arXiv subjects

Luciano Nicastro

Publications and source records attributed to Luciano Nicastro.

17 recordsLinked to original sources

arXiv2026

GRB 250424A: A Case Study of Energy Injection with Multiwavelength Observations

We present a comprehensive multiwavelength analysis of the long-duration gamma-ray burst (GRB) 250424A. Our dataset spans from the prompt gamma-ray emission to late-time optical monitoring, including spectra obtained with the Keck 10\,m telescope. We find that the afterglow light curves display a prominent, simultaneous shallow decay phase in both X-ray and optical bands, followed by an achromatic transition to a standard decay regime. The broadband spectral energy distributions are well-modeled by a single power-law function, indicating a common synchrotron origin for the emission across frequencies. We interpret the afterglow evolution within the framework of a relativistic forward shock refreshed by continuous energy injection. This scenario successfully reproduces the observed temporal and spectral behavior, yielding an isotropic equivalent kinetic energy of $E_{\rm K,iso} \approx 5.5 \times 10^{52}$ erg and an injection index of $q\approx 0.34$ in a constant-density circumburst environment. The shallow decay phase is consistent with sustained energy injection lasting $\sim$ 9 ks. Despite the relatively low redshift, late-time optical observations reveal no distinct supernova component; however, our derived upper limits do not strictly rule out the presence of a typical GRB-associated supernova.

astro-ph.HE↗

arXiv2025

Final design of Cerberus, a three-headed instrument for the OARPAF telescope

Cerberus will be a new scientific instrument for the alt-az, 1m-class OARPAF telescope in Northern Italy. Currently, the telescope operates with a CCD camera used for imaging and photometry. One of the objectives of the project is to improve this observing mode with a tip-tilt lens for image stabilization up to 10Hz. Moreover, a long-slit spectroscopy at R 5900 and an optical fiber échelle spectroscopy at R 9300 observing modes will be included. These addtional two "heads" of Cerberus will be exclusively selected by moving flat 45 degree mirrors by means of a linear stage placed in a new custom interface flange. The flange will replace the existing one, recovering the included field flattener lens, to ensure optical correction of the imaging channel. We present the already procured COTS hardware, the opto-mechanical design of the interface flange, the results of the Zemax ray tracing and the design of the web-based instrument control software.

astro-ph.IM↗

arXiv2025

Easy remote observations using web interfaces: controlling an Italian telescope from Japan, and more

Remote observations are often limited by user interfaces, which seem frozen to another computer era: low performances, outdated programming languages, command-line scripting, high version-dependent software. Instead, web-based tools are standard: using nothing more than a browser, astronomers can interact with a generic observatory in a native cross-platform, remote-born way. We used this approach while advancing in the remotization of the 1m-class OARPAF telescope, located in Northern Italy. The web-based control software provides easy and integrated management of its components. This solution can be exported not only to similar hardware/software facilities, but also to large instruments such as SHARK-NIR at LBT; not only for single operations, but also for procedure scripting. In this contribution we describe our best practices and present two recent, orthogonal use cases: an in-place professional use for exoplanetary transit follow-ups, and the first remote control of the telescope from a Japanese high school, allowing students to independently observe, in their daytime, globular clusters

astro-ph.IM↗

arXiv2024

A nebular origin for the persistent radio emission of fast radio bursts

Fast radio bursts (FRBs) are millisecond-duration, bright ($\sim$Jy) extragalactic bursts, whose production mechanism is still unclear. Recently, two repeating FRBs were found to have a physically associated persistent radio source of non-thermal origin. These two FRBs have unusually large Faraday rotation measure values likely tracing a dense magneto-ionic medium, consistent with synchrotron radiation originating from a nebula surrounding the FRB source. Recent theoretical arguments predict that, if the observed Faraday rotation measure mostly arises from the persistent radio source region, there should be a simple relation between the luminosity of the latter and the first. We report here the detection of a third, less luminous persistent radio source associated with the repeating FRB source FRB20201124A at a distance of 413 Mpc, significantly expanding the predicted relation into the low luminosity - low Faraday rotation measure regime ($<$1000 rad m-2). At lower values of the Faraday rotation measure, the expected radio luminosity falls below the limit of detection threshold for present-day radio telescopes. These findings support the idea that the persistent radio sources observed so far are generated by a nebula in the FRB environment, and that FRBs with low Faraday rotation measure may not show a persistent radio source because of a weaker magneto-ionic medium. This is generally consistent with models invoking a young magnetar as the central engine of the FRB, where the surrounding ionized nebula - or the interacting shock in a binary system - powers the persistent radio source.

