arXiv subjects

Luigi Ranno

Publications and source records attributed to Luigi Ranno.

12 recordsLinked to original sources

arXiv2026

Ultrawide-angle diffraction-limited 2D beam steering via hybrid integrated metasurface-photonic circuit

Two-dimensional (2D) wide field-of-view (FOV) beam steering is a key enabling capability for emerging free-space optical systems, including inter-satellite optical links, airborne LiDAR, point-to-point optical wireless communications, and collaborative robotic platforms. These applications require rapid acquisition and tracking across both azimuth and elevation; architectures that offer wide scanning in only one dimension while maintaining limited coverage in the orthogonal direction constrain link availability, coverage uniformity, and system agility. Here, we demonstrate a chip-scale platform for ultrawide-angle, diffraction-limited 2D beam steering based on hybrid integration of a silicon photonic integrated circuit (PIC) and an optical metasurface. A free-form micro-optical reflector efficiently transforms the guided waveguide mode into an expanded free-space beam that illuminates an analytically optimized ultrawide-FOV metasurface. The integrated system achieves a measured FOV exceeding 160° while maintaining diffraction-limited beam quality over a broad angular range at telecom wavelengths. This hybrid PIC-metasurface architecture provides a compact and scalable route to high-quality 2D beam steering and establishes a practical pathway toward integrated optical projectors for space-based optical communications and other applications requiring agile, wide-angle, high-fidelity beam control.

physics.optics↗

arXiv2025

Wide field-of-view and large depth-of-field metalenses

The ability to visualize both macroscopic and microscopic features over an extended field of view is essential for endoscopic imaging and other applications ranging from machine vision to microscopy. However, miniaturizing endoscopes introduces inherent trade-offs between size and optical performance, including field-of-view (FOV), depth-of-field (DOF), and resolution. These constraints limit the use of microendoscopes in clinical settings such as early cancer detection within narrow, hard-to-access anatomical regions, including the lung, ovaries, and pancreas. State-of-the-art microendoscopes typically rely on microlens assemblies that increase both cost and size. Their large f-numbers also hinder the collection of high-resolution information from live tissue. In this work, we present two compact metalens designs that provide wide FOV, extended DOF, and high resolution, enabled by custom-tailored point spread functions (PSFs). The devices achieve a full 172 degrees FOV, an extended DOF from 0.4 mm to beyond 300 mm, and a resolution of 30 line pairs per millimeter, all within a 1 mm x 1 mm x 0.2 mm footprint. A key advantage of our approach is the ability to transition seamlessly between low and high magnification without mechanical refocusing. Final images are reconstructed through backend deconvolution, highlighting the potential of hybrid imaging systems that integrate computational techniques with flat-optics components.

physics.optics↗

arXiv2025

Wafer-scale conformal metasurface optics

Curved and conformal optics offer significant advantages by unlocking additional geometric degrees of freedom for optical design. These capabilities enable enhanced optical performance and are essential for meeting non-optical constraints, such as those imposed by ergonomics, aerodynamics, or wearability. However, existing fabrication techniques such as direct electron or laser beam writing on curved substrates, and soft-stamp-based transfer or nanoimprint lithography suffer from limitations in scalability, yield, geometry control, and alignment accuracy. Here, we present a scalable fabrication strategy for curved and conformal metasurface optics leveraging thermoforming, an industry-standard, high-throughput manufacturing process widely used for shaping thermoplastics. Our approach uniquely enables wafer-scale production of highly curved metasurface optics, achieving sub-millimeter radii of curvature and micron-level alignment precision. To guide the design and fabrication process, we developed a thermorheological model that accurately predicts and compensates for the large strains induced during thermoforming. This allows for precise control of metasurface geometry and preservation of optical function, yielding devices with diffraction-limited performance. As a demonstration, we implemented an artificial compound eye comprising freeform micro-metalens arrays. Compared to traditional micro-optical counterparts, the device exhibits an expanded field of view, reduced aberrations, and improved uniformity, highlighting the potential of thermoformed metasurfaces for next-generation optical systems.

physics.optics↗

arXiv2025

2D Addressable Mid-infrared Metasurface Spatial Light Modulator

Active metasurfaces enable dynamic control of light for applications in beam steering, pixelated holography, and adaptive optics, but demonstrations of two-dimensional (2D) electrically addressable arrays have so far been limited. Here we introduce a scalable 2D architecture based on phase-change materials (PCMs) integrated metasurfaces and apply it to realize the first transmissive mid-infrared (mid-IR) spatial light modulator (SLM). The device is fabricated through standard silicon photonic foundry processing combined with backend-of-line (BEOL) integration and employs multilayer backend metal interconnects to implement a crossbar addressing scheme. Each pixel is integrated with a silicon diode selector to suppress sneak-path currents, a feature essential for scaling to large arrays. The result establishes a foundry-compatible route to high-density, large-area active metasurfaces with independently tunable pixels.

