arXiv subjects

Luigi Gambarotta

Publications and source records attributed to Luigi Gambarotta.

16 recordsLinked to original sources

arXiv2021

A dynamic high-frequency consistent continualization of beam-lattice materials

The main purpose of the present paper is to solve the thermodynamic inconsistencies that result when deriving equivalent micropolar models of periodic beam-lattice materials through standard continualization schemes. In fact, this technique identifies higher order micropolar continua characterized by non-positive defined elastic potential energy. Despite this, such models are capable of accurately simulating the optical branches of the discrete Lagrangian model, a property lacking in the thermodynamically consistent standard micropolar continuum. To overcome these thermodynamic inconsistencies while preserving good simulations of the frequency band structure, a dynamic high-frequency consistent continualization is proposed. This continualization scheme is based on a first order regularization approach coupled with a suitable transformation of the difference equation of motion of the discrete Lagrangian system into pseudo-differential equations. A formal Taylor expansion of the pseudo-differential operators allows to obtain differential field equations at various orders according to the continualization order. Thermodynamically consistent higher order micropolar continua with non-local elasticity and inertia are obtained. Finally, the convergence of the frequency band structure of the higher order micropolar models to that of the discrete Lagrangian system is shown as the continualization order increases.

physics.class-ph↗

arXiv2021

Enhanced dynamic homogenization of hexagonally packed granular materials with elastic interfaces

It is well known that the classical energetically consistent micropolar model has limits in simulating the frequency band structure of packed granular materials (see Merkel et al., 2011). It is here shown that if a standard continualization of the difference equation of motion of the discrete model is carried out, an equivalent micropolar continuum is obtained which is able to accurately simulate the optical branches of the discrete model. Nevertheless, this homogenized continuum presents non-positive defined elastic potential energy, a deficiency that limits the reliability of the model and implies instability phenomena (destabilizing effects) in the acoustic branches. This drawback is circumvented here through an high-frequency dynamic homogenization scheme which is based on an enhanced continualization of the discrete governing equations into pseudo-differential equations. Through a formal Taylor expansion of the pseudo-differential operators a higher order differential equation corresponding to the governing equation of a non-local continuum thermodynamically consistent are obtained. The resulting approach allows obtaining an equivalent micropolar continuum characterized by inertial non-locality. Moreover, higher order continua with non-local constitutive and inertial terms may be derived. The proposed continuum models are proved to be able to accurately describe both the static and dynamic behavior of the discrete granular model. Finally, the convergence to the response of the discrete system is shown when increasing the order of the higher order continuum.

cond-mat.soft↗

arXiv2020

Chiral two-dimensional periodic blocky materials with elastic interfaces: auxetic and acoustic properties

Two novel chiral block lattice topologies are here conceived having interesting auxetic and acoustic behavior. The architectured chiral material is made up of a periodic repetition of square or hexagonal rigid and heavy blocks connected by linear elastic interfaces, whose chirality results from an equal rotation of the blocks with respect to the line connecting their centroids. The governing equation of the Lagrangian model is derived and a hermitian eigenproblem is formulated to obtain the frequency band structure. An equivalent micropolar continuum is analytically derived through a standard continualization approach in agreement with the procedure proposed by Bacigalupo and Gambarotta (2017) from which an approximation of the frequency spectrum is derived. Moreover, the overall elastic moduli of the equivalent Cauchy continuum are obtained in closed form via a proper condensation procedure. The parametric analysis involving the overall elastic moduli of the Cauchy equivalent continuum model and the frequency band structure is carried out to catch the influence of the chirality angle and of the ratio between the tangential and normal stiffness of the interface. Finally, it is shown how chirality and interface stiffness may affect strong auxeticity and how the equivalent micropolar model provides dispersion curves in excellent agreement with the current ones for a wide range of the wave vector magnitude.