astro-ph.HE↗

arXiv2023

Boost recall in QSO selection from highly imbalanced photometric datasets

Context. The identification of bright QSOs is of great importance to probe the intergalactic medium and address open questions in cosmology. Several approaches have been adopted to find such sources in currently available photometric surveys, including machine learning methods. However, the rarity of bright QSOs at high redshifts compared to contaminating sources (such as stars and galaxies) makes the selection of reliable candidates a difficult task, especially when high completeness is required. Aims. We present a novel technique to boost recall (i.e., completeness within the considered sample) in the selection of QSOs from photometric datasets dominated by stars, galaxies, and low-z QSOs (imbalanced datasets). Methods. Our method operates by iteratively removing sources whose probability of belonging to a noninteresting class exceeds a user-defined threshold, until the remaining dataset contains mainly high-z QSOs. Any existing machine learning method can be used as underlying classifier, provided it allows for a classification probability to be estimated. We applied the method to a dataset obtained by cross-matching PanSTARRS1, Gaia, and WISE, and identified the high-z QSO candidates using both our method and its direct multi-label counterpart. Results. We ran several tests by randomly choosing the training and test datasets, and achieved significant improvements in recall which increased from 50% to 85% for QSOs with z>2.5, and from 70% to 90% for QSOs with z>3. Also, we identified a sample of 3098 new QSO candidates on a sample of 2.6x10^6 sources with no known classification. We obtained follow-up spectroscopy for 121 candidates, confirming 107 new QSOs with z>2.5. Finally, a comparison of our candidates with those selected by an independent method shows that the two samples overlap by more than 90% and that both methods are capable of achieving a high level of completeness.

astro-ph.IM↗

arXiv2023

EMU Detection of a Large and Low Surface Brightness Galactic SNR G288.8-6.3

We present the serendipitous detection of a new Galactic Supernova Remnant (SNR), G288.8-6.3 using data from the Australian Square Kilometre Array Pathfinder (ASKAP)-Evolutionary Map of the Universe (EMU) survey. Using multi-frequency analysis, we confirm this object as an evolved Galactic SNR at high Galactic latitude with low radio surface brightness and typical SNR spectral index of $α= -0.41\pm0.12$. To determine the magnetic field strength in SNR G288.8-6.3, we present the first derivation of the equipartition formulae for SNRs with spectral indices $α>-0.5$. The angular size is $1.\!^\circ 8\times 1.\!^\circ 6$ $(107.\!^\prime 6 \times 98.\!^\prime 4)$ and we estimate that its intrinsic size is $\sim40$pc which implies a distance of $\sim1.3$kpc and a position of $\sim140$pc above the Galactic plane. This is one of the largest angular size and closest Galactic SNRs. Given its low radio surface brightness, we suggest that it is about 13000 years old.

astro-ph.HE↗

arXiv2022

The probabilistic random forest applied to the QUBRICS survey: improving the selection of high-redshift quasars with synthetic data

Several recent works have focused on the search for bright, high-z quasars (QSOs) in the South. Among them, the QUasars as BRIght beacons for Cosmology in the Southern hemisphere (QUBRICS) survey has now delivered hundreds of new spectroscopically confirmed QSOs selected by means of machine learning algorithms. Building upon the results obtained by introducing the probabilistic random forest (PRF) for the QUBRICS selection, we explore in this work the feasibility of training the algorithm on synthetic data to improve the completeness in the higher redshift bins. We also compare the performances of the algorithm if colours are used as primary features instead of magnitudes. We generate synthetic data based on a composite QSO spectral energy distribution. We first train the PRF to identify QSOs among stars and galaxies, then separate high-z quasar from low-z contaminants. We apply the algorithm on an updated dataset, based on SkyMapper DR3, combined with Gaia eDR3, 2MASS and WISE magnitudes. We find that employing colours as features slightly improves the results with respect to the algorithm trained on magnitude data. Adding synthetic data to the training set provides significantly better results with respect to the PRF trained only on spectroscopically confirmed QSOs. We estimate, on a testing dataset, a completeness of ~86% and a contamination of ~36%. Finally, 207 PRF-selected candidates were observed: 149/207 turned out to be genuine QSOs with z > 2.5, 41 with z < 2.5, 3 galaxies and 14 stars. The result confirms the ability of the PRF to select high-z quasars in large datasets.

