arXiv subjects

Lukas Barth

Publications and source records attributed to Lukas Barth.

10 recordsLinked to original sources

arXiv2021

A Topology-Shape-Metrics Framework for Ortho-Radial Graph Drawing

Orthogonal drawings, i.e., embeddings of graphs into grids, are a classic topic in Graph Drawing. Often the goal is to find a drawing that minimizes the number of bends on the edges. A key ingredient for bend minimization algorithms is the existence of an orthogonal representation that describes such drawings combinatorially by only listing the angles between the edges around each vertex and the directions of bends on the edges, but neglecting any kind of geometric information such as vertex coordinates or edge lengths. We generalize this idea to ortho-radial representations of ortho-radial drawings, which are embeddings into an ortho-radial grid, whose gridlines are concentric circles around the origin and straight-line spokes emanating from the origin but excluding the origin itself. Unlike the orthogonal case, there exist ortho-radial representations that do not admit a corresponding drawing, for example so-called strictly monotone cycles. An ortho-radial drawing is called valid if it does not contain a strictly monotone cycle. Our first result is that an ortho-radial representation admits a corresponding drawing if and only if it is valid. Previously such a characterization was only known for ortho-radial drawings of paths, cycles, and theta graphs, and in the special case of rectangular drawings of cubic graphs, where the contour of each face is required to be a rectangle. Further, we give a quadratic-time algorithm that tests for an ortho-radial representation whether it is valid, and we show how to draw a valid ortho-radial representation in the same running time. Altogether, this reduces the problem of computing a minimum-bend ortho-radial drawing to the task of computing a valid ortho-radial representation with the minimum number of bends, and hence establishes an ortho-radial analogue of the topology-shape-metrics framework for planar orthogonal drawings by Tamassia.

cs.CG↗

arXiv2020

Zipping Segment Trees

Stabbing queries in sets of intervals are usually answered using segment trees. A dynamic variant of segment trees has been presented by van Kreveld and Overmars, which uses red-black trees to do rebalancing operations. This paper presents zipping segment trees - dynamic segment trees based on zip trees, which were recently introduced by Tarjan et al. To facilitate zipping segment trees, we show how to uphold certain segment tree properties during the operations of a zip tree. We present an in-depth experimental evaluation and comparison of dynamic segment trees based on red-black trees, weight-balanced trees and several variants of the novel zipping segment trees. Our results indicate that zipping segment trees perform better than rotation-based alternatives.

cs.DS↗

arXiv2019

Engineering Top-Down Weight-Balanced Trees

Weight-balanced trees are a popular form of self-balancing binary search trees. Their popularity is due to desirable guarantees, for example regarding the required work to balance annotated trees. While usual weight-balanced trees perform their balancing operations in a bottom-up fashion after a modification to the tree is completed, there exists a top-down variant which performs these balancing operations during descend. This variant has so far received only little attention. We provide an in-depth analysis and engineering of these top-down weight-balanced trees, demonstrating their superior performance. We also gaining insights into how the balancing parameters necessary for a weight-balanced tree should be chosen - with the surprising observation that it is often beneficial to choose parameters which are not feasible in the sense of the correctness proofs for the rebalancing algorithm.

cs.DS↗

arXiv2018

Multilevel Planarity

In this paper, we introduce and study the multilevel-planarity testing problem, which is a generalization of upward planarity and level planarity. Let $G = (V, E)$ be a directed graph and let $\ell: V \to \mathcal P(\mathbb Z)$ be a function that assigns a finite set of integers to each vertex. A multilevel-planar drawing of $G$ is a planar drawing of $G$ such that the $y$-coordinate of each vertex $v \in V$ is $y(v) \in \ell(v)$, and each edge is drawn as a strictly $y$-monotone curve. We present linear-time algorithms for testing multilevel planarity of embedded graphs with a single source and of oriented cycles. Complementing these algorithmic results, we show that multilevel-planarity testing is NP-complete even in very restricted cases.

cs.DS↗

arXiv2017

Towards a Topology-Shape-Metrics Framework for Ortho-Radial Drawings

Ortho-Radial drawings are a generalization of orthogonal drawings to grids that are formed by concentric circles and straight-line spokes emanating from the circles' center. Such drawings have applications in schematic graph layouts, e.g., for metro maps and destination maps. A plane graph is a planar graph with a fixed planar embedding. We give a combinatorial characterization of the plane graphs that admit a planar ortho-radial drawing without bends. Previously, such a characterization was only known for paths, cycles, and theta graphs, and in the special case of rectangular drawings for cubic graphs, where the contour of each face is required to be a rectangle. The characterization is expressed in terms of an ortho-radial representation that, similar to Tamassia's orthogonal representations for orthogonal drawings describes such a drawing combinatorially in terms of angles around vertices and bends on the edges. In this sense our characterization can be seen as a first step towards generalizing the Topology-Shape-Metrics framework of Tamassia to ortho-radial drawings.

