arXiv subjects

Lucy V. C. Assali

Publications and source records attributed to Lucy V. C. Assali.

13 recordsLinked to original sources

arXiv2025

Ge-based Clinopyroxene series: first principles and experimental local probe study

The structural and electronic properties of the CaMnGe$_2$O$_6$ and SrMnGe$_2$O$_6$ clinopyroxene systems have been investigated by means of perturbed angular correlation (PAC) measurements, performed at ISOLDE, combined with $ab-initio$ electronic structure calculations within the density functional theory (DFT) framework. The partial density of states (PDOS) of the CaMnGe$_2$O$_6$ and SrMnGe$_2$O$_6$ stable compounds has been determined, and it has been observed that the requirement of including an on-site Hubbard-$U$ potential was necessary in order to describe the highly correlated Mn $3d$-states. By considering $U_{eff}$=4 eV, we obtained a band gap width of 1.82 eV and 1.70 eV, for the CaMnGe$_2$O$_6$ and SrMnGe$_2$O$_6$, respectively. Combining electric field gradient (EFG) first principles calculations, using a supercell scheme, with experimental PAC results, we were able to infer that the Cd probe can replace either the $A$ (Ca, Sr) or the Mn sites in the crystalline structures. We also showed that Cd substitution is expected to lead to a reduction in the width of the band gap in these systems, evidencing opportunities for potential band-gap engineering.

cond-mat.mtrl-sci↗

arXiv2025

Enhancing catalyst activity of two-dimensional C$_4$N$_2$ through doping for the hydrogen evolution reaction

This study investigates the structural, electronic, and catalytic properties of pristine and doped C$_4$N$_2$ nanosheets as potential electrocatalysts for the hydrogen evolution reaction. The pristine C$_{36}$N$_{18}$ nanosheets exhibit limited HER activity, primarily due to high positive Gibbs free energies ($>$ 2.2 eV). To enhance catalytic performance, doping with B, Si, or P at the nitrogen site was explored. Among these systems, B-doped C$_{36}$N$_{17}$ nanosheets exhibit the most promising catalytic activity, with a Gibbs free energy close to zero ($\approx -0.2$ eV), indicating efficient hydrogen adsorption. Band structure, projected density of states, charge density, and Bader charge analyses reveal significant changes in the electronic environment due to doping. While stacking configurations (AA$'$A$''$ and ABC) have minimal effect on catalytic performance, doping -- particularly with B -- substantially alters the electronic structure, optimizing hydrogen adsorption and facilitating efficient HER. These findings suggest that B-doped C$_{36}$N$_{17}$ nanosheets could serve as efficient cocatalysts when combined with metallic materials, offering a promising approach to enhance catalytic efficiency in electrocatalytic and photocatalytic applications.

cond-mat.mtrl-sci↗

arXiv2024

Electrical conductivity of MgSiO3 at high temperatures and pressures: implications for the Earth's mantle

The electrical conductivity of magnesium silicate MgSiO3 has been studied, using the framework of the first-principles density functional theory and the Boltzmann transport theory, under the thermodynamic conditions of the Earth's lower mantle. We find that the conductivity of pristine MgSiO3 depends strongly on the structural phase of the material, as well as on temperature and pressure. The conductivity of the perovskite phase increases with increasing pressure (depth of the lower mantle) up to 90 GPa, then decreases at higher pressures due to a change in the material's band gap transition from direct to indirect. Finally, the structural phase transition that MgSiO3 undergoes near the bottom of the lower mantle, from perovskite to post-perovskite, causes an increase in the conductivity of MgSiO3, which should contribute to the increase in the electrical conductivity of the Earth's mantle under the thermodynamic conditions of the Earth's D" layer.

cond-mat.mtrl-sci↗

arXiv2023

Doped 2D diamond: properties and applications

In the present paper, we investigate the structural, thermodynamic, dynamic, elastic, and electronic properties of doped 2D diamond C$_4$X$_2$ (X = B or N) nanosheets in both AA$'$A$''$ and ABC stacking configurations, by first-principles calculations. Those systems are composed of 3 diamond-like graphene sheets, with an undoped graphene layer between two 50% doped ones. Our results, based on the analysis of ab-initio molecular dynamics simulations, phonon dispersion spectra, and Born's criteria for mechanical stability, revealed that all four structures are stable. Additionally, their standard enthalpy of formation values are similar to the one of pristine 2D diamond, recently synthesized by compressing three graphene layers. The C$_4$X$_2$ (X = B or N) systems exhibit high elastic constant values and stiffness comparable to the diamond. The C$_4$N$_2$ nanosheets present wide indirect band gaps that could be advantageous for applications similar to the ones of the hexagonal boron nitride (h-BN), such as a substrate for high-mobility 2D devices. On the other hand, the C$_4$B$_2$ systems are semiconductors with direct band gaps, in the 1.6 - 2.0 eV range, and small effective masses, which are characteristics that may be favorable to high carrier mobility and optoelectronics applications.

