arXiv subjects

Mérouane Debbah

Publications and source records attributed to Mérouane Debbah.

At least 55 records · Page 3Linked to original sources

arXiv2025

Integrated Sensing, Communication, and Positioning in Cellular Vehicular Networks

In this correspondence, a novel integrated sensing and communication (ISAC) framework is proposed to accomplish data communication, vehicle positioning, and environment sensing simultaneously in a cellular vehicular network. By incorporating the vehicle positioning problem with the existing computational-imaging-based ISAC models, we formulate a special integrated sensing, communication, and positioning problem in which the unknowns are highly coupled. To mitigate the rank deficiency and make it solvable, we discretize the region of interest (ROI) into sensing and positioning pixels respectively, and exploit both the line-of-sight and non-line-of-sight propagation of the vehicles' uplink access signals. The resultant problem is shown to be a polynomial bilinear compressed sensing (CS) reconstruction problem, which is then solved by the alternating optimization (AO) algorithm to iteratively achieve symbol detection, vehicle positioning and environment sensing. Performance analysis and numerical results demonstrate the effectiveness of the proposed method.

eess.SP↗

arXiv2025

Fluid Antenna Meets RIS: Random Matrix Analysis and Two-Timescale Design for Multi-User Communications

The reconfigurability of fluid antenna systems (FASs) and reconfigurable intelligent surfaces (RISs) provides significant flexibility in optimizing channel conditions by jointly adjusting the positions of fluid antennas and the phase shifts of RISs. However, it is challenging to acquire the instantaneous channel state information (CSI) for both fluid antennas and RISs, while frequent adjustment of antenna positions and phase shifts will significantly increase the system complexity. To tackle this issue, this paper investigates the two-timescale design for FAS-RIS multi-user systems with linear precoding, where only the linear precoder design requires instantaneous CSI of the end-to-end channel, while the FAS and RIS optimization relies on statistical CSI. The main challenge comes from the complex structure of channel and inverse operations in linear precoding, such as regularized zero-forcing (RZF) and zero-forcing (ZF). Leveraging on random matrix theory (RMT), we first investigate the fundamental limits of FAS-RIS systems with RZF/ZF precoding by deriving the ergodic sum rate (ESR). This result is utilized to determine the minimum number of selected antennas to achieve a given ESR. Based on the evaluation result, we propose an algorithm to jointly optimize the antenna selection, regularization factor of RZF, and phase shifts at the RIS. Numerical results validate the accuracy of performance evaluation and demonstrate that the performance gain brought by joint FAS and RIS design is more pronounced with a larger number of users.

cs.IT↗

arXiv2025

Optimization for Massive 3D-RIS Deployment: A Generative Diffusion Model-Based Approach

Reconfigurable Intelligent Surfaces (RISs) transform the wireless environment by modifying the amplitude, phase, and polarization of incoming waves, significantly improving coverage performance. Notably, optimizing the deployment of RISs becomes vital, but existing optimization methods face challenges such as high computational complexity, limited adaptability to changing environments, and a tendency to converge on local optima. In this paper, we propose to optimize the deployment of large-scale 3D RISs using a diffusion model based on probabilistic generative learning. We begin by dividing the target area into fixed grids, with each grid corresponding to a potential deployment location. Then, a multi-RIS deployment optimization problem is formulated, which is difficult to solve directly. By treating RIS deployment as a conditional generation task, the well-trained diffusion model can generate the distribution of deployment strategies, and thus, the optimal deployment strategy can be obtained by sampling from this distribution. Simulation results demonstrate that the proposed diffusion-based method outperforms traditional benchmark approaches in terms of exceed ratio and generalization.

cs.NI↗

arXiv2025

A Comprehensive Tutorial and Survey of O-RAN: Exploring Slicing-aware Architecture, Deployment Options, Use Cases, and Challenges

Open-radio access network (O-RAN) seeks to establish the principles of openness, programmability, automation, intelligence, and hardware-software disaggregation with interoperable and standard-compliant interfaces. It advocates for multi-vendorism and multi-stakeholderism within a cloudified and virtualized wireless infrastructure, aimed at enhancing the deployment, operation, and management of RAN architecture. These enhancements promise increased flexibility, performance optimization, service innovation, energy efficiency, and cost effectiveness across fifth-generation (5G), sixth-generation (6G), and beyond networks. A silent feature of O-RAN architecture is its support for network slicing, which entails interaction with other domains of the cellular network, notably the transport network (TN) and the core network (CN), to realize end-to-end (E2E) network slicing. The study of this feature requires exploring the stances and contributions of diverse standards development organizations (SDOs). In this context, we note that despite the ongoing industrial deployments and standardization efforts, the research and standardization communities have yet to comprehensively address network slicing in O-RAN. To address this gap, this paper provides a comprehensive exploration of network slicing in O-RAN through an in-depth review of specification documents from O-RAN Alliance and research papers from leading industry and academic institutions. The paper commences with an overview of the relevant standardization and open source contributions, subsequently delving into the latest O-RAN architecture with an emphasis on its slicing aspects. Furthermore, the paper explores O-RAN deployment scenarios, examining options for the deployment and orchestration of RAN and TN slice subnets. It also discusses the slicing of the underlying infrastructure and provides an overview of various use cases related...