astro-ph.IM↗

arXiv2022

Deep upper limit on the optical emission during a hard X-ray burst from the magnetar SGR J1935+2154

In September 2021 the magnetar SGR J1935+2154 entered a stage of burst/flaring activity in the hard X-ray band. On September 10, 2021 we observed SGR J1935+2154 with the fiber-fed fast optical photon counter IFI+Iqueye, mounted at the 1.22 m Galileo telescope in Asiago. During one of the IFI+Iqueye observing windows a hard X-ray burst was detected with the Fermi Gamma-ray Burst Monitor. We performed a search for any significant increase in the count rate on the 1-s, 10-ms and 1-ms binned IFI+Iqueye light curves around the time of the Fermi burst. No significant peak was detected with a significance above 3$σ$ in an interval of $\pm$90 s around the burst. Correcting for interstellar extinction ($A_V \simeq 5.8$ mag), the IFI+Iqueye upper limits to any possible optical burst from SGR J1935+2154 are $V=10.1$ mag, $V=7.2$ mag and $V=5.8$ mag for the 1-s, 10-ms and 1-ms binned light curves, respectively. The corresponding extinction corrected upper limits to the fluence (specific fluence) are $3.1 \times 10^{-10}$ erg cm$^{-2}$ (0.35 Jy s), $4.2 \times 10^{-11}$ erg cm$^{-2}$ (4.8 Jy $\cdot$ 10 ms), and $1.6 \times 10^{-11}$ erg cm$^{-2}$ (17.9 Jy ms), orders of magnitude deeper than any previous simultaneous optical limit on a magnetar burst. The IFI+Iqueye measurement can also place a more stringent constraint to the spectral index of the optical to hard X-ray fluence of SGR J1935+2154, implying a spectrum steeper than $ν^{0.64}$. Fast optical timing observations of bursts associated with radio emission have then the potential to yield a detection.

astro-ph.HE↗

arXiv2021

Multiwavelength observations of Fast Radio Bursts

The origin and phenomenology of the Fast Radio Burst (FRB) remains unknown despite more than a decade of efforts. Though several models have been proposed to explain the observed data, none is able to explain alone the variety of events so far recorded. The leading models consider magnetars as potential FRB sources. The recent detection of FRBs from the galactic magnetar SGR J1935+2154 seems to support them. Still, emission duration and energetic budget challenge all these models. Like for other classes of objects initially detected in a single band, it appeared clear that any solution to the FRB enigma could only come from a coordinated observational and theoretical effort in an as wide as possible energy band. In particular, the detection and localisation of optical/NIR or/and high-energy counterparts seemed an unavoidable starting point that could shed light on the FRB physics. Multiwavelength (MWL) search campaigns were conducted for several FRBs, in particular for repeaters. Here we summarize the observational and theoretical results and the perspectives in view of the several new sources accurately localised that will likely be identified by various radio facilities worldwide. We conclude that more dedicated MWL campaigns sensitive to the millisecond--minute timescale transients are needed to address the various aspects involved in the identification of FRB counterparts. Dedicated instrumentation could be one of the key points in this respect. In the optical/NIR band, fast photometry looks to be the only viable strategy. Additionally, small/medium size radiotelescopes co-pointing higher energies telescopes look a very interesting and cheap complementary observational strategy.

astro-ph.HE↗

arXiv2015

The On-Site Analysis of the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) observatory will be one of the largest ground-based very high-energy gamma-ray observatories. The On-Site Analysis will be the first CTA scientific analysis of data acquired from the array of telescopes, in both northern and southern sites. The On-Site Analysis will have two pipelines: the Level-A pipeline (also known as Real-Time Analysis, RTA) and the level-B one. The RTA performs data quality monitoring and must be able to issue automated alerts on variable and transient astrophysical sources within 30 seconds from the last acquired Cherenkov event that contributes to the alert, with a sensitivity not worse than the one achieved by the final pipeline by more than a factor of 3. The Level-B Analysis has a better sensitivity (not be worse than the final one by a factor of 2) and the results should be available within 10 hours from the acquisition of the data: for this reason this analysis could be performed at the end of an observation or next morning. The latency (in particular for the RTA) and the sensitivity requirements are challenging because of the large data rate, a few GByte/s. The remote connection to the CTA candidate site with a rather limited network bandwidth makes the issue of the exported data size extremely critical and prevents any kind of processing in real-time of the data outside the site of the telescopes. For these reasons the analysis will be performed on-site with infrastructures co-located with the telescopes, with limited electrical power availability and with a reduced possibility of human intervention. This means, for example, that the on-site hardware infrastructure should have low-power consumption. A substantial effort towards the optimization of high-throughput computing service is envisioned to provide hardware and software solutions with high-throughput, low-power consumption at a low-cost.

