Searcharxiv⌕ Search

arXiv subjects

M. A. Ali

Publications and source records attributed to M. A. Ali.

At least 19 recordsLinked to original sources
arXiv2025

Outstanding figure of merit at high temperature for DFT-based predicted double perovskite oxides, Ba2GaXO6 (X = V, Nb, Ta)

Thermoelectric materials with a high figure of merit (ZT) are highly demanded for a sustainable solution to the energy crisis. In this study, we have predicted three new double perovskite oxides (DPOs), Ba2GaXO6 (X = V, Nb, Ta), with high ZT values using density functional theory (DFT) calculations and investigated their structural, electronic, thermoelectric, and mechanical properties. The electronic properties, such as electronic band structure, density of states (DOS), and charge density mapping, are used to disclose the conductive nature, chemical bonding within these compounds, which exhibit direct band gaps of 0.924, 2.354, and 3.279 eV for Ba2GaVO6, Ba2GaNbO6, and Ba2GaTaO6, respectively, as calculated using the TB mBJ potential. The thermoelectric performance of the new DPOs, Ba2GaXO6 (X = V, Nb, Ta), was assessed using the BoltzTrap2 code, which yielded outstanding ZT values of 2.36, 1.78, and 1.91 at 1500 K for Ba2GaVO6, Ba2GaNbO6, and Ba2GaTaO6, respectively, indicating their potential for waste heat management. The high ZT values are attributed to an ultra low lattice thermal conductivity, arising from strong scattering of acoustic and optical phonon modes. The changes in thermoelectric parameters with temperature were analyzed and explained.

cond-mat.mtrl-sci↗
arXiv2025

DFT prediction of new o-MAX phases: Mo2A2AlC3 (A = Zr, Nb, Ta) for next-generation thermal barrier coatings

The incorporation of o-MAX phases, characterized by out-of-plane atomic arrangements, provides valuable extensions to the MAX phase family, driven by their superior thermomechanical properties, which are suitable for high-temperature applications. In this research, three novel o-MAX phases, Mo2A2AlC3 (A = Zr, Nb, Ta), have been newly explored, and their structural geometry, electronic properties, mechanical behavior, thermodynamic characters, and optical response have been comprehensively investigated employing density functional theory (DFT) for the first time.

cond-mat.mtrl-sci↗
arXiv2024

DFT mediated X2AuYZ6 (X= Cs, Rb; Z= Cl, Br, I) double Perovskites for photovoltaic and wasted heat management device applications

This paper presents the phase stability, opto-electronic and thermo-electric behavior of X2AuYZ6 (X = Cs, Rb; Z = Cl/Br/I) double perovskite halides by using the DFT method. The compounds belong to the cubic arrangement and are verified by the tolerance and octahedral factor. Formation enthalpy and binding energy meet the requirements of structural stability. The ductility behavior was also confirmed by the Cauchy pressure, Pugh's ratio, and Poisson's ratio. The positive frequency of phonon dispersion except Rb2AuYI6 compound shows the dynamical stability and the negative formation energy of each identified competing phase confirms the thermo-dynamic equilibrium of all compounds. The band gap values of 2.85(2.91), 2.35(2.40), and 1.74(1.78) eV of Cs2AuYZ6 (Rb2AuYZ6) [Z = Cl, Br, I) double perovskites has been explored in the context of optoelectronic properties, and the results show that these materials might be useful in such devices. The spectral optical response covers the visible-to-UV area, which governs the solar cell and thermo-electric device applications. A comprehensive study of thermo-electric properties such as the thermal conductivity (electrical and electronic part), carrier concentration, thermo-power, and figure of merit was also observed. The investigated compounds [Cs (Rb)-based] exhibit ZT values of 0.51(0.55), 0.53(0.62), and 0.58(0.75) at room temperature with Cl, Br, and I respectively. Additional routine work was also done on the thermo-mechanical characteristics. These studies provide in-depth knowledge of these materials in preparation for their future use.

cond-mat.mtrl-sci↗
arXiv2023

Oxysulfide Perovskites: Reduction of the Electronic Band Gap of RbTaO3 by Sulfur Substitution to Enhance Prospective Solar Cell and Thermoelectric Performances

