SearcharxivSearch

arXiv subjects

Lutz Lampe

Publications and source records attributed to Lutz Lampe.

At least 19 recordsLinked to original sources

GQ-FSL: Green Quantized Federated Split Learning Framework for Wireless Edge Networks

Deploying state-of-the-art deep neural networks (DNNs) at the wireless edge is severely bottlenecked by the strict energy and resource constraints of mobile devices. Although federated split learning (FSL) alleviates on-device computational burdens by offloading workloads to an edge server, this may introduce systemic overheads, while the continuous exchange of intermediate activations, gradients, and submodels still incurs significant energy consumption (EC). To address this, we propose a green quantized FSL (GQ-FSL) framework that incorporates stochastic quantization for both local collaborative training and wireless transmissions. Notably, GQ-FSL supports asymmetric precision levels for the client- and server-side submodels, effectively decoupling device energy constraints from global convergence degradation. To quantify these tradeoffs, we develop parameterized energy models for the split architecture and derive a theoretical convergence bound under statistically heterogeneous data. Building on that, we formulate a joint optimization problem to configure the DNN split point and precision levels, minimizing the total system EC while satisfying strict latency and target accuracy constraints. Ultimately, we demonstrate that GQ-FSL enables large-scale DNN deployment on resource-constrained devices, achieving superior energy efficiency compared to quantized federated learning and full-precision FSL.

cs.LG

Sequential Neural Probabilistic Amplitude Shaping: Learning the Channel's Language

We present the first neural probabilistic amplitude shaping that outperforms existing methods while accounting for all implementation losses, using a block-less, easily implementable sequential autoregressive encoder compatible with arithmetic distribution matching, yielding reduced rate loss and higher achievable information rates.

cs.LG

Neural Probabilistic Amplitude Shaping for Nonlinear Fiber Channels

We introduce neural probabilistic amplitude shaping, a joint-distribution learning framework for coherent fiber systems. The proposed scheme provides a 0.5 dB signal-to-noise ratio gain over sequence selection for dual-polarized 64-QAM transmission across a single-span 205 km link.

cs.LG

Smart Timing Synchronization for Small Data Transmission

Cellular Internet-of-things (C-IoT) user equipments (UEs) typically transmit periodic but small amounts of uplink data to the base station. To avoid undergoing a traditional random access procedure prior to every transmission, 5th generation (5G) and newer systems use configured grants for small data transmission (CG-SDT), which is equivalent to its long-term evolution (LTE) counterpart of preconfigured uplink resources (PURs)-based transmission. CG-SDT configures uplink resources to UEs in advance for transmission without a random access procedure. A prerequisite for CG-SDT is that the UEs must use a valid timing advance (TA). This is done by validating a previously held TA before CG-SDT. While this validation is trivial for stationary UEs, mobile UEs often encounter conditions where the previous TA is no longer valid and a new one is to be requested by falling back to legacy random access procedures. This limits the applicability of CG-SDT in mobile UEs. To this end, we propose UE-native smart timing synchronization techniques to counter this drawback and ensure a near-universal adoption of CG-SDT. We introduce new machine learning-aided solutions for validation and prediction of TA for UEs with any type of mobility. We perform comprehensive simulation evaluations across different types of communication environments to demonstrate the effectiveness of our proposed solution in predicting the TA.

eess.SP

Comprehensive Signal Modeling for Talkative Power Conversion

Talkative power conversion is a switching ripple communication technique that integrates data modulation into a switched-mode power electronics converter, enabling simultaneous information transmission and power conversion. Despite numerous research papers published over the last decade on various theoretical and practical aspects of this emerging topic, thorough signal modeling suitable for analysis and computer simulations is still lacking. In this article, we derive the continuous-time output voltage of a DC/DC switched-mode power electronics converter for a broad range of pulsed-based modulation schemes. We also develop corresponding discrete-time signal models and assess their accuracies. Finally, we devise a generic end-to-end signal model for arbitrary modulation signals, discuss implications of continuous-time and discrete-time signal modeling on equalization, and consider generalizations to include parasitic effects as well as the influence of general impedance loads.

