arXiv subjects

Mérouane Debbah

Publications and source records attributed to Mérouane Debbah.

At least 199 records · Page 11Linked to original sources

arXiv2015

Interference-Aware RZF Precoding for Multi Cell Downlink Systems

Recently, a structure of an optimal linear precoder for multi cell downlink systems has been described in [1, Eq (3.33)]. Other references (e.g., [2,3]) have used simplified versions of the precoder to obtain promising performance gains. These gains have been hypothesized to stem from the additional degrees of freedom that allow for interference mitigation through interference relegation to orthogonal subspaces. However, no conclusive or rigorous understanding has yet been developed. In this paper, we build on an intuitive interference induction trade-off and the aforementioned precoding structure to propose an interference aware RZF (iaRZF) precoding scheme for multi cell downlink systems and we analyze its rate performance. Special emphasis is placed on the induced interference mitigation mechanism of iaRZF. For example, we will verify the intuitive expectation that the precoder structure can either completely remove induced inter-cell or intra-cell interference. We state new results from large-scale random matrix theory that make it possible to give more intuitive and insightful explanations of the precoder behavior, also for cases involving imperfect channel state information (CSI). We remark especially that the interference-aware precoder makes use of all available information about interfering channels to improve performance. Even very poor CSI allows for significant sum-rate gains. Our obtained insights are then used to propose heuristic precoder parameters for arbitrary systems, whose effectiveness are shown in more involved system scenarios. Furthermore, calculation and implementation of these parameters does not require explicit inter base station cooperation.

cs.IT↗

arXiv2015

Caching at the Edge: a Green Perspective for 5G Networks

Endowed with context-awareness and proactive capabilities, caching users' content locally at the edge of the network is able to cope with increasing data traffic demand in 5G wireless networks. In this work, we focus on the energy consumption aspects of cache-enabled wireless cellular networks, specifically in terms of area power consumption (APC) and energy efficiency (EE). We assume that both base stations (BSs) and mobile users are distributed according to homogeneous Poisson point processes (PPPs) and we introduce a detailed power model that takes into account caching. We study the conditions under which the area power consumption is minimized with respect to BS transmit power, while ensuring a certain quality of service (QoS) in terms of coverage probability. Furthermore, we provide the optimal BS transmit power that maximizes the area spectral efficiency per unit total power spent. The main takeaway of this paper is that caching seems to be an energy efficient solution.

cs.IT↗

arXiv2015

Optimal Design of Energy-Efficient Multi-User MIMO Systems: Is Massive MIMO the Answer?

Assume that a multi-user multiple-input multiple-output (MIMO) system is designed from scratch to uniformly cover a given area with maximal energy efficiency (EE). What are the optimal number of antennas, active users, and transmit power? The aim of this paper is to answer this fundamental question. We consider jointly the uplink and downlink with different processing schemes at the base station and propose a new realistic power consumption model that reveals how the above parameters affect the EE. Closed-form expressions for the EE-optimal value of each parameter, when the other two are fixed, are provided for zero-forcing (ZF) processing in single-cell scenarios. These expressions prove how the parameters interact. For example, in sharp contrast to common belief, the transmit power is found to increase (not to decrease) with the number of antennas. This implies that energy-efficient systems can operate in high signal-to-noise ratio regimes in which interference-suppressing signal processing is mandatory. Numerical and analytical results show that the maximal EE is achieved by a massive MIMO setup wherein hundreds of antennas are deployed to serve a relatively large number of users using ZF processing. The numerical results show the same behavior under imperfect channel state information and in symmetric multi-cell scenarios.

cs.IT↗

arXiv2015

Cache-enabled Small Cell Networks: Modeling and Tradeoffs

We consider a network model where small base stations (SBSs) have caching capabilities as a means to alleviate the backhaul load and satisfy users' demand. The SBSs are stochastically distributed over the plane according to a Poisson point process (PPP), and serve their users either (i) by bringing the content from the Internet through a finite rate backhaul or (ii) by serving them from the local caches. We derive closed-form expressions for the outage probability and the average delivery rate as a function of the signal-to-interference-plus-noise ratio (SINR), SBS density, target file bitrate, storage size, file length and file popularity. We then analyze the impact of key operating parameters on the system performance. It is shown that a certain outage probability can be achieved either by increasing the number of base stations or the total storage size. Our results and analysis provide key insights into the deployment of cache-enabled small cell networks (SCNs), which are seen as a promising solution for future heterogeneous cellular networks.