physics.optics↗

arXiv2024

Unravelling and circumventing failure mechanisms in chalcogenide optical phase change materials

Chalcogenide optical phase change materials (PCMs) have garnered significant interest for their growing applications in programmable photonics, optical analog computing, active metasurfaces, and beyond. Limited endurance or cycling lifetime is however increasingly becoming a bottleneck toward their practical deployment for these applications. To address this issue, we performed a systematic study elucidating the cycling failure mechanisms of Ge$_2$Sb$_2$Se$_4$Te (GSST), a common optical PCM tailored for infrared photonic applications, in an electrothermal switching configuration commensurate with their applications in on-chip photonic devices. We further propose a set of design rules building on insights into the failure mechanisms, and successfully implemented them to boost the endurance of the GSST device to over 67,000 cycles.

physics.optics↗

arXiv2024

Scalable single-microring hybrid III-V/Si lasers for emerging narrow-linewidth applications

Silicon photonics, compatible with large-scale silicon manufacturing, is a disruptive photonic platform that has indicated significant implications in industry and research areas (e.g., quantum, neuromorphic computing, LiDAR). Cutting-edge applications such as high-capacity coherent optical communication and heterodyne LiDAR have escalated the demand for integrated narrow-linewidth laser sources. To that effect, this work seeks to address this requirement through the development of a high-performance hybrid III-V/silicon laser. The developed integrated laser, utilizes a single microring resonator (MRR), demonstrating single-mode operation with a side mode suppression ratio (SMSR) exceeding 40 dB, with laser output power as high as 16.4 mW. Moving away from current hybrid/heterogeneous laser architectures that necessitate multiple complex control, the developed laser architecture requires only two control parameters. Importantly, this serves to streamline industrial adoption by reducing the complexity involved in characterizing these lasers, at-scale. Through the succinct structure and control framework, a narrow laser linewidth of 2.79 kHz and low relative intensity noise (RIN) of -135 dB/Hz are achieved. Furthermore, optical data transmission at 12.5 Gb/s is demonstrated where a signal-to-noise ratio (SNR) of 10 dB is measured.

physics.optics↗

arXiv2023

Highly-efficient fiber to Si-waveguide free-form coupler for foundry-scale silicon photonics

As silicon photonics transitions from research to commercial deployment, packaging solutions that efficiently couple light into highly-compact and functional sub-micron silicon waveguides are imperative but remain challenging. The 220 nm silicon-on-insulator (SOI) platform, poised to enable large-scale integration, is the most widely adopted by foundries, resulting in established fabrication processes and extensive photonic component libraries. The development of a highly-efficient, scalable and broadband coupling scheme for this platform is therefore of paramount importance. Leveraging two-photon polymerization (TPP) and a deterministic free-form micro-optics design methodology based on the Fermat's principle, this work demonstrates an ultra-efficient and broadband 3-D coupler interface between standard SMF-28 single-mode fibers and silicon waveguides on the 220 nm SOI platform. The coupler achieves a low coupling loss of 0.8 dB for fundamental TE mode, along with 1-dB bandwidth exceeding 180 nm. The broadband operation enables diverse bandwidth-driven applications ranging from communications to spectroscopy. Furthermore, the 3-D free-form coupler also enables large tolerance to fiber misalignments and manufacturing variability, thereby relaxing packaging requirements towards cost reduction capitalizing on standard electronic packaging process flows.

physics.optics↗

arXiv2023

Crown ether decorated silicon photonics for safeguarding against lead poisoning

Lead (Pb2+) toxification in society is one of the most concerning public health crisis that remains unaddressed. The exposure to Pb2+ poisoning leads to a multitude of enduring health issues, even at the part-per-billion scale (ppb). Yet, public action dwarfs its impact. Pb2+ poisoning is estimated to account for 1 million deaths per year globally, which is in addition to its chronic impact on children. With their ring-shaped cavities, crown ethers are uniquely capable of selectively binding to specific ions. In this work, for the first time, the synergistic integration of highly-scalable silicon photonics, with crown ether amine conjugation via Fischer esterification in an environmentally-friendly fashion is demonstrated. This realises a photonic platform that enables the in-situ, highly-selective and quantitative detection of various ions. The development dispels the existing notion that Fischer esterification is restricted to organic compounds, laying the ground for subsequent amine conjugation for various crown ethers. In this work, the platform is engineered for Pb2+ detection, demonstrating a large dynamic detection range of 1 - 262000 ppb with high selectivity against a wide range of relevant ions. These results indicate the potential for the pervasive implementation of the technology to safeguard against ubiquitous lead poisoning in our society.