physics.app-ph↗

arXiv2020

Identification of non-local continua for lattice-like materials

The paper is focused on the dynamic homogenization of lattice-like materials with lumped mass at the nodes to obtain energetically consistent models providing accurate descriptions of the acoustic behavior of the discrete system. The equation of motion of the lattice is transformed according to a unitary approach aimed to identify equivalent non-local continuum models of integral-differential and gradient type, the latter obtained through standard or enhanced continualization. The bilateral Z-transform of the difference equation of motion is matched to the governing integral-differential equation of the equivalent continuum in the transformed Fourier space, which has the same frequency band structure as the Lagrangian one. Firstly, it is shown that the approximation of the kernels via Taylor polynomials leads to the differential field equations of higher order continua endowed with non-local constitutive terms. The field equations derived from such approach corresponds to the ones obtained through the so called standard continualization. However, the differential problem turns out to be ill-posed because the non-positive definiteness of the potential energy density of the higher order continuum. Energetically consistent equivalent continua have been identified through a proper mapping correlating the transformed macro-displacements in the Fourier space with a new auxiliary regularizing continuum macro-displacement field in the same space. Specifically, the mapping here introduced has zeros at the edge of the first Brillouin zone. The integral-differential governing equation and the corresponding differential one has been reformulated through an enhanced continualization that is characterized by energetically consistent differential equations. The constitutive and inertial kernels of the integral-differential equation exhibit polar singularities at the edge of the first Brillouin zone.

physics.app-ph↗

arXiv2019

Machine-learning techniques for the optimal design of acoustic metamaterials

Recently, an increasing research effort has been dedicated to analyse the transmission and dispersion properties of periodic acoustic metamaterials, characterized by the presence of local resonators. Within this context, particular attention has been paid to the optimization of the amplitudes and center frequencies of selected stop and pass bands inside the Floquet-Bloch spectra of the acoustic metamaterials featured by a chiral or antichiral microstructure. Novel functional applications of such research are expected in the optimal parametric design of smart tunable mechanical filters and directional waveguides. The present paper deals with the maximization of the amplitude of low-frequency band gaps, by proposing suitable numerical techniques to solve the associated optimization problems. Specifically, the feasibility and effectiveness of Radial Basis Function networks and Quasi-Monte Carlo methods for the interpolation of the objective functions of such optimization problems are discussed, and their numerical application to a specific acoustic metamaterial with tetrachiral microstructure is presented. The discussion is motivated theoretically by the high computational effort often needed for an exact evaluation of the objective functions arising in band gap optimization problems, when iterative algorithms are used for their approximate solution. By replacing such functions with suitable surrogate objective functions constructed applying machine-learning techniques, well performing suboptimal solutions can be obtained with a smaller computational effort. Numerical results demonstrate the effective potential of the proposed approach. Current directions of research involving the use of additional machine-learning techniques are also presented.

physics.comp-ph↗

arXiv2019

A novel layered topology of auxetic materials based on the tetrachiral honeycomb microstructure

Microstructured honeycomb materials may exhibit exotic, extreme and tailorable mechanical properties, suited for innovative technological applications in a variety of modern engineering fields. The paper is focused on analysing the directional auxeticity of tetrachiral materials, through analytical, numerical and experimental methods. Theoretical predictions about the global elastic properties have been successfully validated by performing tensile laboratory tests on tetrachiral samples, realized with high precision 3D printing technologies. Inspired by the kinematic behaviour of the tetrachiral material, a newly-design bi-layered topology, referred to as bi-tetrachiral material, has been theoretically conceived and mechanically modelled. The novel topology virtuously exploits the mutual collaboration between two tetrachiral layers with opposite chiralities. The bi-tetrachiral material has been verified to outperform the tetrachiral material in terms of global Young modulus and, as major achievement, to exhibit a remarkable auxetic behaviour. Specifically, experimental results, confirmed by parametric analytical and computational analyses, have highlighted the effective possibility to attain strongly negative Poisson ratios, identified as a peculiar global elastic property of the novel bi-layered topology.