cs.IT↗

arXiv2014

On the MIMO Capacity with Residual Transceiver Hardware Impairments

Radio-frequency (RF) impairments in the transceiver hardware of communication systems (e.g., phase noise (PN), high power amplifier (HPA) nonlinearities, or in-phase/quadrature-phase (I/Q) imbalance) can severely degrade the performance of traditional multiple-input multiple-output (MIMO) systems. Although calibration algorithms can partially compensate these impairments, the remaining distortion still has substantial impact. Despite this, most prior works have not analyzed this type of distortion. In this paper, we investigate the impact of residual transceiver hardware impairments on the MIMO system performance. In particular, we consider a transceiver impairment model, which has been experimentally validated, and derive analytical ergodic capacity expressions for both exact and high signal-to-noise ratios (SNRs). We demonstrate that the capacity saturates in the high-SNR regime, thereby creating a finite capacity ceiling. We also present a linear approximation for the ergodic capacity in the low-SNR regime, and show that impairments have only a second-order impact on the capacity. Furthermore, we analyze the effect of transceiver impairments on large-scale MIMO systems; interestingly, we prove that if one increases the number of antennas at one side only, the capacity behaves similar to the finite-dimensional case. On the contrary, if the number of antennas on both sides increases with a fixed ratio, the capacity ceiling vanishes; thus, impairments cause only a bounded offset in the capacity compared to the ideal transceiver hardware case.

cs.IT↗

arXiv2014

Low-Complexity Polynomial Channel Estimation in Large-Scale MIMO with Arbitrary Statistics

This paper considers pilot-based channel estimation in large-scale multiple-input multiple-output (MIMO) communication systems, also known as massive MIMO, where there are hundreds of antennas at one side of the link. Motivated by the fact that computational complexity is one of the main challenges in such systems, a set of low-complexity Bayesian channel estimators, coined Polynomial ExpAnsion CHannel (PEACH) estimators, are introduced for arbitrary channel and interference statistics. While the conventional minimum mean square error (MMSE) estimator has cubic complexity in the dimension of the covariance matrices, due to an inversion operation, our proposed estimators significantly reduce this to square complexity by approximating the inverse by a L-degree matrix polynomial. The coefficients of the polynomial are optimized to minimize the mean square error (MSE) of the estimate. We show numerically that near-optimal MSEs are achieved with low polynomial degrees. We also derive the exact computational complexity of the proposed estimators, in terms of the floating-point operations (FLOPs), by which we prove that the proposed estimators outperform the conventional estimators in large-scale MIMO systems of practical dimensions while providing a reasonable MSEs. Moreover, we show that L needs not scale with the system dimensions to maintain a certain normalized MSE. By analyzing different interference scenarios, we observe that the relative MSE loss of using the low-complexity PEACH estimators is smaller in realistic scenarios with pilot contamination. On the other hand, PEACH estimators are not well suited for noise-limited scenarios with high pilot power; therefore, we also introduce the low-complexity diagonalized estimator that performs well in this regime. Finally, we ...

cs.IT↗

arXiv2014

Optimizing Multi-Cell Massive MIMO for Spectral Efficiency: How Many Users Should Be Scheduled?

