arXiv subjects

Lute Maleki

Publications and source records attributed to Lute Maleki.

At least 19 recordsLinked to original sources

arXiv2026

Systematic Design and Demonstration of Multipole, Coupled-Cavity Integrated Photonic Bandpass Filters with High FSR, High-Q Single-Mode Microresonators in Low-Loss Silicon Nitride Platform

Tunable, low-loss, narrowband, and frequency-stabilized filters play a critical role in the realization of transceivers for efficient signal processing in telecommunications and sensing applications in the presence of strong interference and noise. We systematically design, fabricate, and demonstrate multi-cavity, multipole integrated photonic bandpass filters with gigahertz to sub-gigahertz bandwidths. The filters feature ultra-wideband tunable center frequencies exceeding 400 GHz, ultra-low insertion loss, steep roll-off, and compact footprints, making them suitable for radio-frequency, microwave, and millimeter-wave front-end applications. Using a set of design principles for multi-cavity high-order filters together with supporting nanofabrication techniques in a silicon nitride platform, the demonstrated filters achieve record-high figures of merit and advance the state of the art in integrated photonic filtering for radio-frequency, microwave, and millimeter-wave systems. The resonator structures, which are the key building blocks enabling the reported performance, combine a large free spectral range of approximately 70 GHz with a high quality factor of 2.1 times ten to the power of seven. This performance is enabled by combining wide multimode waveguide segments with narrow single-mode regions connected through adiabatic tapers. To the best of our knowledge, the experimentally demonstrated bandwidth of 520 MHz, tuning range of one free spectral range, filter insertion loss of 2 dB, and out-of-band rejection ratios of up to 55 dB represent record performance metrics for integrated photonic filtering of radio-frequency, millimeter-wave, and terahertz signals.

physics.optics↗

arXiv2025

Kerr nonlinearity, self-injection locking and correlation in a microresonator

Production of entangled photon pairs is important in secure communication systems, quantum computing, and fundamental physics experiments. Achieving efficient generation of such photon pairs with low-loss parametric oscillators is a key objective in advancing integrated quantum technologies. However, spatially separating the generated photons while preserving their entanglement represents a significant technical challenge. In this work, we demonstrate nonlinear generation of correlated optical harmonics based on non-degenerate four-wave mixing with an optimally pumped optical microcavity with Kerr nonlinearity. The phase matching of the process is achieved with self-injection locked lasers producing parametric oscillation while locked to two different modes of the microresonator. This condition is reminiscent of slow-light technique developed for coherent atomic systems. The experimental design, utilizing counterpropagating light from two self-injection locked lasers, also effectively addresses the challenge of spatial separation of the generated harmonics. We validate the theoretical predictions using two self-injection locked semiconductor lasers integrated with a crystalline whispering gallery mode resonator with optimized spectral structure.

physics.optics↗

arXiv2021

All-Optical Dissipative Discrete Time Crystals

Time crystals are periodic states exhibiting spontaneous symmetry breaking in either time-independent or periodically forced quantum many-body systems. Spontaneous modification of discrete time translation symmetry in a periodically driven physical system can create a discrete time crystal (DTC). DTCs constitute a state of matter with properties such as temporal rigid long-range order and coherence which are inherently desirable for quantum computing and quantum information processing. Despite their appeal, experimental demonstrations of DTCs are scarce and hence many significant aspects of their behavior remain unexplored. Here, we report the experimental observation and theoretical investigation of photonic DTCs in a Kerr-nonlinear optical microcavity. Empowered by the simultaneous self-injection locking of two independent lasers with arbitrarily large frequency separation to two cavity modes and a dissipative soliton, this room-temperature all-optical platform enables observing novel states like DTCs carrying defects, and realizing long-awaited phenomena such as DTC phase transitions and mutual interactions. To the best of our knowledge, this is the first experimental demonstration of a dissipative DTC, as well as the concurrent self-injection locking of two continuous-wave lasers to different modes of the same family in a Kerr cavity. Combined with monolithic fabrication, it can result in chip-scale DTCs, paving the way for liberating time crystals from sophisticated laboratory setups and propelling them toward real-world applications.