In this study, the effects of sulfur substitution on the structural, mechanical, electronic, optical, and thermodynamic properties of RbTaO3-xSx have been investigated using the WIEN2k code in the framework of density functional theory (DFT). The cubic phase of RbTaO3 transforms to tetragonal for RbTaO2S and RbTaOS2, the later transforms again to a cubic phase with added sulfur for RbTaS3. The results showed that substituting S for O anions in RbTaO3 effectively decreased the band gap from 2.717 eV to 1.438 eV, 0.286 eV, and 0.103 eV for the RbTaO3,RbTaO2S, RbTaOS2, and RbTaS3 compounds, respectively. The optical constants such as dielectric constants, refractive index, absorption coefficient, photoconductivity, reflectivity and loss function have been calculated and analyzed. The elastic constants and moduli, and their anisotropic nature were also investigated. Finally, the Debye temperature, thermal conductivity, melting temperature, specific capacities and thermal expansion coefficients were computed and analyzed using established formalisms. The reduced band gap (1.438 eV) and high absorption coefficient (~106 cm-1) of RbTaO2S makes it suitable for solar cell applications and for other visible light devices. Reduction of the band gap and phonon thermal conductivity owing to Ssubstitution is expected to enhance thermoelectric performances of the S-containing phases

cond-mat.mtrl-sci↗
arXiv2023

DFT aided prediction of phase stability, optoelectronic and thermoelectric properties of A2AuScX6 (A= Cs, Rb; X= Cl, Br, I) double perovskites for energy harvesting technology

In this work, density functional theory (DFT) is used to find out the ground state structures of A2AuScX6 (A= Cs, Rb; X= Cl, Br, I) double Perovskite (DP) halides for the first time. The DP A2AuScX6 halides were studied for their structural phase stability and optoelectronic properties in order to identify potential materials for energy harvesting systems. The stability criteria were verified by computing the formation energy, binding energy, phonon dispersion curve, stiffness constants, tolerance, and octahedral factors. The electronic band structure, carrier effective mass, density of states (DOS), and charge density distribution were calculated to reveal the nature of electronic conductivity and the chemical bonding nature present within them. For Cs2AuScX6 (Rb2AuScX6) [X = Cl, Br, I], the corresponding values of band gap [using TB-mBJ] are 1.88 (1.93), 1.68 (1.71), and 1.30 (1.32) eV. The optical constants (dielectric function, absorption coefficient, refractive index, energy loss function, photoconductivity, and reflectivity) were also calculated to get more insights into their electronic nature. For Cs2AuScX6 (Rb2AuScX6) [X = Cl, Br, I], the absorption coefficient in the visible range are 3.33 (3.45) 105 cm-1, 2.70 (2.81) 105 cm-1, and 2.13 (2.18) 105 cm-1, respectively. We also investigated the thermoelectric properties to predict promising applications in thermoelectric devices. Our calculations revealed high ZT values of 0.92, 1.07, and 1.06 for Cs2AuScX6 (X = Cl, Br, I) and 0.97, 0.99, and 1.01 for Rb2AuScX6 (X = Cl, Br, I) at 300 K. To further aid in predicting any novel materials, routine research was also done on the thermo-mechanical characteristics. The results suggest the compounds considered as potential candidates for use in solar cells and/or thermoelectric devices.

cond-mat.mtrl-sci↗
arXiv2023

Ab-initio insights into the physical properties of XIr3 (X = La, Th) superconductors: A comparative analysis

Here we report the structural, elastic, bonding, thermo-mechanical, optoelectronic and superconducting state properties of recently discovered XIr3 (X = La, Th) superconductors utilizing the density functional theory (DFT). The elastic, bonding, thermal and optical properties of these compounds are investigated for the first time. The calculated lattice and superconducting state parameters are in reasonable agreement to those found in the literature. In the ground state, both the compounds are mechanically stable and possess highly ductile character, high machinability, low Debye temperature, low bond hardness and significantly high melting point. The thermal conductivities of the compounds are found to be very low which suggests that they can be used for thermal insulation purpose. The population analysis and charge density distribution map confirm the presence of both ionic and covalent bonds in the compounds with ionic bond playing dominant roles. The calculated band structure and DOS profiles indicate metallic character. Unlike the significant anisotropy observed in elastic and thermal properties, all the optical constants of these compounds exhibit almost isotropic behavior. The optical constants correspond very well with the electronic band structure and DOS features. We have estimated the superconducting transition temperature of the compounds in this work.