Massive MIMO is a promising technique to increase the spectral efficiency of cellular networks, by deploying antenna arrays with hundreds or thousands of active elements at the base stations and performing coherent beamforming. A common rule-of-thumb is that these systems should have an order of magnitude more antennas, $N$, than scheduled users, $K$, because the users' channels are then likely to be quasi-orthogonal. However, it has not been proved that this rule-of-thumb actually maximizes the spectral efficiency. In this paper, we analyze how the optimal number of scheduled users, $K^\star$, depends on $N$ and other system parameters. The value of $K^\star$ in the large-$N$ regime is derived in closed form, while simulations are used to show what happens at finite $N$, in different interference scenarios, and for different beamforming.

cs.IT↗

arXiv2014

Asymptotic Analysis of SU-MIMO Channels With Transmitter Noise and Mismatched Joint Decoding

Hardware impairments in radio-frequency components of a wireless system cause unavoidable distortions to transmission that are not captured by the conventional linear channel model. In this paper, a 'binoisy' single-user multiple-input multiple-output (SU-MIMO) relation is considered where the additional distortions are modeled via an additive noise term at the transmit side. Through this extended SU-MIMO channel model, the effects of transceiver hardware impairments on the achievable rate of multi-antenna point-to-point systems are studied. Channel input distributions encompassing practical discrete modulation schemes, such as, QAM and PSK, as well as Gaussian signaling are covered. In addition, the impact of mismatched detection and decoding when the receiver has insufficient information about the non-idealities is investigated. The numerical results show that for realistic system parameters, the effects of transmit-side noise and mismatched decoding become significant only at high modulation orders.

cs.IT↗

arXiv2014

Preliminary Results on 3D Channel Modeling: From Theory to Standardization

Three dimensional beamforming (3D) (also elevation beamforming) is now gaining a growing interest among researchers in wireless communication. The reason can be attributed to its potential to enable a variety of strategies like sector or user specific elevation beamforming and cell-splitting. Since these techniques cannot be directly supported by current LTE releases, the 3GPP is now working on defining the required technical specifications. In particular, a large effort is currently made to get accurate 3D channel models that support the elevation dimension. This step is necessary as it will evaluate the potential of 3D and FD(Full Dimensional) beamforming techniques to benefit from the richness of real channels. This work aims at presenting the on-going 3GPP study item "Study on 3D-channel model for Elevation Beamforming and FD-MIMO studies for LTE", and positioning it with respect to previous standardization works.

cs.IT↗

arXiv2014

Massive MIMO Systems with Non-Ideal Hardware: Energy Efficiency, Estimation, and Capacity Limits

The use of large-scale antenna arrays can bring substantial improvements in energy and/or spectral efficiency to wireless systems due to the greatly improved spatial resolution and array gain. Recent works in the field of massive multiple-input multiple-output (MIMO) show that the user channels decorrelate when the number of antennas at the base stations (BSs) increases, thus strong signal gains are achievable with little inter-user interference. Since these results rely on asymptotics, it is important to investigate whether the conventional system models are reasonable in this asymptotic regime. This paper considers a new system model that incorporates general transceiver hardware impairments at both the BSs (equipped with large antenna arrays) and the single-antenna user equipments (UEs). As opposed to the conventional case of ideal hardware, we show that hardware impairments create finite ceilings on the channel estimation accuracy and on the downlink/uplink capacity of each UE. Surprisingly, the capacity is mainly limited by the hardware at the UE, while the impact of impairments in the large-scale arrays vanishes asymptotically and inter-user interference (in particular, pilot contamination) becomes negligible. Furthermore, we prove that the huge degrees of freedom offered by massive MIMO can be used to reduce the transmit power and/or to tolerate larger hardware impairments, which allows for the use of inexpensive and energy-efficient antenna elements.

cs.IT↗

arXiv2014

Linear Precoding Based on Polynomial Expansion: Reducing Complexity in Massive MIMO

