arXiv subjects

Mérouane Debbah

Publications and source records attributed to Mérouane Debbah.

At least 145 records · Page 8Linked to original sources

arXiv2020

Holographic MIMO Surfaces for 6G Wireless Networks: Opportunities, Challenges, and Trends

Future wireless networks are expected to evolve towards an intelligent and software reconfigurable paradigm enabling ubiquitous communications between humans and mobile devices. They will be also capable of sensing, controlling, and optimizing the wireless environment to fulfill the visions of low-power, high-throughput, massively-connected, and low-latency communications. A key conceptual enabler that is recently gaining increasing popularity is the Holographic Multiple Input Multiple Output Surface (HMIMOS) that refers to a low-cost transformative wireless planar structure comprising of sub-wavelength metallic or dielectric scattering particles, which is capable of impacting electromagnetic waves according to desired objectives. In this article, we provide an overview of HMIMOS communications by introducing the available hardware architectures for reconfigurable such metasurfaces and their main characteristics, as well as highlighting the opportunities and key challenges in designing HMIMOS-enabled communications.

cs.IT↗

arXiv2019

Downlink Performance of Dense Antenna Deployment: To Distribute or Concentrate?

Massive multiple-input multiple-output (massive MIMO) and small cell densification are complementary key 5G enablers. Given a fixed number of the entire base-station antennas per unit area, this paper fairly compares (i) to deploy few base stations (BSs) and concentrate many antennas on each of them, i.e. massive MIMO, and (ii) to deploy more BSs equipped with few antennas, i.e. small cell densification. We observe that small cell densification always outperforms for both signal-to-interference ratio (SIR) coverage and energy efficiency (EE), when each BS serves multiple users via L number of sub-bands (multi-carrier transmission). Moreover, we also observe that larger L increases SIR coverage while decreasing EE, thus urging the necessity of optimal 5G network design. These two observations are based on our novel closed-form SIR coverage probability derivation using stochastic geometry, also validated via numerical simulations.

cs.NI↗

arXiv2019

Wireless Network Intelligence at the Edge

Fueled by the availability of more data and computing power, recent breakthroughs in cloud-based machine learning (ML) have transformed every aspect of our lives from face recognition and medical diagnosis to natural language processing. However, classical ML exerts severe demands in terms of energy, memory and computing resources, limiting their adoption for resource constrained edge devices. The new breed of intelligent devices and high-stake applications (drones, augmented/virtual reality, autonomous systems, etc.), requires a novel paradigm change calling for distributed, low-latency and reliable ML at the wireless network edge (referred to as edge ML). In edge ML, training data is unevenly distributed over a large number of edge nodes, which have access to a tiny fraction of the data. Moreover training and inference is carried out collectively over wireless links, where edge devices communicate and exchange their learned models (not their private data). In a first of its kind, this article explores key building blocks of edge ML, different neural network architectural splits and their inherent tradeoffs, as well as theoretical and technical enablers stemming from a wide range of mathematical disciplines. Finally, several case studies pertaining to various high-stake applications are presented demonstrating the effectiveness of edge ML in unlocking the full potential of 5G and beyond.

cs.IT↗

arXiv2019

Artificial Neural Networks-Based Machine Learning for Wireless Networks: A Tutorial

Next-generation wireless networks must support ultra-reliable, low-latency communication and intelligently manage a massive number of Internet of Things (IoT) devices in real-time, within a highly dynamic environment. This need for stringent communication quality-of-service (QoS) requirements as well as mobile edge and core intelligence can only be realized by integrating fundamental notions of artificial intelligence (AI) and machine learning across the wireless infrastructure and end-user devices. In this context, this paper provides a comprehensive tutorial that introduces the main concepts of machine learning, in general, and artificial neural networks (ANNs), in particular, and their potential applications in wireless communications. For this purpose, we present a comprehensive overview on a number of key types of neural networks that include feed-forward, recurrent, spiking, and deep neural networks. For each type of neural network, we present the basic architecture and training procedure, as well as the associated challenges and opportunities. Then, we provide an in-depth overview on the variety of wireless communication problems that can be addressed using ANNs, ranging from communication using unmanned aerial vehicles to virtual reality and edge caching.For each individual application, we present the main motivation for using ANNs along with the associated challenges while also providing a detailed example for a use case scenario and outlining future works that can be addressed using ANNs. In a nutshell, this article constitutes one of the first holistic tutorials on the development of machine learning techniques tailored to the needs of future wireless networks.