cond-mat.mtrl-sci↗

arXiv2022

Aluminum functionalized silicene: a potential anode material for alkali metal ion batteries

We have investigated the possibility of using aluminum functionalized silicene trilayers (ABC-Si$_4$Al$_2$) as an anode material for alkali metal ion batteries (AMIBs). First, we studied the thermodynamic stability of ABC-Si$_4$Al$_2$ using ab-initio molecular dynamics simulations, showing that this material remains stable up to 600 K. Then, we explored the properties of alkali metal atoms (Li, Na, K) adsorption in ABC-Si$_4$Al$_2$, finding several available sites with high adsorption energies. Moreover, we computed the diffusion properties of those atoms along high-symmetry paths using the nudged elastic band method. The results indicated diffusion barriers as low as those in graphite, especially for Na (0.32 eV) and K (0.22 eV), which allows those ions to migrate easily on the material's surface. Our studies also revealed that the full loaded Li$_4$Si$_4$Al$_2$, Na$_2$Si$_4$Al$_2$, and K$_2$Si$_4$Al$_2$ systems provide low open-circuit voltage, ranging from 0.14 to 0.49 V, and large theoretical capacity of 645 mAh/g for Li- and 322 mAh/g for Na- and K-ion batteries, values that are close to the ones in other anode materials, such as graphite, TiO$_2$, and silicene-based systems. Those results indicate that aluminum functionalized few-layer silicene is a promising material for AMIBs anodes, particularly for Na- and K-ion batteries.

cond-mat.mtrl-sci↗

arXiv2021

Functionalized few-layer silicene nanosheets: density functional theory on stability, structural, and electronic properties

Using density functional theory calculations, we investigated the properties of few-layer silicene nanosheets, namely bilayers and trilayers, functionalized with group-III or group-V atoms of the periodic table. We considered the Si$_2$X$_2$ bilayers and the Si$_2$X$_4$ trilayers, X = B, N, Al, P. We computed the structural, energetic, dynamic, elastic, and electronic properties of those systems in several stacking configurations, labeled as AA$'$, AB, AA$'$A$''$, and ABC. The results revealed that AA$'$-Si$_2$N$_2$, AB-Si$_2$N$_2$, AA$'$-Si$_2$P$_2$, AB-Si$_2$P$_2$, ABC-Si$_4$B$_2$, ABC-Si$_4$Al$_2$, AA$'$A$''$-Si$_4$P$_2$, and ABC-Si$_4$P$_2$ nanosheets are all dynamically stable, according to their respective phonon dispersion spectra. Additionally, by comparing the standard enthalpies of formation of doped few-layer silicene systems with the ones of the pristine silicene monolayer, bilayer, and trilayer nanosheets, we found that those structures could be experimentally accessed. Exploring the electronic properties of those stable systems, we discovered that the silicene bilayers and trilayers functionalized with N or P atoms change from a metallic to a semiconducting behavior. However, the metallic behavior is kept when the nanosheets are functionalized with B or Al atoms. Finally, by placing our results within the context of silicon-based systems previous investigations, we could envision potential applications for those nanosheets in van der Waals heterostructures, alkali-metal ion batteries, UV-light devices, and thermoelectric materials.

cond-mat.mtrl-sci↗

arXiv2018

Stability of calcium and magnesium carbonates at lower mantle thermodynamic conditions

We present a theoretical investigation, based on ab initio calculations and the quasi-harmonic approximation, on the stability properties of magnesium (MgCO$_3$) and calcium (CaCO$_3$) carbonates at high temperatures and pressures. The results indicate that those carbonates should be stable in Earth's lower mantle, instead of dissociating into other minerals, in chemical environments with excesses of SiO$_2$, MgO, or MgSiO$_3$. Therefore, considering the lower mantle chemical composition, filled with major minerals such as MgSiO$_3$ and MgO, calcium and magnesium carbonates are the primary candidates as carbon hosts in that region. For the thermodynamic conditions of the mantle, the results also indicate that carbon should be primarily hosted on MgCO$_3$. Finally, the results indicate that carbon, in the form of free CO$_2$, is unlikely in the lower mantle.

cond-mat.mtrl-sci↗

arXiv2017

Importance of van der Waals interaction on structural, vibrational, and thermodynamics properties of NaCl

