arXiv subjects

Lukas Jelinek

Publications and source records attributed to Lukas Jelinek.

51 records · Page 3Linked to original sources

arXiv2018

Accurate and Efficient Evaluation of Characteristic Modes

A new method to improve the accuracy and efficiency of characteristic mode (CM) decomposition for perfectly conducting bodies is presented. The method uses the expansion of the Green dyadic in spherical vector waves. This expansion is utilized in the method of moments (MoM) solution of the electric field integral equation to factorize the real part of the impedance matrix. The factorization is then employed in the computation of CMs, which improves the accuracy as well as the computational speed. An additional benefit is a rapid computation of far fields. The method can easily be integrated into existing MoM solvers. Several structures are investigated illustrating the improved accuracy and performance of the new method.

physics.comp-ph↗

arXiv2018

Dissipation Factors of Spherical Current Modes on Multiple Spherical Layers

Radiation efficiencies of modal current densities distributed on a spherical shell are evaluated in terms of dissipation factor. The presented approach is rigorous, yet simple and straightforward, leading to closed-form expressions. The same approach is utilized for a two-layered shell and the results are compared with other models existing in the literature. Discrepancies in this comparison are reported and reasons are analyzed. Finally, it is demonstrated that radiation efficiency potentially benefits from the use of internal volume which contrasts with the case of the radiation Q-factor.

physics.class-ph↗

arXiv2017

Validating the Characteristic Modes Solvers

Characteristic modes of a spherical shell are found analytically as spherical harmonics normalized to radiate unitary power and to fulfill specific boundary conditions. The presented closed-form formulas lead to a proposal of precise synthetic benchmarks which can be utilized to validate the method of moments matrix or performance of characteristic mode decomposition. Dependence on the mesh size, electrical size and other parameters can systematically be studied, including the performance of various mode tracking algorithms. A noticeable advantage is the independence on feeding models. Both theoretical and numerical aspects of characteristic mode decomposition are discussed and illustrated by examples. The performance of state-of-the-art commercial simulators and academic packages having been investigated, we can conclude that all contemporary implementations are capable of identifying the first dominant modes while having severe difficulties with higher-order modes. Surprisingly poor performance of the tracking routines is observed notwithstanding the recent ambitious development.

physics.comp-ph↗

arXiv2016

Optimal Composition of Modal Currents For Minimal Quality Factor Q

This work describes a powerful, yet simple, procedure how to acquire a current approaching the lower bound of quality factor Q. This optimal current can be determined for an arbitrarily shaped electrically small radiator made of a perfect conductor. Quality factor Q is evaluated by Vandenbosch's relations yielding stored electromagnetic energy as a function of the source current density. All calculations are based on a matrix representation of the integro-differential operators. This approach simplifies the entire development and results in a straightforward numerical evaluation. The optimal current is represented in a basis of modal currents suitable for solving the optimization problem so that the minimum is approached by either one mode tuned to the resonance, or, by two properly combined modes. An overview of which modes should be selected and how they should be combined is provided and results concerning rectangular plate, spherical shell and fractal shapes of varying geometrical complexity are presented. The reduction of quality factor Q and the G/Q ratio are studied and, thanks to the modal decomposition, the physical interpretation of the results is discussed in conjunction with the limitations of the proposed procedure.

physics.optics↗

arXiv2015

Various Interpretations of the Stored and the Radiated Energy Density

Three contradictory but state-of-the-art concepts for defining and evaluating stored electromagnetic energy are treated in this communication, and are collated with the widely accepted definition of stored energy, which is the total energy minus the radiated energy. All three concepts are compared, and the results are discussed on an example of a dominant spherical mode, which is known to yield dissimilar results for the concepts dealt with here. It is shown that various definitions of stored energy density immanently imply diverse meanings of the term "radiation".

physics.class-ph↗

arXiv2015

Stored Electromagnetic Energy and Quality Factor of Radiating Structures

This paper deals with the old yet unsolved problem of defining and evaluating the stored electromagnetic energy - a quantity essential for calculating the quality factor, which reflects the intrinsic bandwidth of the considered electromagnetic system. A novel paradigm is proposed to determine the stored energy in the time domain leading to the method, which exhibits positive semi-definiteness and coordinate independence, i.e. two key properties actually not met by the contemporary approaches. The proposed technique is compared with two up-to-date frequency domain methods that are extensively used in practice. All three concepts are discussed and compared on the basis of examples of varying complexity, starting with lumped RLC circuits and finishing with realistic radiators.

physics.class-ph↗

arXiv2015

Comments on "On Stored Energies and Radiation Q"

The commented paper claims to provide a new expression for an energy stored around a general radiator. The major purpose of this comment is to show that the claim is unjustified. Alongside with this issue, it is pointed out that some of the core formulas of the commented paper are not completely correct, and that their correct form has in fact been derived elsewhere, though for the purpose of evaluating the quality factor QZ and not the stored energies.