physics.app-ph↗

arXiv2019

Generalized micropolar continualization of 1D beam lattices

The enhanced continualization approach proposed in this paper is aimed to overcome some drawbacks observed in the homogenization of beam lattices. To this end an enhanced homogenization technique is proposed and formulated to obtain consistent micropolar continuum models of the beam lattices and able to simulate with good approximation the boundary layer effects and the Floquet-Bloch spectrum of the Lagrangian model. The continualization technique here proposed is based on a transformation of the difference equation of motion of the discrete system via a proper down-scaling law into a pseudo-differential problem; a further McLaurin approximation is applied to obtain a higher order differential problem. The formulation is carried out for simple one-dimensional beam lattices that are, nevertheless, characterized by a rather wide variety of static and dynamic behaviors: the rod lattice, the beam lattice with node rotations and a 1D beam lattice model with generalized displacements. Higher order models may be obtained which are characterized by differential problems involving non-local inertia terms together with spatial high gradient terms. Moreover, the homogenized models obtained by the proposed enhanced continualization technique turn out to be energetically consistent and provide a good simulation of both the static response and of the acoustic spectrum of the original discrete models. The proposed homogenization procedure is first presented for the simple case of monoatomic axial chains. The beam lattice with node rotations and displacement prevented exhibits, in the static regime, decaying oscillations of the nodal rotation in the boundary layer which is well simulated by the homogenized model obtained by the proposed approach.

physics.comp-ph↗

arXiv2019

Acoustic waveguide filters made up of rigid stacked materials with elastic joints

The acoustic dispersion properties of monodimensional waveguide filters can be assessed by means of the simple prototypical mechanical system made of an infinite stack of periodic massive blocks, connected to each other by elastic joints. The linear undamped dynamics of the periodic cell is governed by a two degree-of-freedom Lagrangian model. The eigenproblem governing the free propagation of shear and moment waves is solved analytically and the two dispersion relations are obtained in a suited closed form fashion. Therefore, the pass and stop bandwidths are conveniently determined in the minimal space of the independent mechanical parameters. Stop bands in the ultra-low frequency range are achieved by coupling the stacked material with an elastic half-space modelled as a Winkler support. A convenient fine approximation of the dispersion relations is pursued by formulating homogenised micropolar continuum models. An enhanced continualization approach, employing a proper Maclaurin approximation of pseudo-differential operators, is adopted to successfully approximate the acoustic and optical branches of the dispersion spectrum of the Lagrangian models, both in the absence and in the presence of the elastic support.

physics.app-ph↗

arXiv2018

Bloch wave filtering in tetrachiral materials via mechanical tuning

The periodic cellular topology characterizing the microscale structure of a heterogeneous material may allow the finest functional customization of its acoustic dispersion properties. The paper addresses the free propagation of elastic waves in micro-structured cellular materials. Focus is on the alternative formulations suited to describe the wave propagation in the material, according to the classic canons of solid or structural mechanics. Adopting the centrosymmetric tetrachiral microstructure as prototypical periodic cell, the frequency dispersion spectrum resulting from a synthetic lagrangian beam-lattice formulation is compared with its counterpart derived from different continuous models (high-fidelity first-order heterogeneous and equivalent homogenized micropolar continuum). Asymptotic perturbation-based approximations and numerical spectral solutions are cross-validated. Adopting the low-frequency band gaps of the material band structures as functional targets, parametric analyses are carried out to highlight the descriptive limits of the synthetic models and to explore the enlarged parameter space described by high-fidelity models. The final tuning of the mechanical properties of the cellular microstructure is employed to successfully verify the wave filtering functionality of the tetrachiral material.

physics.app-ph↗

arXiv2016

Wave propagation in non-centrosymmetric beam-lattices with lumped masses: discrete and micropolar modelling

The in-plane acoustic behavior of non-centrosymmetric lattices having nodes endowed with mass and gyroscopic inertia and connected by massless ligaments with asymmetric elastic properties has been analysed through a discrete model and a continuum micropolar model. In the first case the propagation of harmonic waves and the dispersion functions have been obtained by the discrete Floquet-Bloch approach. It is shown that the optical branch departs from a critical point with vanishing group velocity and for the considered cases this branch is decreasing for increasing the norm of the wave vector from the long wave limit. A micropolar continuum model, useful to approximate the discrete model, has been derived through a continualization method based on a down-scaling law based on a second-order Taylor expansion of the generalized macro-displacement field. It is worth noting that the second order elasticity tensor coupling curvatures and micro-couples turns out to be negative defined also in the general case of non-centrosymmetric lattice. The eigenvalue problem governing the harmonic propagation in the micropolar non-centrosymmetric continuum results in general characterized by a hermitian full matrix that is exact up to the second order in the wave vector. Examples concerning square and equilateral triangular lattices and their acoustic properties have been analysed from both the exact Lagrangian model (within the assumed hypotheses) and the micropolar approximate model. Finally, in consideration of the negative definiteness of the second order elastic tensor of the micropolar model, the loss of strong hyperbolicity of the equation of motion has been investigated.