cs.IT↗

arXiv2019

Model-Aided Wireless Artificial Intelligence: Embedding Expert Knowledge in Deep Neural Networks Towards Wireless Systems Optimization

Deep learning based on artificial neural networks is a powerful machine learning method that, in the last few years, has been successfully used to realize tasks, e.g., image classification, speech recognition, translation of languages, etc., that are usually simple to execute by human beings but extremely difficult to perform by machines. This is one of the reasons why deep learning is considered to be one of the main enablers to realize the notion of artificial intelligence. In order to identify the best architecture of an artificial neural network that allows one to fit input-output data pairs, the current methodology in deep learning methods consists of employing a data-driven approach. Once the artificial neural network is trained, it is capable of responding to never-observed inputs by providing the optimum output based on past acquired knowledge. In this context, a recent trend in the deep learning community is to complement pure data-driven approaches with prior information based on expert knowledge. In this work, we describe two methods that implement this strategy, which aim at optimizing wireless communication networks. In addition, we illustrate numerical results in order to assess the performance of the proposed approaches compared with pure data-driven implementations.

cs.IT↗

arXiv2019

Wireless Networks Design in the Era of Deep Learning: Model-Based, AI-Based, or Both?

This work deals with the use of emerging deep learning techniques in future wireless communication networks. It will be shown that data-driven approaches should not replace, but rather complement traditional design techniques based on mathematical models. Extensive motivation is given for why deep learning based on artificial neural networks will be an indispensable tool for the design and operation of future wireless communications networks, and our vision of how artificial neural networks should be integrated into the architecture of future wireless communication networks is presented. A thorough description of deep learning methodologies is provided, starting with the general machine learning paradigm, followed by a more in-depth discussion about deep learning and artificial neural networks, covering the most widely-used artificial neural network architectures and their training methods. Deep learning will also be connected to other major learning frameworks such as reinforcement learning and transfer learning. A thorough survey of the literature on deep learning for wireless communication networks is provided, followed by a detailed description of several novel case-studies wherein the use of deep learning proves extremely useful for network design. For each case-study, it will be shown how the use of (even approximate) mathematical models can significantly reduce the amount of live data that needs to be acquired/measured to implement data-driven approaches. For each application, the merits of the proposed approaches will be demonstrated by a numerical analysis in which the implementation and training of the artificial neural network used to solve the problem is discussed. Finally, concluding remarks describe those that in our opinion are the major directions for future research in this field.

eess.SP↗

arXiv2019

Reconfigurable Intelligent Surfaces for Energy Efficiency in Wireless Communication

The adoption of a Reconfigurable Intelligent Surface (RIS) for downlink multi-user communication from a multi-antenna base station is investigated in this paper. We develop energy-efficient designs for both the transmit power allocation and the phase shifts of the surface reflecting elements, subject to individual link budget guarantees for the mobile users. This leads to non-convex design optimization problems for which to tackle we propose two computationally affordable approaches, capitalizing on alternating maximization, gradient descent search, and sequential fractional programming. Specifically, one algorithm employs gradient descent for obtaining the RIS phase coefficients, and fractional programming for optimal transmit power allocation. Instead, the second algorithm employs sequential fractional programming for the optimization of the RIS phase shifts. In addition, a realistic power consumption model for RIS-based systems is presented, and the performance of the proposed methods is analyzed in a realistic outdoor environment. In particular, our results show that the proposed RIS-based resource allocation methods are able to provide up to $300\%$ higher energy efficiency, in comparison with the use of regular multi-antenna amplify-and-forward relaying.