physics.optics↗

arXiv2019

Probing 10 μK stability and residual drifts in the cross-polarized dual-mode stabilization of single-crystal ultrahigh-Q optical resonators

The thermal stability of monolithic optical microresonators is essential for many mesoscopic photonic applications such as ultrastable laser oscillators, photonic microwave clocks, and precision navigation and sensing. Their fundamental performance is largely bounded by thermal instability. Sensitive thermal monitoring can be achieved by utilizing cross-polarized dual-mode beat frequency metrology, determined by the polarization-dependent thermorefractivity of a single-crystal microresonator, wherein the heterodyne radio-frequency beat pins down the optical mode volume temperature for precision stabilization. Here, we investigate the correlation between the dual-mode beat frequency and the resonator temperature with time and the associated spectral noise of the dual-mode beat frequency in a single-crystal ultrahigh-Q MgF2 resonator to illustrate that dual-mode frequency metrology can potentially be utilized for resonator temperature stabilization reaching the fundamental thermal noise limit in a realistic system. We show a resonator long-term temperature stability of 8.53 μK after stabilization and unveil various sources that hinder the stability from reaching sub-μK in the current system, an important step towards compact precision navigation, sensing and frequency reference architectures.

physics.ins-det↗

arXiv2017

Orthogonally Polarized Kerr Frequency Combs

Kerr optical frequency combs with multi-gigahertz spacing have previously been demonstrated in chip-scale microresonators, with potential applications in coherent communication, spectroscopy, arbitrary waveform generation, and radio frequency photonic oscillators. In general, the harmonics of a frequency comb are identically polarized in a single microresonator. In this work, we report that one comb in one polarization is generated by an orthogonally polarized soliton comb and two low-noise, orthogonally polarized combs interact with each other and exist simultaneously in a single microresonator. The second comb generation is attributed to the strong cross-phase modulation with the orthogonally polarized soliton comb and the high peak power of the intracavity soliton pulse. Experimental results show that a second frequency comb is excited even when a continuous wave light as a "seed"-with power as low as 0.1 mW-is input, while its own power level is below the threshold of comb generation. Moreover, the second comb has a concave envelope, which is different from the sech2 envelope of the soliton comb. This is due to the frequency mismatch between the harmonics and the resonant frequency. We also find that the repetition rates of these two combs coincide, although two orthogonal resonant modes are characterized by different free spectral ranges.

physics.optics↗

arXiv2017

Optical Lattice Trap for Kerr Solitons

We show theoretically and numerically that dichromatic pumping of a nonlinear microresonator by two continuous wave coherent optical pumps creates an optical lattice trap that results in the localization of intra-cavity Kerr solitons with soliton positions defined by the beat frequency of the pumps. This phenomenon corresponds to the stabilization of the Kerr frequency comb repetition rate. The locking of the second pump, through adiabatic tuning of its frequency, to the comb generated by the first pump allows transitioning to single-soliton states, manipulating the position of Kerr solitons in the cavity, and tuning the frequency comb repetition rate within the locking range. It also explains soliton crystal formation in resonators supporting a dispersive wave emitted as a result of higher-order group velocity dispersion or avoided mode crossing. We show that dichromatic pumping by externally stabilized pumps can be utilized for stabilization of microresonator-based optical frequency combs when the comb span does not cover an octave or a significant fraction thereof and standard self-referencing techniques cannot be employed. Our findings have significant ramifications for high-precision applications of optical frequency combs in spectrally pure signal generation, metrology, and timekeeping.

nlin.PS↗

arXiv2017

Microresonator-stabilized extended cavity diode laser for supercavity frequency stabilization

