021

The evolution of the oxygen abundance gradients in star-forming galaxies in the EAGLE simulations

We analyse the evolution of the oxygen abundance gradient of star-forming galaxies with stellar mass Mstar > 10^9 Mo in the EAGK simulation over the redshift range z=[0, 2.5]. We find that the median metallicity gradient of the simulated galaxies is close to zero at all z, whereas the scatter around the median increases with z. The metallicity gradients of individual galaxies can evolve from strong to weak and vice-versa, since mostly low-metallicity gas accretes onto the galaxy, resulting in enhanced star formation and ejection of metal enriched gas by energy feedback. Such episodes of enhanced accretion, mainly dominated by major mergers, are more common at higher z, and hence contribute to increasing the diversity of gradients. For galaxies with negative metallicity gradients, we find a redshift evolution of ~ -0.03 dex/kpc/\delta z$. A positive mass dependence is found at z< 0.5, which becomes slightly stronger for higher redshifts and, mainly, for Mstar < 10^9.5 Mo. Only galaxies with negative metallicity gradients define a correlation with galaxy size, consistent with an inside-out formation scenario. Our findings suggest that major mergers and/or significant gas accretion can drive strong negative or positive metallicity gradients. The first ones are preferentially associated with disc-dominated galaxies, and the second ones with dispersion-dominated systems. The comparison with forthcoming observations at high redshift will allow a better understanding of the potential role of metallicity gradients as a chemical probe of galaxy formation.

astro-ph.GA↗

arXiv2020

Planes of satellites around simulated disc galaxies: I.- Finding high-quality planar configurations from positional information and their comparison to MW/M31 data

We address the 'plane of satellites problem' by studying planar configurations around two disc galaxies with no late major mergers, formed in zoom-in hydro-simulations. Due to the current lack of good quality kinematic data for M31 satellites, we use only positional information. So far, positional analyses of simulations are unable to find planes as thin and populated as the observed ones. Moreover, they miss systematicity and detail in the plane-searching techniques, as well as in the study of the properties and quality of planes, both in simulations or real data. To fill this gap, i) we extend the 4-galaxy-normal density plot method (Pawlowski et al. 2013) in a way designed to efficiently identify the best quality planes (i.e., thin and populated) without imposing extra constraints on their properties, and ii), we apply it for the first time to simulations. Using zoom-in simulations allows us to mimic MW/M31-like systems regarding the number of satellites involved as well as the galactic disc mass and morphology, in view of possible disc effects. At all timesteps analyzed in both simulations we find satellite planar configurations that are compatible, along given time intervals, with all the spatial characteristics of observed planes identified using the same methodology. However, the fraction of co-orbiting satellites within them is in general low, suggesting time-varying satellite membership. We conclude that high-quality positional planes of satellites are not infrequent in LCDM-formed disc galaxies with a quiet assembly history. Detecting kinematically-coherent, time-persistent planes demands considering the full six-dimensional phase-space information of satellites.

astro-ph.GA↗