eess.SY

Probabilistic Shaping for Nonlinearity Tolerance

Optimizing the input probability distribution of a discrete-time channel is a standard step in the information-theoretic analysis of digital communication systems. Nevertheless, many practical communication systems transmit uniformly and independently distributed symbols drawn from regular constellation sets. The introduction of the probabilistic amplitude shaping architecture has renewed interest in using optimized probability distributions, i.e., probabilistic shaping. Traditionally, probabilistic shaping has been employed to reduce the transmit power required for a given information rate over additive noise channels. While this translates into substantive performance gains for optical fiber communication systems, the interaction of shaping and fiber nonlinearity has posed intriguing questions. At first glance, probabilistic shaping seems to exacerbate nonlinear interference noise (NLIN) due to larger higher-order standardized moments. Therefore, the optimization of shaping distributions must differ from those used for linear channels. Secondly, finite-length effects related to the memory of the nonlinear fiber channel have been observed. This suggests that the marginal input-symbol distribution is not the only consideration. This paper provides a tutorial-style discussion of probabilistic shaping for optical fiber communication. Since the distinguishing property of the channel is the signal-dependent NLIN, we speak of probabilistic shaping for nonlinearity tolerance. Our analysis builds on the first-order time-domain perturbation approximation of the nonlinear fiber channel and revisits the notion of linear and nonlinear shaping gain. We largely focus on probabilistic amplitude shaping with popular shaping methods. The concept of shaping via sequence selection is given special consideration, as it inherently optimizes a multivariate distribution for shaped constellations.

eess.SP

Perturbation-based Sequence Selection for Probabilistic Amplitude Shaping

We introduce a practical sign-dependent sequence selection metric for probabilistic amplitude shaping and propose a simple method to predict the gains in signal-to-noise ratio (SNR) for sequence selection. The proposed metric provides a $0.5$ dB SNR gain for single-polarized 256-QAM transmission over a long-haul fiber link.

eess.SP

Bayesian Phase Search for Probabilistic Amplitude Shaping

We introduce a Bayesian carrier phase recovery (CPR) algorithm which is robust against low signal-to-noise ratio scenarios. It is therefore effective for phase recovery for probabilistic amplitude shaping (PAS). Results validate that the new algorithm overcomes the degradation experienced by blind phase-search CPR for PAS.

eess.SP

Deep Learning-Aided Perturbation Model-Based Fiber Nonlinearity Compensation

Fiber nonlinearity effects cap achievable rates and ranges in long-haul optical fiber communication links. Conventional nonlinearity compensation methods, such as perturbation theory-based nonlinearity compensation (PB-NLC), attempt to compensate for the nonlinearity by approximating analytical solutions to the signal propagation over optical fibers. However, their practical usability is limited by model mismatch and the immense computational complexity associated with the analytical computation of perturbation triplets and the nonlinearity distortion field. Recently, machine learning techniques have been used to optimise parameters of PB-based approaches, which traditionally have been determined analytically from physical models. It has been claimed in the literature that the learned PB-NLC approaches have improved performance and/or reduced computational complexity over their non-learned counterparts. In this paper, we first revisit the acclaimed benefits of the learned PB-NLC approaches by carefully carrying out a comprehensive performance-complexity analysis utilizing state-of-the-art complexity reduction methods. Interestingly, our results show that least squares-based PB-NLC with clustering quantization has the best performance-complexity trade-off among the learned PB-NLC approaches. Second, we advance the state-of-the-art of learned PB-NLC by proposing and designing a fully learned structure. We apply a bi-directional recurrent neural network for learning perturbation triplets that are alike those obtained from the analytical computation and are used as input features for the neural network to estimate the nonlinearity distortion field. Finally, we demonstrate through numerical simulations that our proposed fully learned approach achieves an improved performance-complexity trade-off compared to the existing learned and non-learned PB-NLC techniques.