We demonstrate a simple, compact, and cost-effective laser noise reduction method for stabilizing an extended cavity diode laser to a 3x105 finesse mirror Fabry-Pérot (F-P) cavity corresponding to resonance linewidth of 10 kHz using a crystalline MgF2 whispering gallery mode microresonator (WGMR). The laser linewidth is reduced to sub-kHz such that a stable Pound-Drever-Hall (PDH) error signal is built up. The wavelength of the pre-stabilized laser is tunable within a large bandwidth covering the high reflection mirror coating of a F-P supercavity.

physics.optics↗

arXiv2017

Chasing the thermodynamical noise limit in whispering-gallery-mode resonators for ultrastable laser frequency stabilization

Ultrastable high-spectral-purity lasers have served as the cornerstone behind optical atomic clocks, quantum measurements, precision optical-microwave generation, high resolution optical spectroscopy and sensing. Hertz-level lasers stabilized to high finesse Fabry-Pérot mirror cavities are typically used for these studies but are large and fragile such that they have remained laboratory instruments. There is a clear demand in rugged miniaturized lasers operating potentially at comparable stabilities to those bulk lasers. Over the past decade, ultrahigh-Q optical whispering-gallery-mode (WGM) resonators have served as a platform for low-noise microlasers but have not yet reached the ultimate stabilities defined by their fundamental noise. Here, we show the noise characteristics of WGM resonators and demonstrate a resonator-stabilized laser at the fundamental limit by compensating the intrinsic thermal expansion of a WGM resonator, allowing a sub-25 Hz linewidth and a 32 Hz Allan deviation on the 191 THz carrier in 100 ms integration. We also reveal the environmental sensitivities of the resonator at the thermodynamical noise limit and long-term frequency drifts governed by random-walk-noise statistics.

physics.optics↗

arXiv2016

High-contrast Kerr Frequency Combs

Kerr frequency combs with depressed harmonic at the optical pump frequency are theoretically explained and experimentally demonstrated. This result is achieved in a MgF$_2$ photonic belt resonator having reduced density of modes in its spectrum and configured with the add-drop optical couplers. ©2016 California Institute of Technology. Government sponsorship

physics.optics↗

arXiv2016

A stabilized chip-scale Kerr frequency comb via a high-Q reference photonic microresonator

We stabilize a chip-scale Si3N4 phase-locked Kerr frequency comb via locking the pump laser to an independent stable high-Q reference microresonator and locking the comb spacing to an external microwave oscillator. In this comb, the pump laser shift induces negligible impact on the comb spacing change. This scheme is a step towards miniaturization of the stabilized Kerr comb system as the microresonator reference can potentially be integrated on-chip. Fractional instability of the optical harmonics of the stabilized comb is limited by the microwave oscillator used for comb spacing lock below 1 s averaging time and coincides with the pump laser drift in the long term.

physics.optics↗

arXiv2015

Enabling Arbitrary Wavelength Optical Frequency Combs on Chip

A necessary condition for generation of bright soliton Kerr frequency combs in microresonators is to achieve anomalous group velocity dispersion (GVD) for the resonator modes. This condition is hard to implement in visible as well as ultraviolet since the majority of optical materials are characterized with large normal GVD in these wavelength regions. We overcome this challenge by borrowing ideas from strongly dispersive coupled systems in solid state physics and optics. We show that photonic compound ring resonators can possess large anomalous GVD at any desirable wavelength, even if each individual resonator is characterized with normal GVD. Based on this concept we design a mode locked frequency comb with thin-film silicon nitride compound ring resonators in the vicinity of Rubidium D1 line (794.6nm) and propose to use this optical comb as a flywheel for chip-scale optical clocks.

physics.optics↗

arXiv2015

Generation of Kerr combs centered at 4.5μm in crystalline microresonators pumped by quantum cascade lasers