astro-ph.IM↗

arXiv2014

DAS: a data management system for instrument tests and operations

The Data Access System (DAS) is a metadata and data management software system, providing a reusable solution for the storage of data acquired both from telescopes and auxiliary data sources during the instrument development phases and operations. It is part of the Customizable Instrument WorkStation system (CIWS-FW), a framework for the storage, processing and quick-look at the data acquired from scientific instruments. The DAS provides a data access layer mainly targeted to software applications: quick-look displays, pre-processing pipelines and scientific workflows. It is logically organized in three main components: an intuitive and compact Data Definition Language (DAS DDL) in XML format, aimed for user-defined data types; an Application Programming Interface (DAS API), automatically adding classes and methods supporting the DDL data types, and providing an object-oriented query language; a data management component, which maps the metadata of the DDL data types in a relational Data Base Management System (DBMS), and stores the data in a shared (network) file system. With the DAS DDL, developers define the data model for a particular project, specifying for each data type the metadata attributes, the data format and layout (if applicable), and named references to related or aggregated data types. Together with the DDL user-defined data types, the DAS API acts as the only interface to store, query and retrieve the metadata and data in the DAS system, providing both an abstract interface and a data model specific one in C, C++ and Python. The mapping of metadata in the back-end database is automatic and supports several relational DBMSs, including MySQL, Oracle and PostgreSQL.

astro-ph.IM↗

arXiv2014

CIWS-FW: a Customizable InstrumentWorkstation Software Framework for instrument-independent data handling

The CIWS-FW is aimed at providing a common and standard solution for the storage, processing and quick look at the data acquired from scientific instruments for astrophysics. The target system is the instrument workstation either in the context of the Electrical Ground Support Equipment for space-borne experiments, or in the context of the data acquisition system for instrumentation. The CIWS-FW core includes software developed by team members for previous experiments and provides new components and tools that improve the software reusability, configurability and extensibility attributes. The CIWS-FW mainly consists of two packages: the data processing system and the data access system. The former provides the software components and libraries to support the data acquisition, transformation, display and storage in near real time of either a data packet stream and/or a sequence of data files generated by the instrument. The latter is a meta-data and data management system, providing a reusable solution for the archiving and retrieval of the acquired data. A built-in operator GUI allows to control and configure the IW. In addition, the framework provides mechanisms for system error and logging handling. A web portal provides the access to the CIWS-FW documentation, software repository and bug tracking tools for CIWS-FW developers. We will describe the CIWS-FW architecture and summarize the project status.

astro-ph.IM↗

arXiv2010

Parallaxes of Southern Extremely Cool objects - I: Targets, Proper motions and first results

We present results from the PARallaxes of Southern Extremely Cool objects (PARSEC) program, an observational program begun in April 2007 to determine parallaxes for 122 L and 28 T southern hemisphere dwarfs using the Wide Field Imager on the ESO 2.2m telescope. The results presented here include parallaxes of 10 targets from observations over 18 months and a first version proper motion catalog. The proper motions were obtained by combining PARSEC observations astrometrically reduced with respect to the UCAC2 Catalog, and the 2MASS Catalog. The resulting median proper motion precision is 5mas/yr for 195,700 sources. The 140 0.3deg2 fields sample the southern hemisphere in an unbiased fashion with the exception of the galactic plane due to the small number of targets in that region. We present preliminary parallaxes with a 4.2 mas median precision for 10 brown dwarfs, 2 of which are within 10pc. These increase by 20% the present number of L dwarfs with published parallaxes. Of the 10 targets, 7 have been previously discussed in the literature: two were thought to be binary but the PARSEC observations show them to be single, one has been confirmed as a binary companion and another has been found to be part of a binary system, both of which will make good benchmark systems. Observations for the PARSEC program will end in early 2011 providing 3-4 years of coverage for all targets. The main expected outputs are: more than a 100% increase of the number of L dwarfs with parallaxes; to increment - in conjuction with published results - to at least 10 the number of objects per spectral subclass up to L9, and; to put sensible limits on the general binary fraction of brown dwarfs. We aim to contribute significantly to the understanding of the faint end of the H-R diagram and of the L/T transition region.