cs.IT↗

arXiv2019

Indoor Signal Focusing with Deep Learning Designed Reconfigurable Intelligent Surfaces

Reconfigurable Intelligent Surfaces (RISs) comprised of tunable unit elements have been recently considered in indoor communication environments for focusing signal reflections to intended user locations. However, the current proofs of concept require complex operations for the RIS configuration, which are mainly realized via wired control connections. In this paper, we present a deep learning method for efficient online wireless configuration of RISs when deployed in indoor communication environments. According to the proposed method, a database of coordinate fingerprints is implemented during an offline training phase. This fingerprinting database is used to train the weights and bias of a properly designed Deep Neural Network (DNN), whose role is to unveil the mapping between the measured coordinate information at a user location and the configuration of the RIS's unit cells that maximizes this user's received signal strength. During the online phase of the presented method, the trained DNN is fed with the measured position information at the target user to output the optimal phase configurations of the RIS for signal power focusing on this intended location. Our realistic simulation results using ray tracing on a three dimensional indoor environment demonstrate that the proposed DNN-based configuration method exhibits its merits for all considered cases, and effectively increases the achievable throughput at the target user location.

cs.IT↗

arXiv2019

Deep Learning for UL/DL Channel Calibration in Generic Massive MIMO Systems

One of the fundamental challenges to realize massive Multiple-Input Multiple-Output (MIMO) communications is the accurate acquisition of channel state information for a plurality of users at the base station. This is usually accomplished in the UpLink (UL) direction profiting from the time division duplexing mode. In practical base station transceivers, there exist inevitably nonlinear hardware components, like signal amplifiers and various analog filters, which complicates the calibration task. To deal with this challenge, we design a deep neural network for channel calibration between the UL and DownLink (DL) directions. During the initial training phase, the deep neural network is trained from both UL and DL channel measurements. We then leverage the trained deep neural network with the instantaneously estimated UL channel to calibrate the DL one, which is not observable during the UL transmission phase. Our numerical results confirm the merits of the proposed approach, and show that it can achieve performance comparable to conventional approaches, like the Agros method and methods based on least squares, that however assume linear hardware behavior models. More importantly, considering generic nonlinear relationships between the UL and DL channels, it is demonstrated that our deep neural network approach exhibits robust performance, even when the number of training sequences is limited.

cs.IT↗

arXiv2019

Learn2MAC: Online Learning Multiple Access for URLLC Applications

This paper addresses a fundamental limitation of previous random access protocols, their lack of latency performance guarantees. We consider $K$ IoT transmitters competing for uplink resources and we design a fully distributed protocol for deciding how they access the medium. Specifically, each transmitter restricts decisions to a locally-generated dictionary of transmission patterns. At the beginning of a frame, pattern $i$ is chosen with probability $p^i$, and an online exponentiated gradient algorithm is used to adjust this probability distribution. The performance of the proposed scheme is showcased in simulations, where it is compared with a baseline random access protocol. Simulation results show that (a) the proposed scheme achieves good latent throughput performance and low energy consumption, while (b) it outperforms by a big margin random transmissions.

cs.NI↗

arXiv2019

Data Correlation-Aware Resource Management in Wireless Virtual Reality (VR): An Echo State Transfer Learning Approach