Thermal equations of state (EoS) are essential in several scientific domains. However, experimental determination of EoS parameters may be limited at extreme conditions, therefore, {\it ab~initio} calculations have become an important method to obtain them. Density Functional Theory (DFT) and its extensions with various degrees of approximations for the exchange and correlation (XC) energy is the method of choice, but large errors in the EoS parameters are still common. The alkali halides have been problematic from the onset of this field and the quest for appropriate DFT functionals for such ionic and relatively weakly bonded systems has remained an active topic of research. Here we use DFT + van der Waals functionals to calculate vibrational properties, thermal EoS, thermodynamic properties, and the B1 to B2 phase boundary of NaCl. Our results reveal i) a remarkable improvement over the performance of standard Local Density Approximation and Generalized Gradient Approximation functionals for all these properties and phase transition boundary, as well as ii) great sensitivity of anharmonic effects on the choice of XC functional.

cond-mat.mtrl-sci↗

arXiv2017

A general procedure for accurate defect excitation energies from DFT-1/2 band structures: The case of NV$^-$ center in diamond

A major challenge in creating a quantum computer is to find a quantum system that can be used to implement the qubits. For this purpose, deep centers are prominent candidates, and ab initio calculations are one of the most important tools to theoretically study their properties. However, these calculations are highly involved, due to the large supercell needed, and the computational cost can be even larger when one goes beyond the Kohn-Sham scheme to correct the band gap problem and achieve good accuracy. In this work, we present a method that overcomes these problems and provides the optical transition energies as a difference of Kohn-Sham eigenvalues; and even more, provides a complete and accurate band structure of the defect in the semiconductor. Despite the original motivations, the presented methodology is a general procedure, which can be used to systematically study the optical transitions between localized levels within the band gap of any system. The method is an extension of the low-cost and parameter-free DFT-1/2 approximate quasi-particle correction, and allows it to be applied in the study of complex defects. As a benchmark, we apply the method to the NV$^-$ center in diamond. The agreement with experiments is remarkable, with an accuracy of 0.1 eV. The band structure agrees with the expected qualitative features of this system, and thus provides a good intuitive physical picture by itself.

cond-mat.mtrl-sci↗

arXiv2012

Structural, Electronic, and Vibrational Properties of Amino-adamantane and Rimantadine Isomers

We performed a first principles total energy investigation on the structural, electronic, and vibrational properties of adamantane molecules, functionalized with amine and ethanamine groups. We computed the vibrational signatures of amantadine and rimantadine isomers with the functional groups bonded to different carbon sites. By comparing our results with recent infrared and Raman spectroscopic data, we discuss the possible presence of different isomers in experimental samples.

physics.chem-ph↗

arXiv2012

Group-IV graphene- and graphane-like nanosheets

We performed a first principles investigation on the structural and electronic properties of group-IV (C, SiC, Si, Ge, and Sn) graphene-like sheets in flat and buckled configurations and the respective hydrogenated or fluorinated graphane-like ones. The analysis on the energetics, associated with the formation of those structures, showed that fluorinated graphane-like sheets are very stable, and should be easily synthesized in laboratory. We also studied the changes on the properties of the graphene-like sheets, as result of hydrogenation or fluorination. The interatomic distances in those graphane-like sheets are consistent with the respective crystalline ones, a property that may facilitate integration of those sheets within three-dimensional nanodevices.

cond-mat.mtrl-sci↗

arXiv2012

Functionalized adamantane: fundamental building blocks for nanostructure self-assembly

We report first principles calculations on the electronic and structural properties of chemically functionalized adamantane molecules, either in isolated or crystalline forms. Boron and nitrogen functionalized molecules, aza-, tetra-aza-, bora-, and tetra-bora-adamantane, were found to be very stable in terms of energetics, consistent with available experimental data. Additionally, a hypothetical molecular crystal in a zincblende structure, involving the pair tetra-bora-adamantane and tetra-aza-adamantane, was investigated. This molecular crystal presented a direct and large electronic bandgap and a bulk modulus of 20 GPa. The viability of using those functionalized molecules as fundamental building blocks for nanostructure self-assembly is discussed.

cond-mat.mtrl-sci↗

arXiv2011

Hyperfine interactions in silicon quantum dots

We present an all-electron calculation of the hyperfine parameters for conduction electrons in Si, showing that: (i) all parameters scale linearly with the spin density at a $^{29}$Si site; (ii) the isotropic term is over 30 times larger than the anisotropic part; (iii) conduction electron charge density at a Si nucleus is consistent with experimental estimates; (iv) Overhauser fields in natural Si quantum dots (QDs) are two orders of magnitude smaller than in GaAs QDs. This reinforces the outstanding performance of Si in keeping spin coherence and opens access to reliable quantitative information aiming at spintronic applications.

cond-mat.mes-hall↗