cond-mat.mtrl-sci↗
arXiv2023

Comprehensive first-principles insights into the physical properties of intermetallic Zr$_3$Ir: a noncentrosymmetric superconductor

We have looked into the structural, mechanical, optoelectronic, superconducting state and thermophysical aspects of intermetallic compound Zr$_3$Ir using the density functional theory (DFT). Many of the physical properties, including direction dependent mechanical properties, Vickers hardness, optical properties, chemical bonding nature, and charge density distributions, are being investigated for the first time. According to this study, Zr$_3$Ir exhibits ductile features, high machinability, significant metallic bonding, a low Vickers hardness with low Debye temperature, and a modest level of elastic anisotropy. The mechanical and dynamical stabilities of Zr$_3$Ir have been confirmed. The metallic nature of Zr$_3$Ir is seen in the electronic band structures with a high electronic energy density of states at the Fermi level. The bonding nature has been explored by the charge density mapping and bond population analysis. The tetragonal Zr$_3$Ir shows a remarkable electronic stability, as confirmed by the presence of a pseudogap in the electronic energy density of states at the Fermi level between the bonding and antibonding states. Optical parameters show very good agreement with the electronic properties. The reflectivity spectra reveal that Zr$_3$Ir is a good reflector in the infrared and near-visible regions. Zr$_3$Ir is an excellent ultra-violet (UV) radiation absorber. High refractive index at visible photon energies indicates that Zr$_3$Ir could be used to improve the visual aspects of electronic displays. All the optical constants exhibit a moderate degree of anisotropy. Zr$_3$Ir has a moderate melting point, high damage tolerance, and very low minimum thermal conductivity. The thermomechanical characteristics of Zr$_3$Ir reveal that it is a potential thermal barrier coating material. The superconducting state parameters of Zr$_3$Ir are also explored.

cond-mat.mtrl-sci↗
arXiv2023

DFT insights into MAX phase borides Hf2AB [A = S, Se, Te] in comparison with MAX phase carbides Hf2AC [A = S, Se, Te]

In this work, density functional theory (DFT) based calculations were performed to compute the physical properties (structural stability, mechanical behavior, electronic, thermodynamic, and optical properties) of synthesized MAX phases Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, Hf2TeB, and the as-yet-undiscovered MAX carbide phase Hf2TeC. Calculations of formation energy, phonon dispersion curves, and elastic constants confirmed the stability of the aforementioned compounds. The obtained values of lattice parameters, elastic constants, and elastic moduli of Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, and Hf2TeB showed fair agreement with earlier studies, whereas the values of the mentioned parameters for the predicted Hf2TeC exhibit a good consequence of B replacement by C. The anisotropic mechanical properties are exhibited by the considered MAX phases. The metallic nature and its anisotropic behavior were revealed by the electronic band structure and density of states. The analysis of the thermal properties Debye temperature, melting temperature, minimum thermal conductivity, and Gruneisen parameter confirmed that the carbide phases were more suited than the boride phases considered herein. The MAX phase response to incoming photons further demonstrated that they were metallic. Their suitability for use as coating materials to prevent solar heating was demonstrated by the reflectivity spectra. Additionally, this study demonstrated the impact of B replacing C in the MAX phases.

cond-mat.mtrl-sci↗
arXiv2023

A comprehensive ab-initio insights into the pressure dependent mechanical, phonon, bonding, electronic, optical, and thermal properties of CsV3Sb5 Kagome compound

In this paper, we have presented a comprehensive study of the physical properties of Kagome superconductor CsV3Sb5 using the density functional theory (DFT). The structural, mechanical, electronic, atomic bonding, hardness, thermodynamic, and optical properties, and their pressure dependences have been investigated for the first time. The calculated ground state lattice parameters and volume are in excellent agreement with available experimental results. The estimated single-crystal elastic constants ensured the mechanical stability of the compound, whereas phonon spectra endorse dynamical stability at zero pressure. The electronic band structure, energy density of states, optical properties confirmed the metallic features. The Pugh ratio, Poisson's ratio of the compound revealed softness and ductility. The hardness, estimated from several formulae, is quite low while the machinability index predicted good machinability with excellent dry lubricating properties. The compound shows tendency towards structural instability at a pressure around 18 GPa. The optical constants have also been studied to correlate those with electronic properties and to predict possible applications of this compound. Both mechanical and optical properties show anisotropy.CsV3Sb5 is predicted to be an efficient absorber of ultraviolet radiation. The compound is also an efficient reflector of visible light.