eess.SP

Enhanced Hybrid Automatic Repeat Request Scheduling for Non-Terrestrial IoT Networks

Non-terrestrial networks (NTNs) complement their terrestrial counterparts in enabling ubiquitous connectivity globally by serving unserved and/or underserved areas of the world. While supporting enhanced mobile broadband (eMBB) data over NTNs has been extensively studied in the past, focus on massive machine type communication (mMTC) over NTNs is currently growing, as also witnessed by the new study and work items included into the 3rd generation partnership project (3GPP) agenda for commissioning specifications for Internet-of-Things (IoT) communications over NTNs. Supporting mMTC in non-terrestrial cellular IoT (C-IoT) networks requires jointly addressing the unique challenges introduced in NTNs and CIoT communications. In this paper, we tackle one such issue caused due to the extended round-trip time and increased path loss in NTNs resulting in a degraded network throughput. We propose smarter transport blocks scheduling methods that can increase the efficiency of resource utilization. We conduct end-to-end link-level simulations of C-IoT traffic over NTNs and present numerical results of the data rate gains achieved to show the performance of our proposed solutions against legacy scheduling methods.

cs.NI

Joint PMD Tracking and Nonlinearity Compensation with Deep Neural Networks

Overcoming fiber nonlinearity is one of the core challenges limiting the capacity of optical fiber communication systems. Machine learning based solutions such as learned digital backpropagation (LDBP) and the recently proposed deep convolutional recurrent neural network (DCRNN) have been shown to be effective for fiber nonlinearity compensation (NLC). Incorporating distributed compensation of polarization mode dispersion (PMD) within the learned models can improve their performance even further but at the same time, it also couples the compensation of nonlinearity and PMD. Consequently, it is important to consider the time variation of PMD for such a joint compensation scheme. In this paper, we investigate the impact of PMD drift on the DCRNN model with distributed compensation of PMD. We propose a transfer learning based selective training scheme to adapt the learned neural network model to changes in PMD. We demonstrate that fine-tuning only a small subset of weights as per the proposed method is sufficient for adapting the model to PMD drift. Using decision directed feedback for online learning, we track continuous PMD drift resulting from a time-varying rotation of the state of polarization (SOP). We show that transferring knowledge from a pre-trained base model using the proposed scheme significantly reduces the re-training efforts for different PMD realizations. Applying the hinge model for SOP rotation, our simulation results show that the learned models maintain their performance gains while tracking the PMD.

eess.SP

Probabilistic Amplitude Shaping and Nonlinearity Tolerance: Analysis and Sequence Selection Method

Probabilistic amplitude shaping (PAS) is a practical means to achieve a shaping gain in optical fiber communication. However, PAS and shaping in general also affect the signal-dependent generation of nonlinear interference. This provides an opportunity for nonlinearity mitigation through PAS, which is also referred to as a nonlinear shaping gain. In this paper, we introduce a linear lowpass filter model that relates transmitted symbol-energy sequences and nonlinear distortion experienced in an optical fiber channel. Based on this model, we conduct a nonlinearity analysis of PAS with respect to shaping blocklength and mapping strategy. Our model explains results and relationships found in literature and can be used as a design tool for PAS with improved nonlinearity tolerance. We use the model to introduce a new metric for PAS with sequence selection. We perform simulations of selection-based PAS with various amplitude shapers and mapping strategies to demonstrate the effectiveness of the new metric in different optical fiber system scenarios.

cs.IT

Learning for Perturbation-Based Fiber Nonlinearity Compensation

Several machine learning inspired methods for perturbation-based fiber nonlinearity (PBNLC) compensation have been presented in recent literature. We critically revisit acclaimed benefits of those over non-learned methods. Numerical results suggest that learned linear processing of perturbation triplets of PB-NLC is preferable over feedforward neural-network solutions.