cond-mat.mtrl-sci↗

arXiv2016

Dispersive wave propagation in two-dimensional rigid periodic blocky materials with elastic interfaces

Dispersive waves in two-dimensional blocky materials with periodic microstructure made up of equal rigid units having polygonal centro-symmetric shape with mass and gyroscopic inertia, connected each other through homogeneous linear interfaces, have been analysed. The acoustic behavior of the resulting discrete Lagrangian model has been obtained through a Floquet-Bloch approach. From the resulting eigenproblem derived by the Euler-Lagrange equations for harmonic wave propagation, two acoustic branches and an optical branch are obtained in the frequency spectrum. A micropolar continuum model to approximate the Lagrangian model has been derived based on a second-order Taylor expansion of the generalized macro-displacement field. The constitutive equations of the equivalent micropolar continuum have been obtained, with the peculiarity that the positive definiteness of the second-order symmetric tensor associated to the curvature vector is not guaranteed and depends both on the ratio between the local tangent and normal stiffness and on the block shape. The same results has been obtained through an extended Hamiltonian derivation of the equations of motion for the equivalent continuum that is related to the Hill-Mandel macro homogeneity condition. Moreover, it is shown that the hermitian matrix governing the eigenproblem of harmonic wave propagation in the micropolar model is exact up to the second order in the norm of the wave vector with respect to the same matrix from the discrete model. To appreciate the acoustic behavior of some relevant blocky materials and to understand the reliability and the validity limits of the micropolar continuum model, some blocky patterns have been analysed: rhombic and hexagonal assemblages and running bond masonry.

cond-mat.mtrl-sci↗

arXiv2016

Optimal design of low-frequency band gaps in anti-tetrachiral lattice meta-materials

The elastic wave propagation is investigated in the beam lattice material characterized by a square periodic cell with anti-tetrachiral microstructure. With reference to the Floquet-Bloch spectrum, focus is made on the band structure enrichments and modifications which can be achieved by equipping the cellular microstructure with tunable local resonators. By virtue of its composite mechanical nature, the so-built inertial meta-material gains enhanced capacities of passive frequency-band filtering. Indeed the number, placement and properties of the inertial resonators can be designed to open, shift and enlarge the band gaps between one or more pairs of consecutive branches in the frequency spectrum. In order to improve the meta-material performance, a nonlinear optimization problem is formulated. The maximum of the largest band gap amplitudes in the low-frequency range is selected as suited objective function. Proper inequality constraints are introduced to restrict the optimal solutions within a compact set of mechanical and geometric parameters, including only physically realistic properties of both the lattice and resonators. The optimization problems related to full and partial band gaps are solved independently, by means of a globally convergent version of the numerical method of moving asymptotes, combined with a quasi-Monte Carlo multi-start technique. The optimal solutions are discussed and compared from the qualitative and quantitative viewpoints, bringing to light the limits and potential of the meta-material performance. The clearest trends emerging from the numerical analyses are pointed out and interpreted from the physical viewpoint. Finally, some specific recommendations about the microstructural design of the meta-material are synthesized.