cs.DM↗

arXiv2016

Temporal Map Labeling: A New Unified Framework with Experiments

The increased availability of interactive maps on the Internet and on personal mobile devices has created new challenges in computational cartography and, in particular, for label placement in maps. Operations like rotation, zoom, and translation dynamically change the map over time and make a consistent adaptation of the map labeling necessary. In this paper, we consider map labeling for the case that a map undergoes a sequence of operations over a specified time span. We unify and generalize several preceding models for dynamic map labeling into one versatile and flexible model. In contrast to previous research, we completely abstract from the particular operations (e.g., zoom, rotation, etc.) and express the labeling problem as a set of time intervals representing the labels' presences, activities, and conflicts. The model's strength is manifested in its simplicity and broad range of applications. In particular, it supports label selection both for map features with fixed position as well as for moving entities (e.g., for tracking vehicles in logistics or air traffic control). Through extensive experiments on OpenStreetMap data, we evaluate our model using algorithms of varying complexity as a case study for navigation systems. Our experiments show that even simple (and thus, fast) algorithms achieve near-optimal solutions in our model with respect to an intuitive objective function.

cs.CG↗

arXiv2015

Nonadditivity of Critical Casimir Forces

In soft and condensed matter physics, effective interactions often emerge as a result of the spatial confinement of a fluctuating field. For instance, microscopic particles in a binary liquid mixture are subject to critical Casimir forces whenever their surfaces confine the thermal fluctuations of the order parameter of this kind of solvent, the range of which diverges upon approaching the critical demixing point. Critical Casimir forces are predicted to be nonadditive on a particular large scale. However, a direct experimental evidence of this fact is still lacking. Here, we fill in this gap by reporting the experimental measurement of the associated many-body effects. In particular, we focus on three colloidal particles in optical traps and observe that the critical Casimir force exerted on one of them by the other two colloids differs from the sum of the forces they exert separately. The magnitude and range of this three-body effect turn out to depend sensitively on the distance from the critical point of the solvent and on the preferential adsorption at the surfaces of the colloids for the two components of the mixture.

cond-mat.soft↗

arXiv2015

On the Readability of Boundary Labeling

Boundary labeling deals with annotating features in images such that labels are placed outside of the image and are connected by curves (so-called leaders) to the corresponding features. While boundary labeling has been extensively investigated from an algorithmic perspective, the research on its readability has been neglected. In this paper we present the first formal user study on the readability of boundary labeling. We consider the four most studied leader types with respect to their performance, i.e., whether and how fast a viewer can assign a feature to its label and vice versa. We give a detailed analysis of the results regarding the readability of the four models and discuss their aesthetic qualities based on the users' preference judgments and interviews.

cs.CG↗

arXiv2013

Semantic Word Cloud Representations: Hardness and Approximation Algorithms

We study a geometric representation problem, where we are given a set $\cal R$ of axis-aligned rectangles with fixed dimensions and a graph with vertex set $\cal R$. The task is to place the rectangles without overlap such that two rectangles touch if and only if the graph contains an edge between them. We call this problem Contact Representation of Word Networks (CROWN). It formalizes the geometric problem behind drawing word clouds in which semantically related words are close to each other. Here, we represent words by rectangles and semantic relationships by edges. We show that CROWN is strongly NP-hard even restricted trees and weakly NP-hard if restricted stars. We consider the optimization problem Max-CROWN where each adjacency induces a certain profit and the task is to maximize the sum of the profits. For this problem, we present constant-factor approximations for several graph classes, namely stars, trees, planar graphs, and graphs of bounded degree. Finally, we evaluate the algorithms experimentally and show that our best method improves upon the best existing heuristic by 45%.

cs.CG↗

arXiv2013

On Semantic Word Cloud Representation

We study the problem of computing semantic-preserving word clouds in which semantically related words are close to each other. While several heuristic approaches have been described in the literature, we formalize the underlying geometric algorithm problem: Word Rectangle Adjacency Contact (WRAC). In this model each word is associated with rectangle with fixed dimensions, and the goal is to represent semantically related words by ensuring that the two corresponding rectangles touch. We design and analyze efficient polynomial-time algorithms for some variants of the WRAC problem, show that several general variants are NP-hard, and describe a number of approximation algorithms. Finally, we experimentally demonstrate that our theoretically-sound algorithms outperform the early heuristics.

cs.DS↗