cond-mat.mtrl-sci↗
arXiv2023

Enhancement of photocatalytic performance of V2O5 by rare-earth ions doping, synthesized by facile hydrothermal technique

The rare-earth (RE) elements [Holmium (Ho) and Ytterbium (Yb)] doped vanadium pentoxide (V2O5) with a series of doping concentrations (1 mol.%, 3 mol.%, and 5 mol.%) have been successfully synthesized using environment-friendly facile hydrothermal method. The effect of RE ions on the photocatalytic efficiency of doped V2O5 has also been analyzed. The stable orthorhombic crystal structure of doped V2O5 confirms by the X-ray diffraction with no secondary phase, and high-stressed conditions are generated for the 3 mol.%. The crystallite size, strain, and dislocation density are calculated to perceive the doping effect on the bare V2O5. The optical characteristics have been measured using UV-vis spectroscopy. The absorptions are found to be increased with increasing doping concentrations; however, the bandgap remains in the visible range. The photocatalytic properties are examined for the compounds with varying pH, and it is observed that higher efficiency is exhibited for the pH 7 and catalyst concentration 500 ppm. The highest degradation efficiency is found to be 93% and 95% for the 3 mol.% of Ho and Yb-doped V2O5 samples within 2 hours, respectively. It is elucidated that the RE ions significantly impact the catalytic behavior of V2O5, and the mechanism behind these extraordinary efficiencies has been explained thoroughly.

physics.chem-ph↗
arXiv2022

High pressure mediated physical properties of Hf2AB (A = Pb, Bi) via DFT calculations

Using density functional theory (DFT), the structural, mechanical, electronic, thermal, and optical properties of Hf2AB (A = Pb, Bi) borides were studied, considering the pressure effect up to 50 GPa. The lattice constants were found to be decreased with increasing pressure wherein the lattice constants at 0 GPa agree well with the reported values. The stability (mechanical and dynamical) of the titled compounds at different pressures was checked. The mechanical behavior was disclosed considering the bulk modulus, shear modulus, Youngs modulus, Pugh ratio, Poissons ratio, and hardness parameter at different pressures. Pugh and Poisson ratios were used to assess the brittleness and ductility of the titled borides. The anisotropic nature of mechanical properties was studied by calculating different indices and plotting 2D and 3D projections of the elastic moduli. The electronic properties were revealed by calculating the band structure, density of states, and charge density mapping at different pressures, wherein the anisotropic nature of the electronic conductivity was noted. We studied the Debye temperature, minimum thermal conductivity, Gruneisen parameter, and melting temperature of the titled borides at different pressures; the results revealed the improvement of the mentioned properties with rising pressure. The important optical constants to disclose the possible relevance in application purposes were investigated; a little pressure effect was noted. The thermal properties suggest that the titled borides could be used as thermal barrier coating (TBC) materials while the reflectivity spectra revealed their suitability to be used as cover materials for protection from solar heating.

cond-mat.mtrl-sci↗
arXiv2022

The rise of 212 MAX phase borides, Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S]: DFT insights into the physical properties for thermo-mechanical applications

An interesting class of ternary metallic borides, known as the 212 MAX phase borides, is the recent advancement of the MAX phase family. In this article, results from ab-initio calculations on unexplored Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] are reported wherein Ti$_2$PB$_2$ along with its 211 boride phase Ti$_2$PB are predicted for the first time. The stability was confirmed by calculating the formation energy, phonon dispersion curve, and elastic stiffness constants. The obtained elastic constants, elastic moduli, and Vickers hardness values of Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] were found to be significantly larger than those of their counterparts 211 borides and carbides, in a trend similar to other 212 borides. The studied compounds are brittle like most of the MAX and MAB phases. The electronic band structure and density of states revealed the metallic nature of the titled borides. Several thermal parameters were explored, certifying the suitability of Ti2PB2, Zr2PbB2, and Nb2AB2 [A = P, S] compared to their counterparts, and a similar trend was found for the other 212 borides. The obtained results predict that Ti2PB2, Zr2PbB2, and Nb2AB2 [A = P, S] have significant potential for use as efficient thermal barrier coating materials. The response of Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] to the incident photon was studied by computing the dielectric constant (real and imaginary part), refractive index, absorption coefficient, photoconductivity, reflectivity, and energy loss function. The ability to protect from solar heating was revealed from the studied reflectivity spectra. In this work, we have explored the physical basis of the improved thermo-mechanical properties of 212 MAX phase borides compared to their carbide and boride counterparts.