In this paper, the problem of wireless virtual reality (VR) resource management is investigated for a wireless VR network in which VR contents are sent by a cloud to cellular small base stations (SBSs). The SBSs will collect tracking data from the VR users, over the uplink, in order to generate the VR content and transmit it to the end-users using downlink cellular links. For this model, the data requested or transmitted by the users can exhibit correlation, since the VR users may engage in the same immersive virtual environment with different locations and orientations. As such, the proposed resource management framework can factor in such spatial data correlation, to better manage uplink and downlink traffic. This potential spatial data correlation can be factored into the resource allocation problem to reduce the traffic load in both uplink and downlink. In the downlink, the cloud can transmit 360 contents or specific visible contents that are extracted from the original 360 contents to the users according to the users' data correlation to reduce the backhaul traffic load. For uplink, each SBS can associate with the users that have similar tracking information so as to reduce the tracking data size. This data correlation-aware resource management problem is formulated as an optimization problem whose goal is to maximize the users' successful transmission probability, defined as the probability that the content transmission delay of each user satisfies an instantaneous VR delay target. To solve this problem, an echo state networks (ESNs) based transfer learning is introduced. By smartly transferring information on the SBS's utility, the proposed transfer-based ESN algorithm can quickly cope with changes in the wireless networking environment.

cs.IT↗

arXiv2019

Self-Tuning Spectral Clustering for Adaptive Tracking Areas Design in 5G Ultra-Dense Networks

In this paper, we address the issue of automatic tracking areas (TAs) planning in fifth generation (5G) ultra-dense networks (UDNs). By invoking handover (HO) attempts and measurement reports (MRs) statistics of a 4G live network, we first introduce a new kernel function mapping HO attempts, MRs and inter-site distances (ISDs) into the so-called similarity weight. The corresponding matrix is then fed to a self-tuning spectral clustering (STSC) algorithm to automatically define the TAs number and borders. After evaluating its performance in terms of the $Q$-metric as well as the silhouette score for various kernel parameters, we show that the clustering scheme yields a significant reduction of tracking area updates and average paging requests per TA; optimizing thereby network resources.

cs.IT↗

arXiv2018

Risk-Sensitive Reinforcement Learning for URLLC Traffic in Wireless Networks

In this paper, we study the problem of dynamic channel allocation for URLLC traffic in a multi-user multi-channel wireless network where urgent packets have to be successfully transmitted in a timely manner. We formulate the problem as a finite-horizon Markov Decision Process with a stochastic constraint related to the QoS requirement, defined as the packet loss rate for each user. We propose a novel weighted formulation that takes into account both the total expected reward (number of successfully transmitted packets) and the risk which we define as the QoS requirement violation. First, we use the value iteration algorithm to find the optimal policy, which assumes a perfect knowledge of the controller of all the parameters, namely the channel statistics. We then propose a Q-learning algorithm where the controller learns the optimal policy without having knowledge of neither the CSI nor the channel statistics. We illustrate the performance of our algorithms with numerical studies.

cs.NI↗

arXiv2018

Classification Algorithms for Semi-Blind Uplink/Downlink Decoupling in sub-6 GHz/mmWave 5G Networks

Reliability and latency challenges in future mixed sub-6 GHz/millimeter wave (mmWave) fifth generation (5G) cell-free massive multiple-input multiple-output (MIMO) networks is to guarantee a fast radio resource management in both uplink (UL) and downlink (DL), while tackling the corresponding propagation imbalance that may arise in blockage situations. In this context, we introduce a semi-blind UL/DL decoupling concept where, after its initial activation, the central processing unit (CPU) gathers measurements of the Rician $K$-factor---reflecting the line-of-sight (LOS) condition of the user equipment (UE)---as well as the DL reference signal receive power (RSRP) for both 2.6 GHz and 28 GHz frequency bands, and then train a non-linear support vector machine (SVM) algorithm. The CPU finally stops the measurements of mmWave definitely, and apply the trained SVM algorithm on the 2.6 GHz data to blindly predict the target frequencies and access points (APs) that can be independently used for the UL and DL. The accuracy score of the proposed classifier reaches $95\%$ for few training samples.

