Searcharxiv⌕ Search

arXiv subjects

Luke C. G. Govia

Publications and source records attributed to Luke C. G. Govia.

36 records · Page 2Linked to original sources

Deep Neural Network Discrimination of Multiplexed Superconducting Qubit States

Demonstrating a quantum computational advantage will require high-fidelity control and readout of multi-qubit systems. As system size increases, multiplexed qubit readout becomes a practical necessity to limit the growth of resource overhead. Many contemporary qubit-state discriminators presume single-qubit operating conditions or require considerable computational effort, limiting their potential extensibility. Here, we present multi-qubit readout using neural networks as state discriminators. We compare our approach to contemporary methods employed on a quantum device with five superconducting qubits and frequency-multiplexed readout. We find that fully-connected feedforward neural networks increase the qubit-state-assignment fidelity for our system. Relative to contemporary discriminators, the assignment error rate is reduced by up to 25% due to the compensation of system-dependent nonidealities such as readout crosstalk which is reduced by up to one order of magnitude. Our work demonstrates a potentially extensible building block for high-fidelity readout relevant to both near-term devices and future fault-tolerant systems.

quant-ph↗

Characterizing mid-circuit measurements on a superconducting qubit using gate set tomography

Measurements that occur within the internal layers of a quantum circuit -- mid-circuit measurements -- are an important quantum computing primitive, most notably for quantum error correction. Mid-circuit measurements have both classical and quantum outputs, so they can be subject to error modes that do not exist for measurements that terminate quantum circuits. Here we show how to characterize mid-circuit measurements, modelled by quantum instruments, using a technique that we call quantum instrument linear gate set tomography (QILGST). We then apply this technique to characterize a dispersive measurement on a superconducting transmon qubit within a multiqubit system. By varying the delay time between the measurement pulse and subsequent gates, we explore the impact of residual cavity photon population on measurement error. QILGST can resolve different error modes and quantify the total error from a measurement; in our experiment, for delay times above 1000 ns we measured a total error rate (i.e., half diamond distance) of $ε_{\diamond} = 8.1 \pm 1.4 \%$, a readout fidelity of $97.0 \pm 0.3\%$, and output quantum state fidelities of $96.7 \pm 0.6\%$ and $93.7 \pm 0.7\%$ when measuring $0$ and $1$, respectively.

quant-ph↗

Reservoir Computing with Superconducting Electronics

The rapidity and low power consumption of superconducting electronics makes them an ideal substrate for physical reservoir computing, which commandeers the computational power inherent to the evolution of a dynamical system for the purposes of performing machine learning tasks. We focus on a subset of superconducting circuits that exhibit soliton-like dynamics in simple transmission line geometries. With numerical simulations we demonstrate the effectiveness of these circuits in performing higher-order parity calculations and channel equalization at rates approaching 100 Gb/s. The availability of a proven superconducting logic scheme considerably simplifies the path to a fully integrated reservoir computing platform and makes superconducting reservoirs an enticing substrate for high rate signal processing applications.

cond-mat.supr-con↗

Integration of spectator qubits into quantum computer architectures for hardware tuneup and calibration

Performing efficient quantum computer tuneup and calibration is essential for growth in system complexity. In this work we explore the link between facilitating such capabilities and the underlying architecture of the physical hardware. We focus on the specific challenge of measuring (``mapping'') spatially inhomogeneous quasi-static calibration errors using spectator qubits dedicated to the task of sensing and calibration. We introduce a novel architectural concept for such spectator qubits: arranging them spatially according to prescriptions from optimal 2D approximation theory. We show that this insight allows for efficient reconstruction of inhomogeneities in qubit calibration, focusing on the specific example of frequency errors which may arise from fabrication variances or ambient magnetic fields. Our results demonstrate that optimal interpolation techniques display near optimal error-scaling in cases where the measured characteristic (here the qubit frequency) varies smoothly, and we probe the limits of these benefits as a function of measurement uncertainty. For more complex spatial variations, we demonstrate that the NMQA formalism for adaptive measurement and noise filtering outperforms optimal interpolation techniques in isolation, and crucially, can be combined with insights from optimal interpolation theory to produce a general purpose protocol.

quant-ph↗

Quantum Simulation of a Discrete-Time Quantum Stochastic Walk

Quantum walks have been shown to have a wide range of applications, from artificial intelligence, to photosynthesis, and quantum transport. Quantum stochastic walks (QSWs) generalize this concept to additional non-unitary evolution. In this paper, we propose a trajectory-based quantum simulation protocol to effectively implement a family of discrete-time QSWs in a quantum device. After deriving the protocol for a 2-vertex graph with a single edge, we show how our protocol generalizes to a graph with arbitrary topology and connectivity. The straight-forward generalization leads to simple scaling of the protocol to complex graphs. Finally, we show how to simulate a restricted class of continuous-time QSWs by a discrete-time QSW, and how this is amenable to our simulation protocol for discrete-time QSWs.