physics.class-ph↗

arXiv2015

Embedded Energy State in an Open Semiconductor Heterostructure

In this paper, we show that HgCdTe heterostructures may support bound electronic states embedded in the continuum, such that the discrete energy spectrum overlaps the continuous spectrum. Although the proposed heterostructures are generally penetrable by an incoming electron wave, it is shown that they may support spatially localized trapped stationary states with an infinite lifetime. We discuss the possibility of a free electron being captured by the proposed open resonator, and present a detailed study of the trapping lifetime in the case of a detuned resonator.

cond-mat.mes-hall↗

arXiv2014

On the Functional Relation Between Quality Factor and Fractional Bandwidth

The functional relation between the fractional band-width and the quality factor of a radiating system is investigated in this note. Several widely used definitions of the quality factor are compared on two examples of RLC circuits that serve as a simplified model of a single resonant antenna tuned to its resonance. It is demonstrated that for a first-order system, only the quality factor based on differentiation of input impedance has unique proportionality to the fractional bandwidth, whereas e.g. the classical definition of the quality factor, i. e. the ratio of the stored energy to the lost energy per one cycle, is not uniquely proportional to the fractional bandwidth. In addition, it is shown that for higher-order systems the quality factor based on differentiation of the input impedance ceases to be uniquely related to the fractional bandwidth.

physics.class-ph↗

arXiv2012

Coupled-wave surface-impedance analysis of extraordinary transmission through single and stacked metallic screens

In this paper we present an efficient Coupled-wave surface-impedance method for the analysis of extraordinary optical transmission (EOT) through single and stacked realistic metallic screens under normal and oblique incidence, including possible dielectric interlayers. The proposed theory is valid for the complete frequency range where EOT has been reported, including microwaves and optics. Electromagnetic simulations validate the results of the model, which allows for a fast and accurate characterization of the analyzed structures.

physics.optics↗

arXiv2011

An FET-Based Unit Cell for an Active Magnetic Metamaterial

A particle that can be used to create an active magnetic metamaterial has been designed using an FET transistor loaded in its gate by a conducting ring and in its source by a parallel resonance circuit. The design procedure is discussed and the working principle is experimentally demonstrated in the RF range.

cond-mat.mtrl-sci↗

arXiv2010

Extraordinary transmission induced by defects in semitransparent screens

In this letter we present an analytical theory of Extraordinary optical transmission (EOT) through semi-transparent screens, such as thin metallic plates or high permittivity dielectric slabs. Using this theory we show that EOT appears not only for screens perforated by holes or slits, but also for screens loaded by any defects, including opaque defects. These results widen the scope of EOT concept, opening up the way to the study of new physical effects.

physics.optics↗

arXiv2009

On the applications of mu=-1 metamaterial lenses for magnetic resonance imaging

In this work some possible applications of negative permeability magnetic metamaterial lenses for magnetic resonance imaging (MRI) are analyzed. Metamaterials are artificial composites designed to have a given permittivity and/or permeability, including negative values for these constants. It is shown that using magnetic metamaterials lenses it is possible to manipulate the spatial distribution of the radio-frequency (RF) field used in MR systems and, under some circumstances, improve the sensitivity of surface coils. Furthermore a collimation of the RF field, phenomenon that may find application in parallel imaging, is presented. MR images of real tissues are shown in order to prove the suitability of the theoretical analysis for practical applications.

physics.med-ph↗

arXiv2009

Metamaterial radiofrequency lens for magnetic resonance imaging

The purpose of this work is to test the ability of a new class of passive electromagnetic device to increase the penetration depth of phased arrays of surface coils for magnetic resonance (MR) imaging systems. This new device is based on the emerging technology of metamaterials and behaves like a lens for the radiofrequency magnetic fields. The presented device was tested in several 1.5-T MR systems from different companies in combination with different phased arrays. One of the authors was enrolled as volunteer for the experiments. In these experiments his knees were imaged by using a dual phased array. The device was placed between the knees to check that the penetration depth of the coils was improved by this passive device. In all the experiments the presented device was successfully tested and it was checked that the knees of the volunteer can be imaged at deeper distances and that the signal-to-noise-ratio (SNR) in the obtained MR images was improved by the presence of the lens. The presented device has proven to increase the penetration depth of MR phased arrays of surface coils. The lens was tested by means of the MR imaging of the knees but it can be used to image any pair of joints simultaneously by placing it between the joints. The positive results suggest the possibility of using the lens to image the female breast. This would make it possible to increase the SNR without higher fields, thus fulfilling the safety regulations governing the standard absorption rate (SAR).

physics.med-ph↗

arXiv2008

Experimental demonstration of a mu=-1 metamaterial lens for magnetic resonance imaging

In this work a mu=-1 metamaterial (MM) lens for magnetic resonance imaging (MRI) is demonstrated. MRI uses surface coils to detect the radiofrequency(RF) energy absorbed and emitted by the nuclear spins in the imaged object. The proposed MM lens manipulates the RF field detected by these surface coils, so that the coil sensitivity and spatial localization is substantially improved. Beyond this specific application, we feel that the reported results are the experimental confirmation of a new concept for the manipulation of RF field in MRI, which paves the way to many other interesting applications.

physics.med-ph↗