cond-mat.mtrl-sci↗

arXiv2016

Design of acoustic metamaterials through nonlinear programming

The dispersive wave propagation in a periodic metamaterial with tetrachiral topology and inertial local resonators is investigated. The Floquet-Bloch spectrum of the metamaterial is compared with that of the tetrachiral beam lattice material without resonators. The resonators can be designed to open and shift frequency band gaps, that is, spectrum intervals in which harmonic waves do not propagate. Therefore, an optimal passive control of the frequency band structure can be pursued in the metamaterial. To this aim, a suitable constrained nonlinear optimization problem on a compact set of admissible geometrical and mechanical parameters is stated. According to functional requirements, the particular set of parameters which determines the largest low-frequency band gap between a pair of consecutive branches of the Floquet-Bloch spectrum is obtained. The optimization problem is successfully solved by means of a version of the method of moving asymptotes, combined with a quasi-Monte Carlo multi-start technique.

cond-mat.mtrl-sci↗

arXiv2015

Optimal design of auxetic hexachiral metamaterials with local resonators

A parametric beam lattice model is formulated to analyse the propagation properties of elastic in-plane waves in an auxetic material based on a hexachiral topology of the periodic cell, equipped with inertial local resonators. The Floquet-Bloch boundary conditions are imposed on a reduced order linear model in the only dynamically active degrees-offreedom. Since the resonators can be designed to open and shift band gaps, an optimal design, focused on the largest possible gap in the low-frequency range, is achieved by solving a maximization problem in the bounded space of the significant geometrical and mechanical parameters. A local optimized solution, for a the lowest pair of consecutive dispersion curves, is found by employing the globally convergent version of the Method of Moving asymptotes, combined with Monte Carlo and quasi-Monte Carlo multi-start techniques.

cond-mat.mtrl-sci↗

arXiv2015

Simplified modelling of chiral lattice materials with local resonators

A simplified model of periodic chiral beam-lattices containing local resonators has been formulated to obtain a better understanding of the influence of the chirality and of the dynamic characteristics of the local resonators on the acoustic behavior. The simplified beam-lattices is made up of a periodic array of rigid heavy rings, each one connected to the others through elastic slender massless ligaments and containing an internal resonator made of a rigid disk in a soft elastic annulus. The band structure and the occurrence of low frequency band-gaps are analysed through a discrete Lagrangian model. For both the hexa- and the tetrachiral lattice, two acoustic modes and four optical modes are identified and the influence of the dynamic characteristics of the resonator on those branches is analyzed together with some properties of the band structure. By approximating the generalized displacements of the rings of the discrete Lagrangian model as a continuum field and through an application of the generalized macro-homogeneity condition, a generalized micropolar equivalent continuum has been derived, together with the overall equation of motion and the constitutive equation given in closed form. The validity limits of the micropolar model with respect to the dispersion functions are assessed by comparing the dispersion curves of this model in the irreducible Brillouin domain with those obtained by the discrete model, which are exact within the assumptions of the proposed simplified model.

cond-mat.mtrl-sci↗

arXiv2014

Homogenization of periodic hexa- and tetrachiral cellular solids

The homogenization of auxetic cellular solids having periodic hexachiral and tetrachiral microstructure is dealt with two different techniques. The first approach is based on the representation of the cellular solid as a beam-lattice to be homogenized as a micropolar continuum. The second approach is developed to analyse periodic cells conceived as a two-dimensional domain consisting of deformable portions such as the ring, the ligaments and possibly an embedded matrix internally to these. This approach is based on a second displacement gradient computational homogenization proposed by the Authors (Bacigalupo and Gambarotta, 2010). The elastic moduli obtained by the micropolar homogenization are expressed in analytical form from which it appears explicitly their dependence on the parameter of chirality, which is the angle of inclination of the ligaments with respect to the grid of lines connecting the centers of the rings. For hexachiral cells, the solution of Liu et al., 2012, is found, showing the auxetic property of the lattice together with the elastic coupling modulus between the normal and the asymmetric strains; a property that has been confirmed here for the tetrachiral lattice. Unlike the hexagonal lattice, the classical constitutive equations of the tetragonal lattice turns out to be characterized by the coupling between the normal and shear strains through an elastic modulus that is an odd function of the parameter of chirality. Moreover, this lattice is found to exhibit a remarkable variability of the Young's modulus and of the Poisson's ratio with the direction of the applied uniaxial stress. The properties of the equivalent micropolar continuum are qualitatively detected also in the equivalent second-gradient continuum.

cond-mat.mtrl-sci↗