Large-scale multi-user multiple-input multiple-output (MIMO) techniques have the potential to bring tremendous improvements for future communication systems. Counter-intuitively, the practical issues of having uncertain channel knowledge, high propagation losses, and implementing optimal non-linear precoding are solved more-or-less automatically by enlarging system dimensions. However, the computational precoding complexity grows with the system dimensions. For example, the close-to-optimal regularized zero-forcing (RZF) precoding is very complicated to implement in practice, since it requires fast inversions of large matrices in every coherence period. Motivated by the high performance of RZF, we propose to replace the matrix inversion by a truncated polynomial expansion (TPE), thereby obtaining the new TPE precoding scheme which is more suitable for real-time hardware implementation. The degree of the matrix polynomial can be adapted to the available hardware resources and enables smooth transition between simple maximum ratio transmission (MRT) and more advanced RZF. By deriving new random matrix results, we obtain a deterministic expression for the asymptotic signal-to-interference-and-noise ratio (SINR) achieved by TPE precoding in large-scale MIMO systems. Furthermore, we provide a closed-form expression for the polynomial coefficients that maximizes this SINR. To maintain a fixed per-user rate loss as compared to RZF, the polynomial degree does not need to scale with the system, but it should be increased with the quality of the channel knowledge and the signal-to-noise ratio (SNR).

cs.IT↗

arXiv2014

Linear Precoding Based on Polynomial Expansion: Large-Scale Multi-Cell MIMO Systems

Large-scale MIMO systems can yield a substantial improvement in spectral efficiency for future communication systems. Due to the finer spatial resolution achieved by a huge number of antennas at the base stations, these systems have shown to be robust to inter-user interference and the use of linear precoding is asymptotically optimal. However, most precoding schemes exhibit high computational complexity as the system dimensions increase. For example, the near-optimal RZF requires the inversion of a large matrix. This motivated our companion paper, where we proposed to solve the issue in single-cell multi-user systems by approximating the matrix inverse by a truncated polynomial expansion (TPE), where the polynomial coefficients are optimized to maximize the system performance. We have shown that the proposed TPE precoding with a small number of coefficients reaches almost the performance of RZF but never exceeds it. In a realistic multi-cell scenario involving large-scale multi-user MIMO systems, the optimization of RZF precoding has thus far not been feasible. This is mainly attributed to the high complexity of the scenario and the non-linear impact of the necessary regularizing parameters. On the other hand, the scalar weights in TPE precoding give hope for possible throughput optimization. Following the same methodology as in the companion paper, we exploit random matrix theory to derive a deterministic expression for the asymptotic SINR for each user. We also provide an optimization algorithm to approximate the weights that maximize the network-wide weighted max-min fairness. The optimization weights can be used to mimic the user throughput distribution of RZF precoding. Using simulations, we compare the network throughput of the TPE precoding with that of the suboptimal RZF scheme and show that our scheme can achieve higher throughput using a TPE order of only 3.

cs.IT↗

arXiv2014

Effects of Mobility on User Energy Consumption and Total Throughput in a Massive MIMO System

Macroscopic mobility of wireless users is important to determine the performance and energy effciency of a wireless network, because of the temporal correlations it introduces in the consumed power and throughput. In this work we introduce a methodology that obtains the long time statistics of such metrics in a network. After describing the general approach, we present a specific example of the uplink channel of a mobile user in the vicinity of a massive MIMO base-station antenna array. To guarantee a fixed SINR and rate, the user inverts the path-loss channel power, while moving around in the cell. To calculate the long time distribution of the consumed energy of the user, we assume his movement follows a Brownian motion, and then map the problem to the solution of the minimum eigenvalue of a partial differential equation, which can be solved either analytically, or numerically very fast. We also treat the throughput of a single user. We then discuss the results and how they can be generalized if the mobility is assumed to be a Levy random walk. We also provide a roadmap to use this technique when one considers multiple users and base stations.

cs.IT↗

arXiv2014

Living on the Edge: The Role of Proactive Caching in 5G Wireless Networks

This article explores one of the key enablers of beyond $4$G wireless networks leveraging small cell network deployments, namely proactive caching. Endowed with predictive capabilities and harnessing recent developments in storage, context-awareness and social networks, peak traffic demands can be substantially reduced by proactively serving predictable user demands, via caching at base stations and users' devices. In order to show the effectiveness of proactive caching, we examine two case studies which exploit the spatial and social structure of the network, where proactive caching plays a crucial role. Firstly, in order to alleviate backhaul congestion, we propose a mechanism whereby files are proactively cached during off-peak demands based on file popularity and correlations among users and files patterns. Secondly, leveraging social networks and device-to-device (D2D) communications, we propose a procedure that exploits the social structure of the network by predicting the set of influential users to (proactively) cache strategic contents and disseminate them to their social ties via D2D communications. Exploiting this proactive caching paradigm, numerical results show that important gains can be obtained for each case study, with backhaul savings and a higher ratio of satisfied users of up to $22\%$ and $26\%$, respectively. Higher gains can be further obtained by increasing the storage capability at the network edge.

cs.NI↗

arXiv2014

Many-to-Many Matching Games for Proactive Social-Caching in Wireless Small Cell Networks

In this paper, we address the caching problem in small cell networks from a game theoretic point of view. In particular, we formulate the caching problem as a many-to-many matching game between small base stations and service providers' servers. The servers store a set of videos and aim to cache these videos at the small base stations in order to reduce the experienced delay by the end-users. On the other hand, small base stations cache the videos according to their local popularity, so as to reduce the load on the backhaul links. We propose a new matching algorithm for the many-to-many problem and prove that it reaches a pairwise stable outcome. Simulation results show that the number of satisfied requests by the small base stations in the proposed caching algorithm can reach up to three times the satisfaction of a random caching policy. Moreover, the expected download time of all the videos can be reduced significantly.

cs.NI↗

arXiv2014

Detection and estimation of spikes in presence of noise and interference

In many practical situations, the useful signal is contained in a low-dimensional subspace, drown in noise and interference. Many questions related to the estimation and detection of the useful signal arise. Because of their particular structure, these issues are in connection to the problem that the mathematics community refers to as "spike detection and estimation". Previous works in this direction have been restricted to either determining the number of spikes or estimating their values while knowing their multiplicities. This motivates our work which considers the joint estimation of the number of spikes and their corresponding orders, a problem which has not been yet investigated to the best of our knowledge.

math.ST↗

arXiv2014

Two-Way Relaying under the Presence of Relay Transceiver Hardware Impairments

Hardware impairments in physical transceivers are known to have a deleterious effect on communication systems; however, very few contributions have investigated their impact on relaying. This paper quantifies the impact of transceiver impairments in a two-way amplify-and-forward configuration. More specifically, the effective signal-to-noise-and-distortion ratios at both transmitter nodes are obtained. These are used to deduce exact and asymptotic closed-form expressions for the outage probabilities (OPs), as well as tractable formulations for the symbol error rates (SERs). It is explicitly shown that non-zero lower bounds on the OP and SER exist in the high-power regime---this stands in contrast to the special case of ideal hardware, where the OP and SER go asymptotically to zero.

cs.IT↗

arXiv2014

A New Look at Dual-Hop Relaying: Performance Limits with Hardware Impairments

Physical transceivers have hardware impairments that create distortions which degrade the performance of communication systems. The vast majority of technical contributions in the area of relaying neglect hardware impairments and, thus, assumes ideal hardware. Such approximations make sense in low-rate systems, but can lead to very misleading results when analyzing future high-rate systems. This paper quantifies the impact of hardware impairments on dual-hop relaying, for both amplify-and-forward and decode-and-forward protocols. The outage probability (OP) in these practical scenarios is a function of the effective end-to-end signal-to-noise-and-distortion ratio (SNDR). This paper derives new closed-form expressions for the exact and asymptotic OPs, accounting for hardware impairments at the source, relay, and destination. A similar analysis for the ergodic capacity is also pursued, resulting in new upper bounds. We assume that both hops are subject to independent but non-identically distributed Nakagami-m fading. This paper validates that the performance loss is small at low rates, but otherwise can be very substantial. In particular, it is proved that for high signal-to-noise ratio (SNR), the end-to-end SNDR converges to a deterministic constant, coined the SNDR ceiling, which is inversely proportional to the level of impairments. This stands in contrast to the ideal hardware case in which the end-to-end SNDR grows without bound in the high-SNR regime. Finally, we provide fundamental design guidelines for selecting hardware that satisfies the requirements of a practical relaying system.

cs.IT↗