physics.optics↗

arXiv2023

An Open-Source Multi-functional Testing Platform for Optical Phase Change Materials

Owing to their unique tunable optical properties, chalcogenide phase change materials are increasingly being investigated for optics and photonics applications. However, in situ characterization of their phase transition characteristics is a capability that remains inaccessible to many researchers. In this article, we introduce a multi-functional silicon microheater platform capable of in situ measurement of structural, kinetic, optical, and thermal properties of these materials. The platform can be fabricated leveraging industry-standard silicon foundry manufacturing processes. We fully open-sourced this platform, including complete hardware design and associated software codes.

physics.optics↗

arXiv2023

Multi-material heterogeneous integration on a 3-D Photonic-CMOS platform

Photonics has been one of the primary beneficiaries of advanced silicon manufacturing. By leveraging on mature complementary metal-oxide-semiconductor (CMOS) process nodes, unprecedented device uniformities and scalability have been achieved at low costs. However, some functionalities, such as optical memory, Pockels modulation, and magnetooptical activity, are challenging or impossible to acquire on group-IV materials alone. Heterogeneous integration promises to expand the range of capabilities within silicon photonics. Existing heterogeneous integration protocols are nonetheless not compatible with active silicon processes offered at most photonic foundries. In this work, we propose a novel heterogeneous integration platform that will enable wafer-scale, multi-material integration with active silicon-based photonics, requiring zero-change to existing foundry process. Furthermore, the platform will also pave the way to a class of high-performance devices. We propose a grating coupler design with peak coupling efficiency reaching 93%, an antenna with peak diffraction efficiency in excess of 97%, and a broadband adiabatic polarization rotator with conversion efficiency exceeding 99%.

physics.optics↗

arXiv2021

Free-form micro-optics enabling ultra-broadband low-loss fiber-to-chip coupling

Efficient fiber-to-chip coupling has been a major hurdle to cost-effective packaging and scalable interconnections of photonic integrated circuits. Conventional photonic packaging methods relying on edge or grating coupling are constrained by high insertion losses, limited bandwidth density, narrow band operation, and sensitivity to misalignment. Here we present a new fiber-to-chip coupling scheme based on free-form reflective micro-optics. A design approach which simplifies the high-dimensional free-form optimization problem to as few as two full-wave simulations is implemented to empower computationally efficient design of high-performance free-form reflectors while capitalizing on the expanded geometric degrees of freedom. We demonstrated fiber array coupling to waveguides taped out through a standard foundry shuttle run and backend integrated with 3-D printed micro-optics. A low coupling loss down to 0.5 dB was experimentally measured at 1550 nm wavelength with a record 1-dB bandwidth of 300 nm spanning O to U bands. The coupling scheme further affords large alignment tolerance, high bandwidth density and solder reflow compatibility, qualifying it as a promising optical packaging solution for applications such as wavelength division multiplexing communications, broadband spectroscopic sensing, and nonlinear optical signal processing.

physics.optics↗

arXiv2018

Material, size and environment dependence of plasmon-induced hot carriers in metallic nanoparticles

Harnessing hot electrons and holes resulting from the decay of localized surface plasmons in nanomaterials has recently led to new devices for photovoltaics, photocatalysis and optoelectronics. Properties of hot carriers are highly tunable and in this work we investigate their dependence on the material, size and environment of spherical metallic nanoparticles. In particular, we carry out theoretical calculations of hot carrier generation rates and energy distributions for six different plasmonic materials (Na, K, Al, Cu, Ag and Au). The plasmon decay into hot electron-hole pairs is described via Fermi's Golden Rule using the quasistatic approximation for optical properties and a spherical well potential for the electronic structure. We present results for nanoparticles with diameters up to 40 nm, which are embedded in different dielectric media. We find that small nanoparticles with diameters of 16 nm or less in media with large dielectric constants produce most hot carriers. Among the different materials, Na, K and Au generate most hot carriers. We also investigate hot-carrier induced water splitting and find that simple-metal nanoparticles are useful for initiating the hydrogen evolution reaction, while transition-metal nanoparticles produce dominantly holes for the oxygen evolution reaction.

cond-mat.mtrl-sci↗