cs.NI↗

arXiv2025

Channel Estimation in Massive MIMO Systems with Orthogonal Delay-Doppler Division Multiplexing

Orthogonal delay-Doppler division multiplexing~(ODDM) modulation has recently been regarded as a promising technology to provide reliable communications in high-mobility situations. Accurate and low-complexity channel estimation is one of the most critical challenges for massive multiple input multiple output~(MIMO) ODDM systems, mainly due to the extremely large antenna arrays and high-mobility environments. To overcome these challenges, this paper addresses the issue of channel estimation in downlink massive MIMO-ODDM systems and proposes a low-complexity algorithm based on memory approximate message passing~(MAMP) to estimate the channel state information~(CSI). Specifically, we first establish the effective channel model of the massive MIMO-ODDM systems, where the magnitudes of the elements in the equivalent channel vector follow a Bernoulli-Gaussian distribution. Further, as the number of antennas grows, the elements in the equivalent coefficient matrix tend to become completely random. Leveraging these characteristics, we utilize the MAMP method to determine the gains, delays, and Doppler effects of the multi-path channel, while the channel angles are estimated through the discrete Fourier transform method. Finally, numerical results show that the proposed channel estimation algorithm approaches the Bayesian optimal results when the number of antennas tends to infinity and improves the channel estimation accuracy by about 30% compared with the existing algorithms in terms of the normalized mean square error.

eess.SP↗

arXiv2025

Flexible Intelligent Metasurfaces in High-Mobility MIMO Integrated Sensing and Communications

We propose a novel doubly-dispersive (DD) multiple-input multiple-output (MIMO) channel model incorporating flexible intelligent metasurfaces (FIMs), which is suitable for integrated sensing and communications (ISAC) in high-mobility scenarios. We then discuss how the proposed FIM-parameterized DD (FPDD) channel model can be applied in a logical manner to ISAC waveforms that are known to perform well in DD environments, namely, orthogonal frequency division multiplexing (OFDM), orthogonal time frequency space (OTFS), and affine frequency division multiplexing (AFDM). Leveraging the proposed model, we formulate an achievable rate maximization problem with a strong sensing constraint for all the aforementioned waveforms, which we then solve via a gradient ascent algorithm with closed-form gradients presented as a bonus. Our numerical results indicate that the achievable rate is significantly impacted by the emerging FIM technology with careful parametrization essential in obtaining strong ISAC performance across all waveforms suitable to mitigating the effects of DD channels.

eess.SP↗

arXiv2025

Stacked Intelligent Metasurface Assisted Multiuser Communications: From a Rate Fairness Perspective

Stacked intelligent metasurface (SIM) extends the concept of single-layer reconfigurable holographic surfaces (RHS) by incorporating a multi-layered structure, thereby providing enhanced control over electromagnetic wave propagation and improved signal processing capabilities. This study investigates the potential of SIM in enhancing the rate fairness in multiuser downlink systems by addressing two key optimization problems: maximizing the minimum rate (MR) and maximizing the geometric mean of rates (GMR). {The former strives to enhance the minimum user rate, thereby ensuring fairness among users, while the latter relaxes fairness requirements to strike a better trade-off between user fairness and system sum-rate (SR).} For the MR maximization, we adopt a consensus alternating direction method of multipliers (ADMM)-based approach, which decomposes the approximated problem into sub-problems with closed-form solutions. {For GMR maximization, we develop an alternating optimization (AO)-based algorithm that also yields closed-form solutions and can be seamlessly adapted for SR maximization. Numerical results validate the effectiveness and convergence of the proposed algorithms.} Comparative evaluations show that MR maximization ensures near-perfect fairness, while GMR maximization balances fairness and system SR. Furthermore, the two proposed algorithms respectively outperform existing related works in terms of MR and SR performance. Lastly, SIM with lower power consumption achieves performance comparable to that of multi-antenna digital beamforming.