cs.IT↗

arXiv2018

Ultra-Reliable and Low-Latency Wireless Communication: Tail, Risk and Scale

Ensuring ultra-reliable and low-latency communication (URLLC) for 5G wireless networks and beyond is of capital importance and is currently receiving tremendous attention in academia and industry. At its core, URLLC mandates a departure from expected utility-based network design approaches, in which relying on average quantities (e.g., average throughput, average delay and average response time) is no longer an option but a necessity. Instead, a principled and scalable framework which takes into account delay, reliability, packet size, network architecture, and topology (across access, edge, and core) and decision-making under uncertainty is sorely lacking. The overarching goal of this article is a first step to fill this void. Towards this vision, after providing definitions of latency and reliability, we closely examine various enablers of URLLC and their inherent tradeoffs. Subsequently, we focus our attention on a plethora of techniques and methodologies pertaining to the requirements of ultra-reliable and low-latency communication, as well as their applications through selected use cases. These results provide crisp insights for the design of low-latency and high-reliable wireless networks.

cs.IT↗

arXiv2018

Achievable Rate maximization by Passive Intelligent Mirrors

This paper investigates the use of a Passive Intelligent Mirrors (PIM) to operate a multi-user MISO downlink communication. The transmit powers and the mirror reflection coefficients are designed for sum-rate maximization subject to individual QoS guarantees to the mobile users. The resulting problem is non-convex, and is tackled by combining alternating maximization with the majorization-minimization method. Numerical results show the merits of the proposed approach, and in particular that the use of PIM increases the system throughput by at least $40\%$, without requiring any additional energy consumption.

cs.IT↗

arXiv2018

Design of 5G Full Dimension Massive MIMO Systems

Massive multiple-input-multiple-output (MIMO) transmission is a promising technology to improve the capacity and reliability of wireless systems. However, the number of antennas that can be equipped at a base station (BS) is limited by the BS form factor, posing a challenge to the deployment of massive linear arrays. To cope with this limitation, this work discusses Full Dimension MIMO (FD-MIMO), which is currently an active area of research and standardization in the 3rd Generation Partnership Project (3GPP) for evolution towards fifth generation (5G) cellular systems. FD-MIMO utilizes an active antenna system (AAS) with a 2D planar array structure, which provides the ability of adaptive electronic beamforming in the 3D space. This paper presents the design of the AAS and the ongoing efforts in the 3GPP to develop the corresponding 3D channel model. Compact structure of large-scale antenna arrays drastically increases the spatial correlation in FD-MIMO systems. In order to account for its effects, the generalized spatial correlation functions for channels constituted by individual antenna elements and overall antenna ports in the AAS are derived. Exploiting the quasi-static channel covariance matrices of the users, the problem of determining the optimal downtilt weight vector for antenna ports, which maximizes the minimum signal-to-interference ratio of a multi-user multiple-input-single-output system, is formulated as a fractional optimization problem. A quasi-optimal solution is obtained through the application of semi-definite relaxation and Dinkelbach's method. Finally, the user-group specific elevation beamforming scenario is devised, which offers significant performance gains as confirmed through simulations. These results have direct application in the analysis of 5G FD-MIMO systems.

cs.IT↗

arXiv2018

Mean-Field Game Theoretic Edge Caching in Ultra-Dense Networks

This paper investigates a cellular edge caching problem under a very large number of small base stations (SBSs) and users. In this ultra-dense edge caching network (UDCN), conventional caching algorithms are inapplicable as their complexity increases with the number of small base stations (SBSs). Furthermore, the performance of UDCN is highly sensitive to the dynamics of user demand and inter-SBS interference. To overcome such difficulties, we propose a distributed caching algorithm under a stochastic geometric network model, as well as a spatio-temporal user demand model that characterizes the content popularity dynamics. By exploiting mean-field game (MFG) theory, the complexity of the proposed UDCN caching algorithm becomes independent of the number of SBSs. Numerical evaluations validate that the proposed caching algorithm reduces not only the long run average cost of the network but also the redundant cached data respectively by 24% and 42%, compared to a baseline caching algorithm. The simulation results also show that the proposed caching algorithm is robust to imperfect popularity information, while ensuring a low computational complexity.

cs.NI↗