arXiv subjects

Lukas Conrads

Publications and source records attributed to Lukas Conrads.

8 recordsLinked to original sources

arXiv2026

Understanding inhomogeneous crystallization dynamics of phase-change materials in the vicinity of metallic nanoantennas

Optical metasurfaces composed of metallic or dielectric scatterers (meta-atoms) promise a powerful way of tailoring light-matter interactions. Phase-change materials (PCMs) are prime candidates for non-volatile resonance tuning of metasurfaces based on a refractive index change. Precise resonance control can be achieved by locally applying laser pulses to crystallize a PCM, modifying the dielectric surrounding of meta-atoms. However, the complex crystallization kinetics of PCMs in the vicinity of metallic meta-atoms have not been studied yet. Here, we experimentally investigate metallic dimer antennas on top of the PCM Ge3Sb2Te6 and address these nanoantennas with laser pulses. Our study reveals inhomogeneous crystallization caused by the absorption and heat conduction of the metallic nanoantennas. A self-consistent multiphysics model, including electromagnetic, thermal, and phase-transition processes, is employed to simulate the crystallization and understand the resulting resonance shift of the antennas. This model enables the optimization of the laser parameters and the geometry of the meta-atoms to achieve an optimal crystallization pattern and resonance shift. Our work paves the way towards complex antenna geometries optimized for local addressing of PCMs to achieve sophisticated crystallization patterns, enabling on-demand programming of individual nanoantennas within metasurfaces.

physics.optics↗

arXiv2026

Fast Programming of In-Plane Hyperbolic Phonon Polariton Optics Through van der Waals Crystals using the Phase-Change Material In3SbTe2

The high directionality of hyperbolic phonon polaritons (HPhPs) has opened radically new ways to route and steer the flow of energy at the nanoscale. However, launching HPhPs requires fabricating efficient and precisely aligned polariton launching structures, which remains time-consuming and expensive with conventional nanofabrication approaches. Recently, using optical laser pulses, polariton launching structures have been programmed into the plasmonic phase-change material In3SbTe2. Here, we leverage this approach to reconfigure HPhPs by programming a variety of launching and confining nanostructures through α-MoO3 flakes deposited onto In3SbTe2. Importantly, optical programming after flake deposition enables alignment of launching stripes to the [001]-axis of the flake, essential to control the directional polariton propagation. We showcase these capabilities in a variety of structures: i) an optically programmed disk, showing similar tuning ranges and confinement as focusing by gold disks; and ii) a cavity for in-plane HPhPs created by reconfiguring the single disk to a double disk structure, tailoring the confinement by simply reprogramming the disk distance. Our fabrication scheme offers fast turn-around times, flexible alignment and the opportunity to reconfigure the structures. Thus, it is a fast, efficient and versatile way to tailor propagation and confinement of highly directional polaritons on demand.

physics.optics↗

arXiv2025

Tailoring hBN's Phonon Polaritons with the Plasmonic Phase-Change Material In3SbTe2

Polaritons in van-der-Waals materials (vdWM) promise high confinement and multiple tailoring options by optical structures, e.g., resonators, launching structures and lenses. These optical structures are conventionally fabricated using cumbersome multi-process lithography techniques. In contrast, phase-change materials (PCMs) offer fast and reconfigurable programming of optical structures. PCMs can reversibly be switched between two stable phases with distinct permittivities by local heating, e.g., by optical laser pulses. While the well-known dielectric PCM GeSbTe-alloys feature only a permittivity change, the PCM In3SbTe2 can be switched between a dielectric and metallic phase. This makes In3SbTe2 promising for programming metallic launching structures. Here, we demonstrate direct optical programming and thereby rapid prototyping of optical launching structures in In3SbTe2 to tailor and confine polaritons in vdWM. We combine the vdWM hexagonal boron nitride (hBN) with In3SbTe2 and optically program circular resonators for hBN's phonon polaritons through hBN into In3SbTe2. We investigate the polariton resonators with near-field optical microscopy. Demonstrating the reconfigurability, we decrease the resonator diameter to increase the polariton confinement. Finally, we fabricate focusing structures for hBN's phonon polaritons whose focal point is changed in a second post-processing step. We promote In3SbTe2 as a versatile platform for rapid prototyping of polariton optics in vdWM.

physics.optics↗

arXiv2024

Infrared Beam-shaping on Demand via Tailored Geometric Phase Metasurfaces employing the Plasmonic Phase-Change Material In3SbTe2

Conventional optical elements are bulky and limited to specific functionalities, contradicting the increasing demand of miniaturization and multi-functionalities. Optical metasurfaces enable tailoring light-matter interaction at will, especially important for the infrared spectral range which lacks commercially available beam-shaping elements. While the fabrication of those metasurfaces usually requires cumbersome techniques, direct laser writing promises a simple and convenient alternative. Here, we exploit the non-volatile laser-induced insulator-to-metal transition of the plasmonic phase-change material In3SbTe2 (IST) for optical programming of large-area metasurfaces for infrared beam-shaping. We tailor the geometric phase of metasurfaces with rotated crystalline IST rod antennas to achieve beam steering, lensing, and beams carrying orbital angular momenta. Finally, we investigate multi-functional and cascaded metasurfaces exploiting enlarged holography, and design a single metasurface creating two different holograms along the optical axis. Our approach facilitates fabrication of large-area metasurfaces within hours, enabling rapid-prototyping of customized infrared meta-optics for sensing, imaging and quantum information.