quant-ph↗

Real-time decoding of stabilizer measurements in a bit-flip code

Although qubit coherence times and gate fidelities are continuously improving, logical encoding is essential to achieve fault tolerance in quantum computing. In most encoding schemes, correcting or tracking errors throughout the computation is necessary to implement a universal gate set without adding significant delays in the processor. Here we realize a classical control architecture for the fast extraction of errors based on multiple cycles of stabilizer measurements and subsequent correction. We demonstrate its application on a minimal bit-flip code with five transmon qubits, showing that real-time decoding and correction based on multiple stabilizers is superior in both speed and fidelity to repeated correction based on individual cycles. Furthermore, the encoded qubit can be rapidly measured, thus enabling conditional operations that rely on feed-forward, such as logical gates. This co-processing of classical and quantum information will be crucial in running a logical circuit at its full speed to outpace error accumulation.

quant-ph↗

Numerical finite-key analysis of quantum key distribution

Quantum key distribution (QKD) allows for secure communications safe against attacks by quantum computers. QKD protocols are performed by sending a sizeable, but finite, number of quantum signals between the distant parties involved. Many QKD experiments however predict their achievable key rates using asymptotic formulas, which assume the transmission of an infinite number of signals, partly because QKD proofs with finite transmissions (and finite key lengths) can be difficult. Here we develop a robust numerical approach for calculating the key rates for QKD protocols in the finite-key regime in terms of two novel semi-definite programs (SDPs). The first uses the relation between smooth min-entropy and quantum relative entropy, and the second uses the relation between the smooth min-entropy and quantum fidelity. We then solve these SDPs using convex optimization solvers and obtain some of the first numerical calculations of finite key rates for several different protocols, such as BB84, B92, and twin-field QKD. Our numerical approach democratizes the composable security proofs for QKD protocols where the derived keys can be used as an input to another cryptosystem.

quant-ph↗

Stroboscopic qubit measurement with squeezed illumination

Microwave squeezing represents the ultimate sensitivity frontier for superconducting qubit measurement. However, observation of enhancement has remained elusive, in part because integration with conventional dispersive readout pollutes the signal channel with antisqueezed vacuum. Here we induce a stroboscopic light-matter coupling with superior squeezing compatibility, and observe an increase in the room-temperature signal-to-noise ratio of 24%. Squeezing the orthogonal phase controls measurement backaction, slowing dephasing by a factor of 1.8. This protocol enables the practical use of microwave squeezing for qubit state measurement.

quant-ph↗

Quantitative tomography for continuous variable quantum systems

We present a continuous variable tomography scheme that reconstructs the Husimi Q-function (Wigner function) by Lagrange interpolation, using measurements of the Q-function (Wigner function) at the Padua points, the optimal sampling points for two dimensional reconstruction. Our approach drastically reduces the number of measurements required compared to using equidistant points on a regular grid, although reanalysis of such experiments is possible. The reconstruction algorithm produces a reconstructed function with exponentially decreasing error and quasi-linear runtime in the number of Padua points. Moreover, using the interpolating polynomial of the Q-function, we present a technique to directly estimate the density matrix elements of the continuous variable state, with only linear propagation of input measurement error. Furthermore, we derive a state-independent analytical bound on this error, such that our estimate of the density matrix is accompanied by a measure of its uncertainty.

quant-ph↗

Enhanced qubit readout using locally-generated squeezing and inbuilt Purcell-decay suppression

We introduce and analyze a dispersive qubit readout scheme where two-mode squeezing is generated directly in the measurement cavities. The resulting suppression of noise enables fast, high- fidelity readout of naturally weakly coupled qubits, and the possibility to protect strongly coupled qubits from decoherence by weakening their coupling. Unlike other approaches exploiting squeezing, our setup avoids the difficult task of transporting and injecting with high fidelity an externally-generated squeezed state. Our setup is also surprisingly robust against unwanted non-QND backaction effects, as interference naturally suppresses Purcell decay: the system acts as its own Purcell filter. Our setup is compatible with the experimental state-of-the-art in circuit QED systems, but the basic idea could also be realized in other systems.

quant-ph↗

Quantum Simulation of a Quantum Stochastic Walk

The study of quantum walks has been shown to have a wide range of applications in areas such as artificial intelligence, the study of biological processes, and quantum transport. The quantum stochastic walk, which allows for incoherent movement of the walker, and therefore, directionality, is a generalization on the fully coherent quantum walk. While a quantum stochastic walk can always be described in Lindblad formalism, this does not mean that it can be microscopically derived in the standard weak-coupling limit under the Born-Markov approximation. This restricts the class of quantum stochastic walks that can be experimentally realized in a simple manner. To circumvent this restriction, we introduce a technique to simulate open system evolution on a fully coherent quantum computer, using a quantum trajectories style approach. We apply this technique to a broad class of quantum stochastic walks, and show that they can be simulated with minimal experimental resources. Our work opens the path towards the experimental realization of quantum stochastic walks on large graphs with existing quantum technologies.