cond-mat.mtrl-sci↗
arXiv2022

Unravelling the stability, electronic and physical properties in bulk and (001)-surfacesof newlysynthesized Ti2ZnX (X=C, N)MAX phases

MAX phase family has been extended by the addition of late transition metals at the A-site with the expectation of diverse functional properties, such as magnetism and catalysis. Here, we present our systematic density functional investigation on the phase stability and physical properties of newly synthesized Ti2ZnX (X = C, N) phasesin comparison with conventional Ti2AlX (X = C, N).Due to smaller size of N as compared to C, the unit cell dimensionis reduced when C atoms are replaced by N atoms atthe X-site. The thermodynamic, mechanical and dynamical stabilities are validatedby estimating the formation energies, elastic constants and phonon dispersions, respectively. The elastic properties of Ti2ZnN are nearly isotropic while those of Ti2ZnC are completely anisotropic. To understand the thin-film characteristicsin Ti2ZnX, the surface properties with (001)-terminated slabs are investigated. Both Ti2ZnX bulk and (001)-surfaces exhibit metal-like electronic structure. There is a strong covalent bonding between Ti-X and Ti-Zn atoms.Additional states are generated at the Fermi level (EF) due to the unusual d-pstates hybridization between Ti and Zn atoms.The anisotropy in chemical bonding is confirmed by the cleavage energy difference between Ti-X and Ti-Zn atoms. Here,Ti(X)-001 and Zn-001 terminations are stable surfaces, however, in terms of chemical potentials, Zn-001 termination is the most favorable.

cond-mat.mtrl-sci↗
arXiv2022

DFT insights into the new Hf-based chalcogenide MAX phase Hf2SeC

The physical characteristics of the novel chalcogenide MAX phase Hf2SeC have been investigated using the DFT method. The obtained lattice constant and elastic constants (Cij) are compared with previous results to check the consistency of our setting parameters during calculations Moreover, the elastic properties such as elastic constants, moduli, anisotropy, and hardness are also compared with preexisting MAX phases of its kind. The checking of mechanical stability has been done based on Cij in accordance with the previously stated stability criteria. The reason for the higher hardness of Hf2SeC compared to Hf2SC is explained using the density of states (DOS). The brittleness character of Hf2SeC has been revealed using the Pugh ratio, Poisson ratio, and Cauchy pressure. The electronic properties (band structure and charge density mapping) of Hf2SeC are studied to disclose the metallic nature as well as bonding nature within the titled chalcogenide. The anisotropy in both electronic conductivity and mechanical properties is investigated. The temperature and pressure dependence of volume, Grüneisen parameter, Debye temperature, thermal expansion coefficient (TEC), and specific heat at constant volume (Cv) are explored. In addition, minimum thermal conductivity (Kmin) and melting point (Tm) are studied to explore its suitability for high-temperature applications.

cond-mat.mtrl-sci↗
arXiv2021

Newly synthesized 3D boron-rich chalcogenides B12X (X = S, Se): Theoretical characterization of physical properties for optoelectronic and mechanical applications

Boron rich chalcogenides have been predicted to have excellent properties for optical and mechanical applications in recent times. In this regard, we report the electronic, optical and mechanical properties of recently synthesized boron rich chalcogenide compounds, B12X (X = S and Se) using density functional theory for the first time. The effects of exchange and correlation functional on these properties are also investigated. The consistency of the obtained crystal structure with the reported experimental results has been checked in terms of lattice parameters. The considered materials are mechanically stable, brittle and elastically anisotropic. Furthermore, the elastic moduli and hardness parameters are calculated, which show that B12S is likely to be a prominent member of hard materials family compared to B12Se. The origin of different in hardness is explained on the basis of density of states near the Fermi level. Reasonably good values of fracture toughness and machinability index for B12X (X= S and Se) are reported. The melting point, Tm for the B12S and B12Se compounds suggests that both solids are stable, at least up to 4208 and 3577 K, respectively. Indirect band gap of B12S (2.27 eV) and B12Se (1.30 eV) are obtained using the HSE06 functional.The electrons of B12Se compound show lighter average effective mass compared to that of B12S compound, which signifies higher mobility of charge carriers in B12Se. The optical properties are characterized using GGA-PBE and HSE06 method and discussed in detail. These compounds possess bulk optical anisotropy and excellent absorption coefficients in visible light region along with very low static value of reflectivity spectra (range: 7.42-14.0% using both functionals) are noted. Such useful features of the compounds under investigation show promise for applications in optoelectronic and mechanical sectors.