We report on the generation of mid-infrared Kerr frequency combs in high-finesse CaF$_2$ and MgF$_2$ whispering-gallery mode resonators pumped with continuous wave room temperature quantum cascade lasers. The combs were centered at 4.5$μ$m, the longest wavelength to date. A frequency comb wider than a half of an octave was demonstrated when approximately 20mW of pump power was coupled to an MgF2 resonator characterized with quality factor exceeding 10$^8$.

physics.optics↗

arXiv2014

Feshbach Resonances in Kerr Frequency Combs

We show that both the power and repetition rate of a frequency comb generated in a nonlinear ring resonator, pumped with continuous wave (cw) coherent light, are modulated. The modulation is brought about by the interaction of the cw background with optical pulses excited in the resonator, and occurs in resonators with nonzero high-order chromatic dispersion and wavelength-dependent quality factor. The modulation frequency corresponds to the detuning of the pump frequency from the eigenfrequency of the pumped mode in the resonator.

physics.optics↗

arXiv2014

Noise conversion in Kerr comb RF photonic oscillators

Transfer of amplitude and phase noise from a continuous wave optical pump to the repetition rate of a Kerr frequency comb is studied theoretically, with focus on generation of spectrally pure radio frequency (RF) signals via demodulation of the frequency comb on a fast photodiode. It is shown that both the high order chromatic dispersion of the resonator spectrum and frequency-dependent quality factor of the resonator modes facilitate the optical-to-RF noise conversion that limits spectral purity of the RF signal.

physics.optics↗

arXiv2014

Generation of a coherent near-infrared Kerr frequency comb in a monolithic microresonator with normal GVD

We demonstrate experimentally, and explain theoretically, generation of a wide, fundamentally phase locked Kerr frequency comb in a nonlinear resonator with a normal group velocity dispersion. A magnesium fluoride whispering gallery resonator characterized with 10 GHz free spectral range and pumped either at 780 nm or 795 nm is used in the experiment. The envelope of the observed frequency comb differs significantly from the Kerr frequency comb spectra reported previously. We show via numerical simulation that, while the frequency comb does not correspond to generation of short optical pulses, the relative phases of the generated harmonics are fixed.

physics.optics↗

arXiv2014

On limitation of quality factor of single mode resonators with finite size

Using realistic numerical models we analyze radiative loss of bound and unbound modes of specially designed high-Q whispering gallery and Fabry-Perot cavities of similar size and shape, and find a set of parameters when they can be treated as single mode structures. We show that these cavities have similar properties in spite of their different loss mechanisms. The cavity morphology engineering does not lead to reduction of the resonator quality factor.

physics.optics↗

arXiv2012

Chaotic dynamics of frequency combs generated with continuously pumped nonlinear microresonators

We theoretically and experimentally investigate the chaotic regime of optical frequency combs generated in nonlinear ring microresonators pumped with continuous wave light. We show that the chaotic regime reveals itself, in an apparently counter-intuitive way, by a flat top symmetric envelope of the frequency spectrum, when observed by means of an optical spectrum analyzer. The comb demodulated on a fast photodiode produces a noisy radio frequency signal with an spectral width significantly exceeding the linear bandwidth of the microresonator mode.

physics.optics↗

arXiv2011

RF-Photonic Frequency Stability Gear Box

An optical technique based on stability transfer among modes of a monolithic optical microresonator is proposed for long therm frequency stabilization of a radiofrequency (RF) oscillator. We show that locking two resonator modes, characterized with dissimilar sensitivity in responding to an applied forcing function, to a master RF oscillator allows enhancing the long term stability of a slave RF oscillator locked to two resonator modes having nearly identical sensitivity. For instance, the stability of a 10 MHz master oscillator characterized with Allan deviation of 10^-7 at 10^4s can be increased and transferred to a slave oscillator with identical stability performance, so that the resultant Allan deviation of the slave oscillator becomes equal to 10-13 at 10^4s. The method does not require absolute frequency references to achieve such a performance.

physics.optics↗