quant-ph↗

On the physical realizability of quantum stochastic walks

Quantum walks are a promising framework that can be used to both understand and implement quantum information processing tasks. The quantum stochastic walk is a recently developed framework that combines the concept of a quantum walk with that of a classical random walk, through open system evolution of a quantum system. Quantum stochastic walks have been shown to have applications in as far reaching fields as artificial intelligence. However, there are significant constraints on the kind of open system evolutions that can be realized in a physical experiment. In this work, we discuss the restrictions on the allowed open system evolution, and the physical assumptions underpinning them. We show that general implementations would require the complete solution of the underlying unitary dynamics, and sophisticated reservoir engineering, thus weakening the benefits of experimental investigations.

quant-ph↗

Coherent Feedback Improved Qubit Initialization in the Dispersive Regime

Readout of the state of a superconducting qubit by homodyne detection of the output signal from a dispersively coupled microwave resonator is a common technique in circuit quantum electrodynamics, and is often claimed to be quantum non-demolition (QND) up to the same order of approximation as in the dispersive approximation. However, in this work we show that only in the limit of infinite measurement time is this protocol QND, as the formation of a dressed coherent state in the qubit-cavity system applies an effective rotation to the qubit state. We show how this rotation can be corrected by a coherent operation, leading to improved qubit initialization by measurement and coherent feedback.

quant-ph↗

Entanglement Generated by the Dispersive Interaction: The Dressed Coherent State

In the dispersive regime of qubit-cavity coupling, classical cavity drive populates the cavity, but leaves the qubit state unaffected. However, the dispersive Hamiltonian is derived after both a frame transformation and an approximation. Therefore, to connect to external experimental devices, the inverse frame transformation from the dispersive frame back to the lab frame is necessary. In this work, we show that in the lab frame the system is best described by an entangled state known as the dressed coherent state, and thus even in the dispersive regime, entanglement is generated between the qubit and the cavity. Also, we show that further qubit evolution depends on both the amplitude and phase of the dressed coherent state, and use the dressed coherent state to calculate the measurement contrast of a recently developed dispersive readout protocol.

quant-ph↗

Scalable two- and four-qubit parity measurement with a threshold photon counter

Parity measurement is a central tool to many quantum information processing tasks. In this Letter, we propose a method to directly measure two- and four-qubit parity with low overhead in hard- and software, while remaining robust to experimental imperfections. Our scheme relies on dispersive qubit-cavity coupling and photon counting that is sensitive only to intensity; both ingredients are widely realized in many different quantum computing modalities. For a leading technology in quantum computing, superconducting integrated circuits, we analyze the measurement contrast and the back action of the scheme and show that this measurement comes close enough to an ideal parity measurement to be applicable to quantum error correction.

quant-ph↗

High-fidelity qubit measurement with a microwave photon counter

High-fidelity, efficient quantum nondemolition readout of quantum bits is integral to the goal of quantum computation. As superconducting circuits approach the requirements of scalable, universal fault tolerance, qubit readout must also meet the demand of simplicity to scale with growing system size. Here we propose a fast, high-fidelity, scalable measurement scheme based on the state-selective ring-up of a cavity followed by photodetection with the recently introduced Josephson photomultiplier (JPM), a current-biased Josephson junction. This scheme maps qubit state information to the binary digital output of the JPM, circumventing the need for room-temperature heterodyne detection and offering the possibility of a cryogenic interface to superconducting digital control circuitry. Numerics show that measurement contrast in excess of 95% is achievable in a measurement time of 140 ns. We discuss perspectives to scale this scheme to enable readout of multiple qubit channels with a single JPM.

quant-ph↗

Generating Nonclassical States from Classical Radiation by Subtraction Measurements

We describe the creation of nonclassical states of microwave radiation via ideal dichotomic single photon detection, i.e., a detector that only indicates presence or absence of photons. Ideally, such a detector has a back action in the form of the subtraction operator. Using the non-linearity of this back action, it is possible to create a large family of nonclassical states of microwave radiation, including squeezed and multi-component cat states, starting from a coherent state. We discuss the applicability of this protocol to current experimental designs of Josephson Photomultipliers (JPMs).

quant-ph↗

Theory of Josephson Photomultipliers: Optimal Working Conditions and Back Action

We describe the back action of microwave-photon detection via a Josephson photomultiplier (JPM), a superconducting qubit coupled strongly to a high-quality microwave cavity. The back action operator depends qualitatively on the duration of the measurement interval, resembling the regular photon annihilation operator at short interaction times and approaching a variant of the photon subtraction operator at long times. The optimal operating conditions of the JPM differ from those considered optimal for processing and storing of quantum information, in that a short $T_2$ of the JPM suppresses the cavity dephasing incurred during measurement. Understanding this back action opens the possibility to perform multiple JPM measurements on the same state, hence performing efficient state tomography.

quant-ph↗