physics.optics↗

arXiv2024

Super-resolution imaging of nanoscale inhomogeneities in hBN-covered and encapsulated few-layer graphene

Encapsulating few-layer graphene (FLG) in hexagonal boron nitride (hBN) can cause nanoscale inhomogeneities in the FLG, including changes in stacking domains and topographic defects. Due to the diffraction limit, characterizing these inhomogeneities is challenging. Recently, the visualization of stacking domains in encapsulated four-layer graphene (4LG) has been demonstrated with phonon polariton (PhP)-assisted near-field imaging. However, the underlying coupling mechanism and ability to image subdiffractional-sized inhomogeneities remain unknown. Here, we retrieve direct replicas and magnified images of subdiffractional-sized inhomogeneities in hBN-covered trilayer graphene (TLG) and encapsulated 4LG, enabled by the hyperlensing effect. This hyperlensing effect is mediated by hBN's hyperbolic PhP that couple to the FLG's plasmon polaritons. Using near-field microscopy, we identify the coupling by determining the polariton dispersion in hBN-covered TLG to be stacking-dependent. Our work demonstrates super-resolution and magnified imaging of inhomogeneities, paving the way for the realization of homogeneous encapsulated FLG transport samples to study correlated physics.

physics.optics↗

arXiv2023

Direct programming of confined Surface Phonon Polariton Resonators using the plasmonic Phase-Change Material In$_3$SbTe$_2$

Tailoring light-matter interaction is essential to realize nanophotonic components. It can be achieved with surface phonon polaritons (SPhPs), an excitation of photons coupled with phonons of polar crystals, which also occur in 2d materials such as hexagonal boron nitride or anisotropic crystals. Ultra-confined resonances are observed by restricting the SPhPs to cavities. Phase-change materials (PCMs) enable non-volatile programming of these cavities based on a change in the refractive index. Recently, the new plasmonic PCM In$_3$SbTe$_2$ (IST) was introduced which can be reversibly switched from an amorphous dielectric state to a crystalline metallic one in the entire infrared to realize numerous nanoantenna geometries. However, reconfiguring SPhP resonators to modify the confined polaritons modes remains elusive. Here, we demonstrate direct programming of confined SPhP resonators by phase-switching IST on top of a polar silicon carbide crystal and investigate the strongly confined resonance modes with scanning near-field optical microscopy. Reconfiguring the size of the resonators themselves result in enhanced mode confinements up to a value of $λ/35$. Finally, unconventional cavity shapes with complex field patterns are explored as well. This study is a first step towards rapid prototyping of reconfigurable SPhP resonators that can be easily transferred to hyperbolic and anisotropic 2d materials.

physics.optics↗

arXiv2023

Hidden Schema Networks

Large, pretrained language models infer powerful representations that encode rich semantic and syntactic content, albeit implicitly. In this work we introduce a novel neural language model that enforces, via inductive biases, explicit relational structures which allow for compositionality onto the output representations of pretrained language models. Specifically, the model encodes sentences into sequences of symbols (composed representations), which correspond to the nodes visited by biased random walkers on a global latent graph, and infers the posterior distribution of the latter. We first demonstrate that the model is able to uncover ground-truth graphs from artificially generated datasets of random token sequences. Next, we leverage pretrained BERT and GPT-2 language models as encoder and decoder, respectively, to infer networks of symbols (schemata) from natural language datasets. Our experiments show that (i) the inferred symbols can be interpreted as encoding different aspects of language, as e.g. topics or sentiments, and that (ii) GPT-like models can effectively be conditioned on symbolic representations. Finally, we explore training autoregressive, random walk ``reasoning" models on schema networks inferred from commonsense knowledge databases, and using the sampled paths to enhance the performance of pretrained language models on commonsense If-Then reasoning tasks.

cs.CL↗

arXiv2022

Experimental observation of ABCB stacked tetralayer graphene

In tetralayer graphene, three inequivalent layer stackings should exist, however, only rhombohedral (ABCA) and Bernal (ABAB) stacking have so far been observed. The three stacking sequences differ in their electronic structure, with the elusive third stacking (ABCB) being unique as it is predicted to exhibit an intrinsic bandgap as well as locally flat bands around the K points. Here, we use scattering-type scanning near-field optical microscopy and confocal Raman microscopy to identify and characterize domains of ABCB stacked tetralayer graphene. We differentiate between the three stacking sequences by addressing characteristic interband contributions in the optical conductivity between 0.28 and 0.56 eV with amplitude and phase-resolved near-field nano-spectroscopy. By normalizing adjacent flakes to each other, we achieve good agreement between theory and experiment, allowing for the unambiguous assignment of ABCB domains in tetralayer graphene. These results establish near-field spectroscopy at the interband transitions as a semi-quantitative tool, enabling the recognition of ABCB domains in tetralyer graphene flakes and therefore, providing a basis to study correlation physics of this exciting phase.

cond-mat.mes-hall↗