eess.SP

Power Line Communication and Sensing Using Time Series Forecasting

Smart electrical grids rely on data communication to support their operation and on sensing for diagnostics and maintenance. Usually, the roles of communication and sensing equipment are different, i.e., communication equipment does not participate in sensing tasks and vice versa. Power line communication (PLC) offers a cost-effective solution for joint communication and sensing for smart grids. This is because the high-frequency PLC signals used for data communication also reveal detailed information regarding the health of the power lines that they travel through. Traditional PLC-based power line or cable diagnostic solutions are dependent on prior knowledge of the cable type, network topology, and/or characteristics of the anomalies. In this paper, we develop a power line sensing technique that can detect various types of cable anomalies without any prior domain knowledge. To this end, we design a solution that first uses time-series forecasting to predict the PLC channel state information at any given point in time based on its historical data. Under the approximation that the prediction error follows a Gaussian distribution, we then perform chi-squared statistical test to build an anomaly detector which identifies the occurrence of a cable fault. We demonstrate the effectiveness and universality of our sensing solution via evaluations conducted using both synthetic and real-world data extracted from low- and medium-voltage distribution networks.

eess.SP

Perturbation Theory-Aided Learned Digital Back-Propagation Scheme for Optical Fiber Nonlinearity Compensation

Derived from the regular perturbation treatment of the nonlinear Schrodinger equation, a machine learning-based scheme to mitigate the intra-channel optical fiber nonlinearity is proposed. Referred to as the perturbation theory-aided (PA) learned digital back-propagation (LDBP), the proposed scheme constructs a deep neural network (DNN) in a way similar to the split-step Fourier method: linear and nonlinear operations alternate. Inspired by the perturbation analysis, the intra-channel cross-phase modulation term is conveniently represented by matrix operations in the DNN. The introduction of this term in each nonlinear operation considerably improves the performance, as well as enables the flexibility of PA-LDBP by adjusting the numbers of spans per step. The proposed scheme is evaluated by numerical simulations of a single carrier optical fiber communication system operating at 32 Gbaud with 64-quadrature amplitude modulation and 20*80 km transmission distance. The results show that the proposed scheme achieves approximately 3.5 dB, 1.8 dB, 1.4 dB, and 0.5 dB performance gain in terms of Q2 factor over the linear compensation, when the numbers of spans per step are 1, 2, 4, and 10, respectively. Two methods are proposed to reduce the complexity of PALDBP, i.e., pruning the number of perturbation coefficients and chromatic dispersion compensation in the frequency domain for multi-span per step cases. Investigation of the performance and complexity suggests that PA-LDBP attains improved performance gains with reduced complexity when compared to LDBP in the cases of 4 and 10 spans per step.

eess.SP

Outage Performance Analysis of Widely Linear Receivers in Uplink Multi-user MIMO Systems

This paper considers the application of widely linear (WL) receivers in an uplink multi-user system using real-valued modulation schemes, where the cellular base station (BS) with multiple antennas provides connectivity for randomly deployed single-antenna users. The targeted use case is massive machine type communication (mMTC) with grant-free access in the uplink, where the network is required to host a large number of low data rate devices transmitting in an uncoordinated fashion. Four types of WL receivers are investigated, namely the WL zero-forcing (ZF) and the WL minimum meansquared error (MMSE) receivers, along with their enhanced versions employing successive interference cancellation (SIC) with channel-dependent ordering, i.e., the WL-ZF-SIC and WL-MMSE-SIC receivers. The outage performances of these receivers are analytically characterized in the high signal-to-noise ratio (SNR) regime and compared to those of conventional linear (CL) receivers using complex-valued modulation schemes. For the non-SIC receivers, we show that, when compared to the CL counterparts, the WL receivers yield a higher diversity gain when decoding the same number of users and have the same diversity gain but a decreased coding gain when the number of users is nearly doubled. The outage performance analysis of WL-SIC receivers is facilitated by the marginal distribution of ordered eigenvalues of a real-valued Wishart matrix. It is shown that the SIC operation with channel-dependent ordering brings no additional diversity gain to the WL receivers but instead increases the coding gain. Moreover, the coding gain of WL-SIC receivers grows as the number of users increases and even exceeds that of CL-SIC receivers under suitable conditions.

eess.SP