cond-mat.mtrl-sci↗
arXiv2021

Enhanced thermo-mechanical properties of 212 MAX phase borides Zr2AB2 (A = In, Tl): an ab-initio understanding

The discovery of MAX phase borides has added a new dimension for research in the materials science community. In this paper, a first-principles study of the newly known MAX phase borides Zr2AB2 (A = In, Tl) has been carried out. The estimated lattice constants and volumes of the unit cell are found to be consistent with previous study. The dynamical and mechanical stability of the titled compounds have been checked. Fundamental insights into the stiffness constants, elastic moduli, hardness parameters, brittleness and anisotropy indices are presented. The Variation of these mechanical properties was explained based on the Mulliken population analysis and charge density mapping (CDM). The electronic properties have been dealt with by considering electronic band structure and density of states (DOS) which confirmed the metallic nature of Zr2AB2 (A = In, Tl). The lowly dispersive energy bands along the c-direction confirmed anisotropy in conductivity. The analysis of DOS revealed the dominant contribution from Zr-d orbitals to the conductivity with a small contribution from the In/Tl-p states contributing at the Fermi level. The Debye temperature (Theta-D), minimum thermal conductivity (Kmin), Gruneisen parameter and melting temperature (Tm) have been calculated. The higher values of Theta-D and Tm, and lower value of Kmin for Zr2AB2 (A = In, Tl) compared to those of Zr2AC (A = In, Tl). Besides, the specific heat capacities, thermal expansion coefficient, and different thermodynamic potential functions have been calculated. The optical constants have been studied to reveal their possible relevance for application purposes. The reflectivity spectra revealed the applicability of Zr2AB2 (A = In, Tl) as cover materials to diminish the solar heating. The studied physical properties of Zr2AB2 (A = In, Tl) are compared with those of other relevant 212 and 211 MAX phase nanolaminates.

cond-mat.mtrl-sci↗
arXiv2021

Newly synthesized MAX phase Zr2SeC: DFT insights into physical properties towards possible applications

A DFT study of the synthesized MAX phase Zr2SeC has been carried out for the first time to explore its physical properties for possible applications in many sectors. The studied properties are compared with prior known MAX phase Zr2SC. The structural parameters (lattice constants, volume, and atomic positions) are observed to be consistent with earlier results. The band structure and density of states (DOS) are used to explore the metallic conductivity, anisotropic electrical conductivity, and the dominant role of Zr-d states to the electrical conductivity. Analysis of the peaks in the DOS and charge density mapping (CDM) of Zr2SeC and Zr2SC revealed the possible variation of the mechanical properties and hardness among them. The mechanical stability has been checked using elastic constants. The values of the elastic constants, elastic moduli and hardness parameters of Zr2SeC are found to be lowered than those of Zr2SC. The anisotropic behavior of the mechanical properties has been studied and analyzed. Technologically important thermodynamic properties such as the thermal expansion coefficient, Debye temperature, entropy, heat capacity at constant volume, Gruneisen parameter along with volume and Gibbs free energy are investigated as a function of both temperature (0 to 1600 K) and pressure (0 to 50 GPa). Besides, the ΘD, minimum thermal conductivity (Kmin), melting point (Tm), and γ have also been calculated at room temperature and found to be lowered for Zr2SeC compared to Zr2SC owing to their close relationship with the mechanical parameters. The value of the ΘD, Kmin, Tm, and TEC suggest Zr2SeC as a thermal barrier coating material. The dielectric constant (real and imaginary part), refractive index, extinction coefficient, absorption coefficient, photoconductivity, reflectivity, and loss function of Zr2SeC are computed and analyzed.

cond-mat.mtrl-sci↗