astro-ph.SR↗

arXiv2007

Indexing astronomical database tables using HTM and HEALPix

In various astronomical projects it is crucial to have coordinates indexed tables. All sky optical and IR catalogues have up to 1 billion objects that will increase with forthcoming projects. Also partial sky surveys at various wavelengths can collect information (not just source lists) which can be saved in coordinate ordered tables. Selecting a sub-set of these entries or cross-matching them could be un-feasible if no indexing is performed. Sky tessellation with various mapping functions have been proposed. It is a matter of fact that the astronomical community is accepting the HTM and HEALPix schema as the default for object catalogues and for maps visualization and analysis, respectively. Within the MCS library project, we have now made available as MySQL-callable functions various HTM and HEALPix facilities. This is made possible thanks to the capability offered by MySQL 5.1 to add external plug-ins. The DIF (Dynamic Indexing Facilities) package distributed within the MCS library, creates and manages a combination of Views, Triggers, DB-engine and plug-ins allowing the user to deal with database tables indexed using one or both these pixelisation schema in a completely transparent way.

astro-ph↗

arXiv2007

A Customizable Database Server: MCS, a Flexible Resource for Astronomical Projects

Nowadays medium-large size astronomical projects have to face the management of a large amount of information and data. Dedicated data centres manage the collection of raw and processed data and consequently make them accessible, typically as static files, either via (s)ftp or http (web). However the various steps of data acquisition, archiving, processing and delivering are accomplished by different tools. The data production information (logging) is not always collected into relational databases tables causing long delays before people know about their existence. Luckily the use, in many cases, of standard file formats like FITS can help to track the data origin and processing status. As Virtual Observatory standards will become more common, things will quickly improve. Here we present a software library we implemented in order to use a unified model in astronomical data treatment. All the data are stored into the same database becoming available in different forms to different users with different privileges.

astro-ph↗

arXiv1997

Diffractive Scintillation of the Pulsar PSR B1259-63

PSR B1259-63 is in a highly eccentric 3.4 yr orbit around the Be-star SS2883. The system is located in the direction of the Sagittarius-Carina spiral arm at a distance of $\sim$1.5 kpc. We have made scintillation observations of the pulsar far from periastron at 4.8 GHz and 8.4 GHz, determining the diffractive bandwidth, $Δν_{\rm d}$, and timescale, $Δt_{\rm d}$, at both frequencies. We find no dependency on orbital phase until within 30 days of periastron. The data indicate that the scintillation is caused, not by the circumstellar environment, but by an HII region within the Sagittarius-Carina spiral arm located at least three-quarters of the way to the pulsar. Close to periastron, when the line-of-sight to the pulsar intersects the disk of the Be star, the electron densities within the disk are sufficient to overcome the `lever-arm effect' and produce a reduction in the scintillation bandwidth by six orders of magnitude.

astro-ph↗

arXiv1997

Hubble Space Telescope Imaging of the Optical Transient Associated with GRB970508

We report on Hubble Space Telescope (HST) observations of the optical transient (OT) discovered in the error box of the gamma-ray burst GRB970508. The object was imaged on 1997 June 2 with the Space Telescope Imaging Spectrograph (STIS) and Near-Infrared Camera and Multi-Object Spectrometer (NICMOS). The observations reveal a point-like source with R = 23.1 +- 0.2 and H = 20.6 +- 0.3, in agreement with the power-law temporal decay seen in ground-based monitoring. Unlike the case of GRB970228, no nebulosity is detected surrounding the OT of GRB970508. We set very conservative upper limits of R ~ 24.5 and H ~ 22.2 on the brightness of any underlying extended source. If this subtends a substantial fraction of an arcsecond, then the R band limit is ~25.5. In combination with Keck spectra that show Mg I absorption and [O II] emission at a redshift of z = 0.835, our observations suggest that the OT is located in a star-forming galaxy with total luminosity one order of magnitude lower than the knee of the galaxy luminosity function, L*. Such galaxies are now thought to harbor the majority of star formation at z ~ 1; therefore, these observations may provide support for a link between GRBs and star formation.

astro-ph↗