eess.SP↗

arXiv2025

Multi-User Generative Semantic Communication with Intent-Aware Semantic-Splitting Multiple Access

With the booming development of generative artificial intelligence (GAI), semantic communication (SemCom) has emerged as a new paradigm for reliable and efficient communication. This paper considers a multi-user downlink SemCom system, using vehicular networks as the representative scenario for multi-user content dissemination. To address diverse yet overlapping user demands, we propose a multi-user Generative SemCom-enhanced intent-aware semantic-splitting multiple access (SS-MGSC) framework. In the framework, we construct an intent-aware shared knowledge base (SKB) that incorporates prior knowledge of semantic information (SI) and user-specific preferences. Then, we designate the common SI as a one-hot semantic map that is broadcast to all users, while the private SI is delivered as personalized text for each user. On the receiver side, a diffusion model enhanced with ControlNet is adopted to generate high-quality personalized images. To capture both semantic relevance and perceptual similarity, we design a novel semantic efficiency score (SES) metric as the optimization objective. Building on this, we formulate a joint optimization problem for multi-user semantic extraction and beamforming, solved using a reinforcement learning-based algorithm due to its robustness in high-dimensional settings. Simulation results demonstrate the effectiveness of the proposed scheme.

cs.NI↗

arXiv2025

Bridging Physical and Digital Worlds: Embodied Large AI for Future Wireless Systems

Large artificial intelligence (AI) models offer revolutionary potential for future wireless systems, promising unprecedented capabilities in network optimization and performance. However, current paradigms largely overlook crucial physical interactions. This oversight means they primarily rely on offline datasets, leading to difficulties in handling real-time wireless dynamics and non-stationary environments. Furthermore, these models often lack the capability for active environmental probing. This paper proposes a fundamental paradigm shift towards wireless embodied large AI (WELAI), moving from passive observation to active embodiment. We first identify key challenges faced by existing models, then we explore the design principles and system structure of WELAI. Besides, we outline prospective applications in next-generation wireless. Finally, through an illustrative case study, we demonstrate the effectiveness of WELAI and point out promising research directions for realizing adaptive, robust, and autonomous wireless systems.

cs.IT↗

arXiv2025

Joint Task Offloading and Resource Allocation in Low-Altitude MEC via Graph Attention Diffusion

With the rapid development of the low-altitude economy, air-ground integrated multi-access edge computing (MEC) systems are facing increasing demands for real-time and intelligent task scheduling. In such systems, task offloading and resource allocation encounter multiple challenges, including node heterogeneity, unstable communication links, and dynamic task variations. To address these issues, this paper constructs a three-layer heterogeneous MEC system architecture for low-altitude economic networks, encompassing aerial and ground users as well as edge servers. The system is systematically modeled from the perspectives of communication channels, computational costs, and constraint conditions, and the joint optimization problem of offloading decisions and resource allocation is uniformly abstracted into a graph-structured modeling task. On this basis, we propose a graph attention diffusion-based solution generator (GADSG). This method integrates the contextual awareness of graph attention networks with the solution distribution learning capability of diffusion models, enabling joint modeling and optimization of discrete offloading variables and continuous resource allocation variables within a high-dimensional latent space. We construct multiple simulation datasets with varying scales and topologies. Extensive experiments demonstrate that the proposed GADSG model significantly outperforms existing baseline methods in terms of optimization performance, robustness, and generalization across task structures, showing strong potential for efficient task scheduling in dynamic and complex low-altitude economic network environments.

cs.NI↗

arXiv2025

Stacked Intelligent Metasurfaces for Multi-Modal Semantic Communications

Semantic communication (SemCom) powered by generative artificial intelligence enables highly efficient and reliable information transmission. However, it still necessitates the transmission of substantial amounts of data when dealing with complex scene information. In contrast, the stacked intelligent metasurface (SIM), leveraging wave-domain computing, provides a cost-effective solution for directly imaging complex scenes. Building on this concept, we propose an innovative SIM-aided multi-modal SemCom system. Specifically, an SIM is positioned in front of the transmit antenna for transmitting visual semantic information of complex scenes via imaging on the uniform planar array at the receiver. Furthermore, the simple scene description that contains textual semantic information is transmitted via amplitude-phase modulation over electromagnetic waves. To simultaneously transmit multi-modal information, we optimize the amplitude and phase of meta-atoms in the SIM using a customized gradient descent algorithm. The optimization aims to gradually minimize the mean squared error between the normalized energy distribution on the receiver array and the desired pattern corresponding to the visual semantic information. By combining the textual and visual semantic information, a conditional generative adversarial network is used to recover the complex scene accurately. Extensive numerical results verify the effectiveness of the proposed multi-modal SemCom system in reducing bandwidth overhead as well as the capability of the SIM for imaging the complex scene.

cs.IT↗

arXiv2025

TeleMoM: Consensus-Driven Telecom Intelligence via Mixture of Models

Large language models (LLMs) face significant challenges in specialized domains like telecommunication (Telecom) due to technical complexity, specialized terminology, and rapidly evolving knowledge. Traditional methods, such as scaling model parameters or retraining on domain-specific corpora, are computationally expensive and yield diminishing returns, while existing approaches like retrieval-augmented generation, mixture of experts, and fine-tuning struggle with accuracy, efficiency, and coordination. To address this issue, we propose Telecom mixture of models (TeleMoM), a consensus-driven ensemble framework that integrates multiple LLMs for enhanced decision-making in Telecom. TeleMoM employs a two-stage process: proponent models generate justified responses, and an adjudicator finalizes decisions, supported by a quality-checking mechanism. This approach leverages strengths of diverse models to improve accuracy, reduce biases, and handle domain-specific complexities effectively. Evaluation results demonstrate that TeleMoM achieves a 9.7\% increase in answer accuracy, highlighting its effectiveness in Telecom applications.

cs.IT↗

arXiv2025

WirelessMathBench: A Mathematical Modeling Benchmark for LLMs in Wireless Communications

Large Language Models (LLMs) have achieved impressive results across a broad array of tasks, yet their capacity for complex, domain-specific mathematical reasoning-particularly in wireless communications-remains underexplored. In this work, we introduce WirelessMathBench, a novel benchmark specifically designed to evaluate LLMs on mathematical modeling challenges to wireless communications engineering. Our benchmark consists of 587 meticulously curated questions sourced from 40 state-of-the-art research papers, encompassing a diverse spectrum of tasks ranging from basic multiple-choice questions to complex equation completion tasks, including both partial and full completions, all of which rigorously adhere to physical and dimensional constraints. Through extensive experimentation with leading LLMs, we observe that while many models excel in basic recall tasks, their performance degrades significantly when reconstructing partially or fully obscured equations, exposing fundamental limitations in current LLMs. Even DeepSeek-R1, the best performer on our benchmark, achieves an average accuracy of only 38.05%, with a mere 7.83% success rate in full equation completion. By publicly releasing WirelessMathBench along with the evaluation toolkit, we aim to advance the development of more robust, domain-aware LLMs for wireless system analysis and broader engineering applications.

cs.CL↗

arXiv2025

Emerging Technologies in Intelligent Metasurfaces: Shaping the Future of Wireless Communications

Intelligent metasurfaces have demonstrated great promise in revolutionizing wireless communications. One notable example is the two-dimensional (2D) programmable metasurface, which is also known as reconfigurable intelligent surfaces (RIS) to manipulate the wireless propagation environment to enhance network coverage. More recently, three-dimensional (3D) stacked intelligent metasurfaces (SIM) have been developed to substantially improve signal processing efficiency by directly processing analog electromagnetic signals in the wave domain. Another exciting breakthrough is the flexible intelligent metasurface (FIM), which possesses the ability to morph its 3D surface shape in response to dynamic wireless channels and thus achieve diversity gain. In this paper, we provide a comprehensive overview of these emerging intelligent metasurface technologies. We commence by examining recent experiments of RIS and exploring its applications from four perspectives. Furthermore, we delve into the fundamental principles underlying SIM, discussing relevant prototypes as well as their applications. Numerical results are also provided to illustrate the potential of SIM for analog signal processing. Finally, we review the state-of-the-art of FIM technology, discussing its impact on wireless communications and identifying the key challenges of integrating FIMs into wireless networks.

cs.IT↗

arXiv2025

GDSG: Graph Diffusion-based Solution Generator for Optimization Problems in MEC Networks

Optimization is crucial for MEC networks to function efficiently and reliably, most of which are NP-hard and lack efficient approximation algorithms. This leads to a paucity of optimal solution, constraining the effectiveness of conventional deep learning approaches. Most existing learning-based methods necessitate extensive optimal data and fail to exploit the potential benefits of suboptimal data that can be obtained with greater efficiency and effectiveness. Taking the multi-server multi-user computation offloading (MSCO) problem, which is widely observed in systems like Internet-of-Vehicles (IoV) and Unmanned Aerial Vehicle (UAV) networks, as a concrete scenario, we present a Graph Diffusion-based Solution Generation (GDSG) method. This approach is designed to work with suboptimal datasets while converging to the optimal solution large probably. We transform the optimization issue into distribution-learning and offer a clear explanation of learning from suboptimal training datasets. We build GDSG as a multi-task diffusion model utilizing a Graph Neural Network (GNN) to acquire the distribution of high-quality solutions. We use a simple and efficient heuristic approach to obtain a sufficient amount of training data composed entirely of suboptimal solutions. In our implementation, we enhance the backbone GNN and achieve improved generalization. GDSG also reaches nearly 100\% task orthogonality, ensuring no interference between the discrete and continuous generation tasks. We further reveal that this orthogonality arises from the diffusion-related training loss, rather than the neural network architecture itself. The experiments demonstrate that GDSG surpasses other benchmark methods on both the optimal and suboptimal training datasets. The MSCO datasets has open-sourced at this http URL, as well as the GDSG algorithm codes at https://github.com/qiyu3816/GDSG.

cs.NI↗

arXiv2025

Stacked Intelligent Metasurfaces for Wireless Communications: Applications and Challenges

The rapid growth of wireless communications has created a significant demand for high throughput, seamless connectivity, and extremely low latency. To meet these goals, a novel technology -- stacked intelligent metasurfaces (SIMs) -- has been developed to perform signal processing by directly utilizing electromagnetic waves, thus achieving incredibly fast computing speed while reducing hardware requirements. In this article, we provide an overview of SIM technology, including its underlying hardware, benefits, and exciting applications in wireless communications. Specifically, we examine the utilization of SIMs in realizing transmit beamforming and semantic encoding in the wave domain. Additionally, channel estimation in SIM-aided communication systems is discussed. Finally, we highlight potential research opportunities and identify key challenges for deploying SIMs in wireless networks to motivate future research.

cs.IT↗

arXiv2025

Robust Deep Learning-Based Physical Layer Communications: Strategies and Approaches

Deep learning (DL) has emerged as a transformative technology with immense potential to reshape the sixth-generation (6G) wireless communication network. By utilizing advanced algorithms for feature extraction and pattern recognition, DL provides unprecedented capabilities in optimizing the network efficiency and performance, particularly in physical layer communications. Although DL technologies present the great potential, they also face significant challenges related to the robustness, which are expected to intensify in the complex and demanding 6G environment. Specifically, current DL models typically exhibit substantial performance degradation in dynamic environments with time-varying channels, interference of noise and different scenarios, which affect their effectiveness in diverse real-world applications. This paper provides a comprehensive overview of strategies and approaches for robust DL-based methods in physical layer communications. First we introduce the key challenges that current DL models face. Then we delve into a detailed examination of DL approaches specifically tailored to enhance robustness in 6G, which are classified into data-driven and model-driven strategies. Finally, we verify the effectiveness of these methods by case studies and outline future research directions.

cs.IT↗

arXiv2025

Stacked Intelligent Metasurfaces for Multiuser Downlink Beamforming in the Wave Domain

Intelligent metasurface has recently emerged as a promising technology that enables the customization of wireless environments by harnessing large numbers of low-cost reconfigurable scattering elements. However, prior studies have predominantly focused on single-layer metasurfaces, which have limitations in terms of wave-domain processing capabilities due to practical hardware limitations. In contrast, this paper introduces a novel stacked intelligent metasurface (SIM) design. Specifically, we investigate the integration of SIM into the downlink of a multiuser multiple-input single-output (MISO) communication system, where an SIM, consisting of a multilayer metasurface structure, is deployed at the base station (BS) to facilitate transmit beamforming in the electromagnetic wave domain. This eliminates the need for conventional digital beamforming and high-resolution digital-to-analog converters at the BS. To this end, an optimization problem is formulated to maximize the sum rate of all user equipments by jointly optimizing the transmit power allocation at the BS and the wave-based beamforming at the SIM, subject to constraints on the transmit power budget and discrete phase shifts. Furthermore, we propose a computationally efficient algorithm for solving the formulated joint optimization problem and elaborate on the potential benefits of employing SIM in wireless networks. Numerical results are illustrated to corroborate the effectiveness of the proposed SIM-enabled wave-based beamforming design and to evaluate the performance improvement achieved by the proposed algorithm compared to various benchmark schemes. It is demonstrated that considering the same number of transmit antennas, the proposed SIM-based system achieves about 200\% improvement in terms of sum rate compared to conventional MISO systems. The code for this paper is available at \url{https://github.com/JianchengAn}.

cs.IT↗