arXiv subjects

Luiz A. DaSilva

Publications and source records attributed to Luiz A. DaSilva.

At least 19 recordsLinked to original sources

arXiv2026

GeoRIS: Geofencing With Reconfigurable Intelligent Surfaces

Geofencing refers to controlling the availability of wireless services within a network perimeter. In this paper, we study how RIS can be used to achieve geofencing in outdoor-to-indoor network scenarios. Particularly, we propose GeoRIS, a RIS controller that achieves geofencing by exploiting beam management procedures to control beam alignment in networks with steerable directional transmission links. GeoRIS does not require control over the outdoor base station and can work with or without channel state information. Through simulations based on 3GPP network models, we validate GeoRIS and demonstrate that it can "shield" an indoor network area (for example, by weakening communication links to the point where indoor users cannot meet the minimum requirements of 5G eMBB services). We also highlight an interesting insight: the same RIS can play a dual role, extending or inhibiting outdoor-to-indoor communication. In our simulations, we show that GeoRIS can easily change an indoor space from a "strongly covered area" (e.g., supports eMBB services in approx. 90% of network area) to an "out-of-service area" (e.g., inhibits eMBB services in approx. 90% of network area), or vice-versa, an attractive characteristic in scenarios in which dynamic indoor coverage control is needed.

cs.NI↗

arXiv2026

Towards Energy- and QoS-aware Load Balancing for 5G Advanced: Leveraging O-RAN to Achieve Sustainability and Energy Efficiency

The increasing energy consumption of next-generation mobile networks necessitates the adoption of autonomous and energy-aware management strategies. This article proposes a novel adaptive solution leveraging the O-RAN architecture to optimize energy efficiency while managing its trade-off with QoS. The proposed approach introduces a hierarchical O-RAN-aligned control framework in which a Non-RT RIC periodically computes energy-aware policies from long-term historical data, while a Near-RT RIC enforces those policies through per-UE handover actions on a sub-second timescale. We formulate a joint energy- and QoS-aware load balancing problem as a MINLP model. This model optimizes UE association across O-RUs to minimize transmission power and autonomously deactivate underutilized cells, while enforcing per-UE throughput requirements as explicit constraints at each optimization cycle. To validate the proposed solution, we deploy it in an experimental environment that simulates massive sports events. Experimental results demonstrate 72% energy savings over a 24-hour trace and sub-second handover delays (0.123-0.204 s/UE), confirming the solution's feasibility for autonomous and sustainable 5G Advanced networks. An offline physical-layer throughput evaluation further characterizes the trade-off between energy efficiency and QoS, establishing the operational limits of dynamic cell deactivations. This work provides guidelines for deploying energy-efficient strategies in O-RAN environments and underscores the potential of adaptive solutions for sustainable mobile communications.

cs.NI↗

arXiv2026

On the Robustness of RSMA to Adversarial BD-RIS-Induced Interference

This article investigates the robustness of rate-splitting multiple access (RSMA) in multi-user multiple-input single-output (MISO) systems to interference attacks against channel acquisition induced by beyond-diagonal RISs (BD-RISs). Two primary attack strategies, random and aligned interference, are proposed for fully connected and group-connected reconfigurable intelligent surface (RIS) architectures. Valid random reflection coefficients are generated exploiting the Takagi factorization, while potent aligned interference attacks are achieved through optimization strategies based on a quadratically constrained quadratic program (QCQP) reformulation followed by projections onto the unitary manifold. Our numerical findings reveal that, when perfect channel state information (CSI) is available, RSMA behaves similarly to space-division multiple access (SDMA) and thus is highly susceptible to the attack, with BD-RIS inducing severe performance loss and significantly outperforming diagonal RIS. However, under imperfect CSI, RSMA consistently demonstrates significantly greater robustness than SDMA, particularly as the system's transmit power increases.

eess.SP↗

arXiv2025

Managing O-RAN Networks: xApp Development from Zero to Hero

The Open Radio Access Network (O-RAN) Alliance proposes an open architecture that disaggregates the RAN and supports executing custom control logic in near-real time from third-party applications, the xApps. Despite O-RAN's efforts, the creation of xApps remains a complex and time-consuming endeavor, aggravated by the sometimes fragmented, outdated, or deprecated documentation from the O-RAN Software Community (OSC). These challenges hinder academia and industry from developing and validating solutions and algorithms on O-RAN networks. This tutorial addresses this gap by providing the first comprehensive guide for developing xApps to manage the O-RAN ecosystem from theory to practice. We provide a thorough theoretical foundation of the O-RAN architecture and detail the functionality offered by Near Real-Time RAN Intelligent Controller (Near-RT RIC) components. We examine the xApp design and configuration. We explore the xApp lifecycle and demonstrate how to deploy and manage xApps on a Near-RT RIC. We address the xApps' interfaces and capabilities, accompanied by practical examples. We provide comprehensive details on how xApps can control the RAN. We discuss debugging strategies and good practices to aid the xApp developers in testing their xApps. Finally, we review the current landscape and open challenges for creating xApps.

cs.NI↗

arXiv2025

Learning and Reconstructing Conflicts in O-RAN: A Graph Neural Network Approach

The Open Radio Access Network (O-RAN) architecture enables the deployment of third-party applications on the RAN Intelligent Controllers (RICs). However, the operation of third-party applications in the Near Real-Time RIC (Near-RT RIC), known as xApps, may result in conflicting interactions. Each xApp can independently modify the same control parameters to achieve distinct outcomes, which has the potential to cause performance degradation and network instability. The current conflict detection and mitigation solutions in the literature assume that all conflicts are known a priori, which does not always hold due to complex and often hidden relationships between control parameters and Key Performance Indicators (KPIs). In this paper, we introduce the first data-driven method for reconstructing and labeling conflict graphs in O-RAN. Specifically, we leverage GraphSAGE, an inductive learning framework, to dynamically learn the hidden relationships between xApps, parameters, and KPIs. Our numerical results, based on a conflict model used in the O-RAN conflict management literature, demonstrate that our proposed method can effectively reconstruct conflict graphs and identify the conflicts defined by the O-RAN Alliance.

cs.NI↗

arXiv2023

Dimensioning spectrum to support ultra-reliable low-latency communication

Industry-led initiatives such as the Next G Alliance (NGA) are currently considering how to dimension the spectrum required to support new classes of services envisioned beyond 5G. In particular, support for URLLC brings the challenge of how to dimension stochastic wireless networks to meet stringent reliability and latency requirements. Our analysis indicates that the bandwidth needed to meet URLLC goals can be in the order of gigahertz, beyond what is available in today's mobile networks. Network densification can ease those bandwidth needs but requires new deployment strategies involving substantially larger numbers of sites. As an alternative, we consider multi-connectivity and multi-operator network sharing as efficient ways to reduce the demand for bandwidth without outright deployment of additional base stations.

cs.NI↗

arXiv2022

Reconfigurable Intelligent Surfaces: The New Frontier of Next G Security

RIS is one of the significant technological advancements that will mark next-generation wireless. RIS technology also opens up the possibility of new security threats, since the reflection of impinging signals can be used for malicious purposes. This article introduces the basic concept for a RIS-assisted attack that re-uses the legitimate signal towards a malicious objective. Specific attacks are identified from this base scenario, and the RIS-assisted signal cancellation attack is selected for evaluation as an attack that inherently exploits RIS capabilities. The key takeaway from the evaluation is that an effective attack requires accurate channel information, a RIS deployed in a favorable location (from the point of view of the attacker), and it disproportionately affects legitimate links that already suffer from reduced path loss. These observations motivate specific security solutions and recommendations for future work.

cs.CR↗

arXiv2022

Adaptive Height Optimisation for Cellular-Connected UAVs using Reinforcement Learning

Providing reliable connectivity to cellular-connected UAV can be very challenging; their performance highly depends on the nature of the surrounding environment, such as density and heights of the ground BSs. On the other hand, tall buildings might block undesired interference signals from ground BSs, thereby improving the connectivity between the UAVs and their serving BSs. To address the connectivity of UAVs in such environments, this paper proposes a RL algorithm to dynamically optimise the height of a UAV as it moves through the environment, with the goal of increasing the throughput or spectrum efficiency that it experiences. The proposed solution is evaluated in two settings: using a series of generated environments where we vary the number of BS and building densities, and in a scenario using real-world data obtained from an experiment in Dublin, Ireland. Results show that our proposed RL-based solution improves UAVs QoS by 6% to 41%, depending on the scenario. We also conclude that, when flying at heights higher than the buildings, building density variation has no impact on UAV QoS. On the other hand, BS density can negatively impact UAV QoS, with higher numbers of BSs generating more interference and deteriorating UAV performance.

eess.SP↗

arXiv2021

REQIBA: Regression and Deep Q-Learning for Intelligent UAV Cellular User to Base Station Association

Unmanned Aerial Vehicles (UAVs) are emerging as important users of next-generation cellular networks. By operating in the sky, UAV users experience very different radio conditions than terrestrial users, due to factors such as strong Line-of-Sight (LoS) channels (and interference) and Base Station (BS) antenna misalignment. As a consequence, the UAVs may experience significant degradation to their received quality of service, particularly when they are moving and are subject to frequent handovers. The solution is to allow the UAV to be aware of its surrounding environment, and intelligently connect into the cellular network taking advantage of this awareness. In this paper we present REgression and deep Q-learning for Intelligent UAV cellular user to Base station Association (REQIBA), a solution that allows a UAV flying over an urban area to intelligently connect to underlying BSs, using information about the received signal powers, the BS locations, and the surrounding building topology. We demonstrate how REQIBA can as much as double the total UAV throughput, when compared to heuristic association schemes similar to those commonly used by terrestrial users. We also evaluate how environmental factors such as UAV height, building density, and throughput loss due to handovers impact the performance of our solution.

cs.IT↗

arXiv2021

Energy Aware Deep Reinforcement Learning Scheduling for Sensors Correlated in Time and Space

Millions of battery-powered sensors deployed for monitoring purposes in a multitude of scenarios, e.g., agriculture, smart cities, industry, etc., require energy-efficient solutions to prolong their lifetime. When these sensors observe a phenomenon distributed in space and evolving in time, it is expected that collected observations will be correlated in time and space. In this paper, we propose a Deep Reinforcement Learning (DRL) based scheduling mechanism capable of taking advantage of correlated information. We design our solution using the Deep Deterministic Policy Gradient (DDPG) algorithm. The proposed mechanism is capable of determining the frequency with which sensors should transmit their updates, to ensure accurate collection of observations, while simultaneously considering the energy available. To evaluate our scheduling mechanism, we use multiple datasets containing environmental observations obtained in multiple real deployments. The real observations enable us to model the environment with which the mechanism interacts as realistically as possible. We show that our solution can significantly extend the sensors' lifetime. We compare our mechanism to an idealized, all-knowing scheduler to demonstrate that its performance is near-optimal. Additionally, we highlight the unique feature of our design, energy-awareness, by displaying the impact of sensors' energy levels on the frequency of updates.

cs.LG↗

arXiv2021

Mobility for Cellular-Connected UAVs: challenges for the network provider

Unmanned Aerial Vehicle (UAV) technology is becoming more prevalent and more diverse in its application. 5G and beyond networks must enable UAV connectivity. This will require the network operator to consider this new type of user in the planning and operation of the network. This work presents the challenges an operator will encounter and should consider in the future as UAVs become users of the network. We analyse the 3GPP specifications, the existing research literature, and a publicly available UAV connectivity dataset, to describe the challenges. We classify these challenges into network planning and network optimisation categories. We discuss the challenge of planning network coverage when considering coverage for flying users and the PCI collision and confusion issues that can be aggravated by these users. In discussing network optimisation challenges, we introduce Automatic Neighbouring Relation (ANR) and handover challenges, specifically the number of neighbours in the Neighbour Relation Table (NRT), and their potential deletion and block-listing, the frequent number of handovers and the possibility that the UAV disconnects because of handover issues. We discuss possible approaches to address the presented challenges and use a real-world dataset to support our findings about these challenges and their importance.

cs.NI↗

arXiv2020

Intelligent Base Station Association for UAV Cellular Users: A Supervised Learning Approach

Fifth Generation (5G) cellular networks are expected to provide cellular connectivity for vehicular users, including Unmanned Aerial Vehicles (UAVs). When flying in the air, these users experience strong, unobstructed channel conditions to a large number of Base Stations (BSs) on the ground. This creates very strong interference conditions for the UAV users, while at the same time offering them a large number of BSs to potentially associate with for cellular service. Therefore, to maximise the performance of the UAV-BS wireless link, the UAV user needs to be able to choose which BSs to connect to, based on the observed environmental conditions. This paper proposes a supervised learning-based association scheme, using which a UAV can intelligently associate with the most appropriate BS. We train a Neural Network (NN) to identify the most suitable BS from several candidate BSs, based on the received signal powers from the BSs, known distances to the BSs, as well as the known locations of potential interferers. We then compare the performance of the NN-based association scheme against strongest-signal and closest-neighbour association schemes, and demonstrate that the NN scheme significantly outperforms the simple heuristic schemes.

cs.IT↗

arXiv2020

Radio Access Technology Characterisation Through Object Detection

\ac{RAT} classification and monitoring are essential for efficient coexistence of different communication systems in shared spectrum. Shared spectrum, including operation in license-exempt bands, is envisioned in the \ac{5G} standards (e.g., 3GPP Rel. 16). In this paper, we propose a \ac{ML} approach to characterise the spectrum utilisation and facilitate the dynamic access to it. Recent advances in \acp{CNN} enable us to perform waveform classification by processing spectrograms as images. In contrast to other \ac{ML} methods that can only provide the class of the monitored \acp{RAT}, the solution we propose can recognise not only different \acp{RAT} in shared spectrum, but also identify critical parameters such as inter-frame duration, frame duration, centre frequency, and signal bandwidth by using object detection and a feature extraction module to extract features from spectrograms. We have implemented and evaluated our solution using a dataset of commercial transmissions, as well as in a \ac{SDR} testbed environment. The scenario evaluated was the coexistence of WiFi and LTE transmissions in shared spectrum. Our results show that our approach has an accuracy of 96\% in the classification of \acp{RAT} from a dataset that captures transmissions of regular user communications. It also shows that the extracted features can be precise within a margin of 2\%, %of the size of the image, and is capable of detect above 94\% of objects under a broad range of transmission power levels and interference conditions.

eess.SP↗

arXiv2020

Indoor Millimeter-Wave Systems: Design and Performance Evaluation

Indoor areas, such as offices and shopping malls, are a natural environment for initial millimeter-wave (mmWave) deployments. While we already have the technology that enables us to realize indoor mmWave deployments, there are many remaining challenges associated with system-level design and planning for such. The objective of this article is to bring together multiple strands of research to provide a comprehensive and integrated framework for the design and performance evaluation of indoor mmWave systems. The paper introduces the framework with a status update on mmWave technology, including ongoing fifth generation (5G) wireless standardization efforts, and then moves on to experimentally-validated channel models that inform performance evaluation and deployment planning. Together these yield insights on indoor mmWave deployment strategies and system configurations, from feasible deployment densities to beam management strategies and necessary capacity extensions.

cs.NI↗

arXiv2020

Mandate-driven Networking Eco-system: A Paradigm Shift in End-to-End Communications

The wireless industry is driven by key stakeholders that follow a holistic approach of "one-system-fits-all" that leads to moving network functionality of meeting stringent E2E communication requirements towards the core and cloud infrastructures. This trend is limiting smaller and new players for bringing in new and novel solutions. For meeting these E2E requirements, tenants and end-users need to be active players for bringing their needs and innovations. Driving E2E communication not only in terms of QoS but also overall carbon footprint and spectrum efficiency from one specific community may lead to undesirable simplifications and a higher level of abstraction of other network segments may lead to sub-optimal operations. Based on this, the paper presents a paradigm shift that will enlarge the role of wireless innovation at academia, SME's, industries and start-ups while taking into account decentralized mandate-driven intelligence in E2E communications

cs.NI↗

arXiv2019

LTE Standard-Compliant D2D Communication: Software-defined Radio Implementation and Evaluation

In this paper, we describe the design and implementation of D2D communication functionality for LTE. To our knowledge, this is the first such implementation that is compliant with the LTE Release 12 standard. In this paper, we design and demonstrate an experiment on mode selection between infrastructure mode and D2D communication mode in LTE networks. We implement our system on a software-defined radio SDR testbed, augmenting the open-source LTE eNodeB and UE implementation provided by the srsLTE software suite. Our measurements demonstrate the cell extension capabilities of D2D and quantify the SNR and throughput obtained by a subscriber when directly served by the eNodeB and when provided connectivity through the relay UE. Our implementation of sidelink, relaying, and mode selection functionality enables experimentation and prototyping of D2D communication that can assist in standardization, research, and development.

cs.NI↗

arXiv2019

Using Deep Q-learning To Prolong the Lifetime of Correlated Internet of Things Devices

Battery-powered sensors deployed in the Internet of Things (IoT) require energy-efficient solutions to prolong their lifetime. When these sensors observe a physical phenomenon distributed in space and evolving in time, the collected observations are expected to be correlated. We take advantage of the exhibited correlation and propose an updating mechanism that employs deep Q-learning. Our mechanism is capable of determining the frequency with which sensors should transmit their updates while taking into the consideration an ever-changing environment. We evaluate our solution using observations obtained in a real deployment, and show that our proposed mechanism is capable of significantly extending battery-powered sensors' lifetime without compromising the accuracy of the observations provided to the IoT service.

cs.NI↗

arXiv2018

UAVs as Mobile Infrastructure: Addressing Battery Lifetime

Unmanned aerial vehicles (UAVs) are expected to play an important role in next generation cellular networks, acting as flying infrastructure which can serve ground users when regular infrastructure is overloaded or unavailable. As these devices are expected to operate wirelessly they will rely on an internal battery for their power supply, which will limit the amount of time they can operate over an area of interest before having to recharge. In this article, we outline three battery charging options that may be considered by a network operator and use simulations to demonstrate the performance impact of incorporating those options into a cellular network where UAV infrastructure provides